RSL badges of two different sizes relating to Imperial League pre WW2.1. Badge - White shield with crown on top with No. 54 on a green background.. Inscription within a blue circle and inside on gold background are two armed soldiers standing at ready. Banner along bottom of shield with "Australia" written on it. Two rings on back with no pins to attach. 2. Badge - White shield with crown on top. Inscription within a blue circle and inside on gold background are two armed soldiers standing at ready. Banner along bottom of shield with "Australia" written on it. On back is a round brass plate with two clips on back.1. Inscribed "Imperial League - Returned Sailors, Soldiers. At bottom "Australia". On back No. B8396 and maker "W. Bishop" and "Copyright". 2. Same inscription as one. A no 54 in box on top.rsl badge, imprial league

Badges - The Met - personnel employee numbers - Three parts - holder made from gold coloured plastic with a metal Met (the flying one) logo fixed above the holder and fitted with a pin. A engraved plastic, gold front, black rear number was then inserted and glued into the holder as shown by badge number 1041 where the number is loose. Two items - numbers 017 in original plastic packet and 1041. See Reg Item 3777.3 for another example. Additional badges - Nos 863, 591 and 5432.trams, tramways, badges, the met, mta, personnel, employees

Report or Legal Opinion dated 7/10/1918 from the Solicitor to the Hawthorn Tramways Trust HTT regarding questions put to him by the Board regarding actions of the Engineer Manager Mr. McCarty. Comprises 4 Foolscap sheets with a half quarto sheet pinned together on the letterhead of G. F. A. Jones Solicitor of 47 Queen St Melbourne. Reports of the re-use of sub-standard road materials (metal), instructions issued by the Engineer, relevant clauses of the specification, dispute resolution, any possibility of fraud or collusion.In pencil on the first sheet "Finance or Traffic Committee"trams, tramways, htt, hawthorn, trackwork, construction, engineers

Tender document - single foolscap sheet - "Supply and Delivery of Trip Slips Contract No. 86 - Tender form". Dated 4/3/1920. Delivery to Head Office. Tender for 8,000,000 trip slips. Tendered for the cost per 1000 of 3d Salmon 2d short white 2d "up" long white 2d "down" long white 1 1/2d pink 1d green Gives the various quantities to be supplied. No drawings provided. 4 copies held - pinned in top left hand corner.Handwritten notation in top right hand corner - "File"trams, tramways, tenders, contracts, mmtb, cable trams, tickets

Clothing. Royal blue, single breasted blazer, with revere collar and three brass button front fastening. These three buttons and two smaller buttons on the sleeve cuffs, have the round sun symbol of Japan, and the Olympic Rings impressed into them. The breast pocket, with rounded lower corners has a cloth badge, 9.5 cm long X 6.5 cm wide, which is embroidered with a 5 cm diameter ball (of the sun) and five Olympic Rings in navy blue embroidery. One 20 cm long vent in lower centre back seam. Padded shoulders. Fully lined sleeves and front, while back is only lined across the shoulders. One inside pocket on each side front, has a button closure. Two pockets-22 cm long X 17 cm wide on either side of front, at lower edge. Single breasted. One small 1.4 cm diameter button, badge or Olympic pic, pin fallen from a blazer pocket. The button badge has a bronze like appearance, with impressed Japanese type characters on the surface. A pin type clasp at rear, thought to be a metal badge.All on inside of garment,right hand front. Toray® Toray Rayon Co. Ltd.Toray TETORON ® Riverloft ® Yarn Tailored by Mitsukoshi, Tokyo 1964. O Gold symbol Japan Olympic Rings 1964. Button have on underside: Tokyo 1964.costume, male, tokyo olympic blazer 1964

Clothing. Woman's black silk brocade bodice. High round neckline with full length front opening fastened with 13 metal hooks and eyes. Bodice fully lined with black cotton fabric and shaped in at waistline. Seven casings for boning - two on each side of front, one on each side seam and one at centre back (18cm X 1.3 cm). Casings reinforced with bright yellow cotton stitching. Cotton tape casing at hemline at waist. Long straight set in sleeves extending to a rounded shape over the back of the hand.Cross over front outer layer fastened with three hooks and eyes at the top and one at the waist. Panels of black lace run from shoulders to waist on either side of a centre insert panel (12 cm X 15cm) with five horizontal strips of velvet ribbon. Below the insert are three 7-9cm wide black lace ruffles with khaki green embroidery (Jabot effect). The back has a deep V shaped insert of vertical pin tucks and black lace, from across the shoulders to centre back. Pin tucks also on either side of front neckline.costume, female, woman's black silk brocade bodice

Owned by Jean Young - born Falkirk, Scotland, 1811. Believed to be listed in Falkirk Census in 1851. Married William Hill. Possibly sailed in 'Tempest'. Died at Dunolly, Victoria.Black paper mache sewing work box. Lid inlaid with abalone. General design has been highlighted in gold paint. The box is lined with pale lilac and white satin, lid unlined. Top panel and bottom edge decoratively shaped - slightly domed lid and front panel decorated in a similar manner to lid. Box contains needles, threads, buttons, thimbles and a pin cushion as follows:- Peri-Lusta .03 Crystal Rayon Spun Mending Thread .04 Flora McDonald Needle Packet .0 |Packet of Needles W.Woodfield & Sons .06 Mauve satin needle case .07 Tortice tatting schuttle .08 Round wooden box with 5 pearl buttons and 2 cloth covered buttons .09 Square wooden needle case with red velvet lining and leather strip and brass clip .10 Round lace pin-cushion with very fine ecru crochet dark green lining .11 Unknown handle of black composition with bone end and four inlaid lines with dot at end ,12 Ivory stiletto with screw top. Total of 13 parts to the object.domestic items, sewing, handcrafts, equipment

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

Hair nets were a popular hair accessory in the 1940’s for both daytime and work. They were a rayon or cotton crocheted net fitted with a headband. The band was worn around the top of the head and all of the hair would be encased in the snood. The band would have to be pinned in place. Many women of the 1940s and 1950s went to the beauty shop once a week to have their hair "done," then slept in hairnets every night to keep their "do" in place until the next visit. These hair nets were worn by Marjorie Burton. Marjorie Burton ( nee Whiteman), born 12 June, in Birmingham, England came to Orbost in 1995. In England she did office work – typing, shorthand and secretarial work - in accountants’ offices and also trained as a comptometrist with Burroughs in London. She came from a middle-class working church-going family. Her mother was a milliner who made manyof Marjorie’s clothes, hats and outfits. Marjorie married in 1938 to a salesman who later became a mechanic in the R.A.F. during WW11. These items are examples of women's hair fashion during the mid 29th century.Five women's hair nets. One is pale green and the others are brown.accessories hairnets-snoods burton-marjorie

Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The badges form part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration.The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.The use of common symbols for a range of purposes is sometimes a feature of wartime and post-war fundraising buttons. Like the ‘Hospital Day 1919’ badge, the ‘Come Back to God’ badge is within a seven pointed star on a dark blue ground with sprays of wattle; attempting to harness nationalism with religion.Come back to Godbutton

Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The button forms part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration. The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.Round metal button in red, white, blue and gold showing a sun setting over the sea with words printed in red around border and on lower outer rim.hospital day, patriotic buttons, first world war (1914-18)

An example of a badge issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $100. It is possibly a modern issue. This style recreates high donation value badges from the 1960s. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The pin was donated back to Legacy from the family of Marjorie and Jacobina (Jackie) Bristol, sisters who were both junior legatees in the 1930s and 1940s after their father passed away, he was a World War 1 veteran. Jacobina later became Jackie Wood and passed away in April 2020. Marjorie became Marjorie Bachmann and passed away in 1986. Also donated were a photo of the girls at calisthenics classes, a green tunic uniform, a junior legatee certificate, a souvenir handkerchief from the 90th anniversary celebrations and a $100 Legacy badge. These are catalogued separately at 01948 to 01952.An example of Legacy badges that were sold to raise money for Legacy's work.Legacy Appeal badge with the Legacy torch, it is made of gold coloured metal with teal enamel around a torch and wreath. It is a small rectangular shape. Badge has a post and a separate butterfly clutch.Embossed '$100' on reverse.legacy appeal, fundraising, badge week

Melbourne Tramway & Omnibus Co. Bell Punch No. D406. A heavy nickel or chrome plated steel ticket or fare strip canceling / registering mechanism used on Melbourne cable trams. When a fare was sold, the bell would ring advising the passenger that their fare have registered. "An ingenious device resembling in principle the ticket punch of a railway porter. It is carried by the conductor who wears pinned to his coat a 'trip-slip'. He punches this once for every fare received; the action is simultaneously registered on a dial inside the punch and bell rings to appraise the passenger of the fact. The punch is provided with a patent lock, the secret of which is known only at headquarters and effective system of check is thus secured." (" A story of the Melbourne Cable Tramway System" - page 54). Used by the MT&O and MMTB until 1922/23 when replaced by the check ticket system. Manufactured by the Railway Register Manufacturing Company. Has "MT&O Co. ..." stamped on one side along with patent dates.Demonstrates the equipment used by the Melbourne Tramway & Omnibus Co. to register fares and provide an accounting method.Nickel or chrome plated steel ticket punch, used by the Melbourne Tramway and Omnibus Co. stamped "MT&OCo" and "D406", c1885.ticket punch, tramways, trams, bell punch, tickets, fares, cable trams, railway register manufacturing company

This map was produced by Richard Francis Tunley and given to the Victorian Braille Library for use by it's patrons. Mr Tunley was a prolific Braille map maker as well as producing other items for blind and vision impaired children, advocated for compulsory education for blind and deaf children and established the Queensland Braille Map and Model Club. Leading by example, his maps were treasured by those who used them and were an outstanding piece of craftsmanship. In this example, the metal cylinder sits on a wooden base and can be turned via a handle in the wooden top or rotating the sides. A brailled red metal plate occupies the bottom third, and large continents have a metal plate, cut to shape, upon which braille country/continent names are placed. Major rivers are traced through raised lines in the metal continental plates, twisted wire traces shipping routes with associated brailled metal plates, raised metal pins in some major locations and more explanatory plates sit in various oceans.1 metal cylindrical map with tactile markersCommercial & Strategic Map of the British Empire Presented to the Victorian Braille Librarybraille library of victoria, r.f. tunley

Medals were all awarded to soldiers returning from active service that identifies campaigns in which they served. Awarded to George Bailey Jackson No 2172 AIF. Refer 3446P for his Service details. Set of 3 WW1 service medals court mounted. 1. The 1914-15 Star - Red, white & blue ribbon with gold medal, star shaped, crown on top and crossed swords. 2. British War Medal 1914-1920. Orange ribbon with blue and white edges. King George on front of round silver medal, and mounting horse on back. 3. The Victory Medal. Purple, green, yellow and red ribbon, gold circular medal with angel on front. Inscription on back. Brass pin on back of blue velvet mount.1. 1914 Star has year 1914-15 Inscribed. 2. British War Medal - Inscribed "Georg IVS Britt. OMN: REX ET IND: IMP. 3. Victory Medal - on back -"The Great War for Civilisation 1914-1919. The name, rank & unit of the soldier is also stamped on each medal.passchendaele barracks trust, ww1 service medals, g. b. jackson

The badge with two central figures is pre WW2 when there was no RAAF..1) Badge, RSL membership, metal. Top has crown, 2 figures centre, blue circle around figures with "Returned Sailors and Soldiers Imperial League" under red scroll is "Australia". Rear has 2 lugs and pin. Badge is number stamped on rear. .2) Badge, RSL membership metal top has crown 3 figures centre blue circle around figures with "Returned Sailors, Soldiers and Airmens". Under is scroll in red with "Imperial League Australia. Rear has 2 lugs, Badge is number stamped on rear..1) "V4715" .2) “Badge remains the property of the League 2566”badges, membership, rsl

This print was an 1885 Christmas gift from the publishers of the Australian Town and Country Journal to their subscribers. At that time Queen Victoria was 65 years old although she may not have been that age when the portrait was painted. The print shows Queen Victoria’s signature in the bottom right corner. It cost sixpence per copy and operated from 1870-1919. The Australian Town and Country Journal was printed weekly, on Saturdays, in Sydney. The edition on December 26, 1885, contained 51 pages. The Journal claimed “Circulation Ten Thousand Copies, Greater than any other Weekly in Australia.” The frame of the print has a solid back of thick timber panels and is crudely made. The edges of the frame appear to have an underlying plaster base that has been covered with a layer of wood. The corners are reinforced with metal protectors. The subject of the print is Queen Victoria, Queen of the United Kingdom of Britain and Ireland. She was born as Princess Alexandrina Victoria of Kent on May 24, 1819. She became Queen on June 24, 1837 when King William IV died. She married Prince Albert of Saxe-Coburg and Gotha on February 10, 1840. Queen Victoria lived and reigned until her death on January 22, 1901, at age 82 years, after reigning for sixty-three years and seven months. This portrait is significant historically for its origin as an inclusion the Australian Town and Country Journal, a late 19th century Australian weekly newspaper, in circulation for almost fifty years. The portrait gifted to the newspaper’s subscribers is historically significant as an example of the connection between the people in the British Colony of Australia, with the value and respect held for the Queen of the Colony. The frame of the portrait, of solid and protective construction, shows the value that the owners placed on this portrait.Print behind glass in a brown wooden frame; coloured print of a portrait of Queen Victoria, made in watercolours. The Queen is wearing a blue sash, crown, and white ribbon pinned to the sash along with a cameo brooch and Royal Emblem. The portrait has an oval floral border of roses in pastel colours. Text is printed outside the border, as a title above and a signature below, in the lower right corner. The back of the frame is made of heavy timber panels with holes for attaching wire. The timber frame is over a white layer of soft substance, perhaps plaster. "Presented to the Subscribers of the Australian Town and Country Journal, December 25th 1885" “Victoria R”flagstaff hill, warrnambool, flagstaff hill maritime village, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, queen victoria, princess alexandrina victoria of kent, portrait of queen victoria, australian town and country journal, presented to subscribers, 1885

William Melrose volunteered as an oarsman in the Portland Lifeboat on the second and successfil attempt at rescue when he rowed manfully through the breakers. He was awarded a Silver Medal and [pound mark]12.10.0.Paper certificate mounted under glass and framed. Frame is carved wood, stained brown. Top corner is a carved scotch thistle, bottom corner has carved anchors. Centre of each side has a cavity for the medals. At the bottom centre is the Admella Relief and Reward Fund Draft certificate of reward to William Melrose Seaman 'Lady Bird' Melbourne Nov 12th 1859. Photograph of William Melrose in uniform with his two medals pinned to his jacket. A coat of arms is carved at the top centre with the motto "PER-MARE-PER-TERRAS".Front: Admella Relief and Reward Fund Draft certificate of reward to William Melrose Seaman 'Lady Bird' Melbourne Nov 12th 1859. Services rendered - volunteered as an oarsman in the Portland Lifeboat on the second and successfil attempt at rescue when he rowed manfully through the breakers. He was awarded a Silver Medal and [pound mark]12.10.0. Back: (no inscriptions)admella, shipwreck, portland lifeboat, rescue, reward

Radio Telephone was minuted during the war. It was approved in 1944 for State Electricity Commission of Victoria use only. It was completed by the end of 1946. Used by the State Electricity Commission of Victoria at Bogong during the construction of the Kiewa Hydro Electric Scheme to connect with head office in Melbourne. It allows one conversation at a time using traffic controls in an unusual system of radio telephone providing communication. At the time it was unique in Australia and installed by the S.E.C.V. technicians. It provided an unattended shortwave radio link between two ordinary telephone switchboards, connecting any of the S.E.C.V.'s internal lines with the telephone system at Bogong and the construction camps beyond. From Bogong, radio phones connect to the outpost stations on the High Plains far above the snow-line. In operation, the service is similar to a normal telephone system but dispenses with the physical connection of wires and poles between the main terminals. Historical: This type of headphone was recommended for amateurs. It may have been used by operators on the Switchboard at Bogong or one of the construction camps on the Kiewa Hydro Electric Scheme. The S.E.C.V installed this unique system of communication to operate their branches especially at Bogong and beyond where the distance was great and often limited by the terrain and weather.Used for a transmitter radio or Radio Telephone as installed by the State Electricity Commission of Victoria 2 round ear pieces. Outside of ear piece has the brand inscribed and 3 points where wires are attached. On opposite edges of the earpieces a metal piece with handle is attached from which the 2 earpieces are connected with curved wire covered by leather to fit on top of the head. Each earpiece has a cord hanging from the middle attachment (on the outside) which joins and then continues as one to 2 metal pins that would fit into holes in the switchboard. On outside of each earpiece - 'Brunet & Co. / Paris' in oval 'Type f' underneathradio telephone. ear phones. head phones.communications.state electricity commission of victoria. kiewa hydro electric scheme. bogong. switchboards.

The Tawonga branch of the C.W.A. commenced on the 7th Feb. 1946 and often combined activities with the other branches in the Kiewa Valley. The C.W.A. aimed to improve health, welfare and education for women and children in the country. Women living in Tawonga were mostly on farms and, in 1946, when the branch commenced would have been feeling more remote with WW11 having an effect on available workers and the well being of the women and children.Round green and white badge with the CWA logo in the centre of a green triangular shield. The logo is in gold. Around the triangular shape it is white with Victoria in gold at the top and 2 slim leaves on each side of the other sides. The badge has a green border. The back is gold and two of them have a pin attached. The third has a ring attached at the top. On the back each one has a different inscription and all are hard to read. Each badge is very slightly different in texture and depth of colour perhaps indicating that they were made at different times."Victoria / CWA" On the back - 1. Inscribed in oval shape 'Morgan Swann' but upside down to each other. 2. Inscribed - 'Stoker' 3. Inscribed - 'Stokes' or 'Stones'tawonga. country woman's association of victoria. badge. cwa logo.

A Dray is a type of dead axle wagon that was used to transport heavy loads or objects. They had a flat level floor and while some had no sides, others had box bodies and sides. Tip Drays (also known as Tip Carts, Muck Cart, Scotch Cart, Tumbrel or Putt in different parts of England) were smaller than other drays as their loads were heavy and usually only pulled by one horse. Their basic design included two wheels, a tipping body and shafts. The Tip Dray has a unique mechanism that allows the top to tip backwards to tip the load out of the back of the dray. The tipper was activated by a handle at the front allowing the driver to operate it while still having control over the horse. A Tip Dray was an indispensable piece of equipment in the days before tractors and mechanical trucks. They were used by farmers and carters to transport hay, rocks, bricks, gravel and rubbish etc. and because they were useful for dumping loads, they were favoured for use in road and railway construction. A photo in the collection of the Lorne Historical Society shows a tipping dray being used during the construction of the Great Ocean Road. They were part of the daily street traffic in towns and cities around Australia from the early days of settlement. In Australia in the early 1900's, carters began to join unions to protect their jobs and pay. N.S.W. had a "Trolley, Draymen and Carters Union", Queensland had a "Tip Dray Men's Association" and in W. A. the "Top Dray Driver's Union" had a "cessation of work" in 1911 when they were fighting for an increase in their day's wages. In 1910 a meeting of Tip Carters was held in Geelong at the Trades Hall to discuss the formation of a union (The Geelong Tip Dray Carters) which was a success and a schedule of rates for all carting, whether by contract or day labor, was fixed. By 1912 they had "labelled" more than 50 drays and had representatives on the "Trades Hall and Eight Hours Committee". By the mid 1930's and early 1940's, tip drays were being superseded by mechanical trucks and utes. However tip drays continued to be used in some circumstances. They were a practical solution to the problem of petrol rationing during W. W. 2. It was noted in a letter to the editor in the "Sunshine Advocate" in 1938 that a positive argument for continued use of Tip Drays for rubbish collection related to the idea that a horse drawn vehicle involved with lots of stops and starts at different houses (very like a milkman's delivery route) often involved the horse "driving itself" while the driver picked up the rubbish - something a motor truck was unable to do! Another article written in August 1935 and published in the Age in a parliamentary report into the rubber industry noted "tip drays had almost disappeared and in their place, metal was carted in 5 ton motor trucks" but the report went on to say that as a part of the Government relief work (during the Great Depression) the Government had "to some extent reintroduced the tip drays so that a greater number of men would be employed". This particular tip dray was owned by Mr. Oswald (Jack) Bourke. He used it to deliver dry goods from Sunbury to the Queen Victoria Market in Melbourne several times a week in the 1930's and then (between 1945 and 1962) Mr. Bourke used it on the garbage round in Springvale Victoria for the Springvale Council. The Council owned three drays and the "No. 3" painted on this dray is in recognition of its original number. After the death of Mr. Bourke in 1990, one of Mr. Bourke's sons (Andy) found the dray in a shed and restored it. The sign writing on the back and side panels were added during the restoration. This Tipping Dray is a significant example of a horse drawn vehicle that was used by workers from the early days of white settlement through to the 1940's and even into the early 1960's. It was used in a range of "working class" occupations - road construction, railway construction, carting goods, rubbish collection etc. and would have been found in cities, country towns and on farms.A wooden and metal tipping dray with a box body and four sides. It has two iron and wooden wheels (with 14 spokes), two wooden shafts and a metal tipping mechanism. The back panel folds down to allow loads to be dumped out. It is painted in green and cream with sign writing on one of the sides and on the front and back panels. It features decorative painted lines and designs in burgundy, cream and light blue on most of the wooden parts. The tipping mechanism is on the front of the dray's left side and consists of a metal pin secured with a metal ring, and a lever.Front of dray - "No. 3" Side of dray - "A. & M. BOURKE / Contractors / LONGWARRY" Back of dray - "G.T. ANDREWS / QUEEN VICTORIA MARKET - Stand C23 / Phone DANDENONG 225"flagstaff hill maritime museum and village, warrnambool, shipwreck coast, tipping dray, dray, tip dray, tip cart, vehicles, horse drawn vehicle, springvale council, jack bourke, muck cart, scotch cart, tumbrel, putt, box body, oswald bourke, sunbury, queen victoria market, melbourne, no. 3

[a] Plain manilla envelope with handwritten captions, re 'Shipp Property, Wills St, Swan Hill. 'Alan Garden & Green' Solicitors Swan Hill 15/3/1940. Red pencilled No 4, crossed out No 139. [b] Two 'Alan Garden & Green' Swan Hill Barristers & Solicitors receipts pinned with an invoice issued to Cohn Bros, dating in March, May and June 1940. £340 and £11/19/6 receipt amounts re professional services relating to transfer and purchase of Mrs Shipp property in Wills St Swan Hill.bendigo, industry, cohn bros brewery

Hand drawn map on heavyweight decorated graph paper. Map has parts of Mt. Korong Rd. and Dowding St. drawn in. Broken line drawn from Lansells C & T to Iron Pin. Further away another line drawn from C & T Main Shaft to a point 67 ft 10 in. away, then 78 ft 10 in away, then another point 60 ft 3.5 in away. No date on drawing. Drawn on decorated graph paper, Lawson Series printed by Lawson & Bray (Sales) 58 Margaret Street, Sydney.mine, gold, collman & tacche, collman & tacche, map, lansells c & t, mt korong rd, dowding st.

Clothing. Infant's cream coloured cotton nightdress, with yoke front and back. Lace insert at centre front of yoke (10cm X 10cm). Round neckline with casing. Long sleeves gathered at shoulders with eyelet casing at wrist, and 1cm lace trim at hem. Casing threaded with cotton tape. Skirt gathered at yoke. Skirt has border of 2 X three rows of horizontal pin tucks. Centre back opening (26 cm) fastened with cotton tape tie at neckline and one X1cm button and button hole at centre yoke.costume, children's, infant's cream cotton nightdress

Clothing. Men's cream coloured cotton formal dress shirt. Stiffened bib front (27 cm X 38 cm) with pleats and pin tucks. Centre front placket (35 cm) with 7 cm button holed tab at lower end. Front opening fastened with three buttons and button holes (two buttons missing). Double button holes on 2 cm stand up collar. Body of shirt gathered into yoke at centre back. Long straight sleeves with 7 cm stiffened cuff with button holes for cuff links.Tag inside back neck. Coat of Arms, ''Fdad' Aluisio Napoli'' Red hand stitched laundry mark.costume, male, men's cream coloured dress shirt

Object. A 5 cm long brass pin at rear, to attach to a uniform. A clasp .75 cm deep, 4 cm long is in navy blue enamel, with gold lettering 'LIFE GOVERNOR'. From this clasp a 5 cm long light blue grosgrain ribbon holds a brass clasp or suspender, from which hangs a circular medal, with five star points. On a circle shape of dark blue enamel are the words:FREEMASONS HOMES OF VICTORIA.In the centre on a light blue enamel background is the Lodge Symbol of Compass and Square. On the back of the medal is engraved: J.E.Harper 1852.organisation, masonic lodge, life governor medal

Textiles. Brown leather handbag with silver coloured metal frame with push clasp. Leather tab to open on front. Three vertical pin stripes on one side front and back. Leather loop on back (2cm x3 cm). Inside lined with brown fabric with swinging hinged coin purse and two gathered inside pockets. Matching brown leather coin purse with press-stud fastener. Stored inside handbag containing a 1938 fold out calendar -"It's Christmas" printed on front of calendar with candlestick and holly leaves.textiles, domestic, ladies brown leather handbag

Documents: envelope contains - 1940 sale of mining Lease 9988 to R. A. Rankin pinned to 1905 conveyance, 1907 indemnity for explosives magazine on lease 7802, Richard Abbott 1872 conveyance- Fritz Von Dohren, 1858 Sheepshead Gully grant by purchase, 1865 conveyance Hans Wagner sells half share to Fritz Von Dohren, 1891 conveyance from Jane Von Dohren, 1871 mining lease Von Dorhren, 1891 agreement 1862 conveyance to Jane Von Dohren, 1872 Title to lease encumbrance removed 2/8/1905.MCCOLL RANKIN AND STANSISTREETorganization, business, gold mining - legal, mccoll rankin and stansistreet, new red, white & blue extended gold mining company n\l