This hat box could have been used for either a man’s or a woman’s hat in the days when it was the custom for both men and women to wear a hat when outside the house or on social occasions. It would have been used in the home or for travel, especially when on board a ship. Hat boxes today may still be used but are usually made of cardboard or other less durable material.This box was acquired over 40 years ago from a local person. It is retained for display purposes.This is a round metal box with a circular base and a lid affixed with a metal hinge. The lid is wider at the front of the tin allowing for extra height for the stored item. The lid had a metal clip handle and there is a front metal clip for closing the box. The tin has been painted black but is much rusted, particularly on the top section. vintage headgear, history of warrnambool

Original flying spectacles worn by Flight Lieutenant Ian A. Lyons. Part of the Flight Lieutenant Ian A. 'Joe' Lyons MBE Collection. See Catalogue No. 5374P for his service record..1) Blue metal spectacles case with silver coloured metal hinges and clasp. Lined with blue velvet fabric. .2) Fabric covered metal frame for housing spectacles within the outer case - .1). .3) Metal framed aviator style spectacles with dark green lens. Clear plastic nose pieces..1) Stamped on top and bottom of case: 'SPECTACLES MKII. 22C/1370. LARGE, (upwards arrow).accessories, flying spectacles, flight lieutenant ian a. lyons

A Dray is a type of dead axle wagon that was used to transport heavy loads or objects. They had a flat level floor and while some had no sides, others had box bodies and sides. Tip Drays (also known as Tip Carts, Muck Cart, Scotch Cart, Tumbrel or Putt in different parts of England) were smaller than other drays as their loads were heavy and usually only pulled by one horse. Their basic design included two wheels, a tipping body and shafts. The Tip Dray has a unique mechanism that allows the top to tip backwards to tip the load out of the back of the dray. The tipper was activated by a handle at the front allowing the driver to operate it while still having control over the horse. A Tip Dray was an indispensable piece of equipment in the days before tractors and mechanical trucks. They were used by farmers and carters to transport hay, rocks, bricks, gravel and rubbish etc. and because they were useful for dumping loads, they were favoured for use in road and railway construction. A photo in the collection of the Lorne Historical Society shows a tipping dray being used during the construction of the Great Ocean Road. They were part of the daily street traffic in towns and cities around Australia from the early days of settlement. In Australia in the early 1900's, carters began to join unions to protect their jobs and pay. N.S.W. had a "Trolley, Draymen and Carters Union", Queensland had a "Tip Dray Men's Association" and in W. A. the "Top Dray Driver's Union" had a "cessation of work" in 1911 when they were fighting for an increase in their day's wages. In 1910 a meeting of Tip Carters was held in Geelong at the Trades Hall to discuss the formation of a union (The Geelong Tip Dray Carters) which was a success and a schedule of rates for all carting, whether by contract or day labor, was fixed. By 1912 they had "labelled" more than 50 drays and had representatives on the "Trades Hall and Eight Hours Committee". By the mid 1930's and early 1940's, tip drays were being superseded by mechanical trucks and utes. However tip drays continued to be used in some circumstances. They were a practical solution to the problem of petrol rationing during W. W. 2. It was noted in a letter to the editor in the "Sunshine Advocate" in 1938 that a positive argument for continued use of Tip Drays for rubbish collection related to the idea that a horse drawn vehicle involved with lots of stops and starts at different houses (very like a milkman's delivery route) often involved the horse "driving itself" while the driver picked up the rubbish - something a motor truck was unable to do! Another article written in August 1935 and published in the Age in a parliamentary report into the rubber industry noted "tip drays had almost disappeared and in their place, metal was carted in 5 ton motor trucks" but the report went on to say that as a part of the Government relief work (during the Great Depression) the Government had "to some extent reintroduced the tip drays so that a greater number of men would be employed". This particular tip dray was owned by Mr. Oswald (Jack) Bourke. He used it to deliver dry goods from Sunbury to the Queen Victoria Market in Melbourne several times a week in the 1930's and then (between 1945 and 1962) Mr. Bourke used it on the garbage round in Springvale Victoria for the Springvale Council. The Council owned three drays and the "No. 3" painted on this dray is in recognition of its original number. After the death of Mr. Bourke in 1990, one of Mr. Bourke's sons (Andy) found the dray in a shed and restored it. The sign writing on the back and side panels were added during the restoration. This Tipping Dray is a significant example of a horse drawn vehicle that was used by workers from the early days of white settlement through to the 1940's and even into the early 1960's. It was used in a range of "working class" occupations - road construction, railway construction, carting goods, rubbish collection etc. and would have been found in cities, country towns and on farms.A wooden and metal tipping dray with a box body and four sides. It has two iron and wooden wheels (with 14 spokes), two wooden shafts and a metal tipping mechanism. The back panel folds down to allow loads to be dumped out. It is painted in green and cream with sign writing on one of the sides and on the front and back panels. It features decorative painted lines and designs in burgundy, cream and light blue on most of the wooden parts. The tipping mechanism is on the front of the dray's left side and consists of a metal pin secured with a metal ring, and a lever.Front of dray - "No. 3" Side of dray - "A. & M. BOURKE / Contractors / LONGWARRY" Back of dray - "G.T. ANDREWS / QUEEN VICTORIA MARKET - Stand C23 / Phone DANDENONG 225"flagstaff hill maritime museum and village, warrnambool, shipwreck coast, tipping dray, dray, tip dray, tip cart, vehicles, horse drawn vehicle, springvale council, jack bourke, muck cart, scotch cart, tumbrel, putt, box body, oswald bourke, sunbury, queen victoria market, melbourne, no. 3

This wood plane would have been used in the past both in industry and in the home. It is an early example of a plane and has antiquarian interest. This item has no known local provenance but is retained as a good example of a vintage tool used in the past by carpenters and handymen. This is a metal tool for planing wood. It has a rectangular wooden base and two side bars for adjusting the length and angle of the blade. The tool has several metal wing nuts and screws and a wooden handle. The metal is much rusted. ‘Trade Mark 45’carpentry tools, history of warrnambool

This saw could have been used in industry or in a home situation. It was made by the H. Disston & Sons of U.S.A. This company was established in 1850 by Henry Disston and by the 20th century it was the largest maker of hand saws in the world. The hand saws used today differ little from this early model. This saw is retained as a good example of a hand tool that is over 100 years old. This hand saw has a triangular-shaped metal blade with a serrated edge on the straight side of the blade The handle is wooden with five metal screws. There is a metal plaque containing the name and emblem of the manufacturer. The saw is a little rusty and stained.‘H. Disston & Sons Philada’ ‘T.E.G.’ household tools, history of warrnambool, wood saw

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details..1) Badge, pressed metal, gold colour, crown, artillery piece, scroll. .2) Badge, pressed blackened metal, star, artillery piece, scrolls "India". .3) Badge, metal, gold colour, artillery piecebadges, collection

Pair of two sheave wood blocks; the top block has wooden sheaves and metal straps with bolt thimble, and the lower block has an external metal strap with a forged one-piece ring on top and metal sheaves.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, 2 sheave wood block, wood block, block, marine technology, marine equipment, lifting equipment, ship rigging, rigging, sailing ship

Francis Percival de Caux invented this endotracheal tube which was devised for use during nitrous oxide/oxygen anaesthesia. Though he wasn't the first to use a two-tube method of anaesthesia, de Caux's invention was particularly effective; in 1930 he reported having given 20,868 nitrous oxide/oxygen anaesthetics in a four year period without a fatality. A long flexible metal tube formed from tightly wound metal with a small bulbous introducer at the distal end. The tube is mostly encased in a metal and rubber sheath. The proximal end has a finger ring and screw clamp.endotracheal, de caux, airway, nitrous oxide, anaesthesia

Silver coloured metal petrol iron with removable top plate and cylindrical tank. Metal handle with blue painted wooden top attached and metal plaque with maker's details and insignia between screws on bottom section of handle.Plaque shows: (on left hand side) "All British / PUMPLESS IRON / Manufactured by / HANDI WORKS / Brisbane" INSIGNIA / "H" / in shield. (on right side) P/No. ? / D/S No. ? / Reg No. ? / FOR BEST RESULTS USE SHELLITEclothes iron, petrol

Round metal Belgian WWII helmet with chin strap. Inside head harness/fitting of leather with shoestring adjustments and 4 rubber buffers between harness and metal helmet, Inside of helmet reinforced with cross metal strapping. Name Jolley painted in white on outside front. Black Yellow Red Patch on outside right hand side.

Gold metal and leather desk calendar and pen holder. Features a gold metal perpetual calendar. Two black plastic pen holders with gold metal bases. Set on brown leather base with gold painted trim.

The wool industry has been critical to the Australian economy from the early days of European settlement. The increase in wool production in the mid to late 19th century led to the need to replace the hand shears with some mechanized forms of shearing.The first commercially successful sheep shearing machinery by Frederick York Wolseley in New South Wales who was granted a patent for his machine on 28 March 1877. Many of the early settlers to North East Victoria droved sheep overland from both Sydney and South Australia and established large pastoral runs in the district. Wodonga became a major service centre for the industry and established major saleyards for the pastoral and cattle industries. The handset has the company name "Heiniger" on the side. Heiniger is a Swiss company with subsidiaries in Australia and New Zealand. It was originally established in 1946.This item is connected to a major rural industry in North East Victoria.A metal handpiece for a sheep shearing. A toothed blade is held in place with metal adjustable screws at one end. A jointed metal pipe at the other end allows attachment to the shearing machine. The hinge has been covered with leather.On adjustment knob "Heinger"shearing industry, shearing equipment, shearing handset

Saw metal large on three sided wooden frame. Blade attached to frame by screws & tensioned by metal turnbuckle. A frame saw.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This deadeye was amongst artefacts recovered from the wreck of the Falls of Halladale. It would have been used on the ship to attach, hold and run ropes for the ship’s rigging. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barb wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject item is an example of ships rigging objects used on sailing ships during the 19th and early 20th centuries to transport goods around the world the item is representing aspects of Victoria’s shipping industry and maritime history. Deadeye; wooden deadeye, three (3) holes, with metal surrounds and metal rigging cable attached. Recovered from the Falls of Halladale.Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, clipper ship, rigging equipment, sailing equipment, deadeye, falls of halladale wreck, breakenridge & co glasgow, russell & co ship builders, cargo vessel, 1908 wreck, rigging, ship rigging

Item used to clean the barrel of an SLR (Self Loading Rifle).Metal rod tied to a rope. Rope has two loops incorporated. Loop in middle and loop in opposite end of metal rod.slr, pull through, kevin john herdman

1. Legging - Leather, brown, straps, metal buckles and rivets. 2. Legging - Leather, brown, straps, metal buckles and rivets.passchendaele barracks trust, pair leggings

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Green coloured polyester webbing belt with silver coloured metal slide buckle. Opposite end is tipped with sliver coloured metal.Stamped on back of buckle: “AROS, (upwards arrow)”uniform, belt, kevin john herdman

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Khaki coloured polyester webbing belt with black painted metal slide buckle. Opposite end is tipped with black painted metal.Stamped in black ink on inside of belt: “C.G.C.F., (upwards arrow) 1967, 40, 8440-66-012-6301”.uniform, belt, kevin joh herdman

The Australian Red Cross was established in 1914 as part of the British Red Cross and the Warrnambool branch was established in the same year. The local Warrnambool branch volunteers were mainly women who held sewing meetings, organized parcels for the soldiers abroad during World War One, undertook First Aid courses to be of assistance in hospitals and raised funds for the Red Cross, especially the local branch and the Melbourne branch. This badge would have been sold as part of the1916 fund-raising campaign.This badge is of particular interest as a badge connected to the Warrnambool Red Cross in World War One and presumably sold to raise funds for the local branch of the Red Cross. This is a circular metal badge with a cream-coloured background, a painted red cross and blue printing. The badge has a metal clip at the back Warrnambool 1916warrnambool red cross, world war one, badge

The hat box relates to the theme of travel and transport, centred around the arrival of European migrants and subsequent settlement of the Port of Echuca in the late 1800s.Round leather hat box with a metal carrying handle and a lock with a clip and a key hole. There is a metal clip on either side of the box .hat box, travel, settlement, 1800s

MAJOR THOMAS GLAZEBROOK, refer Cat No 4330.2.Great coat- Khaki colour, wool, yellow metal buttons, half belt at the back, metal "R" (retired) on each epaulettearmy uniform, great coat

Basic webbing waist belt, green colour with metal keepers & buckles, metal holes along belt for adjustment & fixing equipment.Written: “THOMAS”uniforms - army - accessessories, webbing, belt, equipment

Tin metal round cake tin with turned lip, join line at side and metal ring. One fits inside the other.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

String Basket with folding metal frame. Has metal handle with hand grip. Section has been repaired with shoe lace.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, string basket

Lamp, square metal frame lamp with 4 glass windows. Inside metal mechanism for wick. Top has chimney and handle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, lamp, shipwreck-coast, flagstaff-hill-maritime-village

Saw metal large on three sided wooden frame. Blade attached to frame by screws & tensioned by metal turnbuckle. A frame saw.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A block and tackle is a simple but highly effective lifting device, thought to have been invented by Archimedes. These systems were used extensively for construction in the ancient world, and continue to be used today for a variety of applications, especially at sea, where non-motorized lifting systems are highly useful. A basic block and tackle includes a single fixed pulley or block, and at least one additional pulley, linked with rope, to form a complete set. Depending on the size of the load being lifted, additional sets may be used to further distribute the weight.This wooden two-sheave block is part of a ship's rigging. Its an example of rigging equipment in use from the early-to-mid 20th century and an example of the evolution of rigging equipment since the 17th century.Block; two sheave wooden tackle block with metal rollers and a large metal hook. It has a compliance plate on the side with an inscription. Stamped inside a lozenge; "2 ↑ CS" flagstaff hill museum, flagstaff hill village, shipwreck coast, flagstaff hill, block & tackle, rope, lifting heavy weights, ship rigging, cargo lifiting, rope block, marine technology, ship equipment, rigging, two sheave block

Three picture hangers for use with a picture rail. One is black metal and the other two are silver metal with embossing. They are an S shape.picture hangers

8489.1 - Dark green cloth cap with bent metal lamp holder strip on front and the metal strip on brim is held on by string.