Showing 6964 items
matching tools-and-equipment
Container (1468)
Equipment (1977)
Functional object (4244)
Instrument (424)
Machine (363)
Tool (1753)
Vehicle (156)
Weapon (465)
-
Melbourne Tram Museum
Functional object - Badge, mid 1950's
Metal badge stamped - triangular brass base with metal pin and clips on rear, painted blue, green and white with the words "Electric Traction Association" for the Australian Electric Traction Association - mid 1950's. First AETA badge. Confirmed as such by Bob Merchant of the Sydney Tramway Museum. by e-mail on 23/1/2017 to Warren Doubleday. Note - for photographic purposes the badge was supported by the back of another badge and is not part of the badge itself.trams, tramways, badges, aeta, membership -
Ballarat Tramway Museum
Functional Object - Trolley Wire Sample
Piece of worn trolley wire (copper, probably cadmium copper) taken from north bound trolley wire between poles 9 and 17 (Loop and St. Aidans Drive) on 4/3/1997 during replacement operations. Is badly worn on one side. OK on the other side - slightly curve with worn side on the outside of the curve. Green (Oxidized) and sides, dark brown on top. Has been cut at either end. Images added 3-12-2016 See p14 of Section 65 of ICS Manual Tramway systems etc. London c1921.ballarat, overhead, fittings, trolley wire -
Stawell Historical Society Inc
Functional object - Realia, Biscuit Barrel
Ceramic Biscuit Barrel with lid. Grey Double Banding top and bottom. Rose Stem with flowers and Butterfly Grey RotundaRoyal Botanic Gardens Kew Fine China Biscuits written in Pink Rose Centifloria P.F. Rodoutechinaware container -
Whitehorse Historical Society Inc.
Container - Money box
Handmade childs saving toyWooden handmade childs money box. Castle shape twin towers. Coin depositor 'child' pivot between towers with very quick coin depositor. Plywood varnished and painted with hand fret workhandcrafts, woodwork -
Flagstaff Hill Maritime Museum and Village
Functional object - Lamp, Probably second half of 19th century
OIL LAMPS Oil had been burnt in lamps at least since the Palaeolithic age, and the cheapest light fittings used in Victorian homes had changed little since then, with a simple wick protruding from a small container of whale oil or vegetable oil. However, much brighter and more sophisticated lamps had emerged late in the 18th century, the most important being the Argand oil lamp. This lamp had a broad flat wick held between two metal cylinders to form a circular wick, with air drawn through it and around it. This in itself was a revolutionary idea, but its inventor, Aimé Argand also discovered that by placing a tube or 'chimney' over the flame, the hot gases from the flame rose rapidly creating a draught and drawing air in from below. Fanned by a draught from both inside and outside the circular wick, the poor spluttering flame of early lamps was transformed into a bright, efficient light source (see illustration). The one disadvantage for the Argand oil lamp and its many imitators in the early Victorian period was that the best oil then available, colza, was so thick and viscous that it had to be fed to the wick either by gravity from a reservoir above, or pumped up from below. Most colza oil lamps have a reservoir often shaped like a classical urn to one side which in some fittings obstructed the light. The Sinumbra lamp got around the problem by having a circular reservoir around the base of the glass light shade. One of the most significant improvements of the Victorian period was the introduction of paraffin. Patented in 1850, the price of the new fuel fell dramatically following the discovery of oil in Pennsylvania, USA. As paraffin was much lighter than colza the reservoir could be placed below the flame, enabling many new designs of light fittings. One of the most successful paraffin lamps was the Duplex burner introduced in 1865 which had two wicks side by side and, like the Argand lamp, a clear glass chimney with air drawn from below. Most lamps also had a larger shade around the chimney often of opaque glass to diffuse the light. The shades or diffusers provided an opportunity for decoration, and a variety of shapes, colours and patterns were used. The amount of light which can be produced by a wick is limited by the surface area of the wick and the amount of fuel and air able to reach it. As fuel burns at the tip of the wick only. The gas mantle, on the other hand, provides a much larger three-dimensional surface, and is far more effective as a result. Invented by Carl Aur von Wesbach in 1885, the incandescent mantle was the last major breakthrough in oil and gas lighting of the period, before both succumbed to electric lighting. The mantle consists of a skirt of silk or cotton impregnated with a non-inflammable mixture (thorium and cerium), suspended over a fierce flame. When first ignited, the cotton burns away leaving fine, brittle filaments of non-combustible material in its place which glow white hot or 'incandescent'. The mantle works best with either gas or a fine mist of paraffin produced by a pressurised reservoir which is still widely used in camping lamps today, producing a bright, warm light to rival an electric bulb. https://www.buildingconservation.com/articles/lighting/lighting.htm http://www.artandarchitecture.org.uk/stories/lighting/lighting4.html#:~:text=Oil%20had%20been%20burnt%20in,whale%20oil%20or%20vegetable%20oil.An item of great importance in any home before gas or electricity was available.Kerosene lamp, ceramic, with metal top and wick. Has handle at side and floral hand painting around the body. Glass cover. Metalwork is rusty.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, oil lamp, heating, lighting, ceramics -
Mont De Lancey
Functional object - Swingletree, Unknown
A wide flat green painted wooden triangular shaped swingletree with a steel bar attached under the wooden section. There are two oval rings joined at each end and there is a wider steel bar in the middle with two chain rings joined to it. It was used to balance the pull of a draught horse or other draught animals when pulling a vehicle.horse accessories, swingletree, horses, horse tack -
Kew Historical Society Inc
Functional object, Articulated Metal Clothes Hanger, 1945-1955
Folding metal clothes hanger joined by stretch fabrichousehold items, clothes hangers -
Trafalgar Holden Museum
Functional object - Bridle, Circa 1900
Used to control a horse while it was workingManufactured and Sold by Holden and FrostBlack leather bridle set including blinkers and head banddecorated with metal studs across headbandbridle, equestrian, black leather -
Greensborough Historical Society
Weapon - Artillery Shell Case, Howitzer shell case, 01/08/1917
Howitzers were used on Western Front in 1917 by British forces. Brass artillery shell case4.5 HOWr II; B. A. 1817; DCPC 179 M; CF; 1917world war i, artillery shell cases, howitzers, artillery -
Moorabbin Air Museum
Machine - De Havilland Ghost Mark 105
Historical Details: . Description: The de Havilland Ghost (originally Halford H-2) was the de Havilland Engine Company's second turbojet engine design to enter production and the world's first gas turbine engine to enter airline (BOAC) service. A scaled-up development of the Goblin, the Gh. Level of Importance: 649440 -
National Vietnam Veterans Museum (NVVM)
Functional object, Australian Military Forces - Pocket Book, South Vietnam
Part political doctrine, part tourist guide. Thousands of these pocketbooks were issued to Australian and New Zealand military personnel during the Vietnam War.Cover of small soft covered dark green booklet. Australian Military Forces/ Pocketbook/ South Vietnampocket book, vietnam war, army, notebook, australian army training team vietnam (aattv), aattv -
National Vietnam Veterans Museum (NVVM)
Functional Object - Clock, miniature
Metal Clock/watch type : Clock (Miniature) not working. Smith and Wesson on Clock faceCross Neil E. 078408223 A-POS DAV (USA-Aust)clock -
Whitehorse Historical Society Inc.
Container - Tobacco pouch
Round rubber pouch for storing tobacco. Base of pouch: makers work in two concentric rings: Outer ring -Blaque Automatique Paris' Inner ring - 'La Francaise Marque Deposee' In centre of two rings - a central image of a bee with wings outstretched. Top of ppouch: opens by twisting rubber ein to raise neck of pouch and provide aperture opening/ Blaque Automatique Paris La Francaise Marque Deposeesmoking, tobacco pouch -
Glenelg Shire Council Cultural Collection
Functional object - Childs Fishing Rod, Jarvis Walker, c. 1960
Child's Jarvis Walker fishing rod with black plastic open face reel. 'JARVIS WALKER' and 'LITTLE JIM DELUXE' printed on rod -
Flagstaff Hill Maritime Museum and Village
Functional object - Light Bracket, Before 1878
This pressed brass artefact is a highly decorative side bracket for distancing a gas lamp flame from the internal wall of a building. It is hollow and made of light gauge metal, with an innovative aesthetic design, but no internal piping to transport gas. It was recovered from the wreck of the LOCH ARD. There are similar artefacts in the Flagstaff Hill collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal. Some of the cargo was destined for display at Melbourne’s first International Exhibition in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s south west coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens was already well-advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas-lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its own system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its own gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, it is probable that the 4 cases of brass gas light fittings on board would have found a ready market.The LOCH ARD shipwreck is of State significance — Victorian Heritage Register S417. The gas light bracket is an example of lamp fittings and plumbing from the late 19th century.A pressed brass lighting bracket recovered from the wreck of the LOCH ARD. It would be used for attaching, but simultaneously offsetting, a gas nozzle to a wall. Highly decorative in an unusually ‘modern’ or ‘art-deco’ style, with sweeping curves dissected by angular geometric pattern, and supporting a short, vertical bar with a gas nozzle on top. It is constructed of light gauge metal, with splitting along seams, and some delicate tracery is missing. Outer surface has been polished, removing sediment, but greenish oxidation remains in dents and joins. warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting -
Flagstaff Hill Maritime Museum and Village
Instrument - Calipers, 1930-1955's
This set of calipers was used for measuring and marking in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This calliper is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This calliper was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Calipers, metal, two arms joined by hexagonal bolt. Made by Moore & Wright, Sheffield, England. Maker’s name pressed into metal on arm. Use to measure thickness of materials. This set of calipers is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “MOORE & WRIGHT / SHEFFIELD ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, technical drawing instrument, calipers for drawing and measuring, moore & wright of sheffield england, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument -
Vision Australia
Functional object - Object, Wooden Braille board
Wooden braille board with wooden header, hinged with brass hinges and small pins to clamp the paper to the board. Metal frames on each side hold a rod across the front of the board. The rod is fixed to two moveable parts which can go up or down the board as required.1 wooden back board with metal flanges either sideroyal victorian institute for the blind, braille equipment -
Montmorency/Eltham RSL Sub Branch
Weapon - 6-Pounder Shell Case, E.C.C, 1942
The Ordnance QF 6-pounder (57mm) 7 cwt was a British anti-tank gun used by both British and Commonwealth forces during World War II. Different versions of the gun were used on tanks, armoured cars and naval vessels. One version - the Molins Gun - was even used on an aircraft. Designed to replace the QF 2-pounder (40mm) it was first used by Australian troops during the El Alamein battles in 1942. The guns were also made in Australia by General Motors Holden who produced 615 of them, delivering the first gun in July 1942. The United States Army also adopted it and called it the 57mm Gun M1. Ammunition was primarily armour-piercing but in March 1944 a high-explosive round was introduced. The shell case shown here would have contained a 2.86kg (6lb 5oz) armour-piercing projectile. Brass Shell CaseOn Base of Cartridge: 6PR 7CWT LOT E.C.C. 236 On central firing disc: No. 15 II 11C 41 115 TH 1- -42 7 1942 F. T -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Instrument - Vulval douche associated with Dr Frank Forster
Bakelite douche, consisting of three sections and two caps. Can be disassembled for cleaning. -
Whitehorse Historical Society Inc.
Functional object - Padlock
Alloy with brass fitting for key. Assembled and riveted possibly by hand . Heavy and old fashionedsecurity - locks, padlock -
Clunes Museum
Functional object - BARBED WIRE
THIS EXAMPLE OF BARBED WIRE HAS BEEN HAND MADE BY CONVICTSNilbarbed wire, fencing -
Whitehorse Historical Society Inc.
Functional object - Pencil joiner
From collection of Betty McPheeA metal band to join stubs of pencils together. Has two pencils attached.domestic items, writing equipment -
Bendigo Historical Society Inc.
Functional object - PAIR FLOWER VASES
Pair square shaped vases, rough cast cream coloured surface with pottery dark pink rose and green leaves attached.ornaments, ceramic, vase -
Vision Australia
Container - Object, SEDA collection box
A plastic moulded yellow Labrador puppy in white harness with raised nose sits on a blue hollow drum, waiting for coins to be inserted into its head. On the drum, a paper label reads "please help me become a .... seeing eye dog 1800 037 773". A golden Labrador puppy and the Seeing Eye Dogs Australia logo of a paw print with an eye in the middle completes the wraparound label. This type of fundraising tin is designed to stand on counters and be secured to a desk via the metal chain at the back of the collection box. 1 plastic money collection box with metal chain attachedseeing eye dogs australia, fundraising -
National Vietnam Veterans Museum (NVVM)
Functional Object - Cigarette Lighter
Silver zippo cigarette lighter with inscription. If I had a farm in Vietnam and a home in Hell, I'd sell my farm and go home. Vietnam 69-70. Note: a US Nickel coin attached to the back, "Vietnam 69-70" zippo lighter, vietnam -
Glenelg Shire Council Cultural Collection
Functional object - Block of Typesetting, n.d
Thought to have originated from the Portland Guardian Newspaper.Block of typesetting, letter to the editor (Guardian?) from Dawn Barclay. -
Mission to Seafarers Victoria
Functional object - British Apothecaries’ Weights (pre 1864)
This type of weights was used in the 19th century.Eleven brass, square shaped weights cut roughly square and filed to correct weightFront: Numeral with Unit in Script Lettering/Reverse: Apothecary Symbolvolum collection, weights, apothecary, pharmacy, medicine, drugs, medication -
Glenelg Shire Council Cultural Collection
Functional object - Bottle Labels, n.d
Set of 13 bottle labels, Jeffrey Bros Superior lemonade and rasberry. Orange and royal blue background, blue and white print.jeffrey bros, cordial factory, casterton -
Queenscliffe Maritime Museum
Instrument - Navigational Compass
A round hand held navigational engineer compassEngineer Compassnavigation, compass -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid to late 19th century
A mass produced hand made bottle made for containing sparkling wine no history or manufacturing provenance currently available.This bottle is an example of bottles produced in the mid-to-late 19th century. It is currently not associated with a historical event, person or place at this time and is being used to augment Flagstaff's village display.Bottle, dark green glass cork in neck, concave base. Handmade.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bottle, green glass bottle, glass technology