Showing 4561 items
matching rsl australia
-
Warrnambool RSL Sub Branch
Pewter Tankard (One of Pair), 1942
The pewter tankard is part of a set of two that were presented to Lt. Col. L.G. Stevens of the 4th Light-horse Regiment. The Regiment was part of the Australian Military force in the First World War (WW1). At the end of WW1 the regiment was disbanded and it was re-raised in the 1920's as a part-time unit in the Shire of Corangamite, South Western Victoria. In World War 2 the 4th Light-horse Regiment was mechanised and became the 4th Motor Regiment. Lt.Col. Stevens served in both wars and was discharged in July 1942.. The tankards were probably presented to Lt. Col. Stevens at his retirement from the service. The set of two pewter mugs is of historic significance because of its connection to WW2 and the AIF. It indicates the relationship between Officers and Men of the regiment. It is of local significance as Lt. Col. Stevens was born and lived in Warrnambool, South Western Victoria. Pewter tankard (one of two) height 13mm circumference 3mm, ornate broken C handle height 9 mm, inscription on front, hall mark on base, mild tarnish, Inscription on front "PRESENTED TO LIEUT COL L.G. STEVENS ED. By the Officers of the 4th MOTOR REGIMENT 1.5.42 Hallmark on base "Crown & Rose" CAST PEWTER, CREST CROWN & ROSE3 surrounded by FIDE IN LONDONpewter tankards, world war 1, first world war, ww1, light horse regiment, 4th motor regiment, australian military force, aif, corangamite, 1942, world war 2, ww2 -
Warrnambool RSL Sub Branch
Army Slouch Hat, John Bardsley & Son Pty Ltd, Hat Khaki, fur Felt, Unknown - estimated in1980s
Worn by Major Bernard Farley whilst serving at at 8/7 RVR as A company Commander, Support Company Commander 1997-1999, posted to CATDC Capability Development unit at Puckapunyal VIC in 2000 - 2001 Personal uniform item worn by the donatorArmy Slouch Hat with, puggaree, unit badge of 7/8RVR (located on front of Puggaree), Unit colour patch (white over red) located on the pugarree right side, the rising sun badge is located on turned up (left under side) of the brim. The hat is complete with a chin strapHat Badge - Unit ensigns of 8/7RVR Batallion headquartered in Ballarat VIC The Unit Colour patch is white over red and signifies the blood and bandages that was born on the WWI French battlefield that form part of the units history. Rising Sun Badge - The ensigns of the Australian Army -
Warrnambool RSL Sub Branch
Jacket, Commonwealth Government Clothing Factory (C.G.C.F.), 1970s
This jacket is part of a winter mess dress uniform belonging to Bernard Farley during service with the Australian Airforce. Worn in 1978, this jacket style was first developed in the 1950s and continues to be worn as mess uniform in the present day.This item has aesthetic significance and is a representative example of uniform design from the 1950s to present day. This item has clear provenance, having been donated by RSL member and Secretary (2019), Bernard Farley after its use during Bernard’s service in the Airforce. As a former member of the Australian Airforce and member of the Warrnambool ex-service community, Bernard’s uniform has great social significance, telling a broader story of life after service.Dark navy blue dress jacket with long sleeves ending at waist height. Jacket is double breasted with eight metal buttons; two buttons are larger and held on by safety pins. Buttons are gold in colour and marked with a crown and eagle motif. Lapels on jacket are of a lighter, grey-blue. Jacket is adorned with epaulettes on both left and right shoulder, attached with a cotton loop on each shoulder and held in place with a screw-in gold button. Jacket has synthetic lining in cream colour and an interior pocket on the left hand side; lining is detatched on both the left and right sides at the base. Label on interior collar reads “C.G.C.F” Epaulettes bear three lines in gold embroidered stitching and a badge depicting an eagle underneath a crown, also in gold. dress uniform, airforce, commonwealth government clothing factory, uniform, epaulette -
Warrnambool RSL Sub Branch
Uniform - Army, Jacket, C1968
... work and dress parades. warrnambool rsl royal australian ...This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of uniform worn by soldier ranks for daily work and dress parades.Khaki coloured short jacket with lapels, and waist band which has strap and buckle on right hand side. There are two patch pockets on the front have a box pleat down the middle and a V shaped pocket flap at the top, closing with a hidden button. The shoulder epaulets each have a plain khaki coloured button at the neck edge.The sleeves are cuffed fastened with a button however the right button is missing.There are red patches on each shoulder with navy blue text. The back of the jacket has darts stitched at the waist and at shoulder level. There are four khaki buttons down the front. The sleeve seams are bound in cotton tape which also forms a label on the back neck collar with the lining of the waist band also in a cotton twill.Stitched in navy blue on arm banners,” Royal Australian Engineers.” On inner label, “ DUNLOP NSW 1968 8405-66-025-6411 SIZE OF CHEST 35/36S MATCHING TROUSERS 29/30S WAIST DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY . NAME....HUGHES ( in blue pen) ARMY NO... 3795948 (in blue pen)warrnambool rsl, royal australian engineers, hughes 3795948 -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN), Naval Ratings Bib
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. This bib is one of four parts to a Naval Ratings Uniform which was presumably owned by J.M. Parsons.This bib is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Cream cotton twill with navy blue trim around neck and over shoulders and narrow tie fastener.label of maker "Made in Australia Berlei Berlie Ltd Size 1" navy, ran, royal australian navy, naval bib, naval ratings bib, naval ratings uniform, military uniform, j.m. parsons, parsons, j parsons -
Warrnambool RSL Sub Branch
Army Uniform trousers, 1968
... Warrnambool RSL Sub Branch Cnr Merri & Liebig Streets ...This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army -
Warrnambool RSL Sub Branch
Trousers, Australian Government Clothing Factory (A.G.C.F.), 1978
These trousers are part of a winter mess dress uniform belonging to Bernard Farley during service with the Australian Airforce. Worn in 1978, this trouser style was first developed in the 1950s and continues to be worn as mess uniform in the present day.This item has aesthetic significance and is a representative example of uniform design from the 1950s to present day. This item has clear provenance, having been donated by RSL member and Secretary (2019), Bernard Farley after its use during Bernard’s service in the Airforce. As a former member of the Australian Airforce and member of the Warrnambool ex-service community, Bernard’s uniform has great social significance, telling a broader story of life after service.Dark navy blue dress trousers with cream coloured lining on waistband and pockets; dark synthetic material rectangles are sewn on interior of pants hem on pressed edge. Seven buttons, coloured black, are present on the interior of the waistband and were likely used as attachments for suspenders; reverse of pants rise into two points either side of the spine. Pants are fastened with a black plastic zip and a hook and eye at the top of the fly. Two pockets are present on both left and right hips and one small pocket on the front right hand side near the pelvic bone. Fabric is pleated twice on the front and has two darts on the reverse. Label on interior collar reads “A.G.C.F./VIC. 1978/(arrow symbol)/NO./NAME” Inscription on interior left hand pocket lining reads “992”dress uniform, airforce, commonwealth government clothing factory, uniform -
Warrnambool RSL Sub Branch
Cummerbund, Australian Government Clothing Factory (A.G.C.F.), 1983
This cummerbund is part of a winter mess dress uniform belonging to Bernard Farley during service with the Australian Airforce. Worn in 1978, this cummerbund style was first developed in the 1950s and continues to be worn as mess uniform in the present day.This item has aesthetic significance and is a representative example of uniform design from the 1950s to present day. This item has clear provenance, having been donated by RSL member and Secretary (2019), Bernard Farley after its use during Bernard’s service in the Airforce. As a former member of the Australian Airforce and member of the Warrnambool ex-service community, Bernard’s uniform has great social significance, telling a broader story of life after service.Dark navy blue broad waist sash which forms part of a dress uniform. Elasticised woven fabric in a rectangular shape fastened with two strips of velcro. A label is attached to the interior along the seam attaching the velcro. Label reads: “A.G.C.F../VIC. 1983/(broad arrow)/SIZE. 34/8440.S6.035.3816/NO./NAME”dress uniform, airforce, commonwealth government clothing factory, uniform, cummerbund, belt, sash -
Warrnambool RSL Sub Branch
RAAF Gaberdine Overcoat, Australian Government Clothing Factory (A.G.C.F.), 1976
This coat was issued to Airman Bernard Farley in 1976 as an initial issue of uniform. Bernard was enlisted in the Royal Australian Air Force in Warrnambool on 26th January 1976. This item is a Royal Australian Air Force uniform that was issued for the airman Bernard Farley. It has historic and social significance as an item of local military history. It is also in near perfect condition.RAAF Blue Gaberdine Greatcoat/Overcoat. Double Breasted. Belted at waist. Partly lined inside body; sleeves fully lined. Two vertical pocket openings at belt height give access to large inner pocket and to separate inner clothing. Double line of 5 Gold coloured plastic(?) buttons with Crown and Wingson on left and right front of coat. Single black plastic button on inside of coat immediately behind top left gold button. Epaulettes on shoulders are attached at outer end and have a small gold coloured button and button hole attachment at inner end; 'RAAF' sewn in lighter blue thread on outer end of each epaulette. Sleeves have 3 small gold buttons on cuffs.Attachment inside collar reads; A.G.C.F. (Australian Government Clothing Factory) Vic 1976. Broad Arrow Symbol. 8405.66.013.6603. Size 3L. No. NAME. Attachment inside lower left reads; handwritten, 17481, E746813, 3L,30560. 27.Blue Stamp - S broad arrow Nraaf, great coat, royal australian air force, r.a.a.f., air force, uniform, coat, bernard farley, farley, airman, warrnambool, warrnambool rsl -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN), Naval Ratings Collar
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. This collar is part of a Naval Ratings Uniform which was presumably owned by J.M. Parsons.This collar is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Navy cotton Collar with three narrow cream stripes around neck and over shoulders. Two side pieces and two loops. One middle piece. The collar fits over the head with side pieces and middle secured with tie fasteners through loops. Owners name printed three times in capitals on reverse side of collar "J.M.PARSONS"navy, naval ratings uniform, naval ratings collar, collar, ran, royal australian navy, j.m. parsons, j parsons, parsons, military uniform -
Warrnambool RSL Sub Branch
Hat, Hard Yakka, 2015
This hat is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) hat in Airforce colours of blue and grey in camouflage pattern. Broad brim hat with black plastic cord end fastener on a blue cotton cord. Plastic tag on interior of hat lining with printed inscriptions.Inscription on tag: “Hard Yakka/AUSTRALIA/AUGUST 2015/PO No: CC2XZ8/LAY No: 10609/SQNCOR FARLEY/(broad arrow)/[Mobile Phone Number]/NSN: 8415-66-161-4051/SIZE: M 56cm/NAME:” Inscription on reverse of tag: “PM KEYS No:/75% COTTON/25% POLYESTER/CARE INSTRUCTIONS/HAND WASH IN COLD/WATER WITH MILD/DETERGENT RISE/WELL DO NOT WRING/TUMBLE DRY OR/DRYCLEAN (X)/DRIP DRY IN SHADE”camouflage, airforce, uniform, general purpose uniform, australian defence force -
Warrnambool RSL Sub Branch
TUNIC - RAAF (Blue Grey) Service Dress Uniform Jacket, Military Uniform, 1998
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tunic (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary uniform. Service Dress is approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The Tunic consists of a jacket has a lapel collar, with two external chest pockets and exposed pocket flaps, two side jacket pockets with external flaps and two internal jacket pockets positioned just below the external chest pockets. There is a crescent shaped cloth badge 'AUSTRALIA' sown at the side/top of each sleeve and Squadron Leader - rank stripes sown around each sleeve on the upper wrist area. The Tunic is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. Maker: Australian Government Clothing Factory (A.G.C.F.) - Coburg Victoria The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service. -
Warrnambool RSL Sub Branch
Shirt, C 2015
This shirt is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) shirt in Airforce colours of blue and grey in camouflage pattern. Long sleeve with 6 buttons up the front, two chest pockets with zippered verticle openings along the button seam; two button down pockets on both the left and right shoulder with velcro patches sewn to outside flap for attachment of patches. Above the chest pockets are two patches with embroidered inscriptions in white thread on navy backing. Shirt cuffs have adjustable velcro fasteners.Inscription on interior label is worn and illegible, halfway down the tag reads “PM KEYS NO.” Throughout (on shoulder seams, above left pocket and on back of collar) is the Australian Airforce badge/motif which features a circle with the words ‘Royal Australian Air Force', the Imperial Crown, and a Wedge-Tailed Eagle in flight though this detail is inferred not physically visible. Two embroidered patches above the chest pockets read “AIR FORCE” and “FARLEY.”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
Trousers, Australian Defence Apparel, 2015
These trousers are part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) trousers in Airforce colours of blue and grey in camouflage pattern. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A193/ADA/MADE IN AUSTRALIA/JUL 2015/ PO: CC2X91/NSN: 8415 66 161 4017/SIZE: 95 R/(broad arrow)/NAME:............/PM KEYS NO:............./75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/DRYCLEANABLE (P)”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
Jumper, Calcoup Knitwear, C 2015
This jumper is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This woolen jumper was presumably a winter addition to the GPU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. Navy blue ribbed knitted jumper with stitched navy cotton elbow patches, rectangular in shape. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left shoulder carries an Airforce embroidered patch at the top of the arm. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of black fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “CALCOUP KNITWEAR/291083/ 06/01 / 8405/661468799 / SIZE: 115cm-125cm/SERVICE No........./ NAME........../MACHINE WASHABLE GENTLE CYCLE/Fasten shoulder straps before/washing. Warm machine wash,/inside out on medium cycle./Do not bleach./Warm rinse. Normal spin./Doi not tumble dry./Dry in shade. Warm iron./ Dry Cleanable A/80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
TIE - RAAF (Blue Grey) Service Dress Uniform Jacket, Military Uniform, unknown
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Austal -
Warrnambool RSL Sub Branch
Shirt
This shirt is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with 6 buttons up the front, two chest pockets with zippered verticle openings along the button seam; two button down pockets on both the left and right shoulder with velcro patches sewn to outside flap for attachment of patches. Above the chest pockets are two patches with embroidered inscriptions in black thread on disruptive pattern backing. Shirt cuffs have adjustable velcro fasteners.Interior label has been removed. Two embroidered patches above the chest pockets read “AIR FORCE” (left of wearer) and “FARLEY” (right of wearer). Oval patch on left shoulder shows a kangaroo silhouette encircled by a black embroidered circle.camouflage, uniform, australian defence force, disruptive pattern, airforce -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN), Berlei Ltd, Naval Ratings Shirt
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. This shirt is one of four parts to a Naval Ratings Uniform which was presumably owned by J.M. Parsons.This shirt is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.White cotton short sleeved shirt with blue trimming around a square neckline. There are two slits on either side of the base of the shirt with rounded edges. There is a label stitched in the top/centre of the interior back of the shirt.Owners name printed in capitals on the lower part of the back exterior fabric: "J.M.PARSONS"navy, naval ratings uniform, ran, royal australian navy, j.m. parsons, j parsons, parsons, military uniform, naval ratings shirt, shirt -
Warrnambool RSL Sub Branch
Trousers, Australian Defence Apparel, 2015
These trousers are part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern trousers in five colours of green and brown. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A13/ADA/VICTORIA 2008/(broad arrow)/SPECIFICATION ARMY (AUST)6542/NSN: 8415 66 152 1059/SIZE: 95 S/NAME/SERVICE NO/75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/MADE IN AUSTRALIA” The name “FARLEY” is also handwritten on the back interior waist band of the trousers. camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
JACKET - WORKING DRESS - RAAF (Blue Grey) Uniform Jacket, Military Uniform, 1990
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service. -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN), Naval Ratings Drill Trousers
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. These drill trousers are one of four parts to a Naval Ratings Uniform which was owned by J.M. Parsons.These trousers are one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Khaki long bell bottom trousers with seven quick release metallic buttons. Four of the buttons are lined up horizontally along the pelvis and another three fasten the trousers together in a liner pattern at the centre of the pelvis. There is a white square label sewn to the back/centre interior of the waistband with printed and written inscriptions. There is also a written inscription directly on the trouser fabric to the right of this label.Printed inscriptions on the label: KHAKI DRILL TROUSERS / FALL (indecipherable word) / Size: (indecipherable symbol) / Waist (indecipherable symbols) / INSIDE LOG: (indecipherable inscription) / H. R. (Indecipherable inscription) PTY LTD / indecipherable inscription Written inscription on label: JM PARSONS / (indecipherable inscription) 362 Written inscription on trouser fabric: J.M.PARSONS 14/362navy, naval ratings uniform, naval ratings collar, j.m. parsons, ran, royal australian navy, j parsons, parsons, military uniform, drill trousers, trousers -
Warrnambool RSL Sub Branch
Jumper, Elegant Knitting Co, 1993
This jumper is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This woolen jumper was presumably a winter addition to the DPCU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Khaki ribbed knitted jumper with stitched Disruptive Pattern cotton elbow patches, rectangular in shape running the length of the forearm. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left upper arm carries a rectangular Disruptive Pattern patch with a seam down the centre, creating two long narrow pockets. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of green fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “ELEGANT KNITTING CO./PENRITH, N.S.W. 1993/(047) 32 2491/8405-66-134-9381/SIZE 115cm-125cm XL (broad arrow)/SERVICE No........./NAME.........../“ Reverse of label carries a series of care instructions including “Fasten shoulder straps before/washing/ 80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
Hat
This hat is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern Combat Uniform hat in five colours of green and brown in camouflage pattern. Broad brim hat with black plastic cord end fastener on a beige/brown cotton cord. A band, sewn at 35mm intervals around the crown of the hat may have been used for attachments. Cotton tag on interior of hat lining with illegible inscriptions. Hat lining at front brow and on crown of head is a towel-like material, presumably for absorbing perspiration.The name “FARLEY” can be faintly seen handwritten on the hat on both the left and right interior.camouflage, uniform, general purpose uniform, airforce, australian defence force, disruptive pattern -
Warrnambool RSL Sub Branch
TROUSERS - RAAF (Blue Grey) Uniform, Military Uniform, 1988
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) trousers- Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory -
Warrnambool RSL Sub Branch
TROUSERS - RAAF (Blue Grey) Uniform, Military Uniform, 1995
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) trousers- Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Defence Industries -
Warrnambool RSL Sub Branch
TIE - RAAF (Blue Grey) Service Dress Uniform Jacket, Military Uniform, unknown
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: unknown -
Warrnambool RSL Sub Branch
Shirt (short sleeve) - RAAF (Blue Grey) Service Dress and Working Dress Uniform, Military Uniform, 1992
This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Service Dress Uniform - Shirt (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Australian Defence Industies -
Warrnambool RSL Sub Branch
Service Jacket; Army Nurses Uniform, Early 1940's
This uniform was worn by Sister Winifred Ride during World War 2.. Nurses played a key role in the conflict through their care and compassion to the servicemen who were wounded and sick.The nurses uniform is symbolic of the sacrifice and service of the many women who served their country in WW2. Grey fitted, lined jacket with long sleeves, collar and lapels. Three front metal buttons buttons and two smaller buttons on each sleeve. Dark green epaulette with four metal buttons on each shoulder (Right side is faded). Two hip pockets with one button fastener. One internal pocket with small grey button. Unit patches on each sleeve and four inverted service chevrons on right sleeve at wrist. Two ribbon bars containing 5 Campaign Ribbons on left side of front, attached with standard 'brooch' fitting . Belt (same material as jacket) passes through two loops on back of jacket and is fastened by two buttons, hidden when belt is fastened. Metal buttons stamped with map of Australia with crown above and the words Australian Military Forces around. Makers label inside back below collar: " /tailors and habit makers, J .RAVENSDALE & SON Nicholas Bldg Swanston Street Melbourne". Name of owner handwritten "Sister Ride:" -
Warrnambool RSL Sub Branch
Kit bag, 1940s
This kit bag belonged to Keith Litchfield Arnel. Born in Kensington on 23 August 1910, and enlisting in Melbourne at the age of 33 on 14 July 1944, Keith Arnel served in the Royal Australian Air Force. At the time of his discharge, Keith Arnel had become a Flying Officer with the Air Force Headquarters Telecommunications Unit. Keith Arnel had two service numbers, VX68230 and 129880.Blue-grey kit bag, cylindrical in shape, constructed of one circlular piece at base with rectangular piece forming sides. Open at one end and fastened with a cream cord drawstring threaded through metal eyelets and fastened with a brass D shaped ring threaded through two eyelets. Inscriptions in cream-white paint on side of bag. One D ring attached to the circular base, possibly for the purpose of attaching a strap to form a duffle bag.Inscribed on side of bag “K.L.ARNEL/R.A.A.F./129880”kit bag, duffle, luggage -
Warrnambool RSL Sub Branch
Peaked Hat - RAAF (Blue Grey) Uniform, Military Uniform, Estimated early 1970's
Issued to Aircraftsman Bernard Farley in 1976 as part of his initial issue of uniform on joining the Permanent Air ForceThis item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Peaked Hat - Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory