Discovered in the Chapel of St Peter when packing up for renovations. Probably a gift from an Eastern European crew member visiting the Mission TBC.Print of Eastern Orthodox style painting of Madonna and child on gold ground printed inscription lower edge of imageorthodox church, nativity, mary, jesus, crown, angel, artwork-paintings

c1900 Decorative silver 'pill boxes' were popular accessories carried in a small purse by women for evening and special occasions . This 'pill box' was used by a lady in the family of Ailsa Hunt in Moorabbin SSmall decorative silver pill boxes were a common accessory for early settler women in Moorabbin Shire c1900A small rectangular white metal pill box with gold lining, a hinged lid and snap lock machined pattern on lid with beading on edgeclothing, pill boxes, silver, pewter, brass, evening bags, victorian fashion, edwardian fashion, market gardeners, early settlers, moorabbin shire, bentleigh, mckinnon, moorabbin, cheltenham, wedding dresses, evening wear,

Photograph most likely used for promotional purposes. The machine possibly could have been manufactured by Chadwick Machine Co Ltd, a British textile machine company established in 1899.Black and white photograph of a carding machine.Rear handwritten top edge - Chadwickstextile machinery, wool manufacture, wool, spinning

Two small ornaments, one male, one female in a green dress. Impressed on the lower edge - Kirmamy 20714kimamy, ornament

Cased medal complete with miniature.Impressed naming on edge to W. Pearce.

1636.1 - Photocopy of part of City of Ballaarat's Mayor's Report for 1972- 1973. Originals held in the Ballarat Library. One page covering notes on the Councillors and the election of Cr. Melton Foo, who was the President of the Ballarat Tramway Museum, prior to the election. Has a photograph of Cr. Foo. An item on the page as well are notes on the banking arrangements of the City of Ballaarat. 1636.2 - Photocopy of part of the City of Ballaarat's Mayor's Report for 1979 - photograph of Cr. Foo as the Mayor and the Mayoress, Mrs. Foo. 1636.3 - ditto, but the Introduction to the Report, written by Melton Foo as the Mayor.Details of the photocopy in pencil on the top edge.trams, tramways, city of ballaarat, councillors, melton foo, civic history

The 8th Light Horse (Indi) Regiment superseded the 16th Light Horse in 1919. It had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941, the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded.Part of a series showing aspects of camp life circa 1932Black and white photograph of 13 soldiers of 8th Light Horse Regiment photographed at Maribyrnong 1931Lower edge of mount " Maribyrnong 1931 "

Set of two manuals for MAN buses: .1 - MAN Maintenance recommendations 1985 - 25 A4 pages, landscape stapled in the top left hand corner - issued 7/1985. Photocopied from a MAN book. .2 - Chart of MAN recommended fuels and lubricants - 2 A4 sheets, stapled in the top left hand corner.Has "MAN" in ink on top edge.trams, tramways, buses, maintenance, man, manual

Set of three manuals for AEC and Leyland buses: .1 - Lubrication data for AEC Mk VI bus - Part S72 - photocopy of original document - 5 A4 pages - undated. .2 - Leyland lubrication recommendations 1973 - All models - G47/73 - 10A4 pages .3 - Leyland National Bus lubricants and fluids - 6 A4 pages, c1968.Has "MAN" in ink on top edge.trams, tramways, buses, maintenance, aec, leyland, manual

This unique aircraft was conceived in 1943 as a two seat trainer. A very large part of the design work can be attributed to Jock Barratt and Harold Bradley. The general layout adopted is similar to the Kite I and Kite II single seat sailplanes of Martin Warner and Allan Campbell. Having regard to this heritage, the glider was originally named Kite III but renamed Pelican 2, perhaps because it was the second two seat training glider built by the Waikerie Gliding Club – the first being the Pelican, a reconfigured Pratt Utility glider. Pelican 2 was first flown in 1952 and regularly since then, at least until about 1992. The Pelican 2’s performance was found to be very good for sailplanes of its era and was often used for more advanced flying in addition to training new pilots. Very few changes have been made to the Pelican 2 over the years. The undercarriage was modified after its initial testing to improve the placement of the wheels. The trailing edge of the rudder (originally straight) was rounded adding to the surface area. The twin shoulder tow line bridles were replaced with a belly hook when aviation design rules declared shoulder bridles dangerous and a nose hook has since been added to allow for aero-towing. A unique home grown sailplane design associated with Australian gliding pioneers Wooden 2 seat glider sailplane with fabric covering. Distinctive features include the pod and boom fuselage with side by side seating for pilot and a second person. The canopy of perspex supported by aluminum framing opens with port and starboard segments separately folding upwards and forward. The instrument panel includes altimeter, airspeed indicator, slip indicator and variometers. In addition to the usual controls, there is a trim operated by a small wheel mounted centrally, at head height, on the bulkhead at the rear of the cockpit. Incorporated in the skid under the fuselage pod are two wheels (one approximately midships and the other at the rear end). It has a three piece cantilever wing of approximately nearly 17 metres. The ailerons run almost full length of the outer wing segments. A Gottingen 426 section has been used changing to M6 at the tips. Outer wing segments are joined to the centre section to give about 300 mm of dihedral at the tips. The glider is equipped with airbrakes. The colour scheme consists of orange fuselage with black nose and skid. The tailplane / elevator and rudder are painted white. The wing is predominantly white with an orange leading edge. Registration VH-GFY On each side of rudder – “Pelican II” in black lettering on a rectangle of silver On each side of fuselage pod the letters ‘FY’ On each side of the fuselage, below the edge of the cockpit opening – “WAIKERIE” in black paint. australian gliding, glider, sailplane, kite, pelican, waikerie gliding club, jock barratt, harold bradley, martin warner, allan campbell

The circular cast iron object is a lid that was originally fastened into a ship tank. This particular lid is cast with the name ‘Lancaster & Co Bow London E’ in capitals in a continuous circle on the outer edge of the lid face, and has the words ‘Bow Tank Works’ on the inner circle. It is the same type of round heavy lid that was made by tank manufacturer John Bellamy although it may be a younger example. According to Pearson, the Lancaster & Co firm produced tanks between 1910 and 1930 from their works in Bow, East London. It was possibly preceded by the company, Lancaster & Bawn, which ran between the 1870s and 1890s.Pearson has collected a list of Lancaster & Co tank lids that he and others have sighted at various locations in Australia including Coolgardie, WA; Gulgong Museum, NSW; the Quarantine Station, Sydney NSW; Blundell’s Cottage, NSW; and Woolmers homestead complex, TAS. In addition, Lewis has identified lids at Ayrdale, NSW, and the shearing shed at Murndal homestead, Western Victoria. It is most likely that more than three lids survive in Victoria and more will be identified, however, as noted by Pearson, ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’.Parks Victoria has identified five tank lids in the lightstation collections. There is another Lancaster & Co lid at Cape Otway and possibly a second example there as well. In addition there are Bellamy lids at Point Hicks and Cape Otway and an unidentified lid at Wilsons Promontory, and a tank without a lid at Wilsons Promontory. The Lancaster & Co ship tank lid has first level contributory significance for its historic values.Circular cast-iron disc, with raised outer ridge with inscription and inner depression with inscription. One metal section forms a handle over an inner depression.Around perimeter of outer edge "BOW LONDON.E LANCASTER & CO " Around inner area "BOW ANK WORK"

Black and white illustration of PMTT No. 61 at the corner of Orrong and Balaclava Rds, c1917. Tram has route No. 4 in the window. Has a very large house entry gates in the background. Illustration has been pasted onto a piece of light cardboard with a caption written on the lower edge.Along the bottom edge in ink "P&MTT No. 61 (latter H class M&MTB) at the corner of Kooyong and Balaclava Rds in 1917. Property in 2011 shown as Melbourne Grammar School in Google Earth.trams, tramways, balaclava rd, pmtt, orrong rd, tram 61

Cream badge with black lettering 'Association for the Blind' around the upper edge, 'Mrs Kath Martini' in larger font in middle, and 'Kooyong' on the lower edge.Round cream badge with black writingAssociation for the Blind Mrs Kath Martini Kooyongbadges, association for the blind

A white dinner plate with scalloped edge trimmed with gold. Bright green band edged in gold amd with a sunburst design on inner edge.Made in England D & K Tunstall 0018domestic items, crockery

Curling at edgesPort Emergency Service jacket. Grey with orange stripe and lettering, velcro straps.PORT/EMERGENCY/AUTHORITY/SAFE-T-SHINE/PRODUCTS/(02) 667-2646/WASHING INSTRUCTIONS/ HAND WASH/DRIP DRY

Built in 1898 by early settler George Barber the property is still in existence today. It was the home of George, wife Sarah Ann and daughter Ethel.Black and white photograph showing te side view of George Barber's home, later named Forest Edge. c1905. Reverse of photograph has handwritten description by John Lundy-Clarke.Barber's home on Olinda Creek. Lot 25 Sect 1 Village Settlement. Home of George Barber and wife Sarah Ann (nee Richardson). Daughter Ethel.Was bought by Munnerley later Sangster and Kinnear. Later known as Forest Edge. Buggy and wagon shed on right. Photo copied 1973 by JLC.

These badges are WW1 and first released in 1917. Each bar signifies a son in the forces. .1) Hollow oval shaped blue enamel & silver badge. Silver crown on top, blue enamel banner below on outer edge. 2 silver bars suspended by rings underneath. Badge is affixed with the pin & loop on the rear. .2) The small case is cardboard covered in brown buckram. Inside is lined with blue silk & velvet. It has a brass button when pressed opens the lid. Below crown on a banner on outer edge: "DEPARTMENT OF DEFENCE TO WOMEN OF AUSTRALIA FOR DUTY DONE " Pieces stamped: Badge: "25932" Top bar: "10098" Bottom bar: "10099"badges, women of australia

A white dinner plate with scalloped pie crust edge trimmed with gold bright green band edged in gold and with a sunburst design on inner edge.Made in England H & K Tunstall 2109domestic items, crockery

Covers were used in the early 20th century to protect milk and sugar from flying insectsSquare net cover edged with alternate blue and white beads. A central bow is surrounded with a circular pattern at the edges. Beads inserted in crotched edgehandicrafts, food protection, jug covers, bowl cover

30 cm tactile yellow ruler with black marking every 5 centimeters with raised markings, has two different edges - straight and notched. The straight edge can be used for measuring and drawing, and the notched edge designed to help place pins when creating charts and graphs or using a compass. There are non-slip pads on the back of the ruler. 1 yellow ruler with black large print numbers and black measurement indicatorsRNIB LT21 (on back)assistive devices, royal national institute for the blind

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

Used in wood splitting to split with the grain of the wood. Splitting or stud axe bits are more wedge shaped. This shape causes the axe to rend the fibres of the wood apart, without having to cut through them. Possibly made by Kelly Axe Company after 1949.A wooden handled axe with a flat ended wedge shaped blade for hammering. There is a piece of orange cord threaded through the handle for hanging. Made in USA True temper flint edge.stud-axe tools

Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. Letterhead produced for Dr Young - music teacher in Ballarat.Off-white paper with green printing. Image of house in top right cornerName and qualifications. Dress along bottom edgekeith young, letterhead, dawson st, music, voice production, pianoforte, organ, singing

This is a copy of a photo of W. Evans and H. Lewis in the Wannon Valley at Christmas 1925.The photo shows two men wearing hats holding up a dead kangaroo by its ears and forefeet. They are standing in a grassed area surrounded by bush."1925" was written on the bottom edge of the original photo.recreation, hunting, wildlife, fauna

The tintype (or ferrotype or Melainotype) was produced on metallic sheet (not, actually, tin) instead of glass. The plate was coated with collodion and sensitized just before use. It was introduced by Adolphe Alexandre Martin in 1853. The most common size was about the same as the carte-de-visite, 5.5cm x 9.0cm, but both larger and smaller ferrotypes were made. The smallest were "Little Gem" tintypes, about the size of a postage-stamp, made simultaneously on a single plate in a camera with 12 or 16 lenses. They were often produced by travelling photographers, and were cheaper than Ambrotypes so made photography available to working classes, not just to the more well-to-do. The print would come out laterally reversed (as one sees oneself in a mirror). Being quite rugged, tintypes could be sent by post. Tintypes were eventually superseded by gelatin emulsion dry plates in the 1880s, though street photographers in various parts of the world continued with this process until the 1950s. (Above information abridged from http://www.rleggat.com/photohistory/history/tintype.htm) In 1863-4 A.Marion & Co. 23 Soho Square, London, were publishing cartes for Southwell Brothers of 16 & 22 Baker Street W. London, and in c.1866 producing cartes wholesale for Mayall of Regent Street. They appear to have printed numerous cards with a very small name printed onto the lower front. Travelling photographers would purchase the cards and sometimes have their own personlaised details printed onto the back..6) A tintype studio portrait of two seated men in suits, attached to a card, possibly brothers. On lower edge of card "marion Imp. Paris"little gem, tintype, photography

Purchased through the Horsham Art Gallery Trust Fund, 2011inkjet print on cotton rag paperSigned, editioned and titled in pencil, lower edge

'Rapid' tobacco tin for storing tobacco and contains 'Tally Ho' rice tobacco papers. Used for rolling own cigarettes. Chrome finished pocket size tin with canvas rolling mechanism. Tin lid is embossed with a decorative star/sun design. The tin is curved slightly to sot in a jacket pocket and making it easier hold when in use.'Rapid' stamped near the front edge of the lid.personal effects, smoking accessories