Pin given to, and worn by, student nurse members of the Royal Australian Nursing Federation (R.A.N.F.). This badge is likely from a period when nursing education was moving from hospital-based training to tertiary settings. A 2013 report from the Federal Department of Health provides this following overview of nursing education: "during the mid-1980s, nursing education commenced a period of change from being hospital-based to being conducted in tertiary settings, with practical clinical experience components. By 1993, all registered nursing students in Australia were entering the profession via the university education pathway". The Royal Australian Nursing Federation (RANF) became the Australian Nursing Federation in 1989, suggesting that this button is from the 1980s.Oval-shaped green, red and gold pin. pin printed with 'R.A.N.F.' [Royal Australian Nursing Federation], 'STUDENT NURSE UNIT', and the acronym 'SNU' in the shape of Australia.nursing, nurses, students, education, badges, pins, nursing history, royal australian nursing federation

Used in the 19th century.A long bladed forged steel adze head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the late 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Unknown use but probably removed from use due to damage to the part.A pair of circular iron lids concave in shape with three handle like appendages with square holes and a handle on top. The base on the second is thicker and therefore it is a heavier lid

These ivory sticks were used as decorative items to secure hair buns. They were owned by Alice Dinsmore nee Reardon who was born in 1860 in Castlemaine, Victoria and died 18 May 1936 in Albury, New South Wales. She married George Wesley Wadeson Dinsmore. Alice and George Dinsmore were grandparents of Mrs Jean Raper who donated these sticks and many assorted items of jewellery to the Wodonga & District Historical Society.This item is from the Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper.2 small ivory sticks used for hair decorations. One has a brass cap on one end. The other stick has a notched shape on one end.fashion accessory, hair decorations, women's fashion

What was distinct about the Performing Arts Course at the University of Ballarat is it had students from a wide range of back grounds with an age range from 17 to 53 years. Students are keen to not only act but to write, design, direct, production manage, stage manage, design lighting and sound and create their own theatre. They also take responsibility for a large percentage of the decision making and administration. Artistic Director and Course Co-ordinator was Peter Tulloch. "The Wizard" is the first of a program of theatre works for this year. Programme includes an outline of the story, list of the cast, musical numbers, production staff and the list of school children playing M unchkins. They are divided into two groups. Band members are listed. Four A3 sheets of glossy paper folded in half to make sixteen pages. Front cover with rainbow and black shapes of Witch, Dorothy, Tinman and Lion. PhotographsSymbols of sponsorsperforming arts, write, design, direct, production manage, stage manage, lighting and sound, training, acting credits, skills, peter tulloch, director and co-ordinator, directing, the wizard of oz, melissa casey, amanda sandwith, sam ritzkoff, matthew lotherington, david mashiko, renee wilner, paul fitzpatrick, john bolger, wookie and muff - dogs, andrew arney, andrew lane, james mclaverty, jeff parker, annie kerr, kylie lockwood, liesl morris, narrell werner, jamie robertson, grant hickey, angela coad, michael mcliver, tim blundell, ruth butler, kathy lucas, rashelle mchugh, anthony wallace, natalie zappulla, laura hill, linda judd, kruse collection

Five coins in various shapes and sizes. Bronze in colour Two Vietnamese Dong One Schilling Republic of Osterreich One five cent Indochine. 1 RAEcurrency, rae

Matching wooden butter pats. Flat, rectangular-shaped, grooved on one side. Wooden paddles used to work/shape butter after it had been churned.butter pats

These brooches were made by Hans Beck, a German Templer who was born and lived in Palestine. When WWII broke out, he was sent to Australia on the "Queen Elizabeth" in 1941 and interned in Tatura Camp 3. His wife and children were left behind in Palestine. His daughter Ingrid said that although they were behind barbed wire, they were safe. Hans worked as a manufacturing jeweler in Sydney after his release from Internment. He sent for his family on 1947. A 1 x wooden triangular shape with a small four petal flower made of tiny white shells. A metal stick pin is attached to the back. B 1 x wooden heart shape. Two flowers on stems made from small pink shells. Each flower has five petals. A group of four tiny white shells sit between the flowers. A vase is carved into the bottom of the heart. A small safety pin in attached to the back. C 1 x wooden oval shape. Group of three pink shell flowers on green stems. Two flowers have six petals and a centre made from shells. The centre flower has only one petal. A bow of tiny white shells at the base of the brooch. Small safety pin attached to back. D 1 x wooden round shape. A cluster of shells in a floral pattern. A small bright red shell in the centre of cluster. Pin on the back is broken. E&F 2 x wooden round shape. A cluster of small shells in a floral pattern. One dark wood, one lighter coloured wood. handmade, brooch, shell, beck, queen elizabeth, templer

The pins in this collection vary in the timber used and the design. They were found in a warehouse beside Crown Casino in Melbourne, located along the Yarra River, close to the sailing ship "Polly Woodside" and not far from the docks of Port Melbourne. Some of the pins have the mark of a 'Broad Arrow' with 'D ↑ D, which signifies that they were the property of the Australian Government's Department of Defence. Belaying pins are essential equipment on a traditional sailing ship of the 19th and early 20th centuries. They are usually made of wood but some are metal. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries. They are also significant for their association with the Port of Melbourne where sailing ships docked to and from the Port of Melbourne. Some of the pins have additional significance for being connected with the Australian Government's Department of Defence.Belaying pin, wooden, simple design, wooden shaft with a wider rounded end on top third, tapering to the centre third, which is wider than a lower third. The bottom has a blunt base. Some of the pins have the three sections divided by a line around their circumferences. This collection of fifty-seven pins of varying shapes, colours and timber. Some of the pins are stained with colour, and some have been left natural Stored in a wooden crate. Some have inscriptions.Marks: (Government Defence Department Broad Arrow) "D ↑ D"sailiing equipment, nautical equipment, rigging, yards, flagstaff hill, maritime museum, maritime village, belaying pin, broad arrow, australian government, australian department of defence, sailing ship, sail

This small Braille teaching cube attached to a keyring can be used to make the shapes of Braille characters. The surface of cube is studded with large black rivets and when the three main parts of it are rotated, the shapes of a single braille character can be seen and felt. The cube features raised dots in 3 independently revolving sections. These can be turned to form different Braille letters for teaching purposes. 1 bright yellow Braille keyring cube with black dots on itbraille equipment, education aids and devices

Silver War Badge (WW1) No. A.35027 belonging to "Herbert Charles Nott" No. 228. See also Cat No.S 7816.4 for H.C. Nott's service record. Part of the Cooper Collection.1. Circular metal badge with the words "For King and Empire" and "Services Rendered" around the rim. Voided cypher and Kings Crown (George V) in the centre. Reverse has a hinged vertical pin. Badge contained in dark grey coloured cardboard box. 2. Base of grey coloured box. Number of badge on white paper attached. Square in shape. 3. Lid of grey coloured box. Square in shape.1. Engraved on reverse side of badge 'A.35027'. 2. Printed in black ink on white paper on base: 'A35027'.herbert charles nott, cooper collection, badge, services rendered, ww1

These scales come from the Nullawarre Post Office. Nullawarre is a small settlement 25 kilometres south east of Warrnambool. The area was settled in the late 1860s and 1870s and the first school was opened in 1878. The main agricultural pursuit in the Nullawarre district is dairying. The Nullawarre Post Office still operates in the General Store building. This set of scales is of interest as it is a memento of the equipment used in country Post Offices one hundred years ago or more. Scales such as these may still be in use but electronically-operated scales are more likely to be used today.This is a set of metal weighing scales with two trays, one oval in shape and one round, on a balancing mechanism. This mechanism has two ornamental upright metal pieces. The scales are affixed to a wooden base in a rectangular shape with the front edge shaped into two curves. The wooden base has three slots for holding the weights. There are six brass weights with this item. The metal is a little tarnished and the wooden base is stained. nullawarre, history of warrnambool

This item is a bronze German MotherCross. The MotherCross was given to German mothers of pure Aryan heritage before and during World War Two. Adolf Hitler wanted to encourage population growth and keep the German mother at home. Mothers were awarded these crosses according to the number of children they had – gold crosses for eight or more children, silver for six or seven children and bronze for four or five children. The crosses were presented to mothers on 4th August, the birthday of Hitler’s mother and also on Mother’s Day. They could only be worn on special occasions around the neck on a blue cord with two white stripes. This German MotherCross is a bronze one and has on one side ‘Der Deutschen Mutter’ and on the other side ‘16 Dezember 1938’ and Adolf Hitler’s signature. The date indicates when the award was first instituted. There were at least 8 million recipients of the medal.The recipient and donor of this medal are not known but it is a very interesting and unusual memento of World War Two.This is a metal medal in the shape of a cross with a bronze ridged background in the shape of a rectangle. The cross is enamelled in blue and white and has a round bronze disc in the centre and lettering with a blue swastika on a white background. There is lettering on the back of the cross. A metal catch is attached to the top of the cross and remnants of a blue and white cloth cord are looped over the catch. One small fragment of the cord is detached. The medal is in a box which is not the original container. ‘Der Deutschen Mutter’ ‘16 Dezember 1938’ plus Adolf Hitler’s signature world war two, german mothercross

These badges were issued to a member of the Warrnambool Racing Club for the season1957-1958 and includes a male member’s badge and the lady’s badge issued to him. Horse race meetings have been held in Warrnambool since the early days of settlement (late 1840s) and the Warrnambool Racing Club was formed in 1854. Races were first held at the current site of the Warrnambool Racecourse in the late 1850s. Today the chief event of the Warrnambool racing calendar is the May Racing Carnival, held over three days and featuring the well-known Warrnambool Grand Annual Steeplechase.These badges are retained as examples of Warrnambool Racing Club members and ladies badges of the late 1950s..1 A metal badge, four sided, in an irregular shape. The outer rim has gold edging and there is an image in green, red and white of a horse and rider clearing a hurdle. The gold lettering has a white background. At the top of the badge is a metal ring with a brown cord with a metal fastener attached. .2 A gold-coloured badge in the shape of a triangle with gold lettering. This is attached to the brown cord of badge .1 above. .1 Warrnambool Racing Club. Not Transferable. Season 1957-58. 161. Stokes .2 W.R.C. Lady. Season 1957-58. 161. Stokes warrnambool racing club, history of warrnambool, badge

Items in the collection re MAX Jolliffee, refer Cat No 4322.3 for service details..1) Badge metal square shape blue with gold trim and text, one pin on rear. .2) Badge metal silver colour black background crown at top, centre has the letters "CMF". .3) Badge metal centre oval shape, colours gold, black, two blues, crown at top, centre figure boomerang at bottom, one pin on rear. .4) Badge, miniature of .3).1) "National Servicemens Association 51 - 72 Navy Army Airforce". .3) .4) Royal Australian Signals Association".badges, association, cmf

Letters both from Alfred G Ferris AIF to his Mother in Terrick Terrick. Refer cat No 4183.3P for his service details..1), Envelope, yellowish colour, rectangular shape, green and red PO stamps, stamped “Glasgow 5 Aug 1918”, hand addressed in black pen. .2) Brown coloured pressed plant .3) Envelope, rectangular shape, greenish colour, Field PO stamp, passed by censor stamp, hand addressed in purple. .4) letter, “YMCA” letterhead, blue colours, ruled lines, dated..4) dated, “FRANCE 10th Sept 1918, Dear Father”.letters, envelopes, pressed plants,

These items are from the Temple estate. George Temple (1832-1916) started Temple's store opposite Orbost Post Office. Packed stores to Bendoc area gold fields, also had a store in Cann River. This item is an example of a popular piece of jewelry worn by women in the early 20th century. These brooches were sold in a local store and could have been purchased for a local funeral.Black, bakelite brooch - three small sections form centre of brooch, one is a hexagonal cone-shape with hexagonal dome attached by link to smaller circular polygon attached by link to a smaller flat pentagon. Black mesh in the shape of wings form the backing featuring eight bakelite stars of varying sizes (two smaller stars missing from the assembly). A metal pin is attached to the rear in the form of a clasp.1900s jewellery, bakelite, mourning brooch, george temple, orbost store

Object. Woven palm - frond handle and 'spine'. Strips of palm-frond have then been split from the fronds, and woven in a 'basket' effect, with slightly wider - 1 cm, at the base of the fan shape, tapering to .5 cm at the top. Lower section at the centre. A second 5 cm straight shape section steps up to a top peak, 4 cm high. Some pattern is visible, in a darker colour.costume accessories, female, palm -frond diamond shaped fan

The maker of this cruet set is unknown. It is a high quality household item and would have been a common item in households of the more affluent homes in the 19th and early 20th centuries. Cruet sets are not used much these days but have usually been replaced by salt and pepper shakers without a stand. This cruet set has no known local provenance but is retained as an example of a household item of the past. It will be useful for display This cruet set consists of a stand, a container for mustard and two containers for salt and pepper. The stand is silver-plated and has a rectangular base with pointed edges and three slots for the containers, one rectangular and the other two square in shape. The handle is riveted to the base with two screws which are now rusty. The base of the stand also has six studs. The silver plating is tarnished in places. The salt and pepper containers are made of cut glass in rectangular shapes and have silver-plated circular-shaped lids. The top of one of the lids has broken loose from the lid. The mustard container is made of cut glass and is rectangular in shape. The silver plating on the lids is wearing away. history of warrnambool, 19th century household items, cruet set

The first sculpture awarded the Shire of Eltham 'Art in Public Places' Award/Commission. The Judges were Inge King, Jenny Zimmer and Daryl Jackson. The work deals with the juxtaposition of suburban and rural surroundings. This scupture is a typical example of the artist's oevre of the period. This sculptre is site specific and refers to the nature of the environment. The colour - bushfire red / sienna - alludes to the history of fire in the urban/rural fringe and the title, as well as the sculpture's shapes, forms and material refer to the natural and local elements. Judges report noted: "The most vital and expressive work for the site...with a great sense of dynamic movement and vibrant colour. Its' abstract forms will enliven the surroundings and the urban and natural environment. This work is the most appropriate for the site and expressive of the dynamics of an evolving community in which artistic discourse and debate has always thrived." The work has acquired the status of a major landmark from the National Trust. The Breeze is an abstract work made out of welded steel and painted in enamel in bush fire red / sienna. It comprises a series of flat, cut-out shapes, interlocking at different angles, giving the impression of being hinged together rather than fixed. The work references nature and the built environment. Its geometric shapes suggest man-made structures within industry and suburban life, while rural areas can be identified by the organic flame-like shapes fanned by the wind. The circular cut-out in the eye mimics the sun, symbolising the intense heat of the Australian climate, while the colour red alludes to the history of bushfire within the urban and rural fringe. N/Apublic art, ginger, red, sienna, elements, steel, abstract, breeze, fire, sculpture

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

Take part in LaTrobe University's next phase of testing and help shape the future of transport in Victoria wit a ride in a driverless bus.News article 1 page, black text and colour image .latrobe university, driverless bus

Food covers were used to cover food and protect it from insects. This food cover is a simple shape and would be a domestic utensil.This food cover is an example of a simple kitchen item used in the late 19th-mid 20th century.Small black metal meat cover with small handle.food-storage domestic kitchen

Badge of Tilly Aston replicated from a photograph of her during her teenager/early adulthood. Rectangle in shape with a bronze background. 1 plastic badge with image of Tilly Astonassociation for the blind, badges, tilly aston

This spoon, made by William Page & Co., is electroplated nickel-silver and was recovered during the late 1960s to early 1970s from an unnamed shipwreck along the coast of Victoria. The shipwrecks in the area range from around the 1840s to the early 1930s. The spoon is part of the John Chance Collection. This spoon is likely to have been recovered be from the wreck of the Loch Ard (1873-1878) as other cutlery in the Flagstaff Hill’s Shipwreck Collection made by William Page was also recovered from the Loch Ard. The ship’s Manifest included a large quantity of cutlery. Also, other objects in the John Chance Collection were also recovered from wreck of the Loch Ard. In the mid-1800s electroplated cutlery became a popular substitute for the traditional but more costly sterling silver pieces. The ‘new’ cutlery was made from a more common base metal, such as nickel or a nickel alloy, then electroplated (coated) with a very thin layer of silver. The eating utensils looked like the expensive, pure silver version but eventually, through use and wear, the base metal would show. Some producers warranted their electroplated silver to be ‘white throughout’. WILLIAM PAGE & CO., BIRMINGHAM, ENGLAND - Although the electroplated cutlery of William Page & Co. was made in Birmingham, it does not include the embossed Birmingham Assay’s mark of an ‘anchor’ because the metal used for the spoons is not silver. William Page used various Maker’s Marks on his cutlery. The pattern of five embossed marks on this spoon is a typical example, with the embossed sunken crown containing ‘W P’ being the first in the column of symbols. - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamond William Page established his business in 1834, according to the text around a printed Trademark. The firm William Page & Co. began electroplating in 1855, and from 1880 it operated from Cranemore Street, Cattle’s Grove and also at 55 Albion St, Birmingham. The firm registered a new Trademark [‘W P’ within a diamond boarder within a sunken diamond] in 1897; previously the Mark were the initials WP within a crown, but the British legislation prohibited the use of a ‘crown’ mark on electroplated ware in 1895. In 1936 the firm became William Page & Co. Ltd and became a supplier of spoons to the British Government in 1938, marking its products with the ‘broad arrow’ symbol. The firm also traded with the brand names Armour, Asrista, Bolivian Silver, Roman Silver, Roumanian Silver, Silverite and Trevor Plate. Although this spoon is not linked to a particular shipwreck, it is very likely to have come from the wreck of the Loch Ard; the ship’s Manifest includes a large quantity of cutlery. Regardless, it is recognised as being historically significant as an example of cutlery carried onboard a ship as either personal belongings or cargo and brought into Colonial Victoria in the 19th to early 20th century; through this we have added opportunity to interpret Victoria’s social and historical themes of those times. The spoon also has significance for its connection with many similar William Page pieces of cutlery in our collection that were recovered from the wreck of the sailing ship Loch Ard (1873-1878). William Page & Co. of Birmingham is one of the renowned 19th century manufacturers and electroplaters and was supplier of spoons to the British Government in 1938. The spoon has added significance, as it was recovered by John Chance, a diver of wrecks, including the Loch Ard, in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Spoon; teaspoon, electroplate nickel-silver, discoloured to green and red-brown in places. Fiddle design. Bowl has indents and holes. Five embossed Maker’s Marks on back of handle, arranged in a column from tip towards bowl. Made by William Page and Co., Birmingham. The spoon no longer has its silver plating. The surface has encrustations. Bowl has nicks, indents and holes. Stem is very bent at the shoulder. Discoloured to green and red-brown in places. Embossed Maker Marks - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamondflagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, loch ard, cutlery, flatware, silverware, tableware, eating utensils, dining, spoon, electroplated cutlery, william page & co, william page & co. ltd., birmingham plate, silversmith, antique, vintage, fiddle design, fiddle pattern, teaspoon

This spoon, made by William Page & Co., is electroplated nickel-silver and was recovered during the late 1960s to early 1970s from an unnamed shipwreck along the coast of Victoria. The shipwrecks in the area range from around the 1840s to the early 1930s. The spoon is part of the John Chance Collection. This spoon is likely to have been recovered be from the wreck of the Loch Ard (1873-1878) as other cutlery in the Flagstaff Hill’s Shipwreck Collection made by William Page was also recovered from the Loch Ard. The ship’s Manifest included a large quantity of cutlery. Also, other objects in the John Chance Collection were also recovered from wreck of the Loch Ard. In the mid-1800s electroplated cutlery became a popular substitute for the traditional but more costly sterling silver pieces. The ‘new’ cutlery was made from a more common base metal, such as nickel or a nickel alloy, then electroplated (coated) with a very thin layer of silver. The eating utensils looked like the expensive, pure silver version but eventually, through use and wear, the base metal would show. Some producers warranted their electroplated silver to be ‘white throughout’. WILLIAM PAGE & CO., BIRMINGHAM, ENGLAND - Although the electroplated cutlery of William Page & Co. was made in Birmingham, it does not include the embossed Birmingham Assay’s mark of an ‘anchor’ because the metal used for the spoons is not silver. William Page used various Maker’s Marks on his cutlery. The pattern of five embossed marks on this spoon is a typical example, with the embossed sunken crown containing ‘W P’ being the first in the column of symbols. - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamond William Page established his business in 1834, according to the text around a printed Trademark. The firm William Page & Co. began electroplating in 1855, and from 1880 it operated from Cranemore Street, Cattle’s Grove and also at 55 Albion St, Birmingham. The firm registered a new Trademark [‘W P’ within a diamond boarder within a sunken diamond] in 1897; previously the Mark were the initials WP within a crown, but the British legislation prohibited the use of a ‘crown’ mark on electroplated ware in 1895. In 1936 the firm became William Page & Co. Ltd and became a supplier of spoons to the British Government in 1938, marking its products with the ‘broad arrow’ symbol. The firm also traded with the brand names Armour, Asrista, Bolivian Silver, Roman Silver, Roumanian Silver, Silverite and Trevor Plate. Although this spoon is not linked to a particular shipwreck, it is very likely to have come from the wreck of the Loch Ard; the ship’s Manifest includes a large quantity of cutlery. Regardless, it is recognised as being historically significant as an example of cutlery carried onboard a ship as either personal belongings or cargo and brought into Colonial Victoria in the 19th to early 20th century; through this we have added opportunity to interpret Victoria’s social and historical themes of those times. The spoon also has significance for its connection with many similar William Page pieces of cutlery in our collection that were recovered from the wreck of the sailing ship Loch Ard (1873-1878). William Page & Co. of Birmingham is one of the renowned 19th century manufacturers and electroplaters and was supplier of spoons to the British Government in 1938. The spoon has added significance, as it was recovered by John Chance, a diver of wrecks, including the Loch Ard, in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Spoon; teaspoon, electroplate nickel-silver, silver discoloured to brown. Fiddle design. Five embossed Hallmarks. Five embossed Maker’s Marks on back of handle, arranged in a column from tip towards bowl. Made by William Page and Co., Birmingham. The spoon no longer has its silver plating. Bowl has a cut in the side, and is nicked and dented. Embossed Maker Marks - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamondflagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, loch ard, cutlery, flatware, silverware, tableware, eating utensils, dining, spoon, electroplated cutlery, william page & co, william page & co. ltd., birmingham plate, silversmith, antique, vintage, fiddle design, fiddle pattern, teaspoon

Carving of a small female head made by a patient of Mayday Hills Asylum. A grid has been drawn across the top with Romanian letters written within the cells.Mayday Hills Asylum was one of the three largest psychiatric hospitals in Victoria, and played an important role in the treatment of mental health illnesses from its establishment in 1867 to its closure in 1995. As part of prescribed treatment, many patients participated in craft activities were they were able to create an array of objects. A limb of a tree roughly carved into the shape of a woman's face, featuring a thick hair style, slanted eyes, delicate mouth, and long neck. Pen notations on top of sculpture.beechworth, burke museum, mayday hills asylum, sculpture, wood carving

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This candle-holder is an example of an item commonly used before electricity was connected to the area.The candleholder is a hollowed round,saucer-shape with a ring finger-grip on the side. It has been enamelled but the original blue paint has worn off and it is very chipped and rusted.candlestick-holder lighting

A shield shape with a wooden base with 8 shield shaped plaques for recording of winner. Gold coloured design in the centre with a picture of a stopwatch and a running shoe inside a laurel wreath1992 Mullauna Secondary College (SC), Mitcham Campus 1993 Ringwood Secondary College 1994 Ringwood Secondary Collegetrophy, 1994, fun run, festival fun run, perpetual school trophy, ringwood festival fun run perpetual school trophy, mullauna, 1992, 1993, school trophy, run