Silver trophy (cup-shape) with stem and round base. Two handle either side of the sup. Decorative floral patterns on all parts of the trophyNumurkah A & P Society, 1888, Presented to William Fairless, Gosforth Park, Baulkamaugh, by A B McKay & Co Standard Office Numurkah for best constructed silonumurkah show, numurakh a&p society, william fairless, 1888

Avonlea Dairy was located in Knox St Numurkah. This bottle was found at the home.2 x Glass milk bottles, cylinder shape with smaller neck than rest of bottle. Opening at the top is wider to allow for bottle top. (see photo) This bottle contains milk. Bottled for sale by J.J. Tyack Avonlea Dairy Numurkah. Bottle is the property of the above. It is loaned and cannot be legally used by others. One imperial pint. 621milk, bottle, avonlea dairy, j tyack

Brown furry material in the shape of a bear. Straw hat. Black plastic nose. Red material toungue. Red & white material eyes. No clothestoys, children, stuffed toy, humphrey bear, presents

Blue furry material in the shape of a rabbit. Yellow cloth & black plastic eyes. Light blue floral pattern cloth on stomach and inside of ears. toys, presents, children, stuffed toy, rabbit

2 x brass candlestick holders (vase shape) with decorative feather patterns on the side. The opening for the candles is shaped like open flower petalscandlestick holders, candles, light

Black painted wooden trophy in the shape of Australia on a wooden stand. A science and engineering challenge logo in on the left and a silver metal plaque in on the right reading:nationally sponsored by The Australian Constructors Association The Science & Engineering Grand Challenge 2009 Finalist This initiative is supported by the Australian Government through the Department of Innovation, Industry, Science and Research

Bendigo Bitter Beer Label. Oval shape, gree, red and yellow. Bendigo Bitter Beer on label. Brewed and bottled Bendigo, Victoria Australia.

The Fashion & Design collection of Kew Historical Society includes examples of textiles dating from the 18th, 19th and 20th centuries. Some of the textiles, were used as items of clothing, others as items of household decoration, or simply as travel souvenirs. These textiles were created both domestically and internationally. Predictably with the growth of an ethnically and culturally more diverse community in Kew after the Second World War, textiles, clothing and objects in the collection inevitably reflected this diversity. Lace collar attached to the neckline of a garment. It is narrow over the back , widens at the shoulders and tapers down in a triangular shape to a point on either side at the front. lace, women's clothing, collars

Gold-plated pin in shape of crossed racquets, studded with clear stones/glass, and green stone representing ball. Materials: Metal composite, Glasstennis

Cigar/cigarette cutter in shape of tennis racquet. Pushing ball-shaped knobs together releases cutters. Materials: Bone, Brass/Metal compositetennis

The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. While most of the hats in the collection were created by milliners for women, there are a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.Woman’s hat retailed by Beryl Richards of Melbourne which is constructed on a stiffened net and covered with pieces of white fabric cut to simulate the shape of petals.Label: Beryl Richards Hats - Melbourneberyl richards, milliners -- melbourne (vic.), women's clothing -- hats, headwear

Soft Cover Book with yellow cover imprinted with honeycomb shapes with a picture of a bee in a black square & the words accept, obey, serve 343 pagesOn the back are a few quotes from the book

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Metal stencil (steel), rusty rectangular shape, corners cut off. Lettering surrounded with blue paint. Square hole top RH corner."BMTC / PENANG"

Found in a box possibly used in battery operation.Two metal wheel shapes joined together by a short shaft. The larger metal wheel has cogs and spokes, the smaller wheel appears to be solid.

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Toby jugs date back to the mid-1760s in Staffordshire, England. The most common belief is that Toby Jugs were named for an 18th-century Yorkshire man who got the nickname Toby Fillpot after he drank 2,000 pints of Yorkshire stingo (ale). Original jugs usually showed a seated figure but over time they evolved to be character mugs, often featuring well known personalities. Simon Cellarer was the subject of a 19th century English folksong. The keys on the handle are those to his cellar, full of great wines and ales. He was always good for standing a drink for his friends. It was issued from 1936 to 1960.This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of pottery items popular in the 1930s to 1970s in Australian households.A ceramic Toby Jug depicting the character "Simon the Cellarer". The character wears a maroon hat and white ruff. The handle is in the shape of the keys to the cellar door.Around bottom of ruff: "Simon Cellarer:toby jugs, pottery, character jugs

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value was $2. The date is not known. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal badge with the Legacy torch, it is gold with white enamel around a torch and around the word Legacy with red enamel in the flame. It is a rectangular shape.On the reverse 'A J Parkes / Brisbane / $2'.legacy appeal, fundraising, badge week

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value was $5. The date is not known. It is the same style as a $5 badge but has a stick pin rather than a clasp. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal pin with the Legacy torch, it is gold with orange enamel around a torch with red enamel in the flame. It is an elongated pentagon shape on a stick pin.On the reverse 'A J Parkes / $5'.legacy appeal, fundraising, badge week

Victorian Scottish Regiment Champion Guard Plaza Ballroom - St Kilda July 2nd 1931 O.G Guard, CAPT H.H.Wheeler M.M. Presented by J.T Sargent, ESQ. Manager Plaza BallroomThe trophy has both handles in tact. Vase like trophy shape with handles shaped like upside down hocket sticks/nike logo.Won By Victorian Scottish Regiment Champion Guard Plaza Ballroom - St Kilda July 2nd 1931 O.G Guard, CAPT H.H.Wheeler M.M. Presented by J.T Sargent, ESQ. Manager Plaza Ballroom5/6 rvr, victorian scottish regiment champion guard, victorian scottish regiment st kilda, july 2nd 1931, capt h.h.wheeler, presented by j.t sargent

BHS CollectionSmall metal handle in an S shape with a wooden shaped piece to turn it with. 5 mm hole in one end where it fits onto shaft.small handle

Trapezoidal shape, narrower at the top. Folded sheet metal housing with attached handle. The clapper is a folded strip of metal attached to a wire hanger, by a bolt.

Was worn by donor's husband's grandmotherFeather Accessory. Three feathers 13 cm long, dyed orange and set in the shape of a fan into a 5cm long matching orange plastic holder.costume accessories, hat accessories

This barnacled bottle is typical of those used for storing and transporting liquor. It was probably made from 1840s-1870s. The marine barnacles on the bottle support the fact that it was recovered from sea. The bottle was found at the site of an unidentified shipwreck along the coast of Victoria around 100 years from when it was made. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and was in use in the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glassblower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, leaving a slightly flared out heel. The dip mould gives the body a slightly textured and sometimes rippled surface, with the free blown shoulders and neck being smoother and shinier. The mouth of this bottle appears to have been left unfinished, with the glass cut off from the glassblower’s pipe. There is a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of liquor bottles imported for use in Colonial Victoria in the mid-1800s to late 1800s and discovered in the State’s coastal waters. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; black glass, handmade. Applied square band around cut mouth. Bulbous neck, vague mould line around shoulder. Body surface has horizontal ripples, shape tapers inward to base. Shallow pushed-up base with outward flared heel. Cream and white barnacles on sides, base and in mouth.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, liquor bottle, ale bottle, 19th century bottle, collectable, black glass, buldge neck, bulbous neck, barnacles

This fret saw, with its unconventional up-side-down blade, was used in the making of intricate shapes for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This saw is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This saw was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Fret saw or coping saw. The fine-toothed, thin metal blade is held in place on the adjustable U shape frame by a swivelling spigot or clip at each end. The handle is turned wood, dark in colour. In this particular saw the blade is set into it upside down, and was used in this way for a specific purpose. This fret saw is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, fret saw, coping saw, wood cutting tool, carpenter's saw, carpentry, sovereign of the sea, ship model, hobby, ship model tool

This is a needle case produced in a novelty form. Sewing kits and needle cases were essential items for women to have in their houses, to take with them when travelling and to carry in their handbags for emergency repairs. Today needle cases are still used but less frequently as in past times, depending on the craft skills of the person and the hobbies pursued.This item has no known local significance but it is an interesting example of an early 20th century needle case and is retained for display purposes.This is a needle case in a wooden container made in a rectangular shape with a pointed top. The shape is in the form of a church with an affixed metal or paint shape of a church on the front of the container. The front of the container has been polished. The two sides of the container are affixed with two metal hinges and there is a metal clasp on one side. Part of the metal clasp is missing. Inside the container is padded with white/grey cotton material. On one side are two paper grey and black folders which once contained needles and on the other side there is a middle band to hold other needles or pins. This side has one rusty pin.‘Sharps 5/9 6, 7, Wartd. By Morris & Yeomans’household accessories, history of warrnambool

Clothing. Fine cream silk in a 8 pointed star shape, in the centre of the handkerchief - 15 cm diameter. Fine silk lace, 10 cm deep, surrounds this centrepiece. Adjoining the star shape is a one cm wide border, surrounded by 1.5 cm flowers, identical to those in the matching collar(11414.26). A Maltese Cross design in each corner brings the piece to a square shape. This joins fine lace in a flower and leaf design, with the Maltese Cross design in each corner, and at centre of each side. Fan-shaped edging surrounds the handkerchief, and a repeat of the needle - woven flowers as in 11414.26.costume accessories, female, silk handkerchief

Memorabilia of war service perhaps cast from a shell casing (?) in the shape of A.I.F. slouch hatExample of commemorative craft work pertaining to Australian Armed Forces.Cast decorative slouch hat, Recast(?) from shell casting.Nilhandmade brass casting

This model was an early venture by General Motors in a more streamlined body shape than previous vehicles.This 1959 Vauxhall was bodied by GMH at the Dandenong plant in 1959. This vehicle went on sale in competition to the new FB Holden and was originally considered a serious challenge to the Holden.White body, blue roof, Four door sedan with mirror on driver’s door.Vauxhall badge middle of bonnet.. Cresta badge rear quarter panel. Chrome strip with Vauxhall on boot. vehicle, vauxhall crest holden, car