Showing 4685 items
matching tools-and-equipment
Container (1481)
Equipment (2019)
Functional object (4292)
Instrument (445)
Machine (371)
Tool (1763)
Vehicle (158)
Weapon (467)
-
Robin Boyd Foundation
Container - Ring-binder
Patricia Boyd was on the Board of the Australia Opera for several years. The Walsh St house holds a significant collection of opera recordings. Penleigh Boyd wrote this in The Age obituary to Dorothea Patricia Davies AM (3 Jan 1921-5 Nov 2009). "In 1988, Patricia was appointed a Member of the Order of Australia for her service to opera involving many years of voluntary work on the board of the Australian Opera - work which she greatly enjoyed involving travel, music and meeting many interesting and entertaining people. She was also a life member and former president of the National Gallery of Victoria Women's Association." The Walsh Street Archive also holds the Certificate and the medals associated with this honour (items D502 and F126 respectively).Black hard plastic 2-ring binderMrs Patricia Davies Board Meeting 12/4/84 The Australian Opera -
Whitehorse Historical Society Inc.
Tool - File
Part of collection of carpenters' tools used on sailing ships from England to AustraliaMetal file with pointed endtrades, carpentry -
National Wool Museum
Tool - Drench Gun, 1940-1950
There are several different designs of drench guns within the NWM Collection that show the change in their development over time. On the left side of this gun white paint indicates the adjustable dose lever. It is a sliding scale from 10 to 0 cubic centimetres of liquid (now typical measure in millilitres). It also has a large diameter curvature suggesting this gun was typically used for dosing ewes as opposed to lambs. The manual adjuster helped to minimise cases of overdosing which can be fatal for livestock while the additional curvature helped to ensure the liquid reached the desired location within the sheep’s mouth. This desired location is on the left rear of the sheep’s tongue (from the sheep’s point of view) as this is where the oesophagus is located. The main risks are that drench may be delivered into the lungs via the trachea or “windpipe”, which can also prove fatal. The opening to the trachea which leads to the lungs is in the middle of the back of the throat. Another risk is the throat can also be damaged due to rough handling.Silver metal with black finishing drench gun. Large curvature tip on gun protrudes from the body which feature a thin squeezable trigger to the front of the body. The main bulk, which the trigger is squeezed towards, has badge which reads “Manufactured and designed by N.J. Phillips Pty Ltd, Sydney”. Behind this body is silver tubing featuring attachment point for the tubing which would have carried the liquid drench into the gun. The small section of tubing still attached has a yellow/orange appearance from remanence of drench which would have been this colour.Left lettering: 10CC 5CC 0/ 7.5 2.5/ Left rotated lettering: MANUFACTURED/ & DESIGNED BY/ N.J.PHILLIPS PTY. LTD./ SYDNEY . AUSTRALIA/sheep drenching, veterinary instruments -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1878
This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. This bottle is now part of the John Chance collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late-1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. Its significance is increased by also being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late-1960s to early-1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best known, shipwrecks in Victoria’s history.Bottle, black glass. Thick matt body, with slightly bumpy texture, areas with sheen, colour imperfections. Tooled cork-top finish with ring below, slightly bulged neck. Shoulder has a line where shoulder meets body. Body tapers inwards to base. Heel varies in width. Pushed up base has pontil mark. Handmade, dip mould. No inscriptions.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, black glass, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle -
Vision Australia
Vehicle - Object, Mitchell bicycle
In 1974, the Royal Blind Society established within it's manufacturing division a facility to build high quality tandems for blind and partially sighted members of its sports club. By the end of 1978, the manufacturing division expanded and a new series of high quality, hand built racing cycles were developed to suit the individuals needs of the cycling enthusiast. A demand in the bicycle hire industry prompted the development of a strong universal bicycle and the new 24" Mixti family cycle was born. By 1979 the Royal Blind Society was manufacturing both family bicycles and tandems for the bicycle hire industry in N.S.W., Victoria and the A.C.T. Both cycles received an enthusiastic reception, so much so, that in 1982 they were the first bicycle manufacturer to win an Australian Design Award. This Mitchell bicycle was donated by the Deacon family whose son Paul worked at Mitchell Manufacturing during this time.1 x mens bicycle frame and tyres painted white with gold letteringMitchell Plate attached to cross bar: This Mitchell Bike was assembled by Paul Deacon (1965) Enfield Blind Society NSWroyal blind society of new south wales, mitchell manufacturing -
Moorabbin Air Museum
Machine - ABC Firefly 'Ground Power Unit' Engine
Historical Details: . Description: Walter Adams owned and ran W L Adams Ltd at Redbridge, Southampton. He was a cycle and motor engineer & designed & built engines for small boats & hydroplanes in a small workshop. Roland Charteris appears to have been a financier, in 1910, Granville E. Br. Level of Importance: -
Flagstaff Hill Maritime Museum and Village
Container - Jug
White, decorated ceramic jug with gold decoration around lip and base. Handle has decorative relief. Crack in pouring lip.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Glenelg Shire Council Cultural Collection
Weapon - Harpoon, n.d
City of Portland Collection 19/4/2000|Kurtze MuseumIron utensil featuring shaft with V shaped section on one end and solid cone-shaped section on the other end. Painted with glossy black paint.whaling, weapon, harpoon -
Queenscliffe Maritime Museum
Vehicle - Dinghy sailing, carvel planked Swan Class
These craft were in use since the early 1900s in Swan BayCarvel planked swan class sailing dinghy designed for use in shallow Swan Bay.sailing, dinghy, carvel planked, swan bay -
Whitehorse Historical Society Inc.
Tool - Centre bits
Part of collection of Carpenters' tools used on sailing ships from England to Australia7 metal centre bits of various sizes for drilling in wood.NA987.1 Arthur NA987.2 Marples and Sons 11/16 NA987.3 Larnshaw BRC Sheffield NA987.4 JOHN WILSON Sheffield NA987.5 1 1/4 NA987.6 W.Marples + Sons NA987.7 R.Sorby Casteeltrades, carpentry -
Whitehorse Historical Society Inc.
Tool - File
Part of collection of carpenter's tools used on sailing ships from England to AustraliaThin round 'rat-tail' file with flat faceted endtrades, carpentry -
Port Fairy Historical Society Museum and Archives
Instrument - Accordion, early 1900s
Believed to have been played in the saloon of the S.S.Casino by a crew memberBlack and tan button accordion played on the S.S.CasinoInitials "W" and "D" Scratched onto handlelocal history, musical instruments, keyboard -
Bendigo Historical Society Inc.
Tool - SCALEBUOY
Mercury filled glass bulb, internal part of a Scalebuoy invented by Abbott Bros Bendigo, used to prevent build up of scale in water tanks, etc.A.C.Scalebuoy. Bendigo Electronic Coy Patd.sciences, instruments - general, scalebuoy -
Flagstaff Hill Maritime Museum and Village
Container - Ink bottle, MABIE TODD & Co. (Aust.) Pty. Ltd, Second half of 19th Century or first half of the 20th Century
A Brief History Of Mabie Todd Ltd The company originated in America from the beginnings during the 1860s when a Mr. Todd and a Mr. Mabie began making pencil cases and pen holders in New York. Later they were joined by the Bard Brothers who made Gold nibs and by 1873 the company of Mabie Todd and Bard were established in New York. By 1878 the first patent was filed for the design and manufacture of a fountain pen, achieved under the design leadership of one William Washington Stewart. The first Swan fountain pen followed just 6 years later in 1884 with an over-under feed with ink delivery assisted by a twisted silver wire. This same year an office had been established in the UK with a showroom in Cheapside, London. The UK was being supplied with a steadily increasing supply of pens from New York and by 1905 new, larger showrooms were established in High Holborn. By this time the Swan pen had become synonymous with fountain pens at large. In 1906 the name of Bard was dropped in the US and the UK company subsequently adopted the title Mabie Todd & Co. New York. In 1907 British production began, using imported nibs from New York and whilst the company in the UK flourished, the business in the US started to diminish under stiff competition from new manufacturers.. By 1915 manufacturing was doing well in England from a factory in Weston Street, London and the New York company agreed to sell the rights to all European and Colonial business to Mabie Todd & Company Ltd of England. From then onwards, the development of the range mostly followed, rather than led the interests of the markets they were supplying. Even during the First World War the business continued to flourish. with factories in both London and Liverpool. At the end of 1919 a new expansion plan saw the establishment of a new Headquarters in Oxford Street, London. Throughout this period, some components were continuing to be imported from America, but gradually these diminished and during the 20s and 30s manufacturing facilities were expanded and by the end of the 1930s Mabie Todd were in full production, manufacturing pens in its London factory, gold nibs in Birmingham and ink in Liverpool. Another new headquarters grew out of this period of abundance and market domination. when in 1936 they moved into Sunderland House in Mayfair, London, a highly prized mansion building. Disaster struck early in the Second World War. Its prestigious Sunderland House headquarters was destroyed during the blitz, followed by destruction of its main factory in Harlesden, North London. Some machinery was saved and able to be used at another factory premises in the City, but like many other 'non essential' manufacturing, the main production was centred on wartime components such as rocket fuses and ammunition. After The War, in 1945 they moved out of their City premises to Park Royal and eventually in 1946 proper fountain pen production was resumed. In 1948 the company decided to go public. But at the time they had no plans to enter into the market for the now growing interest in ballpoint pens, the result was the beginning of their slide into obscurity and subsequent demise. They became Biro Swan in 1952 following a large share purchase by Biro Pens. Even though at this time they had just launched their new high profile Calligraph range to join the competition for the new market associated with a craze for italic writing, fountain pen manufacture under the new company was to suffer a lack of real support. The restyled ranges of 1956 failed to ignite market interest and with diminishing quality, the end of the Mabie Todd story was inevitable. After 80 years of Swan pens, the book was closed.This bottle of ink would have been supplied to schools. After a child was deemed old enough to progress from just using slate and board, he/she would have been supplied with a pen shaft made of wood and with a very basic metal nib. The ink bottle would be used to fill up the individual inkwells. This operation would have been conducted by the teacher him/herself, or by an older pupil under the close eye of the teacher.Ink bottle clear glass with 'Swan Ink' paper label. Has rusted screw on top & black ink inside.Label has 'Mabel Todd' manufacturer's logo at top,; 'Swan Ink' name clearly shown; 'Made in England' printed clearly; and 'Mable Todd & Co Ltd, London & Liverpool' printed at base of label.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ink, bottle, mabie todd ltd -
Trafalgar Holden Museum
Weapon - Artillery round, Ca 1930
Display round to show troops how to load gun and be able to handle safelydisplay ammunition to suit GMH built Polson gunBrass cartridge casing with red painted bulletNOT REAL DISPLAY ONLY TRAFALGAR HOLDEN MUSEUMmilitary, polson, cartridge -
Queenscliffe Maritime Museum
Instrument - Telescope
Spencer and Browning was established by William Spencer and Samuel Browning in 1778, before they entered into partnership with Ebenezer Rust in 1784. After the death of Ebenezer Rust's son, the successor business was known as Spencer, Browning & Co. The firm of Spencer, Browning & Rust made a variety of navigational instruments, including octants and sextants.This telescope was manufactured by a London firm established in 1778. The telescope is believed to be from around 1863.Two piece brass day or night telescopeSpencer, Browning and Co. London Day or Night telescope, navigational instruments -
National Wool Museum
Machine - Loom, George Hattersley and Sons Ltd, 1920 - 1935
Weaving is the interlacing of two yarns, one at right angles to the other. Yarns that run the length of the fabric are called the warp. Yarns that run across the fabric are called the weft. Most woven fabrics are produced on a loom. The warp yarns are raised to form an opening - the shed. The weft carrier, usually the shuttle, shoots through the shed. Then the warp yarns change position up and down. Finally, the weft is pushed tight against the previous yarns, gradually building up the fabric. Hattersley dobby loom. In working order, black painted cast iron.weaving, george hattersley and sons ltd, weaving machinery, loom, wool processing, textile industry -
Federation University Historical Collection
Instrument, Timber Tripod
Used at the Ballarat School of MinesTimber tripod with 4.2 cm diameter male thread on top, with wooden legs. Top and hinges painted bright green.tripod, ballarat school of mines, surveying -
Kilmore Historical Society
Tool - Shoe last, Cast iron shoe last
Cast iron last with rectangular hole in top towards the back of last for a removable leg The top slopes down towards toe19 stamped in toe. 2 cast holes on sole -
Bendigo Historical Society Inc.
Vehicle - CARBIDE VEHICLE LAMP
Carbide Vehicle Lamp. Silvered Metal. Left hand has a small Red lens, Right hand side has a small Green lens. Front lens is missing. 'Made in England is imprinted on the base.. Has a Carry Handle and a Flexible mounting bracket at the rear. Approx. 120mm wide by 150mm high -
Australian Gliding Museum
Machine - Winch - for auto tow launching cable laying and retrieval
The auto tow launching mechanism was designed by Ray Jamieson of Cobram in the north of Victoria. The prototype was built the for the Corowa Gliding Club where it was used for some years. After Ray’s brother, Bert Jamieson, had witnessed the machine in use at Corowa, at Bert’s request, Ray built second one (the Museum’s exhibit) for use at Bacchus Marsh airfield. Bert lived in Melbourne at the time and was a member of the Victorian Motorless Flight Group (VMFG) which used Bacchus Marsh airfield. This occurred in the 1970s. The method of operation was to have the auto tow mechanism mounted in the back of a utility motor vehicle. The launching cable was attached to the glider. With the Volkswagen engine of the mechanism running, the tow vehicle would then drive along the runway to commence the launch. The mechanism would automatically apply brake pressure to the cable drum as the vehicle proceeded freely letting out the cable and then smoothly towing the glider into the air. When the launching cable reached a certain angle, the pilot would release the cable from the glider at which point the winching mechanism would automatically retrieve the cable in preparation for the next launch. This allowed quicker restarts and the flexibility of easily changing runways to suit the wind conditions. It made gliding a simple and cost-effective operation. Ray Jamieson and his son often used the prototype which they named “George” at Corowa in this way. With the exception of several demonstration launches, the Museum’s example of this type of device was not used by the VMFG at Bacchus Marsh due to rulings by the Department of Civil Aviation encouraging the use of aero tow launching at their site. As far as is known this is the only device of its type in the world and is indicative of the ingenuity found amongst the Australian gliding fraternity.Single drum and motorized drive mechanism mounted on a mobile steel frame.australian gliding, glider, sailplane, auto towing, launching, jamieson, corowa gliding club, victorian motorless flight group, vmfg -
Moorabbin Air Museum
Container (Item) - WW2 Aircraft Urinary Plastic Bottle
-
Numurkah & District Historical Society
Container - Bottle
Smelling salts bottle with metal screw-on lid. Geometric pattern on six sides -
Flagstaff Hill Maritime Museum and Village
Tool - Screw Driver, F G Pearson & Co, 1902
The subject item was made by G. Pearson and Co Ltd. of the Hope Works, Sheffield England. This company was established in 1854. By 1914 the company was manufacturing many differing types of edge tools, joiners' tools, forks and garden tools. Their specialities were hay, manure and coke forks, punches, armourers' tools etc. In 1938 the Company was styled F. G. Pearson and Co (Sheffield) Ltd and they were still making plane and other sharp edged blades as late as 1957, but by the 1970s they had gone out of business.A significant company based in Sheffield England and making tools of all types and exporting same to various countries around the world. This particular item is a vintage joiners screwdriver possibly used by a local Warrnambool carpenter (J Rob).Screw driver wooden handle shaped blade & brass metal ferrule1902 Sheffield marked on blade, F Rob owner Marked on handlewarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, joiners tools, screwdriver, carpenters tools, f g pearson sheffield -
Queenscliffe Maritime Museum
Tool - Set of French Curves
Set of timber and plastic French curves in timber boxStanley London -
Whitehorse Historical Society Inc.
Tool - Soldering Iron
Belonged to donor's father and used by him. Later used by donor until the advent of electric soldering irons.Long wooden handle with metal bar attached to shaped Copper piece.trades, plumbing, tinsmithing -
Whitehorse Historical Society Inc.
Container - Tobacco Tin
A small blue tin with "Perfection" printed horizontally across the tin in blue on a darker blue background.Perfection, High Grade Long Cut Tobacco 2ozs nett England on lid; Dark on edge of lid. Perfection Tobacco, The finest the world can produce, manufactured by Dudgeon & Arnell Propty Ltd Melbourne Australia -
Flagstaff Hill Maritime Museum and Village
Tool - Circle/Convex Faced Plane, Prior to 1950
Before setting the barrel head, the cooper smooths the inside surface of some barrels with a stoup, compass or circle plane and an inside shave (or in shave plane). A stoup or compass plane has a convex sole in both directions to work within the doubly curved staves of a barrel. The cooper smooths the outside of the barrel with a downright, another large-handled shave, and a similar scraping tool to finish off called a buzz. The final step is to fit the head and drive on wooden or steel hoops. Making the barrel has taken a number of planes similar but different from those of other trades, each perfectly adapted to a cooper’s work shaping curved surfaces. And if he has done his work well, the barrel will hold the exact amount of liquid and not leak.A tool unique to the cooper used to smooth out the inside of a barrel that has been in use since the making of wooden barrels and buckets for hundreds of years without much change to the design or how the tool is used.Compass or Circle face PlaneNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Mont De Lancey
Container - Glass bottle
Glass bottle full of ink with a cork stopper. It has a beige label with a blue rectangle, a red diagonal stripe and blue and white lettering.On the blue rectangle: "ANGUS & Co PTY LTD OFFICE BLUE BLACK WRITING FLUID". On the red diagonal stripe: "Special". Across the bottom of the label: "CONTENTS 32 Ozs. This ink writes a beautiful blue color & changes to a deep and permanent black. It is non-corrosive & flows freely from the pen. A perfect ink for office use. MANUFACTURED BY ANGUS & CO. PTY. LTD. AUST. CONTENTS 32 Ozsbottles, glassware -
Flagstaff Hill Maritime Museum and Village
Tool - Pocket Knife, ca 1855
When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Pocket knife section, metal, Ornate side. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, pocket knife