Showing 5485 items
matching iron
-
Clunes Museum
Functional object - IRON BOILER, A. Kenrick & Sons
MADE IN WEST BROMWICH, ENGLANDCAST IRON BOILER WITH HANDLEA. KENRICK & SONS, WEST BROMICH. 8 GALL.local history, cooking, domestic items (kitchen) -
Clunes Museum
Tool - IRON HAND DRILL
IRON HAND DRILL OR SCREWlocal history, tools, drill -
Rutherglen Historical Society
Functional object - Weight, 1900
Solid iron weight for a scalesImperial Standard 8 ozweight for a scales -
Numurkah & District Historical Society
Equipment - Rechabite Seal
This Common Seal is the only one of its type with 'Numurkah Tent'.Cast iron lever pressNumurkah Tent / No 255.V.D. No. 82 S.U / I.O.R / Numurkah rechabite, common seal, numurkah, temperance -
Ballarat RSL Sub-Branch Inc.
Cannon Ball (Muzzle Loading Cannon)
Cast Iron 90m roundweapons, ballarat rsl, ballarat -
Arapiles Historical Society
Fire Branding Iron
Farm equipment 'H' ironbranding iron -
Kew Historical Society Inc
Equipment - Electric Iron, Rock, Rock Nr.265 6 Ilbs, 500 W / 280V, 20th Century
Electric Iron by Rock of Germany. Label: "Rock. Made in Germany. Nr.265. 6lbs. 280V."iron (electric), household equipment -
Hand Tool Preservation Association of Australia Inc
Grease container
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.grease container, iron lid -
Hand Tool Preservation Association of Australia Inc
Plane
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.plane, cornice, twin iron -
Hand Tool Preservation Association of Australia Inc
Level
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.level, 24" cast iron -
Hand Tool Preservation Association of Australia Inc
Brace bit
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.brace bit, cast iron -
Hand Tool Preservation Association of Australia Inc
Soldering iron
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.soldering iron, adj tip -
Hand Tool Preservation Association of Australia Inc
Soldering iron
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.soldering iron, adj tip -
Hand Tool Preservation Association of Australia Inc
Glue pot
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.glue pot, cast iron -
Hand Tool Preservation Association of Australia Inc
Stove
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.stove, soldering iron, fuel -
Hand Tool Preservation Association of Australia Inc
Level
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.level, box, cast iron -
Clunes Museum
domestic object - KETTLE
IRON KETTLE WITH COPPER LIDOn base; England First Qualitykettle, domestic item -
Geelong Gallery
Decorative object - Bottle, COELHO, Kirsten, 2017
Porcelain with banded iron oxide -
Stawell Historical Society Inc
Memorabilia - Realia, Quantity of Weights used for trade. Shire of Stawell Weights & Measures, 1870's
Assorted Cast Iron Weightsstawell, standards -
Stawell Historical Society Inc
Memorabilia - Realia
Metal Iron Bucket (Mining)stawell -
Stawell Historical Society Inc
Memorabilia - Realia, 1920's-1930's
Domestic Iron with metal bulbstawell -
Stawell Historical Society Inc
Memorabilia - Realia, 1950's
Electric Iron with Bakelite Handlestawell -
Mont De Lancey
Brace and Bit, Late 1700's or Early 1800's
Wrought iron Carpenter's Brace."12"woodworking braces, carpentry tools -
Mont De Lancey
Tool Holder
Iron File and tool holder. -
Working Heritage Crown Land Collection
Plaque - former Royal Mint Plaque, The Royal Mint
The object is a cast iron plaque.The Melbourne branch of the Royal Mint was established in 1965 after negotiations between Victoria and the British Exchequer. The original site contained 9,763 square meters and included a large area at the rear of the building. On this area, November 16th, 1869, the erection commenced of a single storey building forming three sides of a courtyard and containing workshops, laboratories and coining hall. The Guard Houses and this existing building, which completed the courtyard and housed administrative offices, deputy master's quarters and bullion room followed. All these buildings were designed by J. J. Clark, architect with the Public Works Department. The official opening took place on June 6th, 1872, when the first gold sovereigns were minted. IN 1970 the Public Works Department commenced the restoration and adaptation of this building and the Guard Houses for their present purposes. historic building, former royal mint -
Kiewa Valley Historical Society
Iron Hand Kerosene, mid to late 1900s
The 1950's saw a revolution in small appliances for use in the average household. This hand held self heating(kerosene) iron was introduced as a time saving and more convenient iron for pressing clothes and other cloth fabrics. It replaced irons needing a separate fire source to heat the ironing plate. These irons continued to be in service, even when electricity was available in cities and larger rural towns (domestic electric steam irons were invented in 1938). This item was used before and during the electricity supplies available from the Kiewa Hydro Electricity Scheme. These irons remained in use within regional rural areas that had limited or unreliable electrical reticulation.In the 1950s and later the Kiewa Valley was still a relatively isolated region which was home to rural properties and small settlements. The availability of electricity and or the financial means to afford new types of electric hand irons ensured that older and sometimes less efficient ironing remained for an extended period covering the 1960s to 1970s. Kerosene products, such as this kerosene iron was a cheaper method for farm based domestic and other rural activities requiring a heat source. The use of kerosene as a heat/light source was able to be supplied in bulk and able to be used when floods severed vital roads into this region. The supply of electricity was in summer time subject to interruption from bush fire damaged wooden poles carrying the electrical cables. Self sufficiency by rural populations was the backbone of survival and the ability to store energy sources "on the farm" was a prerequisite of isolated regions, such as the Kiewa Valley, circa 1950s.This Coleman kerosene iron has a solid steel chrome plated(press) base with a painted (blue) wooden handle. The handle is stud fastened onto an oblong shaped rolled steel handle frame and screwed (two screws) onto the base plate. Both the heating plate and the top securing plate are shaped similar to a river boat. The main housing enclosing the heating element is enamel coated(blue in colour) steel and has a half hole for lighting the kerosene at the rear end. Behind the handle and protruding upwards is a stainless steel fully enclosed container (bowl shaped) for the main supply of kerosene to the burner or generator(enclosed within the main body of the iron. The bowl has an air valve and inlet for pressurised air intake (hand pump) On the bottom rear of the fuel bowl there is a screw regulated fuel pump. The fuel heated base plate provides the heat for this advertised "self heating iron(instant lighting). See KVHS 0347B- Instruction sheet; KVHS 0347C- Wrench; and KVHS 0347D Fuel can.Stamped on the base plate of the handle, front region "COLEMAN LAMP & STOVE CO." below this "WICHITA KAN" below this"TORONTO CAN". In the middle of the handle base and in larger print "COLEMAN Instant-Lite" At the rear location in large print "MODEL 4" in smaller print below "MADE IN U.S.A." below this "PAT#1718473"household appliances, alternative non electrical ironing appliances, domestic appliances, kerosene appliances -
Melbourne Tram Museum
Photograph - Composite image of cable tram maintenance facilities and grip mecanism, 1910c
Composite photograph from a journal showing five scenes of the equipment and operational facilities of the cable tram system - a power house, Nicholson St workshops paintshop, the iron shop and the wood shop. Includes an image of the grip mechanism.Yields information about the cable tram workshopsComposite photograph of cable tram maintenance facilities and grip mechanism.Melbourne 1 – Power House No. 3 2 – Paint shop – Nicholson St W/S 3 – Grip Mechanism 4 – Iron Shop – Nicholson St W/S 5 – Wood Shop – Nicholson St W/S Copy neg Mark Plummer collections ex late John Alfred collection. cable trams, melbourne, grip, workshops, nicholson st workshops, power house, engine house -
Flagstaff Hill Maritime Museum and Village
Tool - Caulking iron, mid-to-late 20th century
Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Calking iron, a metal tool with a round flat top and head that flares outwards to a wide wedge shape. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking iron, laurie dilks, l dilks, port and harbours melbourne -
Glenelg Shire Council Cultural Collection
Tool - Tool - Hand winch, n.d
Port of Portland Collection. Unknown.Front: - Back: -port of portland archives -
Robin Boyd Foundation
Furniture - Ladder-frame bookcase, Bruce Anderson
This wrought iron "ladder-frame" bookcase is located in Penleigh's bedroom. A second "ladder-frame" bookcase with a drop-down table is located in Suzy's bedroom (item F096). They were both designed by Bruce Anderson - in the past they have been incorrectly attributed to Clement Meadmore. This type of furniture was featured in 'The Age' Small Homes Service and a similar one was featured in 'The Age' Dream Home Exhibition in 1955. From 1947 to 1953, Robin Boyd was the director of The Small Homes Service, set up by the Royal Victorian Institute of Architects in conjunction with "The Age' and he produced a weekly article for 'The Age'. Wrought iron black frame with 10 ladder slots, and 3 cross brace frames, with 6 timber shelves. Shiny metal feet, nothing covering top of metal frame. bruce anderson, walsh st furnishings, robin boyd, small homes service