Showing 3402 items
matching two handed
-
Bendigo Historical Society Inc.
Photograph - HARRY BIGGS COLLECTION: ELLMSWOOD, Circa 1890
A copy of a photograph of a farmhouse with farm building in the background. Surrounding the house is a picket fence, in the foreground are three adults and five children. One of the women is holding a child and the other is holding a child by the hand. There is a man with a beard and wearing a Bowler hat standing between the two women. There are three other children; two boys on tricycles, and a girl standing between them. Written at the base of the photo is First Home, Ellmswood, Serpentine 1890topic, farming, farm house, serpentine , ellmswood -
Bendigo Historical Society Inc.
Photograph - HARRY BIGGS COLLECTION: SERPENTINE
2 copies. Photo of a very large tree laying on the ground. There is a gentleman sitting on the base of the tree, beside him are four seated young women, between them there is a man standing on the trunk with hands on hips. At the other end of the trunk there are two men leaning on the trunk, one with a walking stick. The men are all wearing Bowler hats, the women are all in dark clothing and also hats. Written at the base of the photo is ' 200 posts Ellmswood, Serpentineplace, land, timber, serpentine, ellmswood -
Bendigo Historical Society Inc.
Photograph - COHN BROTHERS COLLECTION: ROBINVALE HOTEL, 1920's ?
Sepia tone photograph of a two storey building, there are water tanks at both ends. On the left hand side of the centre portion of the building there is a flat top verandah consisting of 3 archways along the front and one at each end. There is a sign above the archways reading 'Robinvale hotel'. On the right of the Centre there is a much smaller structure consisting of 1 archway at the front and 1 on the right hand side, above the front archway there is a sign reading 'Bar'. In front of the Hotel on the left hand side there is a 1920's vintage car parkedbuildings, hotel, robinvale, cohn brothers , robinvale hotel -
NMIT (Northern Melbourne Institute of TAFE)
Photograph: CTS Soccer Team 1928, Photograph of Collingwood Technical School Soccer Team 1928 with trophy cup
Photograph, unframed, of Collingwood Technical School Soccer Team 1928 with trophy cup.On the soccer ball in the photograph '1928 / CTS'. On reverse of photograph, two arrows at top and beneath the right hand arrow 'MR. A.S.WODDARD'.collingwood technical school, soccer team 1928, students, classes, nmit, -
NMIT (Northern Melbourne Institute of TAFE)
Photograph - CTS 1938-1940 student, Collingwood Technical School. Unemployed Adults Training Scheme, 1938-1940
Collingwood Technical School trained apprentices in many trades. In the late 1930s, CTS was involved in ttraining schemes for youth and adults.This photograph depicts two men learning to operate a lathe. This is a high quality professional photograph taken circa 1940. In 1938-1940, CTS was part of the Unemployed Adult Training scheme. This photograph is a visual record of this scheme.1 black and white photograph mounted on brown card. Photograph depicts trainees working with a 5" centre lathe.Photograph has a hand written caption on the back: 'Collingwood Technical School./ Unemployed Adults Training Scheme, 1938-1940./ Trainees planing the cast iron bed of a/ 5" centre lathe. 'collingwood technical school, cts, apprentices, students, unemplyed adult training scheme, lathes, machinery, machine parts, nmit -
NMIT (Northern Melbourne Institute of TAFE)
Photographs - CTS 1940-1943, Collingwood Technical School. Defence Training Scheme, 1940-1943
Collingwood Technical School trained apprentices in many trades. CTS was also invlved in Training Schemes during the late 1930s and during World War II. These photographs depict some of the machines and machine parts built in class. These are high quality professional photographs taken circa 1940-1943. At this time , CTS was part of the Defence Training scheme. These photographs are a visual record of this scheme.6 black and white photographs mounted on brown card. Photographs depict various aspects of lathe work undertaken during the Defence Training Scheme, 1940-43. Also a smaller photograph of a Moultar Thread Milling Machine 1941.Each photograph has a hand written caption on the back. Captions: 1. Finished surface plates for R.A.A.F. / standing on trestle after scraping. Stack of / others in background waiting for scraping. 2. Lathe bodies in foreground, with machined / parts of lathes in middle distance, and milling / cutters, gauges and bearings in background. 3. Frames of glass splitting machines, thread / rectifying machines, and two types of milling / machine vises made in technical schools. 4.View of engineering machine shop. Carbon dioxide / freezing box in foreground, and stack of / surface plates for RAAF in middle / distance. 5.Fan geared lathes, 6 inch centres, with / self-contained motor drives, made for / cartridge factory. To be used for making / this 6.Freezing of cast iron surface plates / in layers of solid carbon dioxide / blocks. Smaller photograph has a handwritten note on the reverse: 'this photograph shows how, with the aid of a 3ft. extension mounted in front of the tool box, on which Mr. Grubb sen. is seated, these large milling machine bases ... machinists at Collingwood Technical School. A Strang, Principal 21.4.1941'. collingwood technical school, cts, apprentices, students, defence training scheme, lathes, machinery, machine parts, nmit, -
NMIT (Northern Melbourne Institute of TAFE)
Book - NMCOT, School; and, Lan is Sick: edited by Miriam Faine for the Migrant Women's Language Centre, NMCOT, Circa 1990s
Two small books written or edited by Miriam Faine and illustrated by David Pearson. Produced by Migrant Women's Language Centre, NMCOT, with support from Victorian International Literacy Year Secretariat. The book "School" relates the experiences of four women from various cultures.2 books, 12 and 16 pages. Hand drawn illustartions.Both books are stamped withNMCOT Library Network stamps.english as a second language, literacy, migrant women's language centre, nmcot, nmit, -
Bendigo Historical Society Inc.
Document - KELLY AND ALLSOP COLLECTION: LETTER FROM KELLY TO SAMUEL CARR, 02/05/1897
Document.KELLY & ALLSOP COLLECTION. Carbon copy of a letter written by ? Kelly to Samuel Carr, Kalgoorlie, dated 2 May 1897. Two pages 745 and 746 of a carbon copy book. Hand writing is faint and hard to decipher. In part it relates to the estate of Carr's late father. First part of signature at bottom not decipherable, but the rest looks like Kelly.? Kellybusiness, stockbroker, kelly & allsop, kelly & allsop collection, samuel carr, letter, kelly -
Bendigo Historical Society Inc.
Document - CORNISH COLLECTION: THOMAS EDWARDS AND METALLURGICAL WORKS
Document. Cornish Collection - Thomas Edwards. Two pages from Bendigo and Vicinity's (badly copied with Left Hand side of page not being fully legible in page 247). Biographical details. Reference to his Pyrites Works (in Bendigo and Ballarat) - details of these works. Photo of Thomas Edwards accompanies one page and separate copy of photo shows Edward's Metallurgical Works, West Bendigo (source? / - this photo has typewritten attachment detailing location in Inglewood Road; mention of Spargo's (another Cornish owned operation of this nature).bendigo, gold mining, metallurgical works, thomas edwards. edwards metalurgical works. -
Bendigo Historical Society Inc.
Document - BENDIGO COUNCIL - AFFIRMATION OF ALLEGIANCE TO KING AND THRONE
Document with Bendigo Seal - It reads - May it please your Royal Highness. We, The Mayor,Councillors and Citizens of Bendigo desire to express our continued and devoted loyalty to the Throne and Person of His Majesty King George V., your Royal Sire and her Her Majesty Queen Mary. The visit of your Royal Highness to the Southern portions of His Majesty's Dominions is hailed with delight in as much as it evinces the length and continuance of the recognition of Australia's Royalty to the British Throne. In the year 1881 your Royal Father visited our shores as Prince George of Wales and again in 1901 as the Duke of Cornwall and York, two most memorable occasions in Australia's History. We now desire to assure Your Royal Highness that your visit will also remain in our minds as one of the most pleasant of all memories. Given under the Seal of the Corporation of Bendigo. Written on the bottom in own hand writing. 'To my friend Mr. Maher, with compliments From the illuminator.'civic mementoes, royal souvenirs, king and throne., bendigo council. affirmation of allegiance to king and throne. -
Bendigo Historical Society Inc.
Photograph - BENDIGO - ST.ANDREWS PRESBYTERIAN CHURCH
Photograph - black and white. Photo of St.Andrews Presbyterian Church, Bendigo. Written on left hand corner of photo No.17. large tree on left edge. Two well pruned treeson footpath. Two storey mansion to the right of the church.buildings, church, st.andrews presbyterian., st. andrews presbyterian church, bendigo. -
Victorian Interpretive Projects Inc.
photograph, Opening of the bew building at Stratford Railway Station, Victoria, c1921, c1921
Stratford railway station is located on the Bairnsdale line in Victoria, Australia. The railway lined opened on 8 November 1887 it served the town of Stratford. The building at the Stratford Railway Station was opened around 1921 after the original building was destroyed by fire on 10 January 1920. "STRATFORD RAILWAY STATION. Mr. M'Lachlan, M.L.A., has received the following from Mr. Norman, late Chairman of the Railway Commissioners:-"In reply to yours, I beg to state that material for the new Stratford railway station has been ordered, and the work will be put in hand as soon as it has been delivered. It is not an easy matter at the present time to obtain materials, and I cannot say exactly when those required will be received." (Gippsland Times, 27 September 1920) Until their demolition, Munro, Fernbank, Lindenow and Hillside stations were located between Stratford and Bairnsdale stations. (wikipedia)Photograph of two postcards showing a crowd at Stratford Railway Station to celebrate the opening of the new building. stratford, stratford railway station, railway -
Stratford and District Historical Society
Model Steam Engine
This working-model steam engine was hand-made c.1893 by Frank Scott of Mewburn Park, and used to drive a pump. The entire engine and base were repaired, cleaned and restored by participants in a LEAP program hosted by Eastern Victorian Group Training, Bairnsdale, in June 1995. This included repairing a broken piston arm.This small steam engine has two wheels attached to shafts connected to a single piston. It has a horizontal double-acting three inch bore with a four and half inch stroke fitted with Stephensons link reversing gear. It is mounted on a green-coloured wooden box.engines -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Pelvimeter,Skutsch's
Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.Skutsch's's pelvimeter,external and internal, pewter with two flexible arms to attach to the pelvimeter. t, one rigid arm is missing. Refer to Down Bros. catalogue 938/4, page 938. Manufacturer's stamp "HATRICK" on arm.pelvimetry -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Slide projector, hand held, 1970s
Belonged to Dr Geoff Bishop, used with patientsOmni Health Communicator reader with two slide cassettes [420.2, 420.3] titled "Diaphragm Insertion" and "Breast Self Exam", used in the 1970s, Dr Geoff Bishops 's rooms.teaching aid -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Pelvimeter, French model
Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-45 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer's stamp or initials of owner "M.S."pelvimetry -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Pelvimeter, French model
Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-45 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer unknown.pelvimetry -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Pelvimeter, French model
Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-50 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer unknown.pelvimetry -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Cotton bandages associated with midwife Mary Howlett, c. 1866 - 1920
Cotton bandages were one of two types of bandage in use during this period. The other type was gauze. These bandages appear to have been made professionally. The two narrow bandages, (3 and 3.5cm) would have been used to cover hand and finger dressings. The two larger bandages (4 and 5cm) would have been used for arm and foot dressings and applied in a figure of eight. [Helen Johnson, 1998]Four cotton bandages (.1 - .4) in four different sizes (widths). midwifery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Apron used by midwife Mary Howlett, c. 1866 - 1920
Apron belonged to and was used by midwife Mary Howlett. Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993.Hand made white linen apron. Consists of a small bib at front, with two long shoulder straps attached to a long gored skirt. Shoulder straps have three mother of pearl buttons, and there are four buttonholes at the back of the waistband of the skirt. The skirt is divided into three gores and has a darted waist. On the right side of the skirt there is a large patch pocket. The skirt is finished with a false hem.midwifery -
Bendigo Historical Society Inc.
Photograph - CARWARDINE COLLECTION: PALL MALL BENDIGO
Coloured postcard, embellished with wattle left hand side, and kangaroo bottom Rh corner. Image shows Pall Mall, looking northwards. Post Office, Hustler's mine with brick chimney visible on left. Alexandra Fountain in centre bottom, horse drawn vehicles and two trams at Charing Cross. Henderson and Goode Beehive building and Shamrock Hotel on right. Receipt number 355/16bendigo, business, carwardine soap and candle -
Bendigo Historical Society Inc.
Clothing - WOMAN'S BLACK SILK BLOUSE, 1880-1900
Clothing.Woman's black silk blouse. Bodice is made up of two layers. Inner layer of black cotton has full length front opening with placket with five buttons and button holes from 5cm below round neckline to 5cm above the waist. There is a breast pocket on the LHS (14cm X 11cm). The outer layer of black silk is attached to the inner layer at the shoulders (pleated) and around the arm holes, and hand stitched at the lower back to form a casing for cotton tape ties. The front forms a full width crossover with one metal hook on top LHS. The outer layer extends 7 cm below the inner layer at the waist with a 7cm peplum across the back. Set in long sleeves are tapered at the wrist with a 5 cm frill at the hem. Sleeves fully lined. Hand and machine stitched. Fold over collar (10cm) with squared corners.Decorative black , gold and pearl button on each wrist on hem.costume, female, woman's black silk blouse. -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Multiload CU250 IUDs associated with Dr Lachlan Hardy-Wilson, Multilan S.A, 1984
Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of each box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a vagina has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of each box is printed with distributor information. One box is sealed, and one box is unsealed. Unsealed box contains one IUD, sealed inside a sterile plastic pocket. Back of sterile pocket is printed with an expiration date of 06-12-1984. The IUD is in the form of a small plastic rod, or stem, with two small flexible side-arms. Each side arm has five small protrusions. A copper wire is wound around the stem. A nylon thread with two ends is attached to the bottom end of the stem. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Sculpture - Ceramic vignette of a caesarean section locked twin childbirth
This is a rare and hazardous obstetric complication, occurring approximately once every 90000 deliveries. It usually results in a low survival rate for the twin that presents first, with a stillborn rate over 50%. This piece is believed to be from South America, and is either from Colombia or Peru.Ceramic childbirth scene with three figures. At centre, a woman lies on a table giving birth. A figure wearing a hat stands to her right, resting their hand on her upper chest in a gesture of support. On her left, a gloved man with receding hairline and a moustache is leaning over her abdomen and is extracting two babies from her womb.obstetric delivery -
Donald History and Natural History Group operating the Donald Court House Museum
Bowl, Unknown Potter
Ceramic bowl found in hut belonging to Georgie Ah Ling, who operated a market garden for about 70 years on the edge of the township of Donald. Hand-molded blue and white ceramic bowl. Outside of bowl has underglaze blue decoration of flowers, leaves and Chinese characters. Saw toothed decoration, with one line underneath, around outside rim. Half moon shape lines, with two lines through them, decorate inside rim. Two lines around inside base with one Chinese character in centre of inside base.One Chinese character on inside base of bowl. Four Chinese characters and five plant symbols on outside of bowl. ceramic, bowl, hut, georgie ah ling, market garden, donald -
Deaf Children Australia
Sonotone 700 Hearing Aid, Sonotone, 1946
Although Lee DeForest invented the triode vacuum in 1906, it was not employed in hearing aids until 1921. The first hearing aid using a vacuum tube was purported to have been made by Earl C. Hanson. He called his hearing aid the Vactuphone. It used one small peanut tube (below right) to amplify the output of a carbon hearing aid. The Globe Hearing Aid Company and Western Electric collaborated to manufacture the Vactuphone. By the early 1940s, Raytheon had developed miniature vacuum tubes. It was these miniature vacuum tubes that made body-worn hearing aids a reality. Unfortunately, the power requirements of these aids made it necessary to use two relatively large batteries—an "A" battery to power the filaments of the vacuum tubes and a "B" battery to supply the high-voltage for the plate current. The batteries were worn external to the hearing aid itself and the name "Two-piece" hearing aid was used to describe them. Until about 1945 "Two-piece" hearing aids were the norm. However, improved vacuum tube design reduced current requirements. As a result, battery manufacturers were able to reduce the size of the batteries used in hearing aids. At the same time, electronic components were also being miniaturized. This allowed the hearing aid manufacturers to design hearing aids with internal batteries. After 1945, these "One-piece" hearing aids quickly replaced the more cumbersome "Two-piece" hearing aids. With continuing improvements in both batteries and components, hearing aids continued to reduce in size until 1953 when the vacuum tube was suddenly supplanted by the transistor.Fawn plastic hearing aid with metal clip on back and wires leading from the bottom. Made in the USA, sold by Angus & Coote as the Sole Australian Agents. The Model is the Sonotone 700. Two dials one on each of the top corners."ANGUS & COOTE/Sole Australian/Agents/C D C" Printed in black on the back, top left hand corner. "SONOTONE/700/SERIAL NO/843218/MAD IN U.S.A./SEE PATENT NOTICE/IN INSTRUCTION BOOK" imprinted on back, centre middle.deaf children australia, hearing aid, sonotone hearing aid, sonotone 700, angus & coote -
Dutch Australian Heritage Centre Victoria
Suitcase (Koffer)
Suitcase brought by Dutch immigrant.The fact that the owner reinforced and mended the suitcase suggests the Dutch trait of taking care of things and making them last. The stencilled initials suggest this case was probably stored in the hold.Brown painted suitcase of reinforced oilcloth with metal handle and two metal locks. A small door lock has been added to the lid which has been reinforced on the inside by a timber slat. A plywood slat has been added to the handle side of the case. The rims of lid and case are made of metal, as are the corners. The papered interior of both case and lid shows a small floral pattern in black and beige although, as part of the reinforcement, a coat of brown paint has been added to the inside of the lid and case, but not the bottom. Of the two straps designed to hold down the contents one is still in place, but the other has been replaced by a length of elastic. The original strap is made of cotton, now a dirty white with blue edging, and does up with a small metal buckle. The interior of the case shows a lot of wear and tear with evidence of multiple repairs. A small black metal chain holds up the lid, the corresponding one on the opposite side is missing. On the inside: the timber slat carries the name A.T.A. RIJKEN in black ink and also on a black Dymo label. On the outside: the handle side displays the initials A.T.A.R. and the figure 3 in white stencil. The lid bears evidence of a label in the bottom left hand corner. The lock, added by the owner, is 3cm in diameter and branded ELZETT Made in Hungary.luggage -
Dutch Australian Heritage Centre Victoria
Commemorative Mug (Melkbeker)
In 1898, when Princess Wilhelmina attained her majority, she succeeded her Mother, Queen Emma, who had been Regent for 10 years. Wilhelmina reigned for 50 years until her abdication in favour of her daughter Juliana in 1948.The House of Orange is one of the most popular monarchies in Western democracies. Widespread celebrations accompanied the Abdication/Accession. A souvenir pottery mug handed out to school children in Amsterdam in 1948 to commemorate the abdication of Queen Wilhelmina and the accession to the throne of Queen Juliana. This kind of mug (without a handle) was typically used by children to drink their milk. It is illustrated with the initials of the two Queens surrounded by oranges (for the House of Orange). Blue banners link the bunches of oranges. There is also a depiction of the famous steeple of the Wester Church, the Amsterdam coat of Arms, a ship, a bridge and a typical canal house.Above the W: "Dankbaar voor het verleden" (Grateful for the past) 1898-1948. Above the J: "Vol vertrouwen in de toekomst" (Full of confidence in the future) 1948 -
Dutch Australian Heritage Centre Victoria
Cigar Mould (Sigaren Plank), early 20th Century
Dutch cigar industry was prominent in the eastern part of Noord Brabant in towns like Helmond.Dutch colonial history. Cigar smoking was popular amongst Dutch men5784(a) and 5784 (b) are two pieces made of wood (presumed to be pine). 20 slots to mould the cigars. Bottom piece has deeper slots for the cigars. The two pieces are not solid pieces of wood. The bottom piece is made from two boards/pieces of wood stuck together with aeration space left in between. The top piece has 20 individual moulds/slot glued on. The two pieces can be locked in via three wooden pegs into their corresponding slots On the back of the lower board/piece - there are two holes lined with metal rings (diameter of 1cm) Note that the size given applies when the two pieces are fitted together.On the top board - There is stamped the numeral "53". To the left of this number, we have the manufacturer's circular logo with details - L. Bezemer & Zn. N.V. Helmond Holland PERLU-VORM In front on the left-hand corner of both halves - etched number "7298"cigar, industry -
National Vietnam Veterans Museum (NVVM)
Memorabilia, Men At War And Peace, 2006
A paper Memorabilia dated 2007 depicting twenty-two naked men photographed in sepia. each month as the photo of a soldier now and then. Front cover depicts three men on horses being photographed by a fourth man . There are cattle behind the horses. On the top left hand of the Memorabilia "Men at War and Peace"Various supporters: thales, TPI, Herald Sun, PIXLmemorabilias