Brass & steel steam engine. Fuelled by Methylated Spirits into a tray under the boiler. All mounted onto a Meccano Base with red plastic funnel for use with methylated spirit. The donkey engine is a toy.toys, mechanical

Steering Gear Operation: All steering was done from the stern of the ship and a steering mechanism was used to connect the rudder to the ship's wheel, often housed in a box-like construction behind the helm. The rudder was, in turn, mounted on a pintle or stern-post held in place by gudgeon's (sockets). The steering was activated with lines attached to the blocks on the two threads (half left hand, half right hand) of the steering gear. As the helmsman turned the helm in the direction in which he wished the ship to travel, the central screw of the steering gear, which was attached to the back of the helm, turned horizontally. This caused the rods on either side of the gear to move backwards or forwards at the same time, which then turned the pintle and rudder to port or starboard. A brief history of the Newfield (1889-1892): - The Newfield was an iron and steel sailing barque of 1306 tons, built in 1889 by Alexander Stephen & Sons Dundee (Yard No 89) for Brownelles & Co., Liverpool. The Newfield was on a voyage from Sharpness to Brisbane on 29 August 1892, with a cargo of 1850 tons of fine rock salt. The Cape Otway light had been sighted in squally, bumpy weather, but the captain was under the impression it was the King Island light. The ship’s chronometers were wrong, and orders were given to tack the ship away from the light, which headed it straight for the cliffs of the Victorian coast. The vessel struck rocks about 100 yards from shore, and five feet of water immediately filled the holds. The captain gave orders to lower the boats which caused a disorganised scramble for safety among the crew. The panic resulted in the deaths of nine men, including the captain when they drowned after the boats capsized in heavy seas. The seventeen men who regained the ship decided to wait until daylight and rowed to Peterborough in the ship’s jolly boat and gig after locals had failed to secure a rocket apparatus line to the ship. The Marine Board inquiry found the wreck was caused by a "one-man style of navigation" and that the captain had not heeded the advice of his crew.The Newfield wreck and its collection of recovered items are heritage listed and are regarded as historically significant. They represent aspects of Victoria’s shipping history and their potential for us today to interpret the maritime history and social themes of the time. The assemblage of various Newfield artefacts held in the Flagstaff Hill Museum is not only significant for its association with the shipwreck but helps archaeologists when examining the relationship between the objects to better understand our colonial marine past.Ship’s steering gear, cast iron, consists of a long round metal rod into which gears have been machined. The thread of the gear from one end to almost the centre winds in a left hand direction while the thread of the gear from the other end to almost the centre winds in the right hand direction. Each end of the rod has a metal coupler attached and two narrower round rods are also attached to the coupling, one each side of the gear rod, the same length as it and parallel to it. Two more ‘S’ shaped couplers are joined to the gear rod. Each of these have an opening through which the gear rod is threaded and can move along. There is another opening in these couplers through which one of the narrower rods is threaded. The other end of this coupler has half length metal rod attached to it by a bolt through the ring at the end of the rod. One end of the steering gear still has the brass hub of the ship’s wheel solidly attached. The hub no longer has its wooden spokes but the ten holes for the spokes can be easily recognised.Noneflagstaff hill, maritime museum, shipwreck coast, warrnambool, peter carmody, carmody, newfield, shipwreck, peterborough, south west victoria, rocket, rocket crew, shipwreck artefact, flagstaff hil maritime museum, steering, steering gear, screw steering gear, sailing ship

Knitted fabric is made with a single yarn or sets of yarns moving in only one direction. Whether done by hand or by machine, the process is the same. The knitting needle loops the yarn through itself to make a chain of stitches. These chains, or rows, are connected to produce the knitted cloth. There are two types of commercial knitting machine. A flat-bed has its needles, one for each loop, arranged in a straight line to produce a flat fabric. A circular machine has its needles arranged on a rotating circle. The cloth forms as a tube which can be made into seamless clothing. Dellruss Pty Ltd original owner Llyold Henry Coburg. Mock ribber fitted post World War 2. In use from c.1928 until 1978.Stibbe Maxim circular sock knitting machine.sock knitting machine, manufacturing, textiles, socks, machines, circular, clothing, industry, wool

Historical Details: . Description: The Westland Wessex was developed in Britain as a turbine engined version of the American Sikorsky S-58 with over 356 built between 1958 to 1970. The Wessex was used by the R.A.F. and Royal Navy and countries around the world including Australia. Th. Level of Importance: Regionalwessex

A 'Brunsviga' adding Machine used to educate people who were blind or vision impaired in arithmetic during in the early 1900s. The firm Grimme, Natalis & Co (GNC) was established in 1871 to build sewing machines and domestic appliances at Braunschweig (Brunswick) in Germany. In 1892 engineer Franz Trinks was instrumental in securing the manufacturing rights to the Odhner calculator patents. The first machines were built according to W.T. Odhner's 1890 design, and were distributed under the brand name "Brunsviga". Trinks continued to develop and refine the Brunsviga calculator over a period of almost 30 years. The brass rotor disks are 71mm in diameter, with the nine setting levers spaced on 9mm centres. The moving carriage has 10 places in the counter register and 18 in the accumulator, but the tens-carry mechanism only covers 10 of the 18 places. The carriage is positioned manually by releasing a latch and moving the assembly by hand to the required position. The registers are cleared by a full turn of the large wing nuts on either end. The mechanism is very basic, with no safety interlocks and no added features.Metal machine on wooden base.Brunsviga Patent Braunschweigoffice equipment and supplies, royal victorian institute for the blind

This antenna was used between 1989 and 1990 to help receive the daily news service in the Greek language directly from Athens, Greece. At the time, news from Greece for the Greek people in Australia were arriving in Melbourne a week late, on newspapers from Athens sent through air-mail. These newspapers were displayed at Salapatas and Carras newsagents at Lonsdale street in Melbourne. One thing that was a problem for this service was that the news came at least 7 days late. Using the Shortwave Antenna we could get the latest news from Athens on shortwave radio directly and within an hour these news were recorded on a cassette tape and taken to the Tricom Group P.L. offices in Melbourne (1155 Malvern Road, Malvern 3144). The tape was loaded onto a system which allowed people to call a local phone number and listen to the latest news with a cost of a local call, or a little bit more. As this was prior to the Internet being established around the globe, it was the fastest news service directly from Greece, in the Greek language. It was used for a span of about 12 months, until Tricom closed down their dial-in services, sometime in 1990. The service was captured and loaded onto the system by Iakovos Garivaldis, then an employee of the Tricom Group which was a subsidiary of Southern Cross TV.The Primary significance of this object is of its historical value, social and informative value for the first generation of Greeks in Victoria"World Tuner AT4 SW" antenna with a 920mm fully extended aerial, a tuned circuit and two transistors to prevent loading of the antenna and boost signal output. It is made of plastic, black in colour with the aerial being made of steel. The signals picked up by the antenna are fed via a 15pF ceramic capacitor to a tuned circuit consisting of either VC1a or VC1b and either L1, L2, L3 or L4. The slider switch S1 selects the band to be tuned. The band range is normally from 3 to 30MHz. When S1 is in position A, L1 and VC1a are selected and the antenna can be tuned from 3-9MHz. Similarly positions B, C, and D select higher frequencies up to 30MHz. It was purchased by Iakovos Garivaldis for this use for $119.WORLD TUNER AT4 SW "Amplituned" Shortwave Antennaantenna, radio, short-wave, language, greek

This Cash Register was used for the sale and production of lift tickets, lessons and packages during the 1990s at Falls Creek. The employees who operated the machine were called 'Ticket Tarts'. This item is significant because it was a critical part of the everyday operation of the chair lifts at Falls Creek.A large square cash and ticket machine with buttons and slots for the production of lift tickets. Long cable connected to the back. snow, ski season, ski pass, ski lessons, ticketing, sales

Recognising that warmed ether was less irritating to the airway and patients receiving it were less likely to experience shock, Francis Shipway developed the Shipway's apparatus which was used during World War 1 and continued to be used through to World War 2. Reduction of shock for patients who had experienced trauma was crucial to their later recovery, particularly during war times. This example of the Shipway's apparatus also has the facility for administering chloroform.A triangular metal stand with two glass jars sitting in a metal tub and a green metal jar that looks like a thermos, also sitting in a metal tub. A metal pole has been screwed into the centre point of the stand, with a circular top to act as a handle. One of the jars has a rubber stopper in the neck with metal tubing attached to the stopper. The other glass jar has a metal screw top with a dropper spout. The two glass jars are connected via red rubber tubing. The apparatus has been sectioned in parts to show the inner mechanisms.Typed in black ink on white paper and adhered to metal bath: SHIPWAY'S APPARATUS •Typed in black ink on white paper and adhered to metal bath: ETHER VAPORISER •Typed in black ink on white paper and adhered to metal bath: THERMOS WITH HOT WATER •Typed in black ink on white paper and adhered to glass bottle: CHLOROFORM VAPORIZER •Typed in black ink on white paper and adhered to metal connector: TO AIR BELLOWS •Typed in black ink on white paper and adhered to tube in thermos: DELIVERY TUBE •Moulded into base of thermos: THERMOSshipway, world war i, warmed ether, endotracheal, chloroform

Small hand operated sewing machine on four metal legs ornately decorated with gold leaf pattern.domestic items, sewing

Purchased in Lancashire, England. Arrived in Australia in 1951.Mrs. Popkop[ lived in Box Hill for 27 years , then for 18 years in Scott Street Mitcham before moving to Tweeds Heads in 1998. Mrs Popkop thought she may have had to live in the outback where there would not be any power, hence the hand operated machine.|When we were given the machine it was in very poor condition. Ted Arrowsmith worked on it diligently and finally got it in working condition.|Then we had to get the bobbin to work. As we were not familiar with this type of bobbin, it being the torpedo type, Frances Warren took it to the Ringwood Sewing Centre, 17 Melbourne Street Ringwood and Barry Ford was able to show her how to thread the bobbin..|After a lot of trial and error 2with the tension we finally got the machine to sew a seam. Barry Ford checked the serial no. and authenticated the date of manufacture as 1889.Hand operated vibrating shuttle Singer sewing machine, burgundy with wooden base. Serial no. 8615740Singertextile machinery, sewing, domestic items

Historical Details: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. In 1966 th. Description: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. Designe. Level of Importance: Nationalfreighter, bristol

dairy farming, r.a. lister and co. ltd, cream, separator

Used to collect the combed top from a noble comb. Consists of a cast iron stand and base with steel pinch rollers and a rotating iron feed tube to empty the top into a receiving bin.combing, windchest, machine, wool processing, industry, wool, rollers, bin

The Bocian is a versatile training sailplane that first flew in 1952. The type has been modified in several respects over the course of production by SZD (tailplane and rudder in particular). About 600 have been built; many for export to 27 countries (including Australia). The aerobatic capability and fine performance (best glide ratio of 26) has enabled the Bocian to be used to train competition pilots as well as those of lesser experience. Many world gliding records were set in the 1950s and 1960s in Bocian gliders. The Museum’s example is a type D test flown in Poland on 3 and 4 April 1963. It was imported into Australia in September 1963 by Austerserve Pty Ltd. The first owner was the Alice Springs Gliding Club and the glider had name “Cumulus” painted on the side of the fuselage (since removed). The glider had recorded 726 hours 46 minutes flying time from 2138 launches as at July 1967 when it was transferred to the Darwin Gliding Club. It appears that the glider was damaged in June 1968. The substantial repairs to the fuselage, both wings and tailplane and other minor repairs were completed on 13 October 1968. The glider continued flying with the Darwin Gliding Club until August 1969 at which time the service to that club amounted to 59 hours 7 minutes flying time from 348 flights. Between August 1969 and August 1976 no flights are recorded in the logbook. It is understood that on its last flight at Bachelor, south of Darwin in the Northern Territory (August 1969) it was severely damaged when it crashed after spinning while being auto-tow launched (although this is not expressly mentioned in the logbook). Reg Hancock purchased the damaged glider and rebuilt the port wing and restored it to airworthy condition (September 1976). It was then transferred to Colac, Victoria, and used by the Colac Gliding Group at the Yeo airfield until February 1981, adding another 153 hours from 403 flights to the glider’s record. After airworthy inspection in September 1982 the glider was used by the Geelong Gliding Club until 1983 (logbook details not held). The 20 year survey was then due and the glider fell out of service. In the course of the most recent restoration attempt it was discovered that the glue used in construction had deteriorated and that it was no longer feasible to bring it back to an airworthy condition. Subject to restoration, this exhibit may be representative of the 1950s - 1960s Bocian two seat sailplane typeThis exhibit is a large two seat glider /sailplane of wood and fabric construction. All components are present with the exception of instruments. However, at the time that the aircraft was transferred to the Museum it had been taken apart for major restoration work. As received it is stripped of the top coats of paint and a number of components (including, amongst others, tip fairings, nose cone and cockpit elements) that were removed for facilitating the repair process. The glider, serial number 803, was registered as VH-GNLaustralian gliding, glider, sailplane, bocian, cumulus, alice springs gliding club, darwin gliding club, colac gliding group, geelong gliding club, hancock

This gas anaesthesia machine comprises a four yolk manifold, two circular metal components for nitrous oxide and two for oxygen. It is mounted atop a four pointed stand on casters for portability. In addition to reducing valves and regulators, the main stand also supports a cream-coloured, cylindrical Austox fractional rebreather and an ether vaporiser with variable bypass control within a circular glass container. portable, anaesthesia, midwifery, dentistry, obstetrics, oxygen, nitrous oxide, commonwealth industrial gases ltd, cig, austox fractional rebreather, ether vaporiser, variable bypass control, 1950

Used on a straight sewing machine, treadle type, years 1720 - 1050. Used by Mrs. Kate Warren who lived in Mitcham Road Vermont between 1936 - 1965.A tin holding an assortment of attachments used with a Singer Treadle Sewing Machine. 26 pieces.Attachments (on lid of Box)handcrafts, equipment

This Grunau Baby 2B glider, often referred to as the “Blue Grunau”, was built by Australian Sailplanes in 1946 and acquired by a syndicate consisting of Norm Hyde, Rob Dowling, Leo Dowling, Dick Duckworth and Ted Desmond of the Gliding Club of Victoria. Piloted by syndicate members and other GCV members the glider performed well in soaring and cross country flights at the various sites used by the GCV in 1947, 1948 and 1949. The glider went to Sydney for a while and then returned to be operated by another syndicate at the GCV. Pat Burke and Bob McAliece bought the glider in the 1950s and then sold it to Keith, Jack and Bruce Hearn of Melbourne. In 1957 the Blue Grunau moved to Western Australia and was added to the Glider Register as VH-GLC. Thereafter the glider had a series of owners. The glider has come to the Australian Gliding Museum via the RAAFA (WA) Division. The flying record of the Blue Grunau has been logged for the period of 28 December 1957 to 17 September 1975: Time in air – 559 hours 37 minutes from 1513 flights. Single seat glider /sailplane of wooden construction with plywood and fabric covering.australian gliding, glider, sailplane, grunau, blue grunau, australian sailplanes, hyde, dowling, duckworth, desmond, burke, hearn, gliding club of victoria, gliding club of western australia, narrogin gliding club

Fully aluminium steel cylinder liners x12. Silver with red writing Rolls Royce RR. It is an engine out of a Spit Fire aeroplane.Rolls-Royce RRrolls-royce, v12, meteor engine, merlin, spit fire engine

Used in the Burnley School of Horticulture - for arboriculture and maintenance of the Burnley Campus gardens.Two stroke petrol chainsaw, blue and black in colour. Smaller size machine.Solo Kleinmotoren GmbH. Type 60130. Made in Western Germany, Stuttgart. BAE.burnley college of horticulture, horticulture, arboriculture, tree maintenance, sawing timber

The Ka 8 was designed by Rudolf Kaiser in 1957 and built by Alexander Schleicher. It has been described as the single seat version of the Ka 7 Rhonadler. The Ka 8 proved popular with clubs in its role as a sailplane for early solo flying. Over 1100 were produced. The Museum’s example is a Ka 8B which is the second variant of the design, distinguishable by a larger blown Plexiglas canopy and improved ailerons. The particular glider was built by the RAAF Williamtown Gliding Club from kit supplied by Edmund Schneider Ltd of South Australia as agent for Alexander Schleicher. It was test flown on 8 July 1967. For a period from August 1994 it was owned by a syndicate at the Bendigo Gliding Club. The last entry in the log book is dated January 1995 at which time the glider had accumulated 1148 hours from 2303 flights. From 1967 to 1994, the glider was flown at numerous places including Williamtown, Bellata, Warkworth, Dubbo, Waikerie, Quirindi, Tamworth, Redding, Narromine, Leeton and Keepit. During 1994 and 1995 it was flown a small number of times at Bendigo. A notable flight recorded in the logbook is dated 31 October 1971 when W. Kenny reached 11,000 feet in height during a flight of 5 hours 10 minutes. The last owner prior to the transfer of the glider to the Australian Gliding Museum in 2015 was John Ashford of the Geelong Gliding Club. The glider carries Serial Number 8478-SH and appears to have been registered firstly as VH-GPA and secondly as VH-GMA. The last registration (VH-GMA) was cancelled in 2011.This Kaiser Ka8B sailplane, when fully restored, will be an airworthy example of a popular 1960s German club sailplane type. It is a rarity in Australia as only 4 of the type have been registered and flown here.Single seat sailplane made with a steel tube framed fuselage and wooden wings. A glass plastic moulding has been used to form the top of the fuselage forward of the cockpit. The structure is fabric covered.The glider serial number 8478-SH and the registration VH-GMA.australian gliding, glider, sailplane, schleicher, kaiser, ka 8, schneider, raaf williamtown gliding club, bendigo gliding club, geelong gliding club, ashford

This Boyle’s machine was made by the British Oxygen Company (BOC) in the 1950’s. The original Boyle's machine was invented by the British anaesthetist, Henry Boyle in 1917. His machine was a modification of the American Gwathmey apparatus of 1912, and became the best known early continuous flow anaesthetic machine. The Boyle’s machine was first made by Coxeter and Sons, under the direction of Lord George Wellesly, which was later acquired by the British Oxygen Company (BOC). Though a lot of changes have been made to the original design of the Boyle’s machine, the basic structure remains the same today.Green trolley on casters with flowmeter and vaporiser bottles attached to a stainless steel cross bar. There is a glass shelf at top of the trolley and a second glass shelf at base of trolley, above a pull out drawer. The pull out drawer contains 4 x black rubber masks, 3 x black rubber tubing connectors, 4 x seals, 1 a black corrugated rubber hose with red rebreather bag, red tube and masonite support board.Tin plate attached to upper portion of trolley: THE / BOYLE / apparatus / BY THE BRITISH OXYGEN CO. LTD.henry boyle, anaesthetic machine, gas, oxygen, flowmeter, nitrous oxide, british oxygen company, boc, coxeter and sons