This photograph depicts the style of MDNS uniform worn at that time, which was a grey cotton dress and red cardigan, over which was a woolen grey coat. The beret was of grey felt and had a red Maltese cross attached to the centre. Sister Wilson is about to enter her MDNS car, which was one of the early cars in the MDNS fleet, to drive to a patient to give nursing care.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state they were sold in 1927. A Motor Auxiliary was formed in 1929 to take Sisters to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of Sister Jill Wilson of the Melbourne District Nursing Society (MDNS) about to enter her work car. Sister Wilson is wearing her winter uniform, with a light grey beret over her short dark curled hair, and a long light grey coat which has lapels. She is standing side on, and to the left of the partially seen small white car. She is smiling and looking at the camera. Her right arm is extended with her hand on the handle of the partially opened car door and she is holding a white bag and cloth in her left hand. At her feet is her dark coloured, square shaped, nursing case which has a leather strap around the middle and two light coloured clasps each end, as well as a thick hard handle on the top. She is standing on the road and to her left, on the grass, are two lamp posts; small bushes can be seen as well as two trees in the distance. Two dark coloured buildings, one with a hip roof and one a flat roof, can be seen behind the car. rdns, motor vehicle, nurse, uniform, melbourne district nursing society, mdns, rdns transport, royal district nursing service, sister jill wilson

The President in 1974 was Bill Braidie. He gave comments he felt were relevant for the incoming President to know and commended past comments in the folder by previous presidents. The presidential year ran from March to the following February. Was in a binder of documents that is passed from an outgoing President to the incoming President. It is primarily from the 1930s to 1990s. Most documents are being catalogued separately.A record of the duties of the President in the 1970s.White foolscap paper x 1 page with black type of the President's comments in 1974.presidents, bill braidie

The President in 1975 was George Blackwood. He gave comments he felt were relevant for the incoming President to know and commended past comments in the folder by previous presidents. The presidential year ran from March to the following February. Was in a binder of documents that is passed from an outgoing President to the incoming President. It is primarily from the 1930s to 1990s. Most documents are being catalogued separately.A record of the duties of the President in the 1970s.White foolscap paper x 1 page with black type of the President's comments in 1975.presidents, george blackwood

The carbon rods were either used by 'Gem Pictures' or in the study of 'Electricity and Magnetism' at the Ballarat School of Mines. In electricity a current is conducted through carbon rod between the electrode holder and the arc in carbon arc lighting or welding. A carbon rod is also used in batteries. A tin full of carbon rodsOn box found with carbon rods: "Siemens-Planiawerke aktiengesellaschaft fur kohlefabrikate berline-Lichtenberg Made in Germany jede kohle trägt unseren vollen firmenstempel Translation: Siemens Planiawerke A corporation limited by shares producing carbon in Berlin-Lichtenberg Each carbon carries our full company stampballarat school of mines, carbon, carbon rod, arc lighting, electricity, henry sutton, theatre, projector, gem pictures

In 1941, the scientific instrument manufacturing firms of  Henry Hughes & Son Ltd, London, England, and  Kelvin Bottomley & Baird Ltd, Glasgow, Scotland, came together to form Kelvin & Hughes Ltd. Kelvin Company History: The origins of the company lie in the highly successful and strictly informal relationship between William Thomson (1824-1907), Professor of Natural Philosophy at Glasgow University from 1846-1899 and James White, a Glasgow optical maker. James White (1824-1884) founded the firm of James White, an optical instrument maker in Glasgow in 1850 and was involved in supplying and mending apparatus for Thomson university laboratory and working with him on experimental constructions. White was declared bankrupt in August 1861 and released several months later. In 1870, White was largely responsible for equipping William Thomson laboratory in the new University premises at Gilmore hill. From 1876, he was producing accurate compasses for metal ships to Thomson design during this period and this became an important part of his business in the last years of his life. He was also involved in the production of sophisticated-sounding machinery that Thomson had designed to address problems encountered laying cables at sea, helping to make possible the first transatlantic cable connection. At the same time, he continued to make a whole range of more conventional instruments such as telescopes, microscopes and surveying equipment. White's association with Thomson continued until he died. After his death, his business continued under the same name, being administered by Matthew Edwards (until 1891 when he left to set up his own company. Thomson who became Sir William Thomson and then Baron Kelvin of Largs in 1892, continued to maintain his interest in the business after James White's death. In 1884 raising most of the capital needed to construct and equip new workshops in Cambridge Street, Glasgow. At these premises, the company continued to make the compass Thomson had designed during the 1870s and to supply it in some quantity, especially to the Admiralty. At the same time, the firm became increasingly involved in the design, production and sale of electrical apparatus. In 1899, Lord Kelvin resigned from his University chair and became, in 1900, a director in the newly formed limited liability company Kelvin & James White Ltd which had acquired the business of James White. At the same time Kelvin's nephew, James Thomson Bottomley (1845-1926), joined the firm. In 1904, a London branch office was opened which by 1915 had become known as Kelvin, White & Hutton Ltd. Kelvin & James White Ltd underwent a further change of name in 1913, becoming Kelvin Bottomley & Baird Ltd. Hughes Company History: Henry Hughes & Sons were founded in 1838 in London as a maker of chronographic and scientific instruments. The firm was incorporated as “Henry Hughes & Sons Ltd” in 1903. In 1923, the company produced its first recording echo sounder and in 1935 a controlling interest in the company was acquired by S Smith & Son Ltd resulting in the development and production of marine and aircraft instruments. Following the London office's destruction in the Blitz of 1941, a collaboration was entered into with Kelvin, Bottomley & Baird Ltd resulting in the establishing “Marine Instruments Ltd”. Following the formal amalgamation of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd in 1947 to form Kelvin & Hughes Ltd. Marine Instruments Ltd then acted as regional agents in the UK for Kelvin & Hughes Ltd who were essentially now a part of Smith's Industries Ltd founded in 1944 and the successors of S. Smith & Son Ltd. Kelvin & Hughes Ltd went on to develop various marine radar and echo sounders supplying the Ministry of Transport, and later the Ministry of Defence. The firm was liquidated in 1966 but the name was continued as Kelvin Hughes, a division of the Smiths Group. In 2002, Kelvin Hughes continues to produce and develop marine instruments for commercial and military. G. Falconer Company History: G Falconer (Hong Kong Ltd) appear to have had a retail presence in Hong Kong since 1885, according to the company website, and currently have a shop in the Peninsula Hotel. G Falconer was the Hong Kong selling agent for several British companies. Ross Ltd of 111 New Bond St London was one and the other was Kelvins Nautical Instruments. Falconers were primarily watchmakers, jewellers and diamond merchants.They were also agents for Admiralty Charts, Ross binoculars and telescopes, and sold English Silverware and High Class English Jewellery. In 1928 the company was operating from the Union Building opposite the Hong Kong general post office. It is unclear if the item is an original Sextant made by Kelvin prior to his amalgamation with Henry Hughes & Sons in 1941 as Kelvin appears to have only made compasses up to this date. If the Sextant can be established that it was made by Kelvin then it is very significant and a rare item made for and distributed through their Hong Kong selling agents G Falconer Ltd. There are many Sextants advertised for sale stating "Kelvin & Hughes 1917 model sextant". These can be regarded as replicas as the company was not formed until 1941 and production of marine instruments was not fully under way until after the war in 1947. Further investigation needs to be undertaken to accurately determine the provenance of this item. As the writer currently has the impression that the subject object was possibly made by Kelvin and Hughes in the mid to late 20th century or is a replica made by an unknown maker in the late 1970s. Purchased as an exhibition of marine navigational instruments for the Flagstaff Hill museum. The Sextant is a brass apparatus with filters and telescope lens, and comes with a wooden felt lined storage box. It is a doubly reflecting navigation instrument that measures the angular distance between two visible objects. The primary use of a sextant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation.G Falconer and Co. Hong Kong (retailers of nautical equipmentflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sextant, kelvin & hughes ltd, hong kong, navigational instrument, g falconer, mariner's quadrants

These are two pennants awarded to the winners of the Victorian Indoor Bias Bowls Association (perhaps the Warrnambool division) in 1980 and 2003. The winners were presumably the members of the St. John’s Bowls Club (associated with the Presbyterian Church, Warrnambool) as these pennants come from their collection. St. John’s Bowls Club was prominent in Warrnambool in the 20th century but was disbanded in the second decade of the 21st century. The Henselite company that sponsored these trophies is an Australian company that is the biggest manufacturer of lawn bowls world-wide. R.W.Hensell was the first to produce the plastic bowl in 1930 when the company was formed. These two pennants are of interest because they came from the St. John’s Bowls Cub in Warrnambool, a club no longer existing. Bowls is a very popular sport in Australia. These are two pennants from the Victorian Indoor Bias Bowls Association. Both are triangular in shape and made of felt cloth. One is white with a dark blue edging stitched on and dark blue lettering stamped on. The other is a cream colour with dark blue edging stitched on and dark blue lettering stamped on. .1 – ‘V.I.B.B.A. The Henselite Pennant, Winners 2003’ .2 – ‘V.I.B.B.A. The Henselite Pennant Winners 1980’ victorian indoor bias bowls association, henselite australia pty ltd, st. john’s bowls club, warrnambool., warrnambool

Part of the Leo Reoch Cohn Collection. See Catalogue No. 5527.2 for his service record.Australian Army khaki felt slouch hat with a light khaki cotton seven-pleat fabric puggaree. Four holes in the side of the crown for ventilation. Brass clip and hook on the left-hand side of the hat for pinning up the left brim. Brown leather sweat band and chin strap.Stamped on sweat band in white: 'MADE BY "FEYREFIELD" MELBOURNE, 7, 1965'.army headwear, slouch hat, leo reoch cohn

Item in the collection relating to Peter Dodd, refer collection Cat No 2436.2P.1) Australian Active Service 1945 - 75 with two clasps, “Vietnam & Malaya”, replica medal not engraved. .2)Box black colour vinyl outer, inside is black felt with inset for the medal, lid has white velvet liner, front of lid has description of contents in silver.medals, active servce, vietnam, malaya

Part of a nurses' uniform during the Second World War. Khaki wool felt hat with wide brim and burgandy-brown grosgrain ribbon band with bow on right side. The hat also has a grosgrain sweatband with a maker's label sewn in on the interior. This is marked in ink with manufacturers' label. Elastic chip strap on interior has deteriorated and broken in half.Label on interior reads "MADE IN AUSTRALIA/UIM/N451-1943/SIZE 6 5/8 - 21 1/4 in." second world war, world war ii, world war 2, world war two, wwii, nurse, medical, women

Part of a nurses' uniform during the Second World War. Khaki wool felt hat with wide brim and burgandy-brown grosgrain ribbon band with bow on right side. The hat also has a grosgrain sweatband with a maker's label sewn in on the interior. This is marked in ink with manufacturers' label. Elastic chip strap on interior is secure and matches colour of grosgrain.Label on interior reads "N513/1943/MADE IN AUSTRALIA/6-5/8"second world war, world war ii, world war 2, world war two, wwii, nurse, medical, women

Items issued Geoff Murray No 3411521, refer Cat No 638P for his service details..1) Water bottle Australian, plastic , green with screw top lid, Kidney shape. .2) Water bottle carrier Australian , green webbing, felt lined with 2 steel clips on rear. .3) Mug, steel, Australian, Kidney shaped, has fold out steel handle..1) " 8465-71-10808703" .3) "8645-50-242-7843"uniforms, male, military equipment, contiainers

Felt & Tarrant Mfg Co, Chicago, USA Note;’For history see extract from EM Horsburgh (editor) “Modern Instruments of Calculation” pp. 98-102. New introduction by Michael R Williams (1st 1914, 2nd 1984). TOMASH Publishers, Los Angeles, San Francisco.

Worn by a Ruyton Girls' School student 1984-1990 as part of winter school uniform.Navy blue wool felt beret. Features additional square cloth panel hand sewn onto centre front. Panel shows embroidered Ruyton Girls' School crest of an 'Old English' alphabet character 'R' in gold thread on navy blue background. Interior of beret is plain.'R'ruyton girls' school, kew, school uniform, hat, 1980s, 1990s, school crest, embroidery, private school

See Ref NA4362Green felt pennant with a badge of 'Friends of the Lake' attached. The pennant also has a ribbon pinned under the lake badge, Supporting Nunawading Parks and Recreation Department. The writing and insignia on the ribbon is gold on green ribbon. The pennant has gold cord to hang and gold fringe stitched to the base.civic mementoes, souvenirs, trophies & awards, education

'Horsman's Tiddledy Wink Tennis' game set. Lithographed cardboard box containing a dyed felt playing area, 30 small and two large coloured discs, a cardboard 'net' with wood support stands, and a small wooden cup. Materials: Cardboard, Paper, Ink, Wood, Glue, Bonetennis

A brown unbranded box of six tennis balls. Each ball is white, printed with an 'R' logo and wrapped in piece of waxed paper. Adhesive label on base of box states: 'HARRODS/ Z6 65/ 6/6DZ'. Materials: Cardboard, Felt, Rubber, Adhesive label, Ink, Paper, Waxtennis

Early in the 1970s a number of people felt the need in the Greensborough community for an Arts Society, Prominent among them were were Ron Reynolds, Digby Watson, Murray Pulford, Roland and Maria Schultz. An article appeared in the Greenhills Community News seeking those interested in participating in such a society. A meeting was held in the home of Ron Reynolds on 15th July 1970 with approx. 20 people attending.Two tone light and dark brown cover with artists palette design on the front and sketch of Greensborough Primary School on rear coverOriginal owner written in pencil as June Hall arts society, ron reynolds, diamond valley art awards, digby watson, roland schultz, maria schultz, murray pulford, jan lowe, diamond valley arts society

This small Braille teaching cube attached to a keyring can be used to make the shapes of Braille characters. The surface of cube is studded with large black rivets and when the three main parts of it are rotated, the shapes of a single braille character can be seen and felt. The cube features raised dots in 3 independently revolving sections. These can be turned to form different Braille letters for teaching purposes. 1 bright yellow Braille keyring cube with black dots on itbraille equipment, education aids and devices

Created by members of the day centre at Kooyong in the 1990's, weaving was an activity that provided an opportunity to create tactile artwork. In this example, a rectangular shaped woven wall hanging attached to a brown hessian backing and stuck onto a piece of chipboard. Woven piece depicts a series of horizontal stripes in browns, blues, and greens, and grays. Middle section has four felt black and red houses.association for the blind, art works

The President in 1987 was Bruce Wilson. He included observations based on his year as President. He felt record keeping was an cost burden. The document is dated 29 February 1988 as the presidential year ran from March to the following February. Was in a binder of documents that is passed from an outgoing President to the incoming President. It is primarily from the 1930s to 1990s. Most documents are being catalogued separately.A record of the ideas of the President in the 1980s.White foolscap paper x 2 pages with black type of the President's comments in 1987.Signed in blue pen 'Bruce Wilson 29/2/88'.presidents, bruce wilson

Helmet issued to GREG FARMER 8442898 Served IRAQ 2004 SECDET 4 BRAVO; Served IRAQ 2005/2006 AMTGZ 2nd CAV REG 2004-2008 ASLAU- DRIVER, GUNNER, COMMANDER (SECDET) security detachment (AMTGZ ) AL Muthanna Task Group Helmet- Kevlar, green colour, round dome shape complete with chin strap, headphones and microphone attached to inner fabric liningHandwritten- back of helmet exterior black felt tipped pen “ FARMS/V1D/V1F” Makers label- black print on white sticker /^/MEDIUM/8470-66-140-6673/ Z0101/999-9-49677-001/47176uniform, head wear, iraq, kevlar helmet

Comb bound (white plastic) specification or tender document, approx. 70 pages, with glossy card covers, titled "Tender Schedule for All-Electric Trams", published by the Melbourne and Metropolitan Tramways Board, closing 12 September 1966. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Second copy from same donor added 9-3-2017 See Reg Item 2266 for the 1972 version and 4667 for a draft version - dated June 1965. See Item 4388 for the Z3 document. See Reg Item 4049 for associated newspaper cuttings.In red felt pen on top right hand corner "(1966)". Has stamp "Discarded from PTC Library 22 Oct. 1989" on front cover. 2nd copy has "1966" in ink in top right hand corner.trams, tramways, specification, tenders, z class, mmtb, melbourne

The Squirrel is a small to medium sized member of the rodent family Sciuridae. They are commonly located in America, Eurasia and Africa. The Squirrel was introduced to Australia by humans. Interestingly, the tail of the Squirrel serves the purpose of keeping the rain, wind or cold off the body of the animal, to help it cool off in hot weather, to counterbalance when moving and can be utilized as a parachute when jumping from one location to the next. Squirrels consume foods that are rich in protein, carbohydrates and fats. They eat nuts, seeds. fruits and vegetation. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.Grey Squirrel standing on a wooden platform. The small sized specimen holds an acorn between its hands and has a paper identification tag tied to one of its arms. Small acorns are arranged around the specimen's feet. It has orange coloured fur with a pale belly and dark coloured glass eyes. It has a long and bushy tail that stands along its back in an arched shape. It has tiny hands and feet.42. Common Squirrel / Catalogue, page, 50 / A.4487 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel

Clothing. Dark brown fox fur cape with two tails at front (30 x cm X 7 cm) and two tails at back (34 cm X 7 cm). Lined with brown cotton fabric. Head of fox still attached with slide clip on back. A 33 cm cord chain is attached near the seams joining the two back tails. A cord hook is attached at the base of the fox head.costume accessories, female, fox fur cape

Angus Mackay enlisted on 22.4.1915 in the 7th Reinforcements 5th Battalian AIF No 2486. He later transfered to the 57th Battalian AIF. Wounded in action and while being treated in the field a shell burst overhead killing him instantly on 19.8.1916. The wallet and photos belonged to his best mate George Freeman No 2485. They joined up together both aged 18 years and went wherever the other went.The wallet is a dark green in colour. It consists of three layers of material. The outer cover and inner section are both cotton and sewn together around the edges. Where the photos sit there is a fine layer of felt that sits over the photo to protect it. The photos are Post Card style copies of the originals for display purposes.The wallet has no markings or inscriptions. The grave photo on the Cross has the following; “IN LOVING MEMORY, KILLED IN ACTION, No 2486, SIG ANGUS MACKAY, HQ S” The rest is hidden under the flowers. The photo of Mackay himself has a seal or stamp in the right hand corner at the bottom; “W.Vincent Kelly Bendigo”wallet, photos, angus mackay, no 2486

Red felt Hostess hat with small brim with 4 small Dents to top left back side, 1 small dent to front. Thin red band with 3 lines of white stitches around crown of hat with 2 tabs, Black band inside with black hat elastic sewn in by Nivek Headwear Reg. Melb.

Owned by Arthur McCann a guard at Camp 3Camp 3Wooden Jewellery Box, with corner feet attached with tacks and a double hinged lid , 4 x section lift out insert. Light colour wood, insert lined with green felt. Lid in 2 sections and glued to a surrounding edge. Lid also appears to have been sanded downNumbers on bottom written in pencil 4....32.....18 .... 2 .......30 .... some writing un readable