Set of 10 + 4 unused sheets, hand written double foolscap folio (full foolscap sheet) ruled sheets which detail the various Acts, relating to Tramway Undertakings and Street Railways, that affected the MMTB from 1883 to 1956. Sheets have been pinned in to the top left hand corner. Set of 2 sheets - loose - the detail the Country Roads Act of 1928 and 1936. Set of 3 sheets - hand written notes regarding Acts.trams, tramways, mto co, cable trams, parliament, acts of parliament, order in council, regulations, mmtb, tramways

Tender document - 10 duplicated foolscap sheets pinned in top left hand corner, titled "Manufacture, Supply and Delivery of Uniforms and Caps - Conditions of Tendering, Contract and form of agreement etc - Contract No. 103.", closing 2/9/1920. Gives the general documentation for such tenders, a quantity of about 2000 uniforms and caps per year, general materials specifications, tunics, a list of prices to be provided for 12 different garments (conductors, gripmen and motormen). No drawings provided.trams, tramways, uniforms, tenders, contracts, gripmen, motormen, conductors, mmtb

Report - duplicated - 12 foolscap sheets pinned with a brass clip in the top left hand corner, titled "Statement by the Chairman (MMTB) to the Committee of Public Accounts of the Parliament of the State of Victoria", not formally dated, but c1927. Report looks at the establishment of the Board, operation of the cable tram system, failures, accidents, comparison with the electric system, costs, conversion of the cable car routes, a summary of the cable stoppages, issues with cable trams, shunting, ropes, accidents and operational matters.trams, tramways, mmtb, parliament, victorian government, finances, buses, cable trams, conversion, accidents

A marlinspike is a tool used in marine rope work it is shaped in the form of a polished metal cone tapered to a rounded or flattened point, it is used in such tasks as unlaying rope for splicing or untying knots. For drawing a marline tight and using a marlinspike hitch as well as for joining toggle ropes under tension in a belaying pin splice. Most marlin spikes are 15–30 cm long, but may reach 61 cm and more for working heavy cables and ropes. They are usually made from iron or steel, whereas fids, similar in shape and function, are formed from wood or bone. The marlinspike may be a separate tool or as an item on a pocket knife. Sailors who become proficient at knot tying, splicing, and sewing using the marlinspike are said to have mastered marlinespike seamanship, earning them the right to be known as marlin spikes or marlinspike seamen.A tool still very much in use today wherever a rope or cable requires joining, splicing etc the marlin spike tool design has not changed since first invented centuries ago as a sailors tool to splice and make repairs to ropes and cables on board a ship. This item gives a snapshot into the life sailors have on board sailing vessels past and present. Marlin Spike made of solid steel. Handle is bulbous and spike end is rounded.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlin spike

Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . Besides for peening (surface hardening by impact), the ball-peen hammer is useful for many tasks, such as striking punches and chisels - usually performed with the flat face of the hammer. The peening face is useful for rounding off edges of metal pins and fasteners, such as rivets. The ball face of the hammer can also be used to make gaskets for mating surfaces. A suitable gasket material is held over the surface where a corresponding gasket is desired, and the operator will lightly tap around the edges of the mating surface to perforate the gasket materialThis hammer is typical of the type used by early settlers in Moorabbin Shire c1900A hard faced ball & peen hammer, also known as a machinist's hammer,[ is a type of peening hammer used in metalworking. It has two heads, one flat and the other, called the peen, rounded.early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

Photo of Senator Barney Cooney (standing on left) with the recipients of two new wheelchairs. Senator Cooney represented the Department of Veterans Affairs when he presented the wheelchairs and a cheque for $7,000 to President George Woodward at Legacy House. The article in the Answer newsletter mentions: 'The grant of $7,000 will greatly assist Legacy's programs by covering the cost of bus hire needed for the regular outings organised during the year and the wheelchairs will provide additional assistance allowing more Junior Legatees to participate in activities.' After the presentation the junior Legatees went to the cinema and 10 pin bowling. Every month Legacy's handicapped dependents were invited to go on outing for take part in recreational and educational activities. These programmes aimed to develop independence and thus lessen the need for reliance on others for simple routine functions. Once a year there is a two week camp this also gave the mothers some respite. A record of the type of activities Legacy provided for the handicapped dependents of the Legacy families.Black and white photo of two wheelchair recipients at Legacy House.junior legatee outing, donation, hdc, ddc

Photo of Senator Barney Cooney (standing on left) with the recipients of two new wheelchairs. Senator Cooney represented the Department of Veterans Affairs when he presented the wheelchairs and a cheque for $7,000 to President George Woodward at Legacy House. The article in the Answer newsletter mentions: 'The grant of $7,000 will greatly assist Legacy's programs by covering the cost of bus hire needed for the regular outings organised during the year and the wheelchairs will provide additional assistance allowing more Junior Legatees to participate in activities.' After the presentation the junior Legatees went to the cinema and 10 pin bowling. Every month Legacy's handicapped dependents were invited to go on outing for take part in recreational and educational activities. These programmes aimed to develop independence and thus lessen the need for reliance on others for simple routine functions. Once a year there is a two week camp this also gave the mothers some respite. A record of the type of activities Legacy provided for the handicapped dependents of the Legacy families.Colour photo x 3 of two wheelchair recipients and the presentation at Legacy House.junior legatee outing, donation, hdc, ddc

The Tellatouch was developed in the American Foundation research laboratory and resulted from one of the first AFB research projects, a major effort in the mid-1940s to help deaf-blind people. The device helped end social isolation for hundreds of deaf-blind children and adults. The Tellatouch provides a means of communication between a sighted (or blind) person and a deaf-blind person who can read braille. The keyboard has three rows of ten keys each and a standard braille keyboard on the fourth row. At the rear of the machine is a round metal plate with the braille cell in the center. The deaf-blind person rests a finger on the braille cell. Pins rise to form the equivalent of the letter key that is struck. The body of the device covered in beige vinyl, with a hinged lid at the front which lifts up to reveal the keyboard. The lid is secured with a metal latch at the front.Beige vinyl machine with leather carry strapbraille equipment, assistive devices

Small, orange and white tin box with hinged lid for one hundred detonators.On lid: "Nobel No. 6. 100 detonators for rich explosives. Alfred Nobel. Thistle Brand. Manufactured in Gt. Britain. Glasgow" "6 6" on front and back panels, "For use wherever safety fuse is allowed" on left side panel and "Must be handled with great care and kept dry. The composition must not be scratched or pricked with a pin, nail, knife blade or other hard substance, as any act of this kind may cause explosion" on the right side panel.explosives equipment

1. Jacket - Khaki colour cotton twill fabric, brown colour, Bakelite shank buttons with raised map of Australia and lettering with metal cotter pins. Collar with two attached metal Rising Sun Badges; shoulder epaulettes with three officer's pips being "Captain" and "Australia" badge. Four front pockets with button down flap. 2. Belt - Khaki colour cotton twill fabric, metal buckle, plastic button and leather belt keepers. No Manufacturers information.uniform, army, ww2

These three badges were issued as fund raisers on Children's Day in 1918,1919 and 1941. The Children's Flower day arose out of the League of Young Gardeners established in 1916 to assist the war effort by encouraging children to cultivate garden plots at home and at school. The Children's Flower Day included lectures and lessons at school related to garden cultivation. Flower shows of produce grown at home and at school and street stalls were run by children to raise funds for the war effort.These badges are of interest as examples of the activities of children in Victoria to assist the War effort in World Wars.1 Cream coloured circular metal and enamel badge featuring Union flag, a wreath of red flowers and leaves around the edge on two sides and text . A clip is on the reverse. 2 Cream coloured oval plastic coated card badge featuring blue flowers and wattle blossom and text. A slot at the top for a pin so it may be attached to clothing. 3 Cream coloured circular badge featuring a six pointed gold star, a coloured image of a house and garden and text. A clip is on the reverse1 EVD CHILDREN'S FLOWER DAY 1941 on face. A.W. PATRICK. N. FITZROY. V. on rim 2 CHILDREN'S FLOWER DAY 1918 3 CHILDREN'S FLOWER DAY 1919 PEACE YEAR and symbol of an flattened semi circle with incomplete rectangle interlaced. children, flowers, war effort, warrnambool

TOC H was founded as a Christian organisation during the First World War in Belgium in 1915. Talbot House was a venue for respite from the war for soldiers and civilians. During the 1920s TOC H spread around the world especially to Commonwealth countries. In 1923 the Governor General of Australia wrote to The Reverend "Tubby" Clayton indicating that he and Lady Forster wished to endow a TOC H lamp, the symbol of TOC H in memory of their two sons who were killed in the war. The lamp symbol is a replica of the lamp used to provide light to early Christians who sought refuge in the catacombs of Rome. The cross of Lorraine is an indicator of its origins in the Ypres salient.The lamp is a symbol of an ongoing commitment of TOC H to spread light wherever it may be required. These badges are maintained as mementos of the Warrnambool branch of TOC H which operated from a sandstone building in Koroit Street Warrnambool. It was active during the middle decades of the 20th Century .1 Octagonal metal and enamel badge featuring a gold coloured oil lamp and cross on a green luminous background with rays emanating from the lamp. The badge has a gold edging. The reverse has a pin clip and text .2 and .3 Octagonal metal and enamel lapel badge featuring a gold coloured oil lamp and cross on a royal blue background. The badge has a gold edging. The reverse has a horseshoe shaped device to allow the badge to be secured in the buttonhole of a jacket. .1Indecipherable .2 Stokes and Sons Melbourne .3 2849toc h, tubby clayton, lord forster

This is an early 20th century example of a chronograph, a watch with stopwatch functions. Chronographs date from the early 19th century and were used particularly in aviation, astronomy, diving, automobile and other racing contests and artillery firing and with more sophisticated designs are still used today.This item has no known local provenance but is retained for display purposes because of its age and its exceptional qualityThis is a chronograph, a display watch which also has a stopwatch function. It has a white face with black markings and Roman numerals and a gauge around the outer circle with numbers from 0 to 300. The face is covered with a glass frame. One hand and its pin are loose in the glass. The watch case is gold-coloured with a heavy ornamental pattern around the sides. At the top of the case is a ring for attaching the watch to a chain or belt. The button on the side for working the stop watch mechanism no longer functions.Celebrated Chronograph Specially Examined Swiss Madevintage chronographs, warrnambool history

This medal is one of only a few medals donated by a group of generous gentlemen as tokens of their appreciation of the talent and industry of high achieving students in the years 1869 - 1870. The medal was awarded to Charles J Henderson when he completed his Matriculation Examination at the very young age of 13 years. The 1869 College annual report states that this examination, which granted entry into Melbourne University, was held in Ballarat for the first time in 1869. Candidates had to pass in at least six of the nine possible subjects in order to pass. Charles Henderson (born 3/02/1856) was the eldest son of the Rev. William Henderson of St Anderw's Kirk, Ballarat, distinguished founder of Ballarat College. Charles was only the third student enrolled at Ballarat College in July 1864. The Ballarat College annual report 1869 states the medal was awarded in appreciation of his 'success in passing so creditably the Matriculation examination at the age of thirteen years'. This medal has historic significance because it dates from the first decade of the history of the College. It has social significance because the recipient was the third student enrolled at Ballarat College, the eldest son of the founder of the College. The medal is unique and is one of only a few privately donated between 1869-1870 by a group of gentlemen affiliated with the college.This gold-plated round-shaped medal has front embossed with Minerva head, name of school and school motto. The rear of the medal is inscribed with names of medal donors. There is a straight metal pin hinged to the right side of the rear of the medal. There is a small catch attached to left side of the rear of the medal. The side edge of the medal is inscribed with name of the recipient and title of the award. The medal is housed in a rectangular cardboard box and nestled in cotton wool.The box has a blue lid and white base.Embossed around inner edge of medal front "Studiis Claritudo Venit. Ballarat College". Inscribed on rear of medal 'Presented by T. Cowan Esq.. G. Duncan Esq.. / A. Smith Esq.. W. P Martin Esq.. / J. Bell Esq..J. williamson Esq.. / S. Pike Esq..'; Maker's mark stamped below rear side inscription 'J.T.S'. Inscribed around circumference of medal 'C. J Henderson Matriculation Examination, Nov 1869'.medal, minerva, matriculation, 1869, c j henderson, thomas cowan, james willliamson, gilbert duncan, adam smith, w p martin, john bell, s pike, matriculation examination, gold medal, ballarat college school motto, ballarat college, school motto, studiis claritudo venit

Part of Flight Lieutenant Ian A. 'Joe' Lyons Collection. See Catalogue No. 5374P for details of his service record.Collection of five metal, enamel and plastic lapel badges. .1) Metal and enamel commemorative badge for the 50th Anniversary of the end of WW2. Features gold coloured lettering and a sepia toned photograph in the middle. .2) Metal aircraft shape on a stick pin. .3) Metal biplane shape with press clip fastener. .4) Red and white plastic Canadian flag with press clip fastener. .5) Metal and enamel badge featuring an airplane and gold lettering. Press clip fastener on back..1) Stamped on back: 'PATRICKS, (02)6304700, SYDNEY'.badge, australia remembers, ww2, flag, ian a. 'joe' lyons

Sgt Jack Grinton No 1043, 38th Batt AIF. Part of the Grinton collection which included hundreds of negatives and developed photos that he took during the War. Refer Cat No 1280 for service details. Refer 1317P, 1320P. .1) RSL membership badge, two figures in centre, crown at top with membership clip "75" denoting membership paid 1975. Brass plate, pin backing for clothing. .2) Badge, polished gold colour. Small map of Australia over oval shape with soldier in centre. Surrounding are scrolls and leaf arrangement. Engraved on rear. Attached to black silk material with 2 metal shields. .3) Black silk material ribbon with one metal shield as in .2..1) "V64223" .2) "Presented to Sgt JW Grinton from Tragowel friends for duty bravely done. Great War 1914-1918"numismatics - badges, societies-rsl, metalcraft-brass/copperware

A sailing block is single or multiple pulleys with one or more sheaves that are enclosed in an assembly between cheeks or chocks. In use, a block is fixed to the end of a line, to a spar, or a surface. A rope line is reeved through the sheaves, and maybe through one or more matching blocks at the far end, to make up what's known as a tackle. The purchase of a tackle refers to its mechanical advantage. In general, the more sheaves in the blocks that make up a tackle, the higher its mechanical advantage. The matter is slightly complicated by the fact that every tackle has a working end where the final run of rope leaves the last sheave. More mechanical advantage can be obtained if this end is attached to the moving load rather than the fixed end of the tackle. Various types of blocks are used in sailing. Some blocks are used to increase mechanical advantage and others are used simply to change the direction of a line. A ratchet block turns freely when a line is pulled in one direction but does not turn the other direction, although the line may slip past the sheave. This kind of block makes a loaded line easier to hold by hand, and is sometimes used on smaller boats for lines like main and jib sheets that are frequently adjusted. A single, large, sail-powered warship in the mid-19th century required more than 1,400 blocks of various kinds and sizes. An item from an old sailing vessel from the late 19th to early 20th century, unfortunately, the item cannot be identified as to what vessel it belonged to. It does however give an insight into a piece of sailing equipment that's design is still in use today on pleasure sailing craft. Wooden closed spelter double rope block with two pully's between sheaves, block has metal frame around outside of the sheaves and 4 metal pins, 2 each side of the frame at top and 2 at bottom, joining the sheaves together. The shaft between the sheaves is also wooden. Remnants of orange and black paint on outside of block. Shafts are chipped, wood has borer holes. (NOTE: Block was rediscovered after relocating objects to new storage area)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sailing ship, pulley, block, sheave, ship equipment, rope block, sail rigging

This type of mobile spring weighing scales were in high use before legislative Weights and Measure standards where in force throughout Australia. This was in a time when a "mans word and handshake" was his legal document. It was a time, especially in rural areas that the term "she'll be right" was extensively used and these types of scales (the accuracy over time) would produce a near "enough is good enough" measure. These scales are very significant for the rural produce within the Kiewa Valley. Rural produce such as hay milk and butter tubs,tobacco bundles could be easily weighed (in relatively smaller packages) for both markets and for use within the valley.This spring scale (!/2 Once to 4lb) was used as general weight scale. Because it is spring loaded the accuracy would fade over time and by over weighted loads. The spring enclosure is made from cast iron painter black. There is an iron ring at the top (attaching/holding) and an iron hook at the bottom (holding). There is a brass front plate with engraved markings(on the left side) running from top to bottom and a movable pin weight indicator running in the middle indicating the weight of the item being weighed.At the front top"SALTER'S SPRING BALANCE 4LB BY 21/2 OZ" underneath "No 1A" At the bottom in smaller print "MADE IN ENGLAND PATENT"weighing instruments, spring balances

The badge represents the Emergency Services section of the Red Cross Society. The Australian Red Cross was formed on 21st August 1914 at the outbreak of the First World War. The badge was made by K.G. Luke Pty. Ltd. in Melbourne. Kenneth George Luke, began work as an apprentice in 1910 at Stokes & Sons Pty. Ltd. in Melbourne and stayed with the company for eleven years. He then became a partner in a metalworking business, wholly owning this successful Carlton business in 1925. From 1935-1945 his products included silverware and supplies for military needs. The firm was K.G. Luke Pty. Ltd. by 1936, making buttons, badges, brooches, and heated food trolleys at his office and factory in North Fitzroy, and selling from his showroom in Elizabeth Street Melbourne. His customers included the Australian Red Cross, Victoria Police, TAA Airline, and the military forces of Australia and the United States. Seventeen years later the company was K.G. Luke (A/Asia) Ltd, then twenty-three years on it was Luke Ltd. until in 1983 it was taken over by National Consolidated Ltd. Sir Kenneth George Luke was also a V.F.L. football administrator. This badge is one of a set of badges collected by Dr W R Angus from the organisations in which he was involved. The set of badges is now part of Flagstaff Hill’s comprehensive W.R. Angus Collection, donated by the family of Dr W R Angus, surgeon and oculist. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Forces. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This badge is significant for connecting Doctor Angus with organisations that he supported. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.Badge, rectangular metal and enamel badge, with a blue band across the top and bottom, and a white and gold band in the middle similar to a belt with the buckle of a red cross. The badge has a horizontal pin on the back. Inscriptions on top and bottom bands and on the reverse. It is the badge of the Red Cross Emergency Service, made by K.G. Luke of Melbourne.This badge is part of a set of badges collected by Dr W R Angus. the set represents organisations that he was involved in, and is part of the W.R. Angus Collection.Printed on front; “RED CROSS” above “EMERGENCY / SERVICE”. Embossed on back “8029” “K.G. LUKE / MELB” flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, w.r. angus, badge, organisation badge, flagstaff hill maritime museum and village, australian red cross, charity, volunteer organisation, red cross, k.g. luke pty. ltd., kenneth george luke, north fitzroy, stokes & sons, w.r. angus collection

Hugo Wertheim (1854-1919), was a merchant and manufacturer and was born on the 12th July 1854 at Lispenhausen, in the German electorate of Hesse-Kassel, son of Meyer Wertheim and his wife Minna, née Heinemann. Hugo reached Melbourne in October 1875. He soon began advertising, from premises at 39 Flinders Lane East, as agent for his father's cousin Joseph Wertheim, a well-established manufacturer of sewing machines. Hugo returned to Germany where he married Joseph Wertheim's daughter Sophie Emilie (1864-1953) on 30 August 1885 at Frankfurt. the couple then came to Melbourne. In a short time, with extensive advertising, Hugo established a substantial business, selling sewing machines, bicycles, pianos and other mechanical devices, under brands such as Wertheim, Electra, Planet, Griffin and Hapsburg. He also mounted elaborate displays at agricultural shows and in 1901 at the Pan American Exposition, Buffalo, United States of America. O. C. Beale worked with him before setting up his own piano business in New South Wales. Hugo continued to own 25 per cent of one of Beale's companies, which became Wertheim's Queensland business. In 1908 Wertheim opened a large, innovative piano factory at Richmond, Melbourne, intending to produce 2000 pianos and player pianos annually, predominantly using Australian materials. In laying the foundation stone, Prime Minister Alfred Deakin observed that “few men with such opportunities for a life of ease would have embarked on such an enterprise” Hugo died of chronic hepatitis on 11 July 1919 at his home at South Yarra, his wife, two daughters and three sons survived him; Herbert Joseph (1886-1972), the eldest, continued the business. Rupert became a share broker and went on to represent Victoria in inter-State tennis in 1913-27 and Australia in Davis Cup matches against Czechoslovakia in 1922. The piano factory closed in 1935, becoming a Heinz food processing plant and in 1955, GTV Channel 9 studios and offices.Early Australians had to be self-reliant in regards to making and mending their clothes and utensils. This sewing machine was one of many items used that exhibit the skill and craftsmanship of the women in these early families. A sewing machine was a necessary part of each home and this item demonstrates how women of the time managed had to become self-reliant in the repair and making of their families clothes to make their household budgets go further.Wertheim sewing machine in carry case, hand operated with two spindles, handle with locking pin, which turns lever between spokes of main handle, hand brake. The machine is table-mounted with a Turkish walnut base. The base can be attached to a cast iron table with a foot treadle as an optional extra. The walnut base has marquetry to the front set out as a measure for material. There is also an accessory box inside the carry case containing 20 additional items for use with the machine. Wertheim brass trademark badge riveted to the body of the machine of a crouching dwarf with a hammer with the name of the company Wertheim and Frankfurt. Gold filigree decoration in gold paint adorns the main body of the machine. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, hand operated sewing machine, crank handle sewing machine, wertheim, dressmaking, taylor, domestic, clothing, hugo wertheim, joseph wertheim

The piece of oak wood sample inside the case was obtained from Mr. H Cooper during the time he served as a shipwright for the British Royal Navy on Nelson’s flagship, HMS Victory, in 1891. By that time the H.M.S. Victory was around 100 years old having been built in 1765 and was currently in dry dock undergoing restoration. Cooper’s skills as a shipwright would have been well employed during this period. HMS Victory was and still does undergoing continuous restoration to preserve her for display as a museum ship, due to the vessel's significant naval history. It was during that time of early restoration that Cooper obtained the piece of Oak from HMS Victory believed to be from the ships hull. Cooper was in Australia in September 1891 serving on the HMS Wallaroo, a British Auxiliary Squadron commissioned to serve as part of the British Royal Navy contingent, tasked to operate in Australian waters. The photograph included with the donation of the wood sample is a portrait of Mr H Cooper taken in 1895 in Sydney. The inscription on the photograph describes him as a skilled shipwright from the H.M.S. Wallaroo, depicting Cooper as a young man in Royal Navy uniform, with the emblem of a petty officer third class. While Cooper was stationed on the H.M.S. Wallaroo in Sydney he presented the display case, containing the wood sample from H.M.S. Victory, as well as the exhibit labels to Charles Harding, ("Chas") late of the Royal Australian Navy. Harding had been based at the H M Naval Torpedo Depot at Williamstown, Victoria. Although not mentioned, it is believed the two men met whilst serving together in Australia in their respective assignments. It could have been a retirement gift from Cooper to Harding with the photograph of Cooper likely included with the case, and gifted to Harding in 1895, as the date on the photograph indicates. One of the exhibits labels indicates that Harding had the item on display whilst serving at the Naval Torpedo Depot in Williamstown. The label indicates: "This piece of Oak is part of the hull of H.M.S. “Victory” Lord Nelson’s renowned Flag Ship, which took such a prominent part in the Battle of Trafalgar. 21st October 1805. Exhibited by Charles Harding, H.M.V. Naval Torpedo Depot, Williamstown.” After Charles Harding died in 1931 the case containing the sample of oak from H.M.S. Victory was donated by his son Reg Harding to Mr. Murphy in 1962. The display case has since become a treasured item at Flagstaff Hill. A newspaper article dated 1905 included with the donation mentions that the city of Hamilton in Victoria was shortly expecting a mounted piece of the H.M.S. Victory, to be included in the city’s commemoration of the centenary of the "Battle of Trafalgar". Battle of Trafalgar: On October 21, 1805, twenty-seven British ships of the line led by Admiral Lord Nelson aboard HMS Victory defeated thirty-three French and Spanish ships of the line under French Admiral Villeneuve. The battle took place in the Atlantic Ocean off the southwest coast of Spain, just west of Cape Trafalgar, near the town of Los Caños de Meca. The victory confirmed the naval supremacy Britain had established during the course of the eighteenth century and it was achieved in part through Nelson's departure from the prevailing naval tactical orthodoxy of the day. Conventional practice at the time was for opposing fleets to engage each other in single parallel lines, in order to facilitate signalling and disengagement, and to maximise fields of fire and target areas. Nelson instead arranged his ships into two columns to sail perpendicularly into the enemy fleet's line. During the battle, Nelson was shot by a French musketeer and he died shortly before the battle ended. Villeneuve was captured, along with his ship Bucentaure. He later attended Nelson's funeral while a captive on parole in Britain. Admiral Federico Gravina, the senior Spanish flag officer, escaped with the remnant of the fleet. He died five months later from wounds sustained during the battle. It was prior to this battle that Nelson had issued his now-famous final orders to his ships in 12 separate flag-hoists “England expects that every man will do his duty”. This wood sample is historically significant for its association with Admiral Lord Nelson the Battle of Trafalgar. Through Nelson’s leadership and unorthodox battle tactics, he secured not only a victory against the French and Spanish but reaffirmed Britain's naval supremacy opening the way for Britain to continuing the policy of colonisation of many countries including Australia.Wood sample adhered to the base of a hinged wood and glass display case. Wood is a sample of oak taken from the hull of Vice-Admiral Lord Nelson's flagship, the HMS Victory, built in 1765. The case also contain two exhibit labels pinned above the wood sample. Other items donated with the display case, and relating to the wood sample: an 1895 photograph, a 1905 newspaper clipping, a 1962 donor's letter (two pages), and a handwritten exhibit label with a border of red lines. Photograph Front: printed- "Herbst" "28 Oxford Street, Hyde Park, Sydney", handwritten - "Mr Cooper", "see back". Back: handwritten - "Mr H Cooper, skilled shipwright, H.M.S. Wallaroo 1895" Exhibit labels still in the case: Left: handwritten- “PIECE OF OAK FROM THE HULL OF H.M.S. VICTORY”, Right: typewritten- “This piece of Oak was originally obtained by Mr. H. Cooper, skilled shipwright on H.M.S. “Victory” & afterwards on H.M.S. “Wallaroo” on the Australian Station in 1895, when he presented this exhibit to me. Chas. Harding, Late Victorian Navy.”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, oak, hms victory, vice-admiral lord nelson, horatio nelson, lord nelson, oak piece, piece of oaknelson, battle of trafalgar, maritime technology, ship relics, 18th century warship, british royal navy, h cooper shipwright, hms wallaroo, herbst hyde park sydney, charles harding, hmv naval orpedo depot williamstown, sir home popham’s telegraphic code, admiralty official day signal book

Victorian Railways certificate of competency as a telegraph operator. Certifying that James Henry Badham is qualified to perform the duties of Operator in the third class, dated 27.6.1917. Small certificate number 2894, accompanying medium sized memo pinned to certificate, dated 24.4.1933 signed A Ashton - acting chief mechanical engineer. Memo for fireman J Badham commending him on his performance in achieving excellent results in the Victorian Railways Institute course of engineering over the previous three years.document, memo, railway, a ashton - acting chief mechanical engineer / victorian railways certificate of competency as a telegraph operator

Manilla envelope [a] with handwritten caption,'Agreement dated October 7th 1947, Neon Electric Signs, White & Dunstan, McCallum St, Swan Hill, rent £1/12/6 monthly. [b] Pinned Official letterhead notepaper of ' Neon Electric Signs' addressed to Managing Director Cohn Bros, Victoria Brewery. Re File No 5382. Acknowledging letter of Dec 10th, requesting copy of agreement. [c] Rental & Maintenance Agreement between White & Dunstan Swan Hill.bendigo, industry, cohn bros brewery

Aulsebrook Collection: Bendigo and District Tourist Association Board Meeting minutes 24th February 1970 (a) and Commercial and Industrial Static Display Centre proposal (b) a) Bendigo and District Tourist Association Board Meeting Minutes, February 24th. 2 pages, typed. Correspondance, Finance, General buisness etc. b) Commercial and Industrial Static Display Centre Proposal. 2 pages, typed. -small note pinned to the front, notice for next meeting for the tourist association (March 24th 1970)

Document. Greeting Cards. White card with shaped, embossed edges with some cutouts. On the front is a shaped embossed piece of celluloid held on with a bifurcated pin in each corner. It has a large green leaf near the top with some smaller green leaves and pink flowers. Dinna Forget is embossed on an angle across the centre and has had glitter on it. At the bottom is more pink flowers and a bunch of blue flowers. It has a light olive coloured ribbon tied in a bow on the left.person, greeting cards, malone collection, malone collection, greeting cards

Group of paper pinned together of various experiments. Items include Tail light invention for Defence Dept. 18/9/41, Heat of glass, Refractive Index Tests on Melbourne Tap Water 31/7/42, Research Data, Manufacture of the Buoys 18/1/43, Specifications 1/12/42, List of substances with their Atomic No., Symbol, Atomic Weight, Melting Point and Year of discovery and a hand drawn diagram for an experiment. Bendigo Electronic Company of Australia Pty Ltdsciences, instruments - general, scalebuoy, bill ashman collection - correspondence, bendigo electronic company of australia pty ltd, defence dept, capt slattery, f a stevenson

Documents (2) pinned together Messages dated .28.3.1892, 1.4.1892 and 31.3.1892 Memo to Const. Meager seeking information re John Lynch, late of Terrick Terrick, said to be a relative of the Lyhnches residing at Mitiamo. On rear of memo ' John Lynch brother to Matthew and Patt Lynch has notyet returned to this colony. He is supposed to be living in the dist of Dubbo N.S.W., signed C.F. Major, Const. 2908, Kerang' Connelly, Tatchell & Dunlop response attached re information enclosed above.business, legal, connelly, tatchell & dunlop, connelly, tatchell & dunlop, john lynch, terrick terrick, mitiamo