Magill laryngoscope with a battery in the handle was one of first of its kind This piece of equipment is made of stainless steel and has a canal on its left side and a handle to put batteries inside of it and it has attached a round screw to make it extendable. This object also has an stamped inscription and on the other side it has the manufacturer details. Stamped A.CHARLES KING.LTD Stamped REG.NO.749019 Stamped STAINLESSmagill, ivan, battery

Metal laryngoscope in two parts. A round hollow handle with a textured grip and a screwed in base for holding batteries. The metal blade screws in to the handle and has a moulded section for a small light bulb. Engraved in to top of blade, D.A. Engraved in to base of handle, B.T.S. / R.W.H. D.A. Stamped in top of the handle, PAT.NO.683731 Stamped in top of the handle, BRITISH [indecipherable]laryngoscope, light bulb, battery

A curved laryngoscope blade with bulb only. Its has an engraved detail about the place it belonged. Also, it has stamped on the blade the maker's seal and its material. At the base of the blade is stamped the place where it was made. The top of the blade has some scratches and the base has an oxide spot over the name of the place it was made. Engraved on the blade, Anaes. Dept. Alfred Stamped on the base of the blade, MADE IN ENGLAND Stamped on the blade left side, STAINLESS Stamped on the blade on top of the base a circular seal with the letters, BOC laryngoscope, light bulb, glass, blade, boc, british oxygen company

Curved laryngoscope blade and handle. The laryngoscope blade is identified as a MAC 3 RIESTER blade and is attached to the textured handle with a serrated grip for ease of use. The handle is also a battery deposit which has stamped on the lid base the manufacturer's name and the place where it was made.Stamped on the lid base of the handle, Penlon R [trademark] / Made in U K Printed on the blade base, MAC 3 RIESTER Printed on the blade base, STAINLESS STEEL C E / GERMANY Stamped on the blade base, TDD Stamped on the blade base, Gairway, laryngoscope, penlon, united kindom, germany, mac 3 reister, blade, the alfred hospital, melbourne, macintosh

Curved laryngoscope blade with light bulb only. Etched on the base of blade is engraved the word 'Whittam'. It has visible and deep scratches on top of its blade and back side. Also has on the edge of the blade a spot of oxidation and some green paint stains under the blade surface. Visible oxidation is present in the blade base back side over the small lamina attached by a screw. Engraved the presumably owner's name, Whittamlaryngoscope, blade, light bulb, curved laryngoscope, glass, whittam

Laryngoscope handle, with screw in connector for blade. It has a textured handle with a serrated grip for ease of use. The handle is also a battery deposit. Stamped on the base of the handle is the trade mark name details (PENLON) and the place where was made (ENGLAND). The piece has some slight scratches and surface subsidence because of its use. It has a residual marks from an used sticky tape on the base. Stamped on the base, REGD TRADE MARK / P E N L O N / MADE IN ENGLANDlaryngoscope, handle, screwed laryngoscope, screw, penlon, battery

Curved laryngoscope blade with light bulb only. It has visible scratches on top and back side of the blade. A rusty washer under the handle joint. Is also present in the blade base back side a curved shaped lamina attached by a screw. This blade correspond to a large size (adult) laryngoscope blade. It has stamped on the base inscriptions about: trade mark (PENLON), place where it was made (ENGLAND) and its material (Stainless).Stamped on the blade base, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped on the back edge of the blade, STAINLESSblade, penlon, light bulb, laryngoscope

Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon

Magill straight laryngoscope blade with tubular space for a light bulb connection (no light bulb is present). It is a PENLON piece, made in England. Size 1, for infant use. Has a slight yellowish discolouration over its base. General scratches around the base of the blade and a sticky old mark bellow an engraved inscription. It has engraved the name of the hospital where it came from and the initials of its owner.Engraved under the blade arm base the name, Royal Childrens Hospital Engraved in its lateral side attachment base piece the initials, D. A. Stamped at the back of the attachment base piece the type and size, MAGILL / 1 Stamped in its lateral side attachment base piece the trademark name and its made place, REG [is not visible the continuation] / PENLON / MADE IN ENGLANDmagill, blade, royal childrens hospital, metal, d.a.

Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia

Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england

Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine

Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand

A Soper adult size laryngoscope blade with bulb only. The item has several deep scratches over the surface and below of the blade. Oxide spots are present over the blade surface. The top surface of the blade is slightly bended. The end of the blade has a perforated line. On the base of blade is etched the word 'Whittam'.Engraved twice on the base of the blade, Whittam / Whittamsoper, blade, laryngoscope, adult, light bulb

A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb

Chrome plated metal "L" shaped tongue depressor. The depressor arm downside has cross-hatched grooves to facilitate adherence to the tong. A small metal tube is attached to the upper-side of the depressor through which anaesthesia or oxygen could be administered. The lateral arm handle has grips engraved to attach the mouth gag frame which is missing. This item has a stamp inscription on its handle about maker's details, size and material. Black spots of dust are present inside the metal tube and out near the extreme of the tube. It has accumulated dust between the cross-hatched grooves. Minor scratches around the piece.Stamped in the depressor handle, D.H.A. / 6 / STAINLESSboyle-davis, tongue depressor, airway management

New instruments were created using as archetype Physick´s tonsilotome model. Fahnestock, in the United States, 1832, Mackenzie in London, 1880, Brunings in 1908 and Sluder in 1911 in the United "States developed similar equipment. Greenfield Sluder, an ENT doctor, in Saint Louis was not the first to use the guillotine-cutter for tonsillectomy, but he published a study, in 1912, in which he affirmed to have reached 99.6% of success in his surgeries through this technique (1,2). They all aimed to accomplish surgery as fast as they could, especially in children, for the account of the lack of anesthetic techniques." Retrieved from URL: http://www.internationalarchivesent.org/additional/acervo_eng.asp?id=395 Sluder's Tonsil Guillotine large size. This metal piece of tonsillectomy equipment was designed by Greenfield Sluder in 1911. The piece has generalised oxidation spots on its surface but mostly founded over the top retractile arm blade holder and handle, also has sulphated areas at the base of the handle surface with a bluish colouration. This piece has a screw attached on top of the arm as part of the adjustable blade retractile system.sluder, greenfield, tonsil, guillotine, tonsillectomy

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa)

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope

The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb

Prior to the first antivenom development in Australia, many of the snake men had a vast array of snakebite remedies they either used for themselves in the case of bites or pedaled to the public. Treatments such as ammonia, strychnine, chlorinated lime, potassium permanganate, suction caps, alcohol, gunpowder, petrol, toad urine, iodide swabs and pig face plant juice were some that were used and sold. The first antivenom produced in Australia was in 1930 for tiger snake bites. Subsequently, in response to public pressure, other antivenoms were produced. Taipan, 1955; Brown snake, 1956; Death Adder, 1958; Papuan black snake, 1959; Sea snake, 1961; and the polyvalent, 1962.Black box with hinged opening and gold leaf printed text on the top. Inside the box is lined with blue satin and velvet, and contains one (1) syringe with glass chamber and metal plunger and black rubber stopper, one (1) glass bottle with a label stating it contains chloride of lime, one (1) glass bottle with a label stating it contains pure alcohol and two (2) needles with metal connectors, one of which is broken. There is also a small wooden block with a groove in the top of it.Gold lettering on top of box: CHLORIDE OF LIME ANTIDOTE / FOR / SNAKE BITE / FELTON GRIMWADE & CO. / MELBOURNE.hydrochloride lime, alcohol, antidote, venom, snake bite

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Macintosh semi curved blade designed in a child size, with a light bulb attached to the blade and a hinge attached to the back side of the base. Several scratches and deep hit marks over its surface caused by its previous use. This piece also has visible old dust spots and stains. Its contact stud is in a well condition and does not has any inscriptions. macintosh, blade, paediatrics, light bulb

"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb

This object was displayed as part of the temporary Mask-Inhaler Exhibition during the Geoffrey Kaye Symposium, 29-30 January 2013.Laryngoscope penlite handle for infant Longworth fitting blades use, with a serrated grip on battery deposit, no batteries included. Top handle fitting screw is present. Minor scratches and hit marks are present over its surface. It has stamped the trade mark and place of manufacturing.Stamped on the top handle attachment place, REGD TRADE MARK / PENLON / [M] ADE IN ENGLANDhandle, penlon, longworth fitting handles, infant size handle

Magill type blade to fit Longworth handles adult size without light bulb. Attached hinge at the back of the blade. Visible hit marks mostly present at the back top of the blade and below. Worn contact stud on base and lateral side at the light bulb connection. Dust spots around the piece. It has stamped on the blade base the attachment type name.Stamped at the attachment base of the blade in cursive writing, Longworthlongworth, magill, blade, adult blades, penlon

“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon

J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen