Showing 41 items
matching laryngoscope
-
Geoffrey Kaye Museum of Anaesthetic History
Chevalier Jackson's laryngoscope, circa. 1901
Chevalier Jackson was a surgeon who designed this laryngoscope. Jackson contributed a number of important innovations to direct laryngoscopy, while developing a unique mastery of the technique. Ultimately, he combined this endoscopic proficiency with open surgical techniques.The U-shaped laryngoscope comprises a moulded handle and a long endotracheal insert which has a small connector to allow for a light to illuminate the patient's throat. The item is chrome-plated.Engraved on connecting shaft: Jackson's Laryngoscope, 1901.laryngoscope, chevalier jackson, endoscope, anesthesia, distal illumination, chrome, 1901, jackson's -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope
Metal laryngoscope in two parts. A round hollow handle with a textured grip and a screwed in base for holding batteries. The metal blade screws in to the handle and has a moulded section for a small light bulb. Engraved in to top of blade, D.A. Engraved in to base of handle, B.T.S. / R.W.H. D.A. Stamped in top of the handle, PAT.NO.683731 Stamped in top of the handle, BRITISH [indecipherable]laryngoscope, light bulb, battery -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Flagg, circa 1915
Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Macintosh
A laryngoscope is an instrument used to view the larynx (voice box), which is the opening to the trachea and lungs. It consists of a “blade,” which goes into the patient’s mouth, and a handle. Prior to 1943 when Macintosh introduced his curved blade, most laryngoscope blades were long and straight. The straight blades were used to directly hold the epiglottis. Macintosh’s curved blade works differently: it indirectly opens the epiglottis by applying pressure to a space between the root of the tongue and epiglottis, called the vallecula. The flange running along the left lower edge of Macintosh’s blade was also a novel innovation. It was designed to move the tongue to the side, which improved the view of the larynx and made more room for a breathing tube. The Macintosh Laryngoscope remains one of the most popular blades worldwide. (Source: Wood Library Museum) This laryngoscope was previously owned by John Mainland, as evidenced by the name etched into the handle. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.Oblong shaped handle with textured grip. Attached is a laryngoscope blade in a cruved shaped with light tube running through one side.Etched into top of handle: J.F. MAINLAND •Stamped into top of handle: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into base of handle: CLOSE [arrow] •Etched into base of blade: MAC / 4 •Stamped into side of blade: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into side of blade: STAINLESSmacintosh, robert reynolds, new zealand, laryngoscope, mainland, john, alfred hospital, moon landing -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Flagg, circa 1915
Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa) -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Chevalier Jackson, Circa 1913
Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, c 1900
Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Magill's laryngoscope
This object is Magill's adaptation of the battery handle in the form of an "inserting tracheoscope". Introduced in 1935 for one-lung anaesthesia, it is combined with an endotracheal tube, the central part of which is a latex-covered wire spiral, and a bronchus blocker. In use, the tube was fixed to the holder and the whole apparatus inserted as a ttracheoscope. At the carina, the blocker was inserted into the bronchus and the balloon (now perished in this example) inflated. The holder was then removed leaving the endotracheal tube and blocker in place. The bronchus blocker consists of gum elastic on woven silver wire and has a suction channel opening at the tip. in other stages of development of Magill's laryngoscope, the original pattern blade was adapted to the battery handle, at first in a fixed arrangement and then with interchangeable blades of different sizes. Later still, the folding handle was introduced.This U-shaped chrome plated laryngoscope comprises an endotracheal tube used to facilitate access to the patient's airway, wire spring attachments and a cylindrical handle with provisions for battery to illuminate inside the body during use.Embossed on the central shaft of the item is 'A Charles King, Ltd', the maker's details.laryngoscope, anaesthesia, macgills, chrome, battery, a charles kind ltd -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Flagg, circa 1915
Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
Curved laryngoscope blade with light bulb only. It has visible scratches on top and back side of the blade. A rusty washer under the handle joint. Is also present in the blade base back side a curved shaped lamina attached by a screw. This blade correspond to a large size (adult) laryngoscope blade. It has stamped on the base inscriptions about: trade mark (PENLON), place where it was made (ENGLAND) and its material (Stainless).Stamped on the blade base, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped on the back edge of the blade, STAINLESSblade, penlon, light bulb, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Black and white photograph displaying different anaesthetic equipment. At the top of the photograph is a dry-cell battery, two Jackon's laryngoscopes, one of which has been modified, and a lamp carrier which has been withdrawn from a laryngoscope. At the bottom of the photograph are two Magill's rubber catheters and two different types of gum-elastic catheters.Handwritten in blue ink on reverse and underlined: Fig 39laryngoscope, jackson's laryngoscope, lamp carrier, dry cell battery, magill rubber catheters, gum elastic catheter -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh
Curved laryngoscope blade and handle. The laryngoscope blade is identified as a MAC 3 RIESTER blade and is attached to the textured handle with a serrated grip for ease of use. The handle is also a battery deposit which has stamped on the lid base the manufacturer's name and the place where it was made.Stamped on the lid base of the handle, Penlon R [trademark] / Made in U K Printed on the blade base, MAC 3 RIESTER Printed on the blade base, STAINLESS STEEL C E / GERMANY Stamped on the blade base, TDD Stamped on the blade base, Gairway, laryngoscope, penlon, united kindom, germany, mac 3 reister, blade, the alfred hospital, melbourne, macintosh -
Geoffrey Kaye Museum of Anaesthetic History
Illustration
An illustration hand drawn in black ink on paper showing intubation of the larynx on a reclining head and neck, which is drawn as a cross section showing the inside of the head and the airways. The Chevalier Jackson's laryngoscope is being introduced at the angle of the mouth.laryngoscope, larynx, chevalier jackson's laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Illustration
An illustration hand drawn in black ink on paper showing intubation of the larynx on a reclining head and neck, which is drawn as a cross section showing the inside of the head and the airways. The beak of the Chevalier Jackson's laryngoscope is advanced towards the tip of the epiglottis.laryngoscope, larynx, chevalier jackson's laryngoscope, epiglottis -
Geoffrey Kaye Museum of Anaesthetic History
Illustration
An illustration hand drawn in black ink on paper showing intubation of the larynx on a reclining head and neck, which is drawn as a cross section showing the inside of the head and the airways. The beak of the Chevalier Jackson's laryngoscope is inside the mouth and engaged with the epiglottis, which is lifted forwards so the glottis is exposed.laryngoscope, larynx, chevalier jackson's laryngoscope, epiglottis -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Shipway, c 1920
Shipway’s metallic medium size laryngoscope with bulbous curved handle. The section connecting the handle to the straight blade has a screw. Lateral orifice to attached light bulb connection which is not present on this item. The surface is very rusty and quite battered, presence of oxidation on its surface and discoloration of the metal. Has an inscription about the manufacturer.Stamped on its handle, MAYER & Co. LONDONshipway laryngoscope, laryngoscope, metal, mayer & co. london -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Soper, circa 1947
A Soper adult size laryngoscope blade with bulb only. The item has several deep scratches over the surface and below of the blade. Oxide spots are present over the blade surface. The top surface of the blade is slightly bended. The end of the blade has a perforated line. On the base of blade is etched the word 'Whittam'.Engraved twice on the base of the blade, Whittam / Whittamsoper, blade, laryngoscope, adult, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh
Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine -
Geoffrey Kaye Museum of Anaesthetic History
Instrument - Laryngoscope, Chevalier Jackson, Circa 1913
It is likely that this object belonged to Dr Giles.Chevalier Jackson medium size steel made laryngoscope. Hexagonal shape design on handle and arm blade with a thumb support at the handle angle, missing the bulb light and all the system to support it. Deep scratches over the top and under blade with presence of dust marks over the handle, arm and inside the blade canal. Also has a grey paint mark over the top blade area. No stamped inscriptions are present just a label attached with a possible owner's name and a reference code to the museum old catalog.Attached label hand written inscription, Giles / S 4. 13chavalier jackson, laryngoscope, stainless steel -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
A curved laryngoscope blade with bulb only. Its has an engraved detail about the place it belonged. Also, it has stamped on the blade the maker's seal and its material. At the base of the blade is stamped the place where it was made. The top of the blade has some scratches and the base has an oxide spot over the name of the place it was made. Engraved on the blade, Anaes. Dept. Alfred Stamped on the base of the blade, MADE IN ENGLAND Stamped on the blade left side, STAINLESS Stamped on the blade on top of the base a circular seal with the letters, BOC laryngoscope, light bulb, glass, blade, boc, british oxygen company -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Macintosh, Circa 1943
"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Soper, circa 1947
A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
Curved laryngoscope blade with light bulb only. Etched on the base of blade is engraved the word 'Whittam'. It has visible and deep scratches on top of its blade and back side. Also has on the edge of the blade a spot of oxidation and some green paint stains under the blade surface. Visible oxidation is present in the blade base back side over the small lamina attached by a screw. Engraved the presumably owner's name, Whittamlaryngoscope, blade, light bulb, curved laryngoscope, glass, whittam -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Laryngoscope
Laryngoscope handle, with screw in connector for blade. It has a textured handle with a serrated grip for ease of use. The handle is also a battery deposit. Stamped on the base of the handle is the trade mark name details (PENLON) and the place where was made (ENGLAND). The piece has some slight scratches and surface subsidence because of its use. It has a residual marks from an used sticky tape on the base. Stamped on the base, REGD TRADE MARK / P E N L O N / MADE IN ENGLANDlaryngoscope, handle, screwed laryngoscope, screw, penlon, battery -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh
Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh, 1950
Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, 1930
Magill laryngoscope with a battery in the handle was one of first of its kind This piece of equipment is made of stainless steel and has a canal on its left side and a handle to put batteries inside of it and it has attached a round screw to make it extendable. This object also has an stamped inscription and on the other side it has the manufacturer details. Stamped A.CHARLES KING.LTD Stamped REG.NO.749019 Stamped STAINLESSmagill, ivan, battery -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, 1926
Ivan Magill (1888-1986) designer, this piece was designed in 1926 along with other anaesthetic equipment.Chrome plated straight complete Magill laryngoscope in medium size format, with attached light bulb. Cylindrical handle for battery deposit and with a wavy hand grip for easy handling. Serrated and screwed lids on top and base of the handle grip for insertion of batteries and checking of electrical contact stud. The handle also has a metallic switch without any instruction of use. The arm of the handle has a detachable screw to adjust extendable blade position and firmness. The light bulb is attached to a metallic tube connector to the handle arm which is just pressed to the contact point base. The blade has a oxidation spot under the blade. The piece in full has several scratches marks mostly founded in handle, arm and top blade areas. Two stamped inscriptions are present on the arm area, the manufacturer name and register number.Stamped on the arm of the handle lateral side, A.CHARLES KING Stamped on the arm of the handle opposite lateral side, REG. NO. 74901[9]magill, a. charles king ltd, regi. no. 749019, switch, laryngoscope -
Ballarat Base Hospital Trained Nurses League
Laryngoscope Holder
Used for biopsies - support instruments.laryngoscope, holder