The item was donated by Dr K McCaul of the Royal Women's Hospital, Melbourne, in 1966.Anaesthetic trilene was administered to the patient via rubber tubing from the Trilene inhaler, within which the anaesthetic was converted into a vapor. The cylindrical metal apparatus sits atop a flat, square stand with four black rubber feet. Item includes ports and valves for connection to a face mask and vaporising chamber, as well as mask attachment and metal pouring jug with spout.Red markings identifying the manufacturer and the measurement scale are located on both the stand and top twist dial. The base of the mask attachment piece is inscribed with the manufacturer's details: 'Cyprane Ltd'. The metal beaker is engraved with a line marked at the 15cc level. trilene inhaler, tecota, anaesthesia, beaker, mask, vaporise, obstetrics, childbirth, dr k mccaul royal women's hospital melbourne, 1966, vapor, face mask, vaporising chamber, cyprane ltd, keighley

The Kimpton Brown flask was first described in 1913; the first successful citrated blood transfusion occurred in November 1914.Frosted, cylindrical glass flask with brown rubber stopper at top. A fluid outlet is located on the bottom of the flask and a narrow, horizontal and cylindrical valve is located below the flask rim. The flask contains a maximum volume of 600cc of fluid. The item was used in the collection and administration of blood transfusion procedures and the inside of the flask has a coating of paraffin wax to retard coagulation.flask, blood transfusion, anaesthetic, glass, parrafin wax, kimpton, 1914, coagulate, blood, frosted

The McKesson Nargraf anaesthetic record was introduced in 1930, created by Dr Elmer I. McKesson.Black and white photograph of a drawing of the head of a McKesson Nargraf anaesthetic record, Model J. The view is from the top looking down onto the machine, showing a round vaporiser with a valve attached to it and two round pressure gauges on either side. There are blood pressure tubes attached to the sides of the machine. The recorder on the top of the photograph has a chart attached to it with written details.Each part of the machine has been labelled and handwritten in black ink the letters A - H and J - P on the surface.mckesson nargraf anaesthetic record, anaesthetic equipment, anaesthetic apparatus

This soda syphon (or siphon) was distributed by John Fletcher of Warrnambool, and made by the British Syphon Mfg. Co. Ltd. of London between the 1900s-1930s. It comprises a multi-sided clear glass bottle, an internal glass tube and a metal release valve and spout on the top. It was used to dispense pressurised, effervescent soda water. It was often used as an alternative to water or added to fruit juices and cordials. The text on this bottle states that it remains the property of the retailer, John Fletcher, and must be returned to him. Customers were asked for a deposit on the bottle, which would be refunded when the bottle was exchanged or continued as the deposit on a fresh bottle. Returned bottles would be cleaned and recharged with the gas and sold again. Soda syphon are bottles, glass or metal, with a release valve and spout on the top. The valve lever on the top of the syphon, when depressed, causes the gas in the syphon to force the water up through the tube and out of the spout. The bottle’s mechanism gives the water an effervescent quality to make bubbly drinks such as sparkling mineral water, soda water and sparkling water. ABOUT JOHN FLETCHER John Fletcher bought the Union Cordial Factory in Koroit Street, Warrnambool that was previously owned by John Davis. Fletcher operated the factory as J Fletcher, John Fletcher and Fletcher’s. He eventually sold his business and stock in 1930 to Ralph Reeves, who may have continued using Fletcher’s supply of drink containers before renewing them with stock showing his own brand. The soda syphon is representative of drink containers used in the later 19th and early 20th century. It also represents the system of returnable, recyclable containers. Soda syphon (or siphon). Glass bottle, clear, multi sided, tapered from a heavy glass base to a narrower shoulder, with glass tube at centre connected to metal pump mechanism at the top. Has elaborate frosted label for J. Fletcher of Warrnambool. Made by the British Syphon Mfg. Co. Ltd. London. Bottle remains the property of John Fletcher, Warrnambool.Metal syphon has impressed "J FLETCHER" and logo "S S" in centre of two concentric circles with text between circles "BRITISH SYPHON MFG. CO. LTD. LONDON". Etched into glass "J. FLETCHER / WARRNAMBOOL", "TRADE "[stylised] F" / MARK", "SODA WATER", "THIS SYPHON IS THE PROPERTY / OF JOHN FLETCHER / WARRNAMBOOL AND CONNOT BE / AND CONNOT BE LEGALLY USED BY OTHERS / BRITISH SYPHON CO. TLD. LONDON / - - - - "flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john fletcher, fletcher, john fletcher of warrnambool, soda siphon, soda syphon, british syphon mfg co ltd of london, soft drinks, soda drinks

A steam boiler like this one, made in the late 18th century, is often called a colonial boiler. Steam boilers were used in factories throughout Australia, mounted over similar designs of brick furnaces. This boiler is a fire tube type, in which the heat from the fire travels through the tubes and water circulates around them. Another kind of boiler is a water tube boiler, in which the water is inside the tubes and the heat of the combustion surrounds the tubes. The boiler in our collection burned wood as fuel but others of this design could also burn coal, coke, gas and liquid fuels. The boiler was made by T & F Johnson, boilermakers. In 1922 their factory was located at Coventry Street, South Melbourne. They were still advertising their 'Colonial, multi, vertical boilers, all sizes' at the same address in 1934. The connected pressure gauge, made in London by Dewrance, measures 0 to 400 pounds per square inch. John Dewrance is renowned as a pioneer of the steam locomotive in the early 19th century. He founded John Dewrance & Co. in South London in 1844. His son Sir John Dewrance took over in 1879. In 1939 the company became a subsidiary of Babcock & Wilcox, and was eventually owned by Emerson. How the boiler works: - A boiler is about two-thirds filled with water and heat is applied, in this case in the form of burning wood. The heat is transferred through the metal of the boiler to the water. When the water boils the steam rises to the top, and as it escapes from the boiler the steam pressure builds up in the steam space to later be released to do work; drive machinery such as ship and train engines, turbines, presses, wheels, and driving belts to operate looms and saws. The heat associated with the boiler can be used for preserving food, sterilising, factory manufacturing processes, and steaming wood for shipbuildin. Every boiler has several components fitted for safe operation: - - Safety valves - Gauge glass - Pressure gauge - Main steam stop valve - Water check valve - Blowdown valve - Manhole doorThe boiler is a significant item that gives us a snapshot of early Melbourne's industrial history. It is an example of the technological advancement during the Industrial Revolution where steam-driven machinery and motors could perform tasks more efficiently than manual labour. The makers were one of many boilermaker businesses in Melbourne during the early late-19th andearly 20th centuries. The maritime trade and skills of boilermaking are still learned and applied today. The Dewrance steam pressure gauge connected to the boiler was made by the London firms foundered by John Dewrance. He was renowned for developing the steam locomotive in the early 19th century.Boiler; a horizontal cylindrical underfired steam boiler. It is a multi-tubular design and is timber plank-clad, with brass fittings and pressure gauges. The boiler has an iron door at one end with a metal chimney above it. It is installed over a brick-enclosed solid fuel furnace. Two large, wood-mounted pressure gauges are connected to the boiler and have inscriptions. An inscription is on a red, cast iron plaque above the boiler door. The boiler's maker is T & F Johnson, South Melbourne. One of the pressure gauges was made by Dewrance, London..Maker's plate: "T & F JOHNSON / BOILERMAKERS / SOUTH MELBOURNE" Pressure gauge: "POUNDS PRESSURE / PER [square] INCH / DEWRANCE LONDON"flagstaff hill, warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, boiler, multi tube boiler, steam boiler, steam technology, underfired boiler, horizontal boiler, timber clad boiler, steam power, industrialisation, boilermakers, south melbourne, dewrance, john dewrance, pressure gauge, dewrance pressure gauge, t & f johnson, london, steam engine, steam locomotive, pounds per square inch, 19th century, steam machine

WWII British pattern flying helmet, leather. Sewn in ear phones, wiring is cotton covered. Large bakelite four pole plug, mouthpiece is rubber. Exhaust valve & rubber tube at bottom. Built in microphone has an external on/off switch, wiring broken away. Straps are cotton webbing. Helmet has five small leather straps around the crown.On headphones: "R ALLAN"uniforms airforce, trades-leatherworking, passchendaele barracks trust, helmet flying

This gas anaesthesia machine comprises a four yolk manifold, two circular metal components for nitrous oxide and two for oxygen. It is mounted atop a four pointed stand on casters for portability. In addition to reducing valves and regulators, the main stand also supports a cream-coloured, cylindrical Austox fractional rebreather and an ether vaporiser with variable bypass control within a circular glass container. portable, anaesthesia, midwifery, dentistry, obstetrics, oxygen, nitrous oxide, commonwealth industrial gases ltd, cig, austox fractional rebreather, ether vaporiser, variable bypass control, 1950

Yields information about the Ballarat Power Station B soon after construction and the precinct.Colour digital images taken by W. J. Llewelyn of Ballarat B Power Station, Norman St with a view showing some of the roof mounted equipment and looking towards the Wendouree suburb with Norman St in the view.. Could be early 1954, given the works at Johns Valves - Photo taken at the same time as btm6845i.. Note the surveyor and level in the middle bottom of the photograph.trams, tramways, ballarat b power station, secv, manufacturing, norman st

Colour slide of L 102, northbound, leaving High Street St Kilda at St Kilda Junction, running a route 4 service. The tram has adverts for Dutor valves and Booses engine oil additive. In the background are R T Taylor licensed grocer, Brookes Bros, the Junction Hotel advertising Rothmans, Dunlop tyres, and Wynvale Flagons. Some roadworks are taking place on the right-hand side.Yields information about St Kilda Junction and tram 102Kodachrome colour slides, cardboard mount, duplicate.Has "MP102" in pencil and stamped "Tramways Museum Society Victoria" on rear.tramways, l class, tram 102, st kilda junction, trams, route 4

Malcolm Moore No. 1013 Four wheel Diesel Rail Tractor Gauge 2'0" Malcolm Moore rail tractor (Builder’s Number 1013) It was built for the Australian Army in 1943. It was sold to the Inkerman Sugar Mill in Queensland around 1948 for hauling cane and shunting at the works. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It was purchased from the Inkerman Mill of Pioneer Sugar Mills in 1982. Historic - Industrial narrow gauge Railway - Diesel Rail Tractor - used by the Australian Army and Inkerman Sugar Mill in QueenslandDiesel Rail Tractor made of iron and wrought irondiesel rail tractor, puffing billy, inkerman mill, industrial narrow gauge railway, gauge 2’0”, inkerman sugar mill, australian army

Rose Series postcard No. P 3589, titled "Bourke Street looking to Parliament House, Melbourne". The photo looks east from Queen Street. There are several cable trams in the view. Has signs for Gibson, the Victoria Hotel, Osram lamps and valves, BGE, Myer, Foys, Danks, Thomas Evans, Donald Macintosh gun maker, and the Evans House, The Commercial Bank of Australia. See item 8071 for a similar image.Yields information about Bourke St c1939.Postcard - printed real photograph with Rose Stereograph Co. name on the rear.trams, tramways, cable trams, bourke st

These two soda syphons were used to dispense soda water. They are marked ‘J. Fletcher’ with one of the bottles having the extra label of ‘Reeves’. The bottles come from the cordial factory in Koroit Street, Warrnambool. John Fletcher worked as a young boy in Rowley’s cordial factory in Banyan Street, Warrnambool and then worked for John Davis who had established the Union Cordial Factory in Koroit Street in the 1860s. John Fletcher bought the Davis business in 1885 and operated this factory until 1930. He then sold to Ralph Reeves who initially used the Fletcher bottles and syphons. At least one of these syphons comes from the Koroit Street factory during the proprietorship of Ralph Reeves.These soda syphons are of interest as they come from a local Warrnambool cordial factory in Koroit Street. Cordial manufacturing was an important industry in Warrnambool for over100 years. These are two soda syphons made of glass with heavy round bases and ridged surfaces on the bottle bodies. The metal tops contain the pump and valve mechanisms and the inside of the bottles have glass tubes attached to the top mechanisms. The sides of the bottle have the Fletcher trade mark symbol of the stylized letters J and F, Both metal tops are corroded. Both bottles contain a small amount of liquid.‘J. Fletcher’ “J. Fletcher Trade Mark Warrnambool’ ‘Soda Water’ ‘This syphon is the property of John Fletcher Warrnambool and cannot be legally used by others’ ‘British Syphon Co. Ltd. London Reg. No 762’. ‘Reeves Soda Water’ (one bottle only) cordial manufacturing in warrnambool, history of warrnambool

Robert James Minnitt introduced the concept of self-administered analgesia, using an apparatus designed and built in conjunction with London scientific instrument-maker, Charles King. The Minnitt apparatus met with considerable success and led to further modifications, including the introduction of the Queen Charlotte gas-air analgesia apparatus in 1936, manufactured by the British Oxygen Company.Black and white photograph of a Minnitt gas/air analgesia apparatus, in a Queen Charlotte case. The case is standing open with the apparatus inside. A label with instructions is on the left side of the case, and the apparatus is on the right side of the case. A nitrous oxide cylinder tank and valve is connected to a small box with a regulator. A tube with a breathing mask is attached to the box. The Queen Charlotte case has hinges on the side and a handle on the top.minnitt gas air apparatus, minnitt, nitrous oxide, queen charlotte case, anaesthetic equipment

Given to K May to playBrown wooden and black leather button accordion. Wooden and leather strap handles at one end. Wooden base with buttons and metal valves at the other end. Leather covered concertina bellows in the middle section. Silver embossing & trim on either end. Case is broen coloured hard cardboard with metal studs and corners. Two latches and a lock on the front. Leather handle on the hinged top.The Grand Organ Made in Germany

The cornet was owned and used by W H Nicholls, a member of the Linton Brass Band, most likely in the 1890s or early 1900s. The cornet was donated to Linton & District Historical Society in 2017 by Robyn Nicholls, of Blackburn. It is understood in the Nicholls family that Robyn's late husband, Graeme Nicholls, inherited the cornet from his great-grandfather, William Henry Nicholls (1845-1902). However it is also possible that the cornet was owned and played by Graeme's grandfather, also named William Henry Nicholls (1880-1943).Brass cornet with mouthpieces, in original dark wooden case which has red fabric lining. Instrument is approximately 30cm in length, has a 12 cm bell and three valves. A small portable sheet-music holder is also in the carrying case. The manufacturer's name "Gautrot Brevete, Paris" is imprinted on the bell, along with the inscription "Exposition Universelle de Paris, 1889, Medaille d'Or". EXHIBITION / UNIVERSELLE / DE PARIS / 1889 / MEDAILLE D'OR / Gautrot Brevete / PARIS.linton brass band, musical instruments

Black and white (hand tinted) photograph of Weir structure at Laanecoorie. Figure on left of photo. Inscriptions: 'Laanecoorie Weir on reverse in black lead pencil. History: James Lerk 17.3.2000 'Laanecoorie Weir' built by Bendigo contractor. Valves by Roberts Foundry ' With note' photographs from Mrs Ella Bourke, 131 Barnard St, Bendigo Ph 43 8269. Photographs Frances (Frank) Thomas Bourke.Francis (Frank) Thomas Kennedyplace, water, laanecorrie weir

This is a 6 valve portable transceiver, made in Australia from a British design. It was only used for C.W. (morse code). Its frequency was in the range of 2.5-3.5MHz. Output power 0.5-5 watts. Use was for commando and infantry patrols up to battalion level. It had an external battery pack for low and high voltage supply. 1 man operation in Tropics. An image of this type of wireless set in operation can be found in the AWM Collection: P02952.012 081815 Aluminium box, cover missing. The top has various dials, jacks and one gauge. There is a small length of cable coming from the control panel to a 4 pin plug. On the outside of case is the phrase D (arrow up)D 208 MKIIPlaque on control panel "WIRELESS SET - ZAA 2088 SERIAL NUMBER 168 DATE = 1944"wireless, wwii

PORT PHILLIP & COLONIAL MINING COMPANY LIMITED AND CLUNES QUARTZ MINING COMPANY, THE MACHINE CONTAINED 5 BOILERS, 3 ENGINES 145 HP, 80 HEADS OF STAMPS, 7 BUDDLES, 2 CHILIAN MILLS & 2 STONE BREAKERS, STEAM VALVES. TONS OF QUARTZ RAISED BY THE PORT MINING & CLUNES COMPANIES TO MARCH 1880 1123365 TONS & GOLD 465,168 OUNCES, 7 DWTS, VALUE 1860, 925,54 POUNDS. EXHIBITED BY R.H. BLAND, CLUNES.LITHOGRAPH DEPICTING SURFACE WORKS OF THE PORT PHILLIP & COLONIAL MINING CO. LIMITED AND INTERIOR OF MACHINE HOUSE.local history, illustrations, lithograph, mining.

This MEZON brand button accordion was made specifically for Lyons, Musical Instrument Importer, 207 Bourke Street Melbourne, as can be seen on the embossed lettering on the top of the accordion. The hand inscribed nameplate indicates that the owner was T H Betts. On August 19th, 1903, Michael Edward Lyons applied to the Trade Mark’s Office of Sydney for registration of “The Invented word “MEZON” to be applied to musical instruments. In 1908 he was advertising himself as sole agents for MEZON accordions. He had been at that address for 15 years (since 1893) and was moving to larger premises at 256 Bourke Street, Melbourne. Still at this address in 1925, Lyons advertises MEZON accordions as “The ideal Xmas present, Maker your friends happy, This Xmas let the Present be a MEZON”. There was a choice of three styles: The Organ, The Wonder and The Grand Organ. They came with a Fibre Case with Lock and Key and a Leather Handle. The promise was “They Give Satisfaction”. They were obtainable at all stores or from Sole Distributors in Australia. In 1927 the MEZON was sold by Albert & Sons in Western Australia, Victoria, New South Wales and Queensland as well as by Lyons in Melbourne. The favoured German accordion brands were Monarch and Sterling, which were made by the International Accordion Company in Leipzig, Saxony, Germany. The company was founded in 1871 by Ernest Deines and made a variety of musical instruments. The company closed business in 1834. The International Accordion Company’s accordion range made the International brand and others such as MEZON, Globe, and Dienst. Australia imported the MEZON brand. American companies imported a range of the popular German branded accordions until World War II, when they were no longer available. In general, accordions produced after the war were not as high a quality and not loud enough to be heard over the electronic guitars and the drum kit of the bands. This accordion represents the type of musical instruments used in the late 19h and early 20th century, locally and Australia wide. In colonial Australia musical instruments like this one were imported from Germany as well as other countries. At that time, German made instruments represented good quality. This accordion is significant for being especially imported into Australia by a Melbourne retailer. Music was a part of family and social life, associated with dances, song and general fun.Button accordion with case. Accordion with steel reeds, three bass valves and ten treble valves. It is coloured black with very dark green trim, decorative silver metal reinforcing on main corners, gold reinforcing on corners of the bellows and delicate printed, gold printed patterned trims. Hand support for buttons is made of fabric. Folds of the bellows are light coloured with fine dark pattern. It has a nameplate on the front. Black wooden case has red lining, two brass hinges, two brass hook and eye catches and a swivel brass lock. The base of the case has a loose brass fitting. The top has a thin metal handle. Inscription on hand inscribed name on front, label inside case lid, silver reinforcing, leather on bellows top, and frame of accordion. Manufactured with the brand MEZON in Saxony, Germany, for Lyons of Melbourne. Once the property of T H Betts.Printed on label “MEZON ACCORDEONS.” Impressed in metal corners and reinforcing “MEZON” with logo [circle enclosing entwined capital D and E] “MADE IN SAXONY” Embossed in gold on frame “Made in Saxony”, “MEZON Accordion/ manufactured for LYONS / MELBOURNE, Bourke Street” Name inscribed by hand “T H Betts”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, mezon accordion, lyons, made in saxony, t h betts, betts, mezon, squeeze box, musical instrument, button accordion, germany, michael lyons, international accordion company, ernest deines, circle enclosing d e, d e, e d, german accordion

On one face are five separate items regarding the fundraising including one by the Secretary of the committee Mr W Sewell, a donation by Mr M B John of John's Valves, a note regarding a half-holiday for schools, Friday 28/7 for the fair. On the reverse side is part of a cutting regarding this event, the boxing and wrestling and a cheque from Broadway Park where a greyhound meeting was held on 15 July. These two items have been trimmed. Further date research is required.Demonstrates newspaper reporting re the Sylvia Mitchell fund raising.Set of 2 newspaper cuttings pasted onto a sheet of card.most popular conductress, sylvia mitchell, tramways, sec, red cross, events

Released in August 2004, the VZ series was a minor facelift of the previous VY series that featured a new V6 engine in different tune guises. The powerplants included 175 and 190 kW (235 and 255 hp), 3.6-litre Alloytec V6 engines in place of the older 3.8-litre Ecotec V6. Other changes to the V6 was the loss of the supercharger that was included in the S models The VZ Commodore was available in several model variations, most of which carried over from the VY range, with the exception of the newly introduced SV6, a specification level that replaced the S range. All models in the Commodore range (Executive, Acclaim, Berlina, Calais, SV6, SV8 and SS) were available as sedans. The advanced 3.6-litre Alloytec engines were more powerful, responsive and fuel-efficient than the outgoing Ecotec V6. To achieve 190 kW (255 hp), the Alloytec V6 gains variable valve timing on both inlet and exhaust sides as well as a dual stage intake manifold, while the 175 kW (235 hp) version retains variable valve timing on the inlet side only. Sales of the VZ series failed to match those of the preceding VY in light of rising small car sales, higher fuel prices and growing interest in the whole new replacement, the VE series. Selected models bring advanced active safety features that electronically assist the driver to maintain vehicle control in emergency situations. VZ Holden 4 door sedan with red body paint and fabric upholsteryLion badge front grille,V6 badge on mudguards. Executive badge on RHS of boot and Comnmodore on LHS. Lion badge on middle of bootvehicle, vz holden, car

The main component of the nitrous oxide gasometer is a metal urn-shaped chamber form which an outlet valve and circular moulded tap allows for the flow of gas. A frame sits atop the chamber and comprises ornately-decorated metal flourishes and three anchoring pipes, two attached to each side of the chamber and one attached to the centre of the lid. The gasometer sits atop an ornately decorated cast iron stand with a circular base.gasometer, nitrous oxide, storage, anaesthesia, dentistry, chloroform, ether

John Snow was England's first full-time anaesthetist. He noted that the common mode of administration of ether was liable to lead to anoxia, and invented this inhaler to overcome this. Later, he turned to chloroform anaesthetics without a death. He administered chloroform to Queen Victoria for the birth of Prince Leopold, this largely being responsibe for overcoming objections to the use of analgesia in childbirth. This replica was made in 1950 and gifted to the museum by A Charles King Esquire.The complete object is in six parts and made up of a brass metal box with swing latches in the middle section for secure closing. The lid is in two parts with one half that comes off entirely. Inside the box is the circular inhaler, detachable tube and dark yellow/green fabric covered tube. The mask made of brass and chamois leather with an exporatory valve does not fit into the box. A brown fabric case has been made to store the inhaler in.Etched onto the detachable lid, This replica of the Snow's Ether Inhaler of 1847 was made by John Henry Hawkes of A. Charles King Ltd. August 1950.john snow, chloroform, ether, queen victoria, prince leopold, john henry hawkes, a. charles king

US Army Rogers M-1950 Stove Portable Gasoline Burner Vietnam Era Removable Hand pump set into base to pressurise fuel Maroon plastic flame control valve handle, that swings left to right through 180 degrees. Purpose built service spanner secured between burner support legs. Operating Instruction have worn off. Significant damage to Safety warning label. Still fully operational1 Gold adhesive label with Operating Instructions 1 Red adhesive label with Safety Warning under instructions

Handwritten document (15 pages) with two page blue document appended at back. On front of handwritten document : specifications for machinery and ironwork engineer and ironfounder for building plant for the Hercules & Energetic Goldmining Comp., Sandhurst. The contractor is to supply and deliver on the claim of the above Company the following machinery &c - and to get proper receipts for same from the Contractor for the erection of plant. Areas in specifications include: repairs to engine and boiler set-up & c., safety valve, whistle, cylinder, stop valve, piston, eccentric, crank shaft, feed pump & eccentric, flywheel very extensive descriptions of all areas, some with diagrams. Appended to back of document Ironfounders general conditions of contract work required in the making and delivery on the claim machinery &c for a winding plant for the Hercules & |Energetic Co., Drawings prepared by Wm Middleton, Engineer, Sandhurst. Agreement entered into this twelfth day of October, 1878, by and between Messrs Mitchell & Osborne and Hercules and Energetic GMC. Signed by Mitchell & Osborne, per ? Dobson., Wm Middleton ?.bendigo, mining, hercules & energetic mine

Bogong Hotel at Tawonga. See KVHS 0965, KVHS 0991 - KVHS 0993 inclusive.Bogong Hotel an important social icon for Kiewa Valley farmers, visitors, and KHES workers. The Bogong Hotel was 125 years old when it was burnt down in December 2011.1. 2 small china cups- white with black and green lines around the top and 'Bogong Hotel' logo 2. 2. glass cups with a handle. Glass is smooth on outside and has vertical 'waves' on inside 3. 1 small glass jug with handle and pouring lip. It has 5 rings of embossed glass around it 4. 1 burnt fire valve handle - T shaped for attaching to a surface 5. burnt bottle topbogong hotel, tawonga, crockery, fire at bogong hotel

Black and white photograph. One male with right hand on wheel of control valve in the compressed air pipe outlet of a two stage or compound air compressor with con rod and crank shaft to a large flywheel. Two belts to a vertical governor. Outgoing air pipe vertical to ceiling of enclosing building. Inscriptions: Nameplate or bed plate 'A Roberts and sons, Engineers, Bendigo' Lower left corner handwritten 'with A Rob. Compliments' On back - 'Compound Air Compressor'.machinery, compressors, compound air compressor, worker, male

Black cover 32 page book, title in gold print on front; 'The Slide Valve, Rose' Inscribed on flyleaf ' George A.E. Richardson, Engine Driver,Long Gully. Green circular stamp ' Royal Historical Society of Victoria, Bendigo Branch'. Book published in 1895 by Henry Carey Baird & Co., Industrial publishers, Booksellers and Importers, 810 Walnut Street, 1895'. Includes a catalogue of practical and scientific books published by Henry Carey Baird & Co.Joshua Rose, M.E.person, bendigo, george richardson

Large unused diamond shaped Austox label made for use on carbon dioxide cylinders. Black and beige background, with beige and red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USES. / AUSTOX [logo] / COMPRESSED / CARBON DIOXIDE / KEEP COOL [in red] / WEIGHTS: / GROSS..........LBS. ........OZS. / TARE..........LBS. ........OZS. / NET..........LBS. .......OZS. / Contents Imp. Gallons / USE NO OIL OR GREASE ON VALVE [in red] / AUSTRALIAN OXYGEN / AND / INDUSTRIAL GASES / PTY. LTD. / MELBOURNElabel, cylinder, carbon dioxide, cig, commonwealth industrial gases ltd, compressed carbon dioxide, austox, australian oxygen and industrial gases pty ltd

In 1913, Mark Cowley Lidwill designed a machine for the purpose of mechanical or insufflation anaesthesia. The Lidwill machine was a portable machine weighing 7kg that could easily be packed into two small bags. The machine involved compressed air being delivered to an ether vaporiser. An ether/air control device allowed varying concentrations of ether to be delivered. The ether vaporiser could be immersed in hot water to prevent cooling and the ether temperature was measured. From the vaporiser, the ether/air mixture went through a trap bottle, then to a crude mercury blow-off valve and subsequently to the patient.Large leather suitcase style bag divided into two levels containing and insufflation anaesthesia machine.insufflation, mark cowley lidwill, thoracic surgery, positive pressure