Two coloured Photograph in a black frame. Photograph on the left shows US and Australian troops standing around two helicopters. The photo on the right is an Australian soldier standing by a helicopter. Bottom left of the photogra[h reads Voyages to Vietnam Collection. bottom right hand side of the photograph reads Courtesy Virginia Jacobs.photograph, ran, voyages to vietnam collection, cerberus collection

A coloured photograph in a black frame of two Huey choppers on board HMAS Sydney. Bottom left hand corner are the words Voyages To Vietnam Collection.Bottem right hand corner are the words Copyright Ian Stackerphotograph, hmas sydney, huey helicopter, cerberus collection, voyages to vietnam collection

A black and white laminated etching of two escorts ships at sea. Numbers on ships are 53 and 50. At the top of the etching reads "Vietnam Escorts Limited Edition Series. At the bottom right hand side is the No:001Bottom left hand of the etching is Randall Wilson 1998etching, cerberus collection, vietnam escorts limited edition series

A black and white etching of two frigates in port. Front of etching is F05 Paramatta frigate with sailors on board. Second frigate is 07 Parramatta. bottom right side of etching reads Randall Wilson 1998. Top of etching reads Vietnam Escorts Limited Edition Series" Bottom right hand side of etching is the No: 000etching, cerberus collectio, hmas parramatta, hmas yarra, vietnam escorts limited edition series

Dance cards or Harmony Lodge (No. 203) ball held on 29 June 1915. Dance program printed on rear has provision for names. The printing of the words 'Harmony Lodge' on the front was originally in gold.Two cards of blue cardboard printed in dark blue both sides. String threaded through the hole in the top left hand corner of each card attaches a small pencil. Pencil painted white with tin metal cap attachment.harmony lodge, harmony lodge 203, dance card, st kilda balls

Invitation by the City of St Kilda to the Mayor of St Kilda, Francis Leslie Dawkins, and his wife, to attend a Complimentary Ball at St Kilda Town Hall on 21 August 1928. Signed by Henry F Barnet, Richard J Edwards, Burnett Gray and two others (indecipherable), as Chairman, Hon Treasurer, Hon Secretary and (indecipherable).Paper, hand written in red, green and blue and affixed to stiff cream card.Four signaturesst kilda balls, st kilda mayoral function

Notice of a meeting of citizens, convened by the Mayor of St Kilda, to raise funds for the widow and child of the late Albert Jacka, former St Kilda Councillor (from 1929) and Mayor (1930). The meeting was held in the St Kilda Town Hall on 25 January 1932. Albert Jacka had collapsed on 14 December 1931 after a council meeting and was admitted to Caulfield Military Hospital. He died on 17 January 1932 at the age of 39. Albert Jacka is most well-known for his military service in WWI, having received the Victoria Cross medal for his actions during the Gallipoli campaign and two more decorations for his bravery on the Western Front. He received a hero's welcome on his return to Melbourne in January 1920 and an estimated 50,000 people turned up to watch his funeral procession to St Kilda Cemetery, where he was buried with full military honours. On 29 January, the appeal committee, chaired by Brigadier-General Brand, decided to call for donations to the Albert Jacka Fund by 29 February. The Fund had two objectives: 'In the first instance, the erection of a simple, suitable and inexpensive memorial stone over the grave of the dead hero, and secondly the placing of the residue of the fund in the hands of trustees for the benefit of his widow and child.'White paper, discoloured with age, printed in blue on one side.albert jacka, city of st kilda, jacka appeal

Concert program of entertainment as aprt of fundraising for the Jacka Appeal, held on 17 February 1932 at St Kilda Town Hall. The headline performer was Gladys Moncreiff, 'Australia's Queen of Song'. Albert Jacka, a St Kilda Councillor, collapsed on 14 December 1931 after a council meeting and was admitted to Caulfield Military Hospital. He died on 17 January 1932 at the age of 39. He is most well-known for his military service in WWI, having received the Victoria Cross medal for his actions during the Gallipoli campaign and two more decorations for his bravery on the Western Front. He received a hero's welcome on his return to Melbourne in January 1920 and an estimated 50,000 people turned up to watch his funeral procession to St Kilda Cemetery, where he was buried with full military honours. The Albert Jacka Fund had two objectives: the erection of a simple, suitable and inexpensive memorial stone over the grave of the dead hero; the placing of the residue of the fund in the hands of trustees for the benefit of his widow and child.Folded cream card with scalloped edges and printed in purplealbert jacka, jacka appeal, gladys moncreiff

Photo shows two adults and four children with croquet sticks in hand in front of building black and white photograph, unmounted, copy, good conditionOn back: Brighton Road, w side Built for Emil Thoneman, Merchant. Demolished approx 1960. Flats now on the site in Wimbledon Avenue

Foreground includes grass patch with visitors leisurely strolling in period dress, two police leaning on bikes, a smattering of visitors sitting along shore; midground shows walkway over beach to the Bathshand tinted black and white image, unmounted, good condition, unusedThe Baths, St Kilda [on front] [postcard format on back]

The trolley entered service for the Commonwealth Railways (later Australian National Railways) as trolley number "386" and was originally built to the gauge of 3"6.Historic - Commonwealth Railways - Narrow Gauge Railway - Track vehicleThe tricycle is red and has three wheels, two large on one side with a single offset wheel on the other. Timber and steel constructionhand tricycle, commonwealth railways, australian national railways, trolley, puffing billy

This type of trolly is known to date from prior to 1910 and were in use before petrol engines were used to transport workmen along the railway lines. The exhibit was located at Colac in 1961, after being used on the Colac to Beech Forest and Crowes narrow gauge railway. This type of trolly was built in two versions; one for the Victorian Railways broad gauge lines, and one for the narrow gauge lines.Historic - Victorian Railways narrow gauge - track work vehicle. This vehicle was used in the days before petrol engines were used to drive vehicles transporting workmen along the railway line.C2N Type Trolly - Victorian Railways Gauge 2'6" Trolly Has a flat piece of wood that you would stand on with four metal wheels, one under each corner.c2n, trolley, victorian railways, hand power, narrow gauge, puffing billy, trolly

Constructed for 50th anniversary of the Young Sun newspaper special trains that ran between Upper Ferntree Gully and Belgrave in 1954. In 1954, special trains sponsored by The Sun newspaper, were run to farewell Puffing Billy. They became the catalyst for the creation of the Puffing Billy Preservation Society, and are the reason we still have the railway today. 60th Anniversary of the First Puffing Billy Young Sun Special - On Saturday, 13 December, 2014, the Puffing Billy Young Volunteers Representatives Team celebrated 60 years (plus two days) since the first Young Sun Special. Locomotive 14A was transformed onto '3A' for the day and it as '3A' that hauled the Recreation Train to Emerald Town StationCommemorative Puffing Billy Railway Locomotive Head Board - used in the Celebrating the 60th anniversary of the Young Sun special trainSmall, circular sign made from hand-painted steel. Yellow background, black text "Young Sun Special"around the upper and lower edges; "1954 - 2014"on left and right respective; centre image of red sunrise with black sunrays, and black rooster image in foreground with black text "DAILY AT DAWN" Young Sun 1954 to 2014 Special young sun, head board, puffing billy, newspaper, signage, 1954 -2014, puffing billy preservation society, young volunteers representatives team, 60th anniversary

Historic - Victorian Railways Station Rubbish Bin - used at the time of Mr Clapp, Chairman of the Victorian Railways Commissioners "Eat More Fruit" campaignHistoric - Victorian Railways Station Rubbish Bin - used at the time of Mr Clapp, Chairman of the Victorian Railways Commissioners "Eat More Fruit" campaignTin lined wooden box with sign writing on two sides.Fruit skins and rubbish must be deposited here (hand sign written on two sides ).victorian railways, rubbish bin, puffing billy railway

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

Zeehan & North East Dundas Tramway Bogie 1896 The North East Dundas Tramway (NEDT) was a 2 ft (610 mm) narrow gauge tramway on West Coast Tasmania that ran between Zeehan and Deep Lead (now Williamsford). It was part of Tasmanian Government Railways. The line was opened in 1896 to carry ore from the Williamsford mines to Zeehan where it would be loaded onto another train for shipment to Burnie. The narrow-gauge (2 ft) was chosen because of the extremely difficult terrain that the railway crossed, requiring several big trestle bridges, including one at the foot of Montezuma Falls. After some rain the engine and carriages would get soaked by spray from the falls. There was a break-of-gauge with the mainline 1,067 mm (3 ft 6 in) system at Zeehan. The railway was closed in 1932. The rolling stock for the Tramway was built in the Launceston Railway workshops, and comprised twenty five eight-wheel low-side trucks, tare 3 tons 1 cwt. 1 qr., load 10 tons; six eight-wheel flat trucks, tare 2 tons 18 cwt. 1 qr., load 10 tons; two four-wheel bolster trucks, for carrying long timber, tare 1 ton 19 cwt., load 5 tons; and four passenger cars, each with six cross-seats with reversible backs, to carry eighteen passengers, also a locker for mails and parcels. All trucks and cars have cast-steel wheels 21 inches in diameter and are fitted with automatic vacuum brakes. The trucks have side levers and the cars have hand-screw brakes. The vacuum brake can be worked from the engine or from the passenger cars, which act as brake vans. When this brake was introduced, one effect was to accelerate the journey speed by about 10 minutes owing to more even running on down gradients. Historic - Industrial Narrow Gauge railway - Bogie used on the Zeehan & North East Dundas Tramway, Tasmania, Australia Bogie made from steel, iron and wrought ironZN & NTDS ML TRAM 1896 Griffinpuffing billy, bogie, zeehan & north east dundas tramway bogie, zeehan & north east dundas tramway, industrial narrow gauge railway, gauge: 2' (610 mm)

The Adlake Non Sweating Lamp "THE ADLAKE NON SWEATING LAMP CHICAGO" Adlake is a shortened name of the "Adams and Westlake" company. They began doing business in 1857 in Chicago. They manufactured railroad supplies and hardware in Chicago. In 1927, they moved to Elkhart, Indiana, where they remain in business today. The difference between "lamp" and "lantern" is that the lamp is meant to be hung on a post or a hook during use and the lantern is hand-held and only used when a person is directing traffic. It has four lenses- two amber and two blue. Adams & Westlake, also known as A&W or Adlake, became a dominant maker of short-globe lanterns and their #200, #250, and plain “Kero” (sometimes known as #300 or #400) models were sold by the thousands to the entire range of railroads. Short-globe lanterns came about because manufacturers figured out how to get a lantern to burn properly with a shorter combustion chamber, which allowed lanterns to be shorter and cheaper. Adams & Westlake began selling #200 Kero lanterns around 1921 and they sold well, the #250 Kero lantern was released in the mid 1920’s as an improvement over the #200 version, with a new burner design. FInally, around 1930 Adams & Westlake released models marked simply “Kero” but are sometimes known as the #300 or #400 models, which are further refinements. The #200, #250, and “Kero” models all look very similar in design and in fact they are all pretty much the same frame design with a couple of minor differences on the later “Kero” models. Short globe lanterns are still very easy to find because they were produced well into the mid 1900s. Adams & Westlake short globe lanterns can usually be dated by looking for a two-part date code on the bottom of the lantern. The first digit will be 1,2,3, or 4 followed by a dash and then a two digit number. Sample code: 2-39 would mean that the lantern was produced in the 2nd quarter (Apr-Jun) of 193Historic - Railways - Adlake Non Sweating LampAdlake Non Sweating Lamp made of metal and glass Metal with handle, painted black, oil Bullseye lens, 13 cm diameter, green Circular lens on opposite site, 5 cm diameter, clear Sliding panel provides access to burner Rain shield embossed 'THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON''THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON'puffing billy, adlake non sweating lamp

Hand Rail Drill Out on the track in the old days, it was sometimes required to drill some holes in a piece of rail so that two rails may be joined together by a metal joiner – called a fishplate. Before the use of generators and oxy cutting, the only way to do this was with a hand drill. This is the machine operated by two people, that would drill a hole in the rail. With two to three holes to be drilled in each rail end (ie 4 or 6 holes), it was a tiring, back breaking job. And then there was usually the rail on the other side of the track to be done! Historic - Railways Permanent Way and Works - track equipment - Hand Rail DrillHand Rail Drill made of metal puffing billy, hand rail drill

Hand Operated Rail Saw Out on the track in the old days, it was sometimes required to cut a piece of railway track. Before the use of generators and oxy cutting, the only way to do this was with a hand saw. This is the machine operated by two people, that would cut a piece of rail in half. And when the rail was cut, it was usually required to join it to another rail which required putting in 4 to 6 holes in the rail with a Hand Operated drill. Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Saw Hand Operated Rail Saw made of cast metalpuffing billy, hand operated rail saw

The Battle of Sunda Strait was a naval battle which occurred during World War II in the Sunda Strait between the islands of Java, and Sumatra. On the night of 28 February – 1 March 1942, the Australian light cruiser HMAS Perth and the American heavy cruiser USS Houston faced a major Imperial Japanese Navy task force. After a fierce battle of several hours duration, both Allied ships were sunk. The sinking of HMAS Perth at the Battle of Sunda Strait 28 February -1 March 1942 cost 357 Australian lives. A further 324 crewmen fell into enemy hands. Two and a half years of brutal captivity claimed the lives of 106 of these men - 53 on the Thai Burma Railway alone.Framed cuttings of newspaper articles,13 photographs and 7 flags As Portrayed to the Australian Public 1942-1945 BATTLE OF JAVA SEA & SUNDA STRAIT 27 FEB - 1 MAR 1942 The first and only battle fought by a combined American Australian British and Dutch Naval Force against the Japanesesunda strait, hmas perth

HMAS Melbourne never fired a shot in anger during her career, having only peripheral, non-combat roles in relation to the Indonesia-Malaysia confrontation and the Vietnam War. She was, however, involved in two major collisions with allied vessels; though Melbourne was found not to be the primary cause of either incident. The first occurred on the evening of 10 February 1964, in which Melbourne rammed and sank the RAN destroyer HMAS Voyager when the latter altered course across her bow. Eighty-two of Voyager's personnel were killed, and two Royal Commissions were held to investigate the incident. The second collision occurred in the early morning of 3 June 1969, when Melbourne also rammed the United States Navy (USN) destroyer USS Frank E. Evans in similar circumstances. Seventy-four American personnel died, and a joint USN–RAN Board of Inquiry was held. These incidents, along with several minor collisions, shipboard accidents, and aircraft losses, led to the reputation that Melbourne was jinxed. HMAS Melbourne was a Majestic-class light aircraft carrier of the Royal Australian Navy (RAN). Operating from 1955 until 1982, she was the third and final conventional aircraft carrier to serve in the RAN. Melbourne was the only Commonwealth naval vessel to sink two friendly warships in peacetime collisionsMoulded patterned black plastic frame and mount containing black and white print of hand drawn ship at seaThe Majestic Melbourne Dedicated to those who servedhmas melbourne, ran, aircraft carrier

History has it that the origins of the Slouch Hat began with the Victorian Mounted Rifles; a hat of similar design had been worn in South Africa by the Cape Mounted Rifles for many years before 1885. The design of the Victorian Mounted Rifle hat originated from headgear of native police in Burma where Lieutenant-Colonel Tom Price had recognised its value. The Victorian hat was an ordinary bush felt hat turned up on the right side. The intention of turning up the right side of the hat was to ensure it would not be caught during the drill movement of “shoulder arms” from “order arms”. The Slouch Hat became standard issue headdress in 1903 and its brim position was mostly standardised. The slouch hat became a famous symbol of the Australian fighting man during World War One and continued to be worn throughout World War Two. Its use since that time has made it a national symbol.Slouch Hat - made of fur felt with an 8 fold hat band (puggaree) it has the blue/gold unit badge on the band denoting the 8th Light Horse brigade with a leather chin strap. The right hand side is held by a brass rising sun badge.army, slouch hat

Recruitment poster urgently calling for enlistments to the AIF during World War Two. The poster depicts a man donning a uniform, rifle in one hand, his civilian clothes lie in heap on the ground behind him.Australian Commonwealth Military Forces Second World War recruitment poster released in 1941 before Japan had entered the war, at a time when many Australians were reluctant to enlist to fight on the other side of the world. Dark timber frame containing poster of a soldier JOIN THE A.I.F THIS IS SERIOUS ENLIST NOWrecruiting, oster, ww2

Two rod type rifle grenades bought back from WWI by Sgt Major Albert James. Originally designed to be jammed into enemy tank tracks.The rod-type rifle grenade is a standard hand grenade with a metallic rod attached to the base. They were developed prior to World War One. Metal Rifle Launch GrenadeHope /18 (written on the side of one)world war one, ww1, wwi, first world war, grenade, rifle grenade, rod type

Sketch Map of Bulldog-Wau Road New Guinea drawn to scale by 2/1 Aust Fd Coy dated 23.7.43 and signed by soldiers together with related newspaper article. Hand sketched by Peter Muncey VX10042 a Draughtsman who served in the Middle East Ceylon and New Guinea with the 2/2 and 2/1 Field Coy Royal Australian Engineers. The sketch contains 26 signatures including:- S/Sgt Raymond Hector Ibbotson NX14112 who served in the Middle East and New Guinea Lt Col Jack Graham Wilson NX 130646Bulldog Track also known as Bulldog-Wau road was longer, higher, steeper, wetter, colder and rougher than Kokoda Track. In 1943 Australian Army engineers; the 2/1 and 2/16 Field Company RAE, 9th Australian Field Company (AIF), veterans of Syria, Palestine, Egypt, Greece and Crete, the 1st and 3rd Australian Pack Transport Companies and local Papuan labour cut the road with pickaxes and dynamite over a period of eight months. During five months of operations over seventy per cent of the 2/1 Australian Field Company contracted malaria.Seventeen bridges were constructed; mostly single, but at least one with multiple spans. More than two thousand Australian army personnel and over two thousand Papuans and New Guineans were involved during nine months of construction. Thus the road, acclaimed as the greatest military engineering feat ever, was completed and for the only time in history motor vehicles crossed the high rugged mountains of Papua New Guinea. Carved brown timber frame with cream mount containing hand sketched map with soldiers signatures and two newspaper articles.Sketch Map of Bulldog-Wau Road 23.7.43 2/1 Aust Fd Coy Newspaper - Diggers pushed on with pick and shovelbulldog-wau road, map, new guinea, ww2

This trophy was important in the years 1983-1988 as it recorded the winners of the prestigious Road Race run by the Geelong West Cycling Club over those years. The 1985 winner - Don Wilson was a two time Australian Open Road Race champion and also represented Australia in the 1968 Olympic Games in Mexico in the cycling road race. This trophy records the winners of a Road Race run by the Geelong West Cycling Club during the years 1983-1988.Trophy for winner of the Penn Memorial Road Race. The trophy is in the shape of a gateway with one silver representation of a cyclist on the top of the gateway and another on a pedestal in the middle of the gateway. The two inner supports to the gate have a stylised decorative pattern on them in black, gold and red. On the left hand upright winners' names have been engraved. Additional engraving is at the base of the trophy."Geelong West Cycling Club/PENN MEMORIAL - ROAD RACE/IN HONOUR OF R.L. PENN(Senior) W.J. PENN/ Donated By The - Penn Families/1983 Z. Szalinski/1984 A. McPherson/1985 Don Wilson/1986 Ken Lewins/ 1987 Peter Wood/1988 Peter Cotter"geelong cycling club; geelong west cycling club; penn memorial road race; penn family; z. szalinsk; a. mcpherson; don wilson; ken lewins; peter wood; peter cotter;

Track cycle won by Jack Phillips 1929 in the Melbourne - Ballarat - Geelong - Melbourne Road Race. This was the first open road race won by a Geelong Amateur Cyclist. The Amateur Cycling Club was formed in 1929. This bike was restored by Ken Dickie who did his apprenticeship in fine line restorations and the painting was by Fred Cook. Hand grips by Harry Clarke. They used photographs from Jack Phillips of the original bike to restore the bike to its original colours and appearance.Track cycle one by Jack Phillips - the first of the big open road races won by an amateur.Restored Malvern Start Road Bike from 1929. Painted in red with the words Malvern Star highlighted in white on a blue background on the frame. The stem features two silver stars on a blue background. Single speed with wooden wheel rims. It has a leather saddle and rubber hand grips (formerly used as gas masks in WWI)"Malvern Star"jack phillips; geelong amateur cycling club; malvern star; geelong cycling club; 1929;

From the album of WWI soldier William West (1268) of the 29 Infantry Battalion, 5th Pioneers Battalion. This collection of postcards, photographs and clippings were sent between William and his family and loved ones during the years he was on active service. See also 207 and 220. Mini postcard - two separate black and white images both featuring the moonPrinted on front " The same old moon" Hand written on rear.. To Enid From Dad I just got a letter from you 22 July Best Love xxxalbum, photo album, newspaper clippings, postcard, wwi, wattle flower, wattle, australia, flowers, merry xmas, christmas