Pear shaped metal mask for attaching to Probyn Williams inhaler. The edge of the facemask is surrounded by a black leather cushion, with a tube on the top. The facemask is metal with a thumb action lever on connector.anaesthesia, inhalational, probyn williams, facemask

It is likely that this object belonged to Dr Giles.Chevalier Jackson medium size steel made laryngoscope. Hexagonal shape design on handle and arm blade with a thumb support at the handle angle, missing the bulb light and all the system to support it. Deep scratches over the top and under blade with presence of dust marks over the handle, arm and inside the blade canal. Also has a grey paint mark over the top blade area. No stamped inscriptions are present just a label attached with a possible owner's name and a reference code to the museum old catalog.Attached label hand written inscription, Giles / S 4. 13chavalier jackson, laryngoscope, stainless steel

This oscillotonometer was owned by Dr. Herbert Claus Newman, an Anaesthetist who gained his diploma in Anaesthetics in 1956. Dr Newman served in the Vietnam War and was also one of over 50 of Australia's medical professionals who signed a joint statement in 2004 condemning the Federal Government for committing Australian troops to the Iraq war.Brown leather case with silver clasp and brown leather handle. Case contains Dr. von Recklinghausen Scala Alternans Oscillotonometer – a round silver pressure gauge with paper scale and needle point reader. The silver valve and lever at the bottom of the gauge connects black and orange rubber tubing to the grey linen arm cuff rolled closed with Velcro and a rubber inflation bulb.Yellow sticker on top of case in yellow type: H. NEWMAN Printed on face of gauge: Oscillotonometer / n. Dr. von Recklinghausen / "SCALA ALTERNANS" / 6585868 / S|K Printed on scale near zero reading: mmHg Printed on scale near highest reading: mm Hg = Torr Printed on scale is numbers 0 to 300 in increments of 20 Stamped on reverse of valve: 148blood pressure, oscillotonometer, dr. von recklinghausen, scala alternans, newman, h., newman, herbert claus, vietnam war

This academic bonnet belonged to Dr Mary Burnell. Mary Taylor Burnell was born on 21 February 1907, in Norwood, South Australia. She graduated with her MBBS in 1931. In 1932, Burnell served as a resident medical officer at Adelaide Children’s Hospital. By 1934 she was their Honorary Anaesthetist. It was also during this period that Burnell became the first female member of the Australian Society of Anaesthetists. One year later, in 1935, she worked as Secretary for the South Australian Section of the Society. Although resigning from her position at the Children’s Hospital in 1937, Burnell returned in 1942. The outbreak of World War II meant hospital staff and resources were drained. During her work, Burnell lobbied for a Department of Anaesthetics in the Children’s Hospital. Through working at both hospitals, she became aware of the great differences between administering anaesthesia to children and administering it to adults. In 1953 she was elected President of the Australian Society of Anaesthetists. She was the first female to be elected to this position. Two years later in 1955, Burnell was elected as a member of the Board of Faculty of Anaesthetists, Royal Australasian College of Surgeons. In 1966 she was elected Dean of the Faculty of Anaesthetists. Again, she was the first female to be elected to this position. Burnell worked tirelessly to promote the importance of anaesthetics in Australia. Burnell’s contributions to anaesthetics were recognised with Honorary Fellowships to both the Australian Faculty of Anaesthetists and Royal College of Surgeons. Navy blue velvet cloth bonnet with stiffened brim covered in same fabric as bonnet. Around the hat is tied a gold cord with tassels.burnell, mary, academic bonnet, australian society of anaesthetists, faculty of anaesthetists, royal australasian college of surgeons, royal college of surgeons, fellowship

Used by mothers during childbirth, the anaesthetic Trilene (trichloroethylene) was inhaled through a face mask [missing] attached to the rubber tubing [missing] and the vaporising chamber. The Trilene was poured into the chamber to be turned into a vapour. The machine was used in the obstetric wards at University College Hospital, London. Trilene was introduced in the 1940s. The machine was made by Cyprane Ltd.Khaki metal multi layered cylinder. Set on top of khaki metal plate with four (4) rubber feet.Stamped in red on top level of vaporiser: Cyprane Ltd •Stamped in red on serial plate: TECOTA MARK 6 / CHARGE WITH TRICHLOROETHYLENE B.P. / CYPRANE LTD. SERIAL No / KEIGHLEY / YORKS. / T1469 •Clear sticker with red printed text stuck on metal plate: PAT No 646680 / PATENTS PENDINGtrichlorethylene vaporiser, tecota mark 6

Object was gifted to Dr Lennard Travers upon his retirement from the Royal Melbourne Hospital, 1964. It was later donated to ANZCA. Lennard Travers, born in Melbourne in 1906, completed his MBBS at the University of Melbourne in 1930. After working for a brief period at the Royal Melbourne Hospital, Travers travelled to the United Kingdom achieving his Fellowship at the Royal College of Surgeons in Edinburgh. He returned to Australia prior to the outbreak of World War II serving as the honorary anaesthetist at the Royal Melbourne Hospital. In 1950, Travers joined the Australian Society of Anaesthetists overseeing the development of the Faculty of Anaesthetists, Royal Australasian College of Surgeons. He was appointed Dean of the Faculty in 1959. Silver plate tray, presented to Dr Lennard Travers on his retirement from Royal Melbourne Hospital, 1964. Embellishments and decorations around the edge of the tray also in silver. The middle of the tray has an inscription confirming the tray was presented to Dr Travers. Around the middle inscription are the signatures of other employees at the Royal Melbourne Hospital. Manufacturer's mark on the reverse of the tray. No other distinguishing features. Inscribed in centre of plate "Lennard G Travers, Anaesthetist, The Royal Melbourne Hospital, 1946 - 1964" •Inscribed around the central inscription are 24 signatures of anaesthetists and surgeons of the Royal Melbourne Hospital •Inscribed on back of tray "Old Sheffield Reproduction, Strachan"travers, lennard, royal melbourne hospital, wilson, patricia, bell, james, cass, noel, newman, herbert, nathan, alf, spinks, betty, russell, irene, cole, russell, houseman, helen, webb, arthur, edwards, n.

Sir Frederic W. Hewitt (1857-1916), an accomplished and well respected English anesthesiologist, was an expert in the function and use of the Clover Ether Inhaler. In 1901, Hewitt described his modification of the Clover Inhaler. Often referred to as the Hewitt Wide-Bore Inhaler, Dr. Hewitt introduced changes in order to make it easier to breathe through the device and improve the ventilation of oxygen and carbon dioxide. In 1901, Hewitt was recruited to anesthetize King Edward VII for emergency abdominal surgery. This was just a day or so before the new King was to be coronated. He recovered well, and Hewitt became the first anesthesiologist ever to be knighted. (Source: Wood Library Museum)Tall black round topped box with brass hooks at the sides and brass hinges at rear. There is a brown fabric handle on the top. The box has red padding inside the lid and red lining inside the base and sides. There is a round section in the base of the box for holding the round clear glass bottle for ether. There is also a ellipse-shaped metal inhaler on small metal base with a thin metal handle and pipe with bakelite plug attached via a small metal chain. A brown mask is made of brown leather and celluloid which is connected to the inhaler. There is a metal ether measure for pouring the ether.On notecard in box: (B) HEWITT'S INHALER 1895, MADE BY GEO. BARTH & CO LTD., ADVERTISED AS THE SOLE MAKERS OF THE INHALER AND RECOGNISED BY HEWITT IN HIS TEXT BOOK - ANAESTHETICS AND THEIR ADMINISTRATION - AS THE MAKER OF HIS INHALER. / GIVEN BY DR. E.S. HOLLOWAY IN 1951, WHO ACQUIRED MUCH OF HOWARD JONES' EQUIPMENT AFTER THE LATTER'S DEATH. Stamped on underside of glass bottle in a circle: WUBW [illegible] Blue sticker on inhaler: O.2.13. Printed on inhaler under handle: Geo Barth [illegible] / SOL [illegible] Printed on body of inhaler: Full Printed on body of inhaler: 1/2 Printed on inside of leather mask: F35hewitt, sir frederic, jones, howard, inhaler, geo. barth & co. ltd., ether

This device was designed by W E Collison for self administration of oxygen therapy, particularly in the home. By his own description "It presents none of the tiresome and irksome features associated with medical apparatus and is readily understood by patients." Registration number: 772839 and 785517 Patent number: 415437Metal tubing designed to attach to an oxygen cylinder which leads to a number of gauges and continues on to a metal head which holds two glass bulbs. Glass bulb on left is amber in colour and the glass bulb on the right is clear.Both bulbs have residue on the inside. Between the bulbs is a connecter that leads to red rubber tubing that is fluted toward the end.collison, oxygen therapy, inhaler

The Fluotec vaporizer was made to administer only halothane (Fluothane). It was one of the first vaporizers made for use with only one anesthetic, and one of the first to use a bimetallic coil for temperature compensation.The bimetallic coil is part of the valve that controls how much of the carrier gas enters the vapor chamber to vaporize the anesthetic.Modern vaporisers still use this bimetallic coil technology today. Serial No: 5040 Patent No: 814427 A ready reference “calibration card” came attached to these vaporizers. The card was printed with a scale that indicated the concentration of halothane produced at different flow rates and dial settings.This item does not have a reference card with it.This Flotec vaporiser holds historic significance as a very good example of an early model piece of equipment for halothane only administration. Modern vaporisers still use the bimetallic coil technology and therefore this object has scientific and research significance.Small metal stand with 3 rubber feet, Main metal cylinder body housing the bimetallic coil. Inlet valve with a brass attachment and metal outlet valve. Metal dial that controls % Penthrane. Dial notches range from OFF to 1.5. Small silver chain hangs from the top of the dial lever. Small silver metal box held by 4 screws and a round bakelite window with FULL inscribed in white text located on the front of the main cylinder Fluothane Cyprane vaporiser. Fluotec Mark II by Pentec, with stand. Royal Children's HospitalStamped on Inlet and outlet valve: INLET OUTLET Stamped on to a plate on the front of the vaporiser: KEEP UPRIGHT / PENTHRANE / WHEN CHARGEDinhaler, fluotec mark ii

This vaporiser has a main cylindrical body with a step up to the dial plate with a small red latch to lock dial in to place.On the front of the body sits a square gauge to indicate the level FULL along with a long rectangular shape.There is an Inlet and outlet valve that sits behind the metal dial.There is a manufacturers plate sitting on top of the dial and the inlet/outlet valve. Inscribed on top plate: KEEP UPRIGHT/ PENTEC 2/ WHEN CHARGED •Inscribed on inlet & oulet valve plate: PENTEC 2/ SERIAL NO 252939/ PATENTS PENDING •MADE IN / ENGLAND BY/ CYPRANE LTD / KEIGHLEY •Metal dial has inscribed: OFF/.2 .5 1 1.5 2 Max •Inscribed on front plate in green writing: USE ONLY/ PENTHRANE/ (METHOXYFLURANE)penthrane, vaporizer, anaesthesia, anaesthetic machine

In 1966 Harry Daly was admitted to the Order of St Michael and St George in recognition of over 35 years of service to medicine and anaesthesia.Large white enamelled seven armed Maltese Cross set around a dark blue ring bearing the Latin motto 'Auspicium Melioris Aevi'. The obverse depicting St Michael standing on the devil and the reverse St George on horseback killing a dragon. The medal comes with its blue-crimson-blue ribbon folded and stored under the velour badge holder. Medal and ribbon are set and stored in its custom made black case with the badge acronym in gold lettering on the top of the case [C.M.G.]. There is a card with instructions for wearing the medal under the velour holder along with a note from Geoffrey Kaye to Harry Daley.Printed on internal satin lining: BY APPOINTMENT / TO HER MAJESTY THE QUEEN / MEDALLISTS / BY APPOINTMENT / H.R.H. THE DUKE OF EDINBURGH / MEDALLISTS. / SPINK & SON, LTD. / 5 - 7, KING STREET, ST. JAMES'S, / LONDON, S.W.1.medal, st michael, st george, anaesthesia, harry daly

Scarifiers were traditionally used for blood letting, and in folk medicine for the practice of cupping. Spring loaded knives cut the skin, then a warmed metal or glass cup is placed over the cuts. As the air inside the cup cools, it creates a vacuum drawing out the "bad" blood. The process is also related to the ancient medical theory of "humors". This theory dates back to the Hippocratic tradition and persisted through to the mid-19th Century. According to this theory, the body had four "humors", "airs" or "elements" which neeed to be kept in balance. Any imbalance could cause illness and this was often explained in terms of excess fluids. One prescribed treatment was to remove the excess blood which would restore the balance.Square, solid brass object with lever to release blades underneath.Etched on side: Mundy / Londonmetal, blades, bloodletting

Used by the Mah Meri people, Kuala Langat, Selangor (Malaysia), 1936. While Malaysian, this blow-gun is analogous to that used by Indigenous groups from South America with curare. The gun is of bamboo, with a highly polished inner tube of the same. The darts are reeds, made directional by knobs of a tudor wood, with poison made from the ipoh tree and the Strychnos vine The blowpipe examined in this report consists of a long bamboo tube with engraved floral motifs on the outside and a second bamboo tube inside. The mouthpiece is attached to the inner tube and the whole piece can be removed from the outer casing. There is a quiver, filled with darts, a small poisons receptacle, and a single dart and hollow bamboo tube, stored outside the quiver. The objects were donated as a whole to the museum in 1948 by Dr Thomas Edward Marshall. The engravings on the outer case originate from the Mah Meri community in Kuala Langat, Selangor, Malaysia. The floral ‘motif is of a vine with small incisions to reflect the properties/identity of the plant (poisonous/harmful)’. These motifs are generally handed down through the generations and can be used for kinship identification. They are also believed to enhance the performance of the blowpipe. The outer casing is made up of several pieces of bamboo fused together. Broken or damaged blowpipes were not discarded. Broken sections of a pipe could be removed and replaced as required, and the observably different bamboo sections suggest this has taken place at some point. Sap from the perah tree is used to seal or glue the pieces together and the glue is reversible by heating. The Mah Meri created a poison from the ipoh tree for use in hunting. The poison acted swiftly to kill the animal and did not result in secondary poisoning. The way in which the Mah Meri hunted is analogous with other blowpipe hunting practices elsewhere in the world. Blowpipe hunting practices represent a starting point for the introduction of standardised muscle relaxants into surgery during the 20th Century. In parts of South America, plant poisons were used to tip the darts and kill prey. These poisons are known as curare. The crucial ingredient in curare was Chondrodendron tomentosum root. Raw curare formed the basis for Intocostrin, the first standardised, mass produced muscle relaxant. The introduction of muscle relaxants dramatically changed surgery, allowing for more precise surgery and better patient outcomes. Bamboo blowpipes can be found in many museum and heritage collections, particularly those with strong colonial origins or influence. Blowpipes from Borneo seem to be well represented, along with those from Guyana. Blowpipes from Malaysia appear to be less common. More research is required to establish the rarity or representativeness of the blowpipe. Ownership of the blowpipe can be traced back from the museum to Dr Thomas Marshall. It has also been established the blowpipe’s point of origin is among the Mah Meri people of Kuala Langat, near Kuala Lumpur. There is no information regarding the way in which Marshall came into possession of the blowpipe. Provenance cannot be fully established. Despite these difficulties, the blowpipe represents a full set of hunting implements. It is accompanied by a quiver, also decorated with a floral motif, a set of bamboo darts, and a poison receptacle. The quiver also has a waist strap which enabled the owner to strap it to themselves, preventing its loss while hunting. Each object within the set is in good condition, although the inner tubing is beginning to split lengthwise and should not be removed from its outer casing. While the blowpipe and accompanying objects are not of South American origin, the techniques and poisons used are analogous and this object has high interpretative capacity. Hollow bamboo blowpipe with mouthpiece at one end. Two different types of organic fibre have been used at difference points along the shaft to secure different segments of the blowpipe. The item consists of two tubes a thin and unpolished inner tube that has degraded and can no longer be removed, and a polished and decorated outer casing. The outer casing is made up of different sections of polished bamboo, some pieces have developed a deep red hue which is likely the result of prolonged polishing and regular heating over many years, other sections are a lighter yellow indicating that they are newer pieces of bamboo. The entire outer tube is covered in a varied sequence of genomic patterns. The exact meaning of these patterns is unknown however they are passed down through family lineage, the exact family of origin is unknown. Connected to the mouthpiece if it is removed from the inner casing is a piece of cloth with the numbers 2241 written in black ink, their purpose is unknown.curare, malaysia, bamboo

Invitation set to attend a garden reception to celebrate the Diamond Jubilee of Her Majesty Queen Elizabeth II, at Government House, Paddington, NSW. Set includes an official invitation, memento card, entree card and commemorative medal. tess brophy, tess cramond, humphry cramond, emeritus professor, entree card, queen elizabeth ii, government house, diamond jubilee, garden reception, medal, commemorative meda, day attire, invitation, penelope wensley, stuart mccosker

The use of a catheter for oxygen therapy was introduced by Arbuthnot Lane in 1907. However, its true value can be seen in its use during WWI. Masks were cumbersome and uncomfortable for the wounded and nasal delivery of oxygen was received more easily. The Tudor Edwards' Spectacle-frame was manufactured in London during the 1930s. Dr Penn recorded that it was an inefficient means of oxygen therapy because of the smallness of the nasal tubes.Metal mask resembling spectacles with round frames and rounded ends of the arms to secure around the ear. There is a tube coming from each round eye frame to end in a curve that sits in the nostril. The other end of this tube has a rubber tube attached which meets in the middle via a metal connector.oxygen therapy, intra-nasal

One of a range of metal face masks designed to have a cover which helps protect the patient's face.Wire frame mask designed to cover mouth and nose. There is a metal hook on the left hand side protuding from the base of the mask and wire mesh raised from the base with a circle in the middle.facemask, anaesthesia, ramsay surgical

Wire framed face mask with a hinged outer layer which can be opened to insert gauze or flannel on which to administer ether. The domed portion is attached by inserting wire edges into slots in the rim, which ends in a handle with a loop at the end.mask, ether, anaesthesia, open method

Triangular shaped mask with hinged arm at point of triangle that connected to upper wire section via a hook. Known as Murray's Mask and used for the administration of chloroform. Mask is covered with linen (gauze) cloth onto which chloroform would be dropped.mask, murray, chloroform

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

This inhaler appears to be a modification of the original Rendle's inhaler, developed in 1867 by Richard Rendle for use with bichloride of methylene. Rendle's original design was criticised as there was no clear way to regulate the dosage of anaesthetic and it was difficult to clean. Nevertheless, the inhaler was available until 1915. Richard Rendle was the second son of William Rendle (qv), Medical Officer of Health for St George the Martyr, Southwark, London, SE, of whom there is an account in the Dictionary of National Biography. Richard Rendle studied at Guy's Hospital, where he held the posts of House Surgeon, Surgical Registrar, and Demonstrator of Anatomy. He was afterwards House Surgeon at the Seamen's Hospital, Greenwich, and at the Waterloo Road Royal Infirmary for Women and Children, and then Resident Medical Officer at the Brompton Consumption Hospital. Resigning that post, he was put in medical charge of an emigrant ship to Australia, where he remained. He held several posts there: Resident Medical Officer of the Government Hospital, Fremantle; Medical Officer of the Lying-in Hospital and Hospital for Children; also Health Officer at Brisbane. In later years he practised at Taringa, near Brisbane, and died at Taringa, Queensland, on Aug 10th, 1907. The mask for the administration of bichloride of methylene was named after him in the instrument-makers' catalogues. (Source: RCS England, Plarr's Lives of the Fellows)Leather inhalational face mask in a cone shape covered with red flannel on the outside natural coloured linen lining the inside. There is a natural sea sponge inside the cone. A perferated ring sits at the top of the cone, surrounding a circular opening which is formed from metal. There is also a circular opening on the side.richard rendle, bichloride of methylene, guy's hospital, taringa

Professor Arthur Barrington (Barry) Baker was the first Australian anaesthetist to gain a DPhil in anaesthesia. He completed his DPhil at Oxford University at the Nuffield Department of Anesthesia in 1971, titled, Physiological Responses to Artificial Ventilation. The Waveform Ventilator is the machine developed to illustrate his DPhil. The waveform ventilator was used in several scientific studies on 'the effects of varying inspiratory flow waveforms and time in intermittent positive pressure ventilation (IPPV)', published in the 'British Journal of Anaesthesia'. Professor Arthur Barrington Baker had an extensive career in research and clinical practice including holding the position as the Nuffield Professor of Anaesthetics at Sydney university (1992 - 2005) and also as the Dean of the Australian and New Zealand College of Anaesthetists (ANZCA) (1987-1990).The variable waveform ventilator is of national significance, due to its association with Professor Arthur Barrington Baker (Prof. Baker) the first Australian academic anaesthetist, and the representation of historical social themes and research and design, in anaesthesia. Historic significance – It is a rare type of ventilator in good condition and well provenanced. It is a tangible record of the beginning of the long established and distinguished career of Prof. Baker, the first anaesthetist in Australia to gain a DPhil. Prof Baker has a strong involvement in the Australian and New Zealand College of Anaesthetists (ANZCA) organisation. The object is a product of Prof Baker’s Doctorate of Philosophy (DPhil) on respiratory physiology and is associated with the prestigious Oxford University and the well-known Nuffield Department of Anaesthetics. It also represents the social theme of migration to England from Australia in the 1960s and 1970s to access and experience academic and artistic opportunities limited in Australia at the time. Scientific Value – The object is of scientific value as it offers major potential for education and interpretation in anaesthesia. Although ventilators are common equipment, this specific design and construct prototype is one of a kind, designed and used specifically for research purposes. A rectangular shaped object on a trolley with four wheels. The top half of the object consists of two panels, one of cream coloured painted wood, the other black plastic, both containing several dials of different shapes and sizes. The wood surface also contains several gauges and a safety pressure clear plastic box. The plastic surface also contains a pin board. The bottom half of the object consists of two shelves. The whole object's perimeter is lined with perforated metals. The top wooden surface has several metal pieces of equipment and a long tube. The rear of the object contains numerous types of tubing and wire, a gas cylinder and two leather straps with buckles. The bottom half of one side of the objects has 3 electrical power outlets.Waveform Generator, Drs Colliss N Cowie, Dr Baker Dr Murray Willson, Dr Babbington, Safety Pressure, Error POS F/B, Position, Feedback, Set Balance, Reset, Full Stroke, Velocity, Converter Current, line Pressure, Low Pressure, Bias Pressure, Start, Stop, Stop, Reset Press, Max Press, W/G Output, A/CRO B/2.baker, arthur barrington, baker, barry, professor, academic anaesthetist, oxford university, nuffield department of anaesthesia

A characteristic black, round topped box, to carry medical equipment with a divider which would have held a square, plain glass bottle. The donor, Dr. Holloway is known to have acquired much of Dr. Howard Jones' equipment. In 1930 Dr Howard Jones, M.B., B.S., (Lond.). Surgeon Anaesthetist to Charing Cross Hospital first described percaine in an article in the British Journal of Anaesthesia. According to Norman, J. in the British Journal of Anaesthesia, Jones was the first honorary secretary of the Association of Great Britain and Ireland, 'of spinal anaesthesia fame', and a leading practitioner in his day. He apparently committed suicide in 1935, there are references that he 'could not make a living from anaesthesia'. (Norman, 2002, 'An informal history of the first 25 years', The British Journal of Anaesthesia, 88 (3): 445-450) The maker of this medical box, Allen and Hanburys Ltd., was a British pharmaceutical manufacturer, founded in 1715, absorbed by Glaxo Laboratories in 1958.Black cardboard box with handle and simple border decoration on top. Brass hinges at the rear and two brass hook clasps at the front. Interior is lined with black linen. Cardboard divider inside and square compartment in corner would have been used to hold a bottle of ether in place.Printed in gold leaf inside lid: ALLEN & HANBURYS LTD / LONDON.W. / 48.WIGMORE STdr. [e.s.] holloway, medical box, carry kit, allen & hanbury's ltd.

Ethyl chloride was first used as a general anaesthetic in 1847, by Johann Ferdinand Heyfelder (1798-1869), a German surgeon. Once ethyl chloride became readily available, it was again taken up as a general anaesthetic in the late 1890s (USA). Ethyl chloride evaporates very quickly so that when it is sprayed onto the skin it produces very cold temperatures. “Refrigeration anesthesia”, or cryoanesthesia, refers to the anesthesia produced when the skin is significantly cooled.Due to its rapid onset, ethyl chloride was often used to induce general anaesthesia. It would be followed by a second anaesthetic, such as ether or nitrous oxide, which would be used for the remainder of the procedure. (The Wood Library Museum, 2016) The bottle has clear side and base mould seams which indicate it was made using a cup bottom mould.Glass bottle with paper label, metal fastening at the top and cream coloured plastic sealant at the neck. The bottle has clear side and base mould seams which indicate it was made using a cup bottom mould.Printed on main label at front: 100 c.c. 3 1/2 fl. ozs. / MEDICINAL CHEMICALS CORP [illegible] / MEDCO / ETHYL CHLORIDE / PURE / This Product conforms to all the re-/quirements of the BRITISH PHARMA-/COPCEIA, 1932, for / GENERAL ANAESTHESIA / Manufactured by / MEDICINAL CHEMICALS CORPORATION PTY. LIMITED / 39 Martin Place, Sydney Printed on round label on reverse side: 6d. / Cred [illegible]this container if returned in good order and condition. Stamped into underside of bottle: CM / S99ethyl chloride, medco, medicinal chemicals corporation pty. ltd, dr [e.s] holloway, bottle

The bottle was probably used for holding ether as part of a doctors medical kit. The bottle has visible side mould seams on the shoulder which discontinues or fades at the lip, a tooled finish and the glass has bubbles. There is no pontil-scar or mark on the base of the bottle, but there is a circular mould seam on the base.Small square based glass bottle with round neck, possibly used to hold ether. Found inside carry box with other unrelated objects including brown stopper which does not fit in bottle. Appropriate stopper for glass bottle is not present.Small amount of brown residue inside bottle. Bubbles in side of glass. Brown marks on outer bottle. Scratches inside bottle neck. Glass stopper missing.dr [e.s.] holloway, bottle, glass

Sidney Yankauer, M.D. (1872-1932), an ear, nose and throat specialist and pioneer in bronchoscopy, practiced at the Mount Sinai Hospital in New York. Dr. Yankauer, a prolific inventor of medical equipment, might best be known for the tube he designed for suctioning the mouth and throat. Yankauer introduced the wire-mesh anaesthesia mask around 1904. The drop method involved placing the mask over the patient’s nose and mouth, and then placing gauze over the mesh of the mask. Next, liquid anaesthetic, such as ether or chloroform, was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. The gutter around the base of the mask was designed to catch any residue of the harmful anaesthetic. (The Wood Library Museum, 2016; Museum of Healthcare Kingston, 2016)A metal tear-shaped mask with gauze wire dome, gutter around the base and detachable spring piece with open circular handle to secure cloth over gauze. Found inside medical carry box #899Stamped underneath neck of circular handle: HATRICKdr [e.s.] holloway, hatrick, yankauer, drop method, mask, gauze

Seems to be a non- collapsible mask. Otherwise is a similar, thinner variety of Murray's mask, which was used for the administration of choloroform. John Murray was born in England, 1843 and described his wire mask in 1868 as a young chloroformist at Middlesex Hospital. It was wedge-shaped and made of thick wire and designed to be folded. The removable cover was originally made of several layers of flannel. Murray’s mask became very popular, especially in Australia, and was generally used with a single layer of flannel without an aperture or opening, as is this example. John Murray was an enthusiastic and innovative physician who also had an interest in nitrous oxide anaesthesia and conducted a series of experiments with J. Burdon Sanderson on dental patients comparing nitrous oxide to pure nitrogen. His career was short-lived and he died just before his 30th birthday. (Ball, C 1995, 'Cover Note: Murray's Chloroform Mask', Anaesthesia and Intensive Care, Vol. 23, No. 2, pg. 135)Triangular shaped wire mask covered by flannel. The flannel is sewn over frame and stitched around the base and along the vertical wire. The style and shape is similar to Murray's mask, which was used for the administration of chloroform, however this variation is not collapsible like Murray's mask.dr [e.s] holloway, mask, dr j. murray, chloroform

The vase was made from the liquefaction that came out of the Christchurch earthquake of 22 February 2011. The vase was gifted to the College by Professor Edward Shipton (known as Ted) on his retirement as Dean of the Faculty of Pain Medicine, and from Council. Professor Shipton is from New Zealand. The gift was accompanied by a card with the following inscription: "Thank you for allowing me to be a small part of your great institution as Councillor and Faculty Dean these past two years. My gift to the College is a small vase. This vase was made from the liquefaction that came out of the 22 February 2011 Christchurch Earthquake. It pays tribute to the medical personnel, our Fellows and Trainees that gave so much during that time to preserve life and relieve suffering. Sincerely Edward (Ted) Shipton"Small cream coloured, round vase with brown glazed rings around the shoulder of the vase.shipton, edward (ted), dean, faculty of pain medicine, christchurch earthquake, liquefaction, pottery, mcelvey, joy

Professor Alan Merry commissioned the work from New Zealand artist Heke Collier as a gift to the College at his retirement from Council. This artwork was carved by Heke Collier in May-July 2016. It is made from native New Zealand Rimu timber. Heke named this carving Mauri Ora which translates to vitality, well-being or the healing life-force. Tihei Mauri Ora (breath of life) is a well-known Māori saying that was uttered by the first human being. Māori believe that all people and all things have mauri. This carving symbolises the many shapes and forms of mauri with reference to the Māori creation story, and the spiritual and natural worlds. Māori refer to the heavens as Ranginui the sky-father and according to the Māori creation story, Ranginui was pressed against Papatūānuku the earth mother. Their children did not like living in the cramped, dark space between them. One of their sons Tāne separated Ranginui and Papatūānuku to allow light and life into the world. The central male figure carved into Mauri Ora (above) is Tāne. To his right (far right) is his mother Papatūānuku and to his left (far left) is his father Ranginui. Papatūānuku gives birth to all things including human kind and provides the physical and spiritual basis for life. The takarangi (spiral) design in the carving (to the left of Tāne) symbolises the life cycle. Whenua, the word for land also means placenta - organ that nourishes the baby in the womb. Women are associated with the land (whenua) because the land gives birth to people and so do women. In tribal history women have had influence over land and men. Papatūānuku is depicted in the carving to the right of Tāne. Ranginui played a pivotal role in the birth of the sun, moon, planets, stars and constellations – collectively called Te Whānau Mārama (the family of light). Human life and knowledge were said to originate in the realm of Ranginui. Tāne ascended the heavens to retrieve three baskets of knowledge: te kete-tuatea (basket of light), te kete-tuauri (basket of darkness) and te kete-aronui (basket of pursuit). Ranginui is depicted in the carving to the left of Tāne. Tāne had many different roles, and he was given different names to reflect these roles. He is called Tāne-mahuta as god of the forest, Tāne-te-wānanga as the bringer of knowledge, and Tāne-te-waiora as the bringer of life, prosperity, and welfare. His teachings and knowledge are relevant in contemporary times, and the cell-phone carved into his left hand represents this. Tuatara feature in the Māori creation story and some tribes view Tuatara as kaitiaki (guardians) of knowledge. Given that they have lived for more than 220million years. There are birds or manu surrounding Tāne in the carving, who represent Tane’s voice or the voice of the forest. The flax or harakeke depicted in the carving represent the family unit and reinforce the importance of kinship ties. There are plants, ferns, and birds carved into Mauri Ora play an integral role in the life-cycle which represent rongoa Māori or Māori medicine. Traditional Māori carving in Rimu, a native New Zealand wood, with paua insets.merry, alan, anzca council, collier, heke, kaiwhakairo, master carver, rimu

This photographic portrait was commissioned to commemorate Dr Genevieve Goulding's term as President of ANZCA. Traditionally, ANZCA presidents have been commemorated at the end of their term with a commissioned oil painting. In 2015, the decision was made by ANZCA Council to change to photographic portraiture. This meant the existing oil paintings of College presidents became a formed collection which will not be added to and this portrait is the first to be commissioned in the new medium. It was unveiled at the ANZCA Council dinner on 22 July 2016. Framed colour photographic portrait of Dr Genevieve Goulding holding the President's medal.goulding, genevieve, anzca president, anzca council, budgeon, chris, photographic artist

A laryngoscope is an instrument used to view the larynx (voice box), which is the opening to the trachea and lungs. It consists of a “blade,” which goes into the patient’s mouth, and a handle. Prior to 1943 when Macintosh introduced his curved blade, most laryngoscope blades were long and straight. The straight blades were used to directly hold the epiglottis. Macintosh’s curved blade works differently: it indirectly opens the epiglottis by applying pressure to a space between the root of the tongue and epiglottis, called the vallecula. The flange running along the left lower edge of Macintosh’s blade was also a novel innovation. It was designed to move the tongue to the side, which improved the view of the larynx and made more room for a breathing tube. The Macintosh Laryngoscope remains one of the most popular blades worldwide. (Source: Wood Library Museum) This laryngoscope was previously owned by John Mainland, as evidenced by the name etched into the handle. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.Oblong shaped handle with textured grip. Attached is a laryngoscope blade in a cruved shaped with light tube running through one side.Etched into top of handle: J.F. MAINLAND •Stamped into top of handle: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into base of handle: CLOSE [arrow] •Etched into base of blade: MAC / 4 •Stamped into side of blade: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into side of blade: STAINLESSmacintosh, robert reynolds, new zealand, laryngoscope, mainland, john, alfred hospital, moon landing