Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsPin head consists of one eight petaled flower, two seed pods half open and one long leaf connecting leaf with seed pods. pin head and shaft are gold coloured. see KVHS 0351 for a cleaner itemmillinery, costume, pin hat accessories, female hair restrainer

This short wooden barbed spear (138.5cm) has the head and tail bound separately to the shaft using sinew and resin. The tail is angled at about 20 degrees to the shaft. The barb is also bound to the head with sinew at 9cm from the spear tip.

Copy of a black and white photo of the Victoria Quartz Mine showing the poppet head, chimney and two buildings. Printed underneath is: Victoria Quartz. The head frame here is the third erected. It was needed to cope with increased haulage as the shaft went deeper.bendigo, history, long gully history group, the long gully history group - victoria quartz

8424.1 - Pickaxe-long wooden handle growing thicker towards ends; thickest end holds pickaxe head- one side long and pointed, the other flattened, like a chisel. head has, however, become detached from the handle.

The puppets were made by German POW's in camp 13 and sent to internment camp 3 as gifts for the children at Christmas time.Hand painted green paper mache head. Teeth and inside of jaw painted red with red fabric lining at back of jaw. Black painted eyes. The body is of green fabric, hand stitched to leather which is tacked to the crocodiles head.hand puppets, internment camp hand crafts, pow puppets, sharon lohe, ww2 camp puppet theatre, crocodile puppet

The puppets were made by German POW's in camp 13 and sent to internment camp 3 as gifts for the children at Christmas time.Paper mache head hand painted brown with black hair and beard. Bright blue painted eyes. Black and white check hat. Brown fabric body with purple and white striped tie. Attached with tacks to wooden head support.pow puppets, pow handcrafts, hand puppets, sharron lohe

Frances Rigg was a local business identity in Kew, at one stage managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and medallions was inherited by his son, Ken Rigg (1922-2014). The collection was subsequently donated to the Kew Historical Society in 2015 by Francis' grandson, Adrian Rigg, at the time of the Gallipoli & Beyond Commemoration in 2015. The collection covers a period of almost 40 years. The majority of the buttons are patriotic buttons, issued and sold during and immediately after the First World World War (1914-1918) to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.Patriotic and other pressed tin buttons and badges were produced in large numbers in the first decades of the twentieth century. By nature, insubstantial and ephemeral, they have not always survived. The collections of badges, buttons and medallions in the Kew Historical Society collection is homogenous and yet diverse, ranging from buttons sold to raise funds for the war efforts in 1914-18 and 1939-45, to those used at festivals and sporting events. Because of the manufacturing process, many surviving buttons and badges have been affected by inadequate storage, suffering from oxidisation and physical damage. These survivors are now historically and socially significant artefacts, revealing much about the attitudes and values of the period in which they were produced. Their widespread distribution means that they are frequently significant at a local, state, national and international level.A circular pressed tin fundraising badge showing an armed soldier advancing through a rocky landscape. The soldier’s head is bandaged and spots of red indicate that the soldier has sustained wounds to the head and hand. The badge bears the word ‘Copyright’ on the border.Lest We Forgetpatriotic buttons, first world war (1914-18), numismatics, lest we forget, world war one, wwi, memorials

List - Telephone or Phone numbers - 3 cards - laminated into heavy plastic, head "New D/S" - District Superintendent - list phone numbers for Malvern Depot, Head Office, signal boxes, Emergency Services, depots and other locations.trams, tramways, telephones, malvern depot, head office

This all-metal centre pop punch tool has a rounded point, thick body and flat round head. The centre of the body is concave to allow a strong grip. This also creates a flat side and would prevent the tool from rolling off the workbench. The ‘centre pop’ in a shipwright’s toolbox may have been used as a punch to remove the ‘eyes’ from a ‘dead eye’ pulley or other jobs that needed a hole removed from the work. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Centre pop tool; all metal punch with a flat head, wide handle section and a shaft that tapers inwards towards the end. It is shaped for a good grip. It once belonged to shipwright Laurie Dinks.flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, shackle punch, breakdown tool, chains, links, centre pop, punch, laurie dilks, l dilks, port and harbours melbourne

This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. The red-and green Australian King-Parrot is seldom seen flying above the tree tops of the dense forests which it inhabits — it prefers to fly below tree level, weaving in and out through the tree trunks instead. When they are disturbed by a person, they usually fly off with a harsh screech, and often do not land until they are lost to view. Their flight is swift and strong, characterised by deep, rhythmic wing-beats and regularly punctuated with rapid twists and turns.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. Male Australian King-Parrots are the only Australian parrots with a completely red head. Females are similar to males except that they have a completely green head and breast. Both sexes have a red belly and a green back, with green wings and a long green tail. King parrots are normally encountered in pairs or family groups. This particular specimen has duller colour and appears more orange with a misshapen head Label: National Museum Victoria / King Parrot / Aprosmietus W5435 / Gris (recht) Mount: APPOSMICTUS / SCAPULARIS / King Parrottaxidermy, parrot, bird, king parrot

A wooden, open throat, slotted handle racquet, with a 13 1/2 inch head. Inscription along base of head of obverse: LAKEWOOD. Inscription across base of head of reverse: HARRY C. LEE & CO/NEW YORK. Inscriptions featuring manufacturing and patent details situated along the sides of the stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Paint, Metal, Clothtennis

Head set used for communications equipment. Consists of two earpiece receivers attached to a head band with a flexible cable for connection. The cable terminates in a two pole line plug. The earpices have a protective rubber shroud and one has a cloth cover.The ear receivers have the following, 'ANB-H-1 MADE IN USA BY UTAH-CHICAGO'radio, ww2, communications, headphones, radio, ww2, communications, headphones

Small oval head and shoulder portrait of a lady wearing a dark dress with a wide crocheted collar and a brooch at the neck. She has a lacy type of head dress. Photo mounted on dark brown card with the photographer's name printed in red on the back.M. W. Bent, Pall Mallphotograph, portrait, male, portrait of a lady, m w bent

Slide: Lansell's Big 180 Mine. New Chum Hill in background. Image shows mine shed on LH side, poppet head in centre, three poppet heads in background. Image sourced from 'Bendigo and Vicinity' facing page 16.No. 8 on bottom of slidemine, gold, new chum hill, 180 mine., bendigo mines-jack hattam collection

Mrs Mary Holden (1843 - 1930) was the mother of the Rev Albert Thomas Holden CBE V.D., B.A., D.D. Director of the Methodist Inland Missions, Chaplain-General of the A.I.F. and President-General of the Methodist Conference of Australasia. She was the mother-in-law of the Rev. Samuel HobanB & W composite photo of the Young Men's Class at Ashby Methodist Sunday School in Wellington Street, comprising 30 oval head and shoulders photos of the young men, and 1 rectangular head and shoulders photo of their teacher, Mrs T. Holden."Wellington Street Methodist Sunday School Young Men's Class. Presented to Mrs T. Holden as a slight token of esteem and respect from the members of her class. March 1908. P. Buchanan,N. Buchanan, L. Pash, T. Cortous, C. Walter, B. Palmer, S. Dorling, W. Hancock, N. Potter, E. Thomas, E. Potter, H. Reeves, R. McCann, H. Gallagher, P. Baxter, L. Viccars, F. Walker, F. Wynn, E. Whitton, J. Thomson, A. Sykes, W. Gallagher, G. Littleton, A. Wilson, N. Johnston, H. Viccars, H. Bell, C. Cortous, C. Bond, L. Muir, R. Thomson, H. Johnston.mary holden, rev albert thomas holden, rev samuel hoban, ashby methodist, sunday school

Scotchmans United Quartz Mining Company Shaft was 1,018 feet deep.Stawell Mining Scene from Big Hill. Close up view of the winding engine shed Poppet Head and Building Scotchman's United Mine. Rear poppet head Crown Cross. Upper Main Street visible left Back of Photo. Stawell 176 Miles from Melbournemining, panorama

Framed black and white head and shoulder portrait of Councillor Read with hand coloured and drawn detail. Head profile facing right with beard. Cut oval brown mount decorated with text and scrolls. Hand written title top and lower centre.Strathfieldsaye Shire / Council / W H Robinson / Photo / J H Gribble / Chas. My. Read. President 1886 - 7 / Presented by his sonsstrathfieldsaye shire council, president of strathfieldsaye shire, president read

Used in the mid 20th century.A forged steel hatchet with an axe head, hammer head, nail puller and a lever hole. It has a short metal cased wooden handle with brass rivets. It was used as a trimming hatchet or axe in the mid 20th century. It is a 'Swordfish' brand, made in China.Inscribed with Swordfish brand Made in China with a picture of a swordfish. woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, hatchets, cleavers, tomahawks, wood

A cooper would use a flagging iron to insert reeds around the head of a barrel to tighten the head and stop any leaks. First the cooper removes the full and quarter metal hoops around the barrel, this loosens the staves and insert reeds around the head, prying the stave apart from the head with a flagging iron. Then he replaces the hoops to tighten the staves against the head and the inserted reeds to form a leakproof seal.An age old tool used for many hundreds of years in the making and repairing of wooden barrels and an essential tool in a coopers tool kit.Flagging iron metal painted black Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagging iron, coopers tools, barrel making, repairing barrel leaks, barrel head tightening

A cooper would use a flagging iron to insert reeds around the head of a barrel to tighten the head and stop any leaks. First the cooper removes the full and quarter metal hoops around the barrel, this loosens the staves and insert reeds around the head, prying the stave apart from the head with a flagging iron. Then he replaces the hoops to tighten the staves against the head and the inserted reeds to form a leakproof seal.An age old tool used for many hundreds of years in the making and repairing of wooden barrels and an essential tool in a coopers tool kit.Coopers small Flagging iron metal painted black Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagging iron, coopers tools, barrel making, repairing barrel leaks, barrel head tightening

This is a photograph of Councillor Charles Henry Grove who represented South Riding on the Orbost Shire Council. from 1893 - 1901. He was president in 1893-1894, 1895-1896 and 1900-1901. He also served on the Tambo Shire prior to the formation of the Croajingolong / Orbost Shire. Charles Henry [Carl] Grove died on 17/4/1938 at Box Hill at the age of 88 and was buried in Orbost. Prior to coming to the Snowy River district, Carl worked as overseer on Buchan Station. In 1880, he selected land at Newmerella after first coming here in 1874 with early selector James A Robertson. He married Annie Robertson in 1876. Carl was a farmer, hop and seed grower and nurseryman. He was an elected Councillor of the newly formed Tambo Shire in 1882, and then in 1892 to the Orbost Shire where he served for many years filling various public roles. In 1911, he shifted to Queensland, but later returned to Victoria and died at Box Hill. (info. Newsletter 113)This item is associated with the Orbost Shire Council. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council. It is associated with Carl Grove, a prominent early Orbost citizen.A black / white head and shoulders portrait photograph of a bearded man in a suit. There is also a framed copy.grove-charles-henry grove-carl orbost-shire-council

This is a photograph of Councillor Hamilton Rutherford Reed who represented North Riding 1918 - 1936. Hamilton Reed was an early settler at Goongerah. In 1868 Hamilton Reed and John Locke both of Bendoc secured a grazing area of 60,000 acres at Goongerah. About the year 1878 Hamilton Reed and C. W. Nicholson decided to, if possible, to go from Bendoc to Orbost via Goongerah, they accomplished the task in 4 days from Goongerah. (more info. Newsletter September 2004)This item is associated with the Orbost Shire Council. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council.A black / white head and shoulders portrait photograph of a moustached man in a suit. There is also a framed photograph.on back - "Cr H.R. Reed, North Riding 1918-1936"reed-hamilton-rutherford goongerah-history orbost-shire-council

This is a photograph of Tambo and Orbost Shire Councillor, Hugh Cameron (born 1850 died 1921) who represented S R/ Bendoc Riding in 1184-1886 and from 1891-1892. Hugh Cameron was also on the Orbost Shire council from 1892-1915. (more info. in O.D.H.S. newsletter -Tambo Shire)This item is associated with the Orbost Shire Council. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council. It is also associated with Hugh Cameron.A black / white head and shoulders portrait photograph of a bearded man in a suit.There is also a framed photograph.cameron-hugh orbost-shire-council

This is a photograph of Councillor George Nixon who represented South Riding on the Orbost Shire Council from 1902 - 1916. He was president 1914-1915. George Nixon (1862-1941) selected land in Bete Bolong in the 1890's. He married Emily Warren in 1889 in Orbost. He was a shire councillor. He was a prominent breeder of Clydesdales and after a serious fall off a horse walked with a walking stick and special boot for the rest of his life. He was well-known for his interest in cars, horse-racing and politics.He was married to Emily Warren in 1889 in Orbost. Mrs Nixon (Emily)was the first Red Cross president during WW1. They had ten children.both George and Emily are buried in the Orbost Cemetery. (ref:From White Knowle to Pumpkin Point by Hon Peter Nixon A.O.)This item is associated with the Orbost Shire Council. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council. This item is associated with a prominent Orbost family. George Nixon was the son of James and Alice Nixon. The Nixon families were among the earliest settlers on the Snowy River.A black / white head and shoulders portrait photograph of man wearing a suit.There is also a framed copy.nixon-george orbost-shire-council

Punch, metal, with round burred head, four flat sides that taper to a flat narrow endflagstaff hill, flagstaff hill maritime museum and village, punch, tool, metal work, metal work equipment, carpenter tool, sailmaker tool

This is a photograph of Mr John Scouller (born 1861 , died 1935) who was the first manager of the Orbost Butter Factory which opened in 1892. He filled the position for thirty years.John Scouller was a prominent Orbost citizen in the late 19th and earyl 20th centuries.A black / white head and shoulders portrait of a balding man with a moustache. He is wearing a suit and tie.scouller-john orbost-butter-factory

The intrenching tool of the Australian soldier was a British design. It is carried in an Australian leather infantry equipment blade carrier, commonly known as P15 equipment The Australian version was made of two pieces, riveted together with three rivets. The depth of the handle (helve) collar is considerably thicker than the accepted British pattern of the same time. http://www.grantsmilitaria.com/Steel trenching tool head with shovel enf and pick end Oval hole for fitting handleStamped AUSTRALIAtrenching tool. entrenching tool

Passport photos of Frederick Gardner DAVEY to be used in a passport in case of escape from POW camp. Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.1) & .2) Black / white passport sized head & shoulders photos of a man in civilian clothes..1) Handwritten on back in black ink: 1942 Escape photo for passportphotography, identification raaf

Framed large ink drawing of a ten head battery, winding and pumping machines, gearhouse and framing. caxton company, smythesdale, w. watson, architectural plan

WW1 gas mask, full head and neck covering, two eye glasses and mouth piece.military-equipment, protective, gas