Railway stretchers were carried in all Guards Vans on Victorian Railway trains, for use when an accident occurred. Regular training and annual events in first aid competitions ensured most staff were well versed in the requirements of an emergency. Historic - Victorian Railways - First aid stretcher Timber stretcher, two beams encased in canvas with extendable metal straps.VICTORIAN RAILWAYS 513 / SUBURBAN TRAIN FLINDERS STREETrailway stretcher, victorian railways, puffing billy, first aid stretcher, suburban trains, flinders street, guards van, health and safety

Sectioned by Dr. Geoffrey Kaye.A metal inhaler which has been sectioned to reveal the interior, painted in red and blue to indicate direction of air flow. The large, bowl-like opening with metal gauze for attachment of a rebreather bag has been painted red, and the metal mask at the other end has been painted brown. The mask and bag mount meet at a 90-degree angle. inhaler, somnoform, anaesthesia

This is a cotton webbing back-pack. It has a flap which has 2 straps to hold it shut. On the back are 2 x 50 mm short straps with 2 x 25mm brass buckles. At the bottom are two web straps sewn on both ends. Inside, attached to the Left and right wall are short flaps with one eyelet.On the flap is written " VX723648" "N C Stevens".back pack, equipment, army, ww2

Designed by Raymond Lavender, American Printing House for the Blind, it was produced between 1962-1982. A modernized Braille writer, the Lavender allowed the paper to exit through the cover in a way similar to a typewriter. The keys are rectangular and the design is compact with no protruding parts. The cover, which is an integral part of the design, snaps on the case. The case and cover are made of Cycolac, a high impact resistant plastic. After the writer was in use for some time, it was discovered that the plastic material tended to warp and production was discontinued. (Information from the American Printing House for the Blind website). Lavender Braille Writer consisting of an oblong shaped structure made out of a beige coloured metal base with cream coloured keys and a beige coloured hard plastic cover. Braille letters are achieved by punching the various keys. A metallic handle is included.Beige coloured plastic rectangle object with cream buttons and silver returns lever with covering boxbraille equipment, assistive devices

passchendaele barracks trust

This portable braille writer was made for the Royal Institute for the Blind, England. It embosses a roll of paper tape. A folding arm, which extends 29 centimetres beyond the width of the braille writer, holds the tape. The braille writer has six conventional keys and a spacing key. The bottom of the wooden carrying case serves as a base and is lined with green felt. It was manufactured by J.M. Glauser and Sons, who produced several braille writers in the period 1930-1950.Metal portable braille writer in a wooden box "JMG No. 17" is stamped on top of the machine.braille equipment, assistive devices

Khaki over the shoulder field case for maps or documents. The backing base is covered in cotton khaki material with bottom press stud closure buttons. Maps or documents are held in place by adjustable slide over clips. On the inside of the cover there are six sewn in narrow pockets for pens, pencils and relevant recording items.passchendaele barracks trust, field case, maps and documents

11835 - Heliograph mirror with plastic sight. 11835. A - Small saw blade wrapped in black tape. 11835.B - One safetly pin wrapped in greaseproof paper. (all found in flying vest 11386 pockets)survival equipment

Steel Builders Plugging Chisel used by a Bricklayerstawell

This large, ten-spoked wheel is an example of a ship's wheel used to steer a large sailing ship. Wheels such as this would usually be handcrafted by a shipwright.This large, heavy wooden ship's wheel is an example of a wheel used used in past centuries at the helm to steer large sailing ships. The design continues to be used on sailing vessels today. This whieel has been on display for decades to demonstrate the perspective of size of equipment on a sailing ship.Ship's wheel: wood and brass. Ten spokes. Brass hub and trim around circumference of wheel. Column-like spokes, with usual rounded handles around the outside of the wheel. Heavy wooden centrepiece with metal backing and shaft.flagstaff hill maritime museum and village, maritime museum, maritime village, great ocean road, shipwreck coast, ship's wheel, 10-spoked ship's wheel, wooden ship's wheel, navigation, ship's steering, ship's steering wheel, maring technology, ship's fitting, navigational equipment, sailing ship's wheel, handcraft, shipwright

Item in the collection relating to Edward Judd, refer Cat No 7410 for his service details.1.& 2. Chrome plated, moulded iron stirrup. It has the arch over the top and twin base 'rails' for under foot. On top of arch is a slot of 3.5 cm wide, this is for the belt. Leather belt and buckle for the stirrup. The belt is 2.5 cm wide and 5mm thick. The buckle is chrome plated iron.horse equipment, saddlery, stirrups

The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. J & M Ewan History: J&M Ewan was a Melbourne firm that began by selling retail furniture and wholesale ironmongery. They had substantial warehouses situated at the intersection of 81-83 Elizabeth and Little Collins Streets, the business was established by James M Ewan in 1852. Shortly afterwards he went into partnership with William Kerr Thomson and Samuel Renwick. When Ewan died in 1868 his partners carried on and expanded the business under his name J & M Ewan. The business was expanded to provide a retail shop, counting-house and private offices. Wholesale warehouses adjoined these premises at 4, 6 and 10 Little Collins Street, West. This company provided and sold a large and varied amount of imported goods into the colony that consisted of agriculture equipment, building materials, mining items as well as steam engines, tools of all types and marble fireplaces. They also supplied the Bronze measuring containers in the Flagstaff Hill collection and the probability is that these containers were obtained by the local Melbourne authority that monitored weights and measures in the mid to late 19th century. The company grew to employ over 150 people in Melbourne and opened offices at 27 Lombard St London as well as in New Zealand and Fiji. The company also serviced the Mauritius islands and the pacific area with their steamship the Suva and a brig the Shannon. Robert Bate History: Robert Brettell Bate (1782-1847) was born in Stourbridge, England, one of four sons of Overs Bate, a mercer (a dealer in textile fabrics, especially silks, velvet's, and other fine materials)and banker. Bate moved to London, and in 1813 was noticed for his scientific instrument making ability through the authority of the “Clockmakers Company”. Sometime in the year 1813 it was discovered that one Robert Brettell Bate, regarded as a foreigner in London had opened a premises in the Poultry selling area of London. He was a Mathematical Instrument maker selling sundials and other various instruments of the clock making. In 1824, Bate, in preparation for his work on standards and weights, leased larger premises at 20 and 21 Poultry, London, at a rental of four hundred pounds per annum. It was there that Bate produced quality metrological instruments, which afforded him the recognition as one of one of the finest and principal English metrological instrument-makers of the nineteenth century. English standards at this time were generally in a muddle, with local standards varying from shire to shire. On 17 June 1824, an Act of Parliament was passed making a universal range of weights, measures, and lengths for the United Kingdom, and Bate was given the job of crafting many of the metrological artifacts. He was under instruction from the renown physicist Henry Kater F.R.S. (1777-1835) to make standards and to have them deposited in the principal cities throughout the United Kingdom and colonies. Bate experimented with tin-copper alloys to find the best combination for these items and by October 1824, he had provided Kater with prototypes to test troy and avoirdupois pounds, and samples with which to divide the troy into grams. Bate also cast the standard for the bushel, and by February 1825, had provided all the standards required of him by the Exchequer, Guildhalls of Edinburgh, and Dublin. In 1824, he also made a troy pound standard weight for the United States, which was certified for its accuracy by Kater and deposited with the US Mint in 1827. Kater, in his address to the Royal Society of London, acknowledged Bate's outstanding experimentation and craftsmanship in producing standards of weights, measures, and lengths. An example of a dry Bronze measuring container made specifically for J & M Ewan by possibly the most important makers of measurement artefacts that gives us today a snapshot of how imperial weights and measures were used and how a standard of measurement for merchants was developed in the Australian colonies based on the Imperial British measurement system. The container has social significance as an item retailed by J & M Ewan and used in Victoria by the authorities who were given legal responsibility to ensure that wholesalers and retailers of dry goods sold in Victoria were correct. The container was a legal standard measure so was also used to test merchants containers to ensure that their distribution of dry goods to a customer was correct.Maker Possibly Robert Brettell Blake or De Grave, Short & Co Ltd both of LondonContainer brass round for measuring quantities- Has brass handles & is a 'Bushel' measurement. 'Imperial Standard Bushel Victoria' engraved around container. Container bronze round shape for measuring dry quantities has brass handles & is a 'Bushel' measurement"IMPERIAL STANDARD BUSHEL" engraved around the top of the container. VICTORIA engraved under "J & M Ewan & Co London and Melbourne" engraved around the bottom of the container.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, standard measure, bushel, bushel measurement, j & m ewan, dry measurement, victorian measurement standard, bronze container, melbourne observatory, robert brettell bate

Machete with cord loop through handleLEGITIMUS COLLINS & CO MADE IN U.S.A. No 1250 1943 (see Media for further detail)

WW2 Military Field Telephone contained in a leather case with shoulder strap.Embosed on the front of the case “ SIGNAL CORPS U.S. ARMY TELEPHONE EE-8-A

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of each box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a vagina has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of each box is printed with distributor information. One box is sealed, and one box is unsealed. Unsealed box contains one IUD, sealed inside a sterile plastic pocket. Back of sterile pocket is printed with an expiration date of 06-12-1984. The IUD is in the form of a small plastic rod, or stem, with two small flexible side-arms. Each side arm has five small protrusions. A copper wire is wound around the stem. A nylon thread with two ends is attached to the bottom end of the stem. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'.intrauterine device

The item was issued to Quentin Clifford BINKS, V245016 & VX114178 2nd AIF. Refer Cat No 1835 for his service history.Mosquito net. Very close mesh. Plain cotton in khaki green. Rectangular shape with loops at top corners for suspending.military - equipment, mosquito net

Green head set with earphones and hand held microphone with attachment to a long rubber coil connecting head set altogether. Leather strap holding earphones together. Metal connection for 12 Volt battery pack.radio sets

The photos are of EuropeStereoscopes were popular in mid 1850s. It is an instrument which enables a two dimensional image to appear three dimensionalViewer plus 3 boxes each containing 105 stereo photosphotography, viewers

Francis Robert LEONARD SX8804. Enlisted 13/07/1940. Discharged 17/01/1946. Rank Private, 2/166 Aust Workshops.Khaki webbing belt with evidence of green colouring. The belt has brass clasp fittings and brass sliding keepers. On the inside of the belt, the sewn in adjustment points are very worn and have been well used. There are two close additional brass webbing attachment points towards the centre of the belt."SX8804"passchendaele barracks trust, leonard, webbing belt, equipment, ww2

Item is a one man tent fly cover.Waterproof, nylon tarp with brass press clips and cotton tie downs."F398147 BIRD, CONLONS - AUSTRALIA 1970, ^ 8465/66/013/5032".passchendaele barracks trust, one man tent (hoochie)

This duffel bag was used during the Vietnam war by National Serviceman Private Wayne Edward Maschette, Army number: 5716538, who served in 8RAR, 1969-70, Long green canvas bag with a large white painted label. Brown stencilled printing of name and number of soldier. Brown, blue and yellow stripes and a picture of kangaroo on left hand side. Base of bag is covered in white paint with a black strip through the middle. Eight corroded metal rivets at the top of the bag where cord to close it would go.Front- 1023 5716538 PTE W.E. Maschette. Back- 8RAR E NOGGERA. His name and 5716538 all marked in texta. duffel bag, 8rar, army issue, bag, maschette, vietnam war, kit bag

WWII historic signficanceMilitary water bottle in khaki container with webbing shoulder strap. Blue enamel body with felt covering (for insulation). Held approximately 1 litre. Had a cork stopper. The name 'ELLISON' is written on the strap

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Box of accessories for the carbon monoxide monitor manufactured by Dragerwerk Lubeck Germany. Instructions enclosed are in English German and French Clear perspex container - divided into three sections. Thermometers, plastic bag, rubber tubes. Instruction sheet in German, English and Frenchviosh, victorian institute of occupational safety and health, carbon monoxide monitor, dragerwerk lubeck

Wooden 12 inch / 30cm school rulers with increments in inches and centimetres both sidesBank of ES & A / Commercial Savings Bank of Australia Limited / Drink a Pint of Milk a Day / Standard school Ruleeducation, school, measuring, ruler

Hot water heater consisting of a barrel, flue, fuel tank and an igniting unit.Choofer not for rubbish. 4540-SG-10G-033Gimmersion heater, choofer

While barber shops were the commercial premises where men and boys had their hair cut, the number of hair clippers in the Kew Historical Society's collection would indicate that frequently hair clipping was carried out in homes in the pre and post war period. Manual hair clippers were readily available for purchase. Electrical clippers were presumably used in barber shops.Metal handheld hair clipperspersonal grooming, barber's equipment, hairdressers, hair clippers

Entrenching tool - refer Reg No 3004. Item issued to Peter Ball 3796117, refer Cat No 4704Webbing pouch, green colour, shaped to fit a entrenching tool. Has press stud closing cover, rear is fitted with 2 x steel keepers for fitting to basic webbing.PETER BALL D [up arrow] Dmilitary, webbing, entrenching tool

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military and agricultural use.Nickel plated horse bit bradoon nickelequine, military, agricultural, civilian ca1910, horse bit