Showing 329 items matching tools-and-equipment
Container (1137) Equipment (1796) Functional object (3899) Instrument (389) Machine (329) Tool (1397) Vehicle (141) Weapon (440)-
Moorabbin Air Museum
Machine - Sander Veenstra Thermite, 1980
Historical Details: . Description: Sander Veenstra was a pioneer of the Australian ultra light flying movement in the early 1970’s. He began his flying in a Skycraft Scout, much like the example in the Museum collection he later fitted the Scout with two Victa motor mower engines. He bu. Level of Importance: National -
Australian Gliding Museum
Machine - Glider – Sailplane
Prior to World War II an international competition was held for design of a standard sailplane for use in Olympic competition in 1940 in Finland. The design chosen was the “Meise” from DFS in Germany and its designer Hans Jacob. The 1940 Olympics were cancelled due to the outbreak of war and post war international gliding competition has been organized as World Championships, not as an Olympic event. After the war the Meise was manufactured by firms in Europe and a few were built by amateurs from plans. In 1945, a United Kingdom firm, Chilton Aircraft Limited, revised the plans for the DFS Meise Olympia keeping its aerodynamic shape and prepared new technical drawings for the production of the Chilton Olympia. It engaged Elliotts of Newbury (a firm with aircraft production experience during the war) to built a set of wings for its prototype. The wings were made by Elliotts but it apparently refused to let Chiltons have the jigs required to build more wings. The matter was resolved by Chiltons transferring its production rights and equipment to Elliotts. Elliotts produced several batches of Olympias (the “EON Olympia”) – probably about 150 in total from 1947 including Marks 1, 2 and 3 versions (featuring some structural changes and design improvements). The Australian Gliding Museum’s Olympia is a Mark 2 (actually 2B according to the logbook) which can be distinguished by the built in main wheel and blown Perspex canopy. It was designated as serial number EON/O/34 by Elliotts. It was damaged badly at Bristol, UK, in 1949. The wreckage was acquired by a Melbourne based syndicate including Dave Darbyshire, and imported into Australia. Additional damage occurred in shipping due to the need to shorten the wings to fit them into a crate. The syndicate rebuilt the glider and re-launched it in 1956 (registration number VH-GHR). It was flown by the syndicate and several gliding clubs in Victoria and South Australia until about 1972. A potentially airworthy example of a now rare sailplane of historical importanceSingle seat wooden sailplane, partly restored.australian gliding, glider, sailplane, dfs, hans jacob, meise, olympics, eon olympia, chilton aircraft, elliotts of newbury, dave darbyshire, great eastern gliding club, barossa valley gliding club, murray bridge gliding club -
Moorabbin Air Museum
Machine - Bristol Hercules 672 - 1700 HP Air Cooled Twin Row 18 Cyl
Historical Details: . Description: Developed in Britain in 1938 the Bristol Hercules sleeve valve 18 cylinder twin row air cooled radial engine was one of the most powerful British aero engines of the day. It powered the Beaufighter and Bristol Freighter amongst other aircraft.. Level of Importance: s/n 167516 -
Moorabbin Air Museum
Machine - Bristol 170 Freighter VH-ADL (Ap-Adm, S4438), 1962
Historical Details: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. In 1966 th. Description: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. Designe. Level of Importance: Nationalfreighter, bristol -
Whitehorse Historical Society Inc.
Machine - Sewing Machine
Hand operated sewing machine set in wooden base. Wooden cover ornately decorated.Jones As supplied to Her Majesty Queen Alexandra Family C.S. English Made. S No. 94257domestic items, sewing, textile machinery -
Flagstaff Hill Maritime Museum and Village
Machine - Ship Rope Block, Russell & Co, Circa 1886
This double-sheaved wooden ship’s block or pulley is a mechanical device used for lifting and moving heavy objects. It has two grooved wheels joined together, each with an axle between the cheeks or sides of the grooved wheel. Blocks and tackle are included in a ship’s rigging. These pulleys and ropes are used for the mechanical advantage they provide for lifting, moving and re-arranging the setting of the sails, which are very heavy work. Blocks are also used to load and unload the ship’s cargo. The FALLS of HALLADALE- The sailing ship Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The ship had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions.This artefact is important as it is an example of the materials and design of late-19th century ship’s rigging equipment. The object is also significant for its association with the historic sailing ship Falls of Halladale, wrecked in local waters in the early 20th century. The clipper ship Falls of Halladale shipwreck is of historical significance and is listed on the Victorian Heritage Register, No. S255. She was one of the last ships to sail the Trade Routes. She was one of the first vessels to have fore and aft lifting bridges. The vessel is an example of the remains of an international cargo ship and also represents aspects of Victoria’s shipping industry.Rope block, wooden double-sheave mechanical device with a short length of chain attached and remnants of the metal frame. It was recovered from the Falls of Halladale.Noneflagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, falls of halladale, shipwreck, peterborough, 1908 shipwreck, peterborough shipwreck, russell & co., greenock, wright breakenridge & co. glasgow, clipper ship, block and rigging, ship’s block, iron ship, four-masted ship, sailing ship, windjammer, clyde, wright, breakenridge & co of glasgow, fore and aft lifting bridges, machine, mechanical advantage, block, wooden block, pulley, tackle, sheave, ship rigging, double-sheave, twin sheave, captain david wood thomson -
Moorabbin Air Museum
Machine - Fairey Gannet XG789
Historical Details: . Description: The Fairey Gannet was designed and built in England in 1949 as a dedicated anti submarine aircraft that could be operated from aircraft carriers. Its 3000 shp Double memba turbine engine, driving a contra rotating propeller gave it the advantage of a t. Level of Importance: State -
Moorabbin Air Museum
Machine - De Havilland DH114 Heron 2 VH-CLX (G-ANPV)
Historical Details: . Description: The Heron, derived from de Havilland’s earlier twin-engined Dove, first flew in 1950. It achieved considerable success in export markets as a feeder airliner and found several buyers as an executive transport on the US market with a total of 149 being built. Level of Importance: Regional -
Queenscliffe Maritime Museum
Machine - Outboard Motor
Twin cylinder horizontally opposed water cooled 2 stroke outboard motor including shipping crateBritish Motor Boat manufacturing Co. -
Falls Creek Historical Society
Machine - Cash register and ticket machine
This Cash Register was used for the sale and production of lift tickets, lessons and packages during the 1990s at Falls Creek. The employees who operated the machine were called 'Ticket Tarts'. This item is significant because it was a critical part of the everyday operation of the chair lifts at Falls Creek.A large square cash and ticket machine with buttons and slots for the production of lift tickets. Long cable connected to the back. snow, ski season, ski pass, ski lessons, ticketing, sales -
Moorabbin Air Museum
Machine - CAC CA-6 Wackett Trainer A3-22 (VH-ALV), 1941
Historical Details: The AARG Wackett Trainer A3-22 was the 22nd production example (and 24th one built) and was delivered to the RAAF in August 1941. It served briefly at 3EFTS at Essendon VIC as an Intermediate Trainer until being re-issued to the Central Flying School at C. Description: This wood and fabric monoplane was designed by Lawrence Wackett in 1938 as a basic trainer and was built by the Commonwealth Aircraft Corporation (CAC) at Fishermen’s Bend. RAAF pilots, trained on the Tiger Moth and aspiring to fly the more powerful Wirra. Level of Importance: National -
Moorabbin Air Museum
Machine - CAC CA-27 Avon Sabre A94-989
Historical Details: . Description: Early in 1951 the Australian Government announced that the North American F86 Sabre, would be manufactured in Australia by CAC as a replacement for the Gloster Meteor. The RAAF required major modifications to the basic design, mainly the installation o. Level of Importance: Regional -
Whitehorse Historical Society Inc.
Machine - Lace Making Pillow
American lace loom. Victorian substitute for the usual lac maker's cushion.Lace making loom on blue plush base. Round cylinder with wooden handle. Green base on cylinder with pins to form lace pattern. 32 wooden bobbins with cotton attached lead cotton to pattern.handcrafts, lacemaking -
Australian Gliding Museum
Machine - Glider - Sailplane
MOBA2 is a 15 metre sailplane designed by Gary Sunderland, who was an aeronautical engineer working for the Department of Civil Aviation (Australia) and a member of the Victorian Motorless Flight Group (VMFG). The design gave effect to ideas that he developed circa 1970 for an aircraft that he could build himself. He entered a 13 metre wingspan version of his MOBA design (MOBA2B) in an Australian Gliding sailplane design competition that was announced in 1970. The competition called for sailplane designs with a maximum wingspan of 13 metres that could be built by amateurs in a small workshop with limited tools and facilities. In 1973, Gary’s MOBA was judged by the competition panel as equal best with the other outstanding submission, which were chosen from a field of 19 entrants. However, after gathering further information and deliberation by the competition panel neither of the two outstanding designs were chosen as the winner. Notwithstanding the outcome, in 1974 Gary proceeded built his glider to the original 15 metre design. The wing was equipped with camber changing flaps that were permitted under special standard class rules for the 1974 world championships. Changes were made along the way in the light of construction experience and the completed glider was given the designation MOBA2C. The glider first flew on 12 December 1979. It was never flown in standard class competition as by the time the glider was built the special 1974 rules were revoked and wing flaps were no longer permitted in that class. However, Gary flew MOBA2C in the Australian national gliding competitions held at Benalla in the summer of 1979 / 1980 competing in the open class. After adjustment to the aileron gearing during initial trials MOBA2C was found to fly well and in competition produced performances believed to be better than contemporary standard class sailplanes but not as good as the open class machines. The glider was later modified in a number of respects including amongst other things the installation of spoilers located just forward of the wing flaps and by increasing the chord marginally at the wing root. With these changes the glider type was given the designation MOBA2D. The last recorded flights occurred in February 1996 at which time MOBA2 had flown an aggregate of 401 hours and 59 minutes during its 297 launches. Its operational life was brought to an end due to expansion of the foam in the wings causing distortion of the wing surface.The MOBA2 is a notable home built 1970s sailplane design that featured a number of innovative elements including composite construction without the need for expensive jigs, nose cone canopy and asymmetrical placement of control column.Composite single seat glider / sailplane finished in bright yellowRegistration "GVI" on fuselage; Kangaroo, Australian Flag and VMFG decals on vertical stabiliseraustralian gliding, glider, sailplane, moba2b, moba2c, sunderland, moba2d, victorian motorless flight group, vmfg -
Moorabbin Air Museum
Machine - Edgely EA-7 OptiCA (Cockpit)
Historical Details: . Description: The Edgely Optica is a UK design developed by John Edgely in the late 1970s using a flat 6 engine in pusher configuration in the form of a ducted fan, and featuring a fully glazed cabin said to be 'reminiscent of an Alouette helicopter'. The design was. Level of Importance: Regional -
Moorabbin Air Museum
Machine - Microturbo Cougar 022 Turbojet
Historical Details: . Description: The Microturbo Cougar 022 Jet was used in Turana target drones which were in turn developed from the Ikara missile. The Turana was designed to use the same lunch system as the Ikara and built to survive 10 flights. The engine was designed for 20 missions. Level of Importance: State -
Moorabbin Air Museum
Machine - Rolls Royce Kestrel 700 Hp Liquid Cooled V 12
Historical Details: . Description: The Rolls Royce Kestrel was the company’s first cast block engine. The Kestrel was introduced in 1927 and powered many interwar British military types such as the Hawker Fury and Hawker Demon. They were extensively exported and a number even powered G. Level of Importance: State -
Tatura Irrigation & Wartime Camps Museum
Machine - Model - Evaporator
Model of the evaporator was made especially as a farewell gift for Norm and Loretta Hooper upon their retirement from Rosella Food Factory c 1990. The model was made in the workshop and presented to Norm and Loretta Hooper upon retirement. Model of "Rossi Cattelli" evaporator used at Rosella Factory from approx 1983. Built in Italy the working machine was assembled on the south side of the factory by Joe Guiareschi. Later sold to SPC Ardmona. Replica model of the Rossi Catelli evaporator. Made from stainless steel.Norm and Loretta. Best wished on your retirement from employees and staff at Rosella.rosella food factory, norm hooper, loretta hooper, rossi cattelli evaporator -
Mont De Lancey
Machine - Sewing Machine, Free Sewing Machine Co, Circa 1902
'Free' Treadle Sewing Machine'Free' barnd treadle sewing machine mounted in a wooden cabinet with two small drawers on each side at the front. It has ornate gold floral design decals on the machine. The treadle is surrounded by a wooden base.'The Free' 'Free Sewing Machine Co. Rockford Ill. USA' 'Designers Patented and Manufacturers Australian Registration Numbers RD 2163 RD ? New Zealand Numbers 862-863. General Offices and Factory 608-644 Harris Street Sydney'.sewing machines, machines, sewing equipment, cabinet sewing machines, cabinets -
Queenscliffe Maritime Museum
Machine - Outboard Motor, 1960s
West Bend 18 HP 2 Cylinder 2 stroke water cooled outboard motorModel 18101 Serial No. 1705 -
Queenscliffe Maritime Museum
Machine - Outboard motors
5 Seagull outboard motors, 4 model 102, 3.1/2 HP; No 2 has clutch, No3 is a long shaft, No 5 is a Century model 3.1/2 HP alloy cylinder head5 Seagull outboard Motorsoutboard motors, seagull -
Whitehorse Historical Society Inc.
Machine - Washing Machine
Hand operated washing machine - plunger type - a central cone plunger attached to a fulcrum point (adjustable in height) on side with a long arm. Depth of plunger action also adjustable. All mounted on a three leg frame. Container is slightly coned shaped at bottom and has a drain tap at bottom for emptying water. Container can also be lifted off. Provision made for attachment of a wringer (this could be a later modification). Plunger is approx 37cm in diameter and has four 1.5cm holes for water to be forced through. Unit is galvanised steel but frame appears to have been painted with 'Silverfros'.On Side of container - 'The Zwar' VACUUM Washing Machine Patent No 2089/31domestic items, laundering -
Queenscliffe Maritime Museum
Machine - Outboard Motor, 1950 -1960
Cameron and Sutherland was a Machinery supplier of this era and probably distributed locally made outboardsSingle cylinder air cooled 2 stroke Villiers motor 31/2 HP291X15450 Cameron and Sutherland Salesoutboard motors, villiers motor, 2 stroke, single cylinder -
Churchill Island Heritage Farm
Machine - Scoop
This type of scoop had many names. It was also known as a horse drawn steel drag pan, dirt scraper, scoop, tumble bug plough, or Buck scraper. A horse was hitched to the front, and the farmer would walk behind, lifting the handles so that the scoop lip dug in and the soil and rocks collect in the scoop. When full, the farmer let go of the handles and the lip would rise out of the ground. The horse would then pull the scoop to where the dirt would be emptied. Once at the dumpsite, the farmer pulled on the handle just enough for the lip to catch on the surface and as the horse continues forward, this would cause the scoop to flip over and dump the contents.Rusted metal scoop, with a bucket hinged onto a metal arm.scoop, churchill island, farm machinery, horse drawn -
Hume City Civic Collection
Machine - Dictaphone
This dicta phone was used by the Shire of Bulla Engineering Department for the recording of letters or other information that would then be typed up by an office person.This is a cream coloured electric dicta phone in a small brown case with plastic handle and two locks. It also has a hand held microphone, a grey metal foot pedal, an electrical cord and ear phones included in the case. This item is quite heavy.Stenoretteshire of bulla, office equipment -
Moorabbin Air Museum
Machine - GAF Jindivik Mk 3A A94-492
Historical Details: . Description: The Jindivik target drone was developed in the late 1940s by the Government Aircraft Factory as an expendable target aircraft for live guided missile trials. By 1986 some 502 examples had been built and the Jindivik remains the only Australian-designed. Level of Importance: State -
Moorabbin Air Museum
Machine - CAC CA-12 Boomerang A46-25 (Fuselage)
Historical Details: . Description: The Boomerang was Australia’s so-called ‘Panic Fighter’ of the Second World War. It was designed and built by the Commonwealth Aircraft Corporation (CAC) in response to Australia’s desperate need for combat aircraft following Japan’s sudden entry into. Level of Importance: State -
Moorabbin Air Museum
Machine - Armstrong Siddeley Viper 2,700 Lbs Of Thrust Turbo Jet
Historical Details: . Description: The Viper was developed in England from the earlier Armstrong Siddeley Adder engine. It introduced the concept of 'Power by the Hour' where operators paid Armstrong Siddeley a fixed rate per flying hour for maintenance. The Viper powered many aircraft inc. Level of Importance: State -
Australian Gliding Museum
Machine - Glider – Sailplane, Circa 1971
The Vogt LO150 is a sailplane first produced in 1954. Designed in Germany by Alfred Vogt, the LO150 is of wood construction. It has a two piece wing of 15 metre (49 feet) span and a fuselage of monocoque design. The first of the type to be imported into Australia arrived in late 1955. In January 1956 this aircraft type was used to create a world speed record of just under 75 km/h for speed around a 300 km triangle and went on to win the Australian National Gliding Championships. The Museum’s LO150 (VH-GUC) – serial number EB71 was imported from Germany in 1971 by the late Frank Erdmann and an ownership syndicate formed. Following Erdmann it has had a number of owners. Much of its usage was at Bacchus Marsh and Horsham with excusions elsewhere for competition. This Vogt LO150 was last flown on 3 January 1988. Overall, since arriving in Australia, it has flown 315 hours from 273 launches, which is a commendable average performance of over an hour per flight. VH-GUC was donated to the Museum by Warren Mayfield in 2002. Substantial glue deterioration was discovered in one wing and, as a result, a decision has been made not to restore the glider to an airworthy condition. In due course the glider will be repainted and further prepared for display. This exhibit is an example of the Vogt LO150 semi-aerobatic competition sailplane.Single seat competition sailplane of wood construction.Builder's serial number EB71australian gliding, glider, sailplane, vogt, lo-150, erdmann, mayfield, geelong gliding club -
Australian Gliding Museum
Machine - Glider – Sailplane, 1967
The Slingsby T53 glider was designed by J. Sellars in the 1960s as an easily maintained two seat trainer suitable for RAF Air Training Corp use and for sale in the USA and Australian markets where wooden gliders were becoming less popular. The Slingsby T53 prototype first flew in 1967. The T53B version has a conventional fixed tailplane with elevator instead of the all-moving tailplane of the original type. The “B” version also has ailerons of narrower chord and lacks wing flaps. Further changes were made to the fin (extended above the tailplane) for the final “C” version. Production of the T53 at Slingsby was disrupted by a fire at the factory in 1968. As a consequence the contract to supply 40 of the type to the RAF was cancelled and only a relatively small number (possibly 27) were made by Slingsby before the project was discontinued. The rights were later sold to Yorkshire Sailplanes. It designated the glider as the YS53 Sovereign – only a few were produced (possibly 3). The Australian Gliding Museum’s example is a type “B” model. It bears serial number 1686 and was manufactured in 1967. It was registered in Australia as VH-GUB in name of Boonah Gliding Club, Boonah, which is about 90 kilometres south west of Brisbane in Queensland. Locally it was called “the Bomber”! This exhibit is a representative example of the Slingsby T53 sailplane type. It is a rarity in Australia.All metal twin seat glider / sailplane, painted white with red tips and markings.“Slingsby T53B” on each side of fuselage below cockpit opening; Registration VH-GUB on each side of fuselage at rear.australian gliding, glider, sailplane, slingsby, t53, sellars, boonah gliding club, slocombe, boyle