Dr Geoffrey Kaye was a clinical anaesthetist at a time when very few full time anaesthetists existed. He was passionate about the training of future anaesthetists and would often section anaesthetic equipment to reveal its inner workings and show those to students. This Probyn Williams Inhaler is one apparatus which has been sectioned and the various elements of the inhaler have been painted to highlight the differences in function.Oval shaped metal inhaler with attached metal facemask. The inhaler has been sectioned to reveal its inner workings and the ether chamber has been painted black while the air-channel has been painted red. The manufacturer's logo, stamped into the inhaler, has been sectioned as well, leaving only half the information available.Engraved on dome side of inhaler: PROBYN WILLIAMS / G.K. sect. 1939 •Stamped into dome side of inhaler MAYER & / LONanaesthesia, anaesthetist, inhaler, ether, medical history

Very small black box camera. One of the first. It is nearly a pin hole camera.photography, cameras

Standard issue sewing kit as used by National Serviceman, Lance Corporal B A Rosenthal, 3rd Battalion, The Royal Australian Regiment, Vietnam 1967-8, Mentioned in Despatches for his command and control during a section ambush in which he was wounded. Unit Citation for Gallantry for his involvement in the Battle of Fire Support Bases Coral and Balmoral.Green material sewing kit with 3 pockets containing vaarious threads, needles and pins for sewing.A Rosenthal 002 4718450kit sewing, house wife, rosenthal

Hand-made manometer is mounted on a flat, rectangular chrome platform. It comprises three valves labelled A, B and C. Valve C is connected to a glass measuring cylinder via a curved metal pipe. Item also includes a small spanner and brown plastic mock leather case with metal clasp, hinges and studs.Engraved into the floor of the device are the instructions on what valves to open and shut for 'infusion, fill and read'. Engraved on spanner: Geoffrey Kaye Engraved on clasp of case: Kaye BJ.2749anaesthesia, dr geoffrey kaye, manometer, venous pressure manometer, measurement, spanner, chrome, invention, manufacture

Item issued to "Henry Smyth" 3792681. Refer Cat No. 9561 for his service history.Blanket cover, green colour nylon, has press studs to hold blanket in.On label - "Conlons Australia - 1966 ^ 7210-66-011-5816".henry campbell smyth, equipment, blanket, cover

Item issued to Frank Levy (Major) served pre WW1 and AIF in the Light Horse and Artillery. Refer Cat No 1924.2 for his service history.Horse Nose Bag made from heavy duty canvas, round shape, has 8 holes via metal studs. The bag has one strap combining a canvas section sewn to a heavy leather belt adjustable on the one end."F LEVY"transport - horse, military history, trades - leatherworking

This stamp was made for and used by Cramond and Dickson, a large clothing store on the corner of Liebig and Timor Streets, Warrnambool. They traded from 185 – 1974. John Glass Cramond and James Dickson migrated from Scotland to Melbourne where they opened a Cramond and Dickson store in St Kilda. They were inspired by the growth in Warrnambool after a visit and opened a second store there in 1855. The Cramond and Dickson store, grocers – drapery – ironmongery - chemist, was located on the corner of Liebig and Timor Streets, Warrnambool (now the site of a Mexican restaurant). Both Cramond and Dickson were involved in the business and social aspects of Warrnambool’s community. Cramond and Dickson closed in 1974. An advertisement placed by Cramond and Dickson in The Camperdown Chronicle, Saturday 6th April 1895, states them “showing the latest novelties for the coming winter season” … “import directly from English and Continental manufacturers” … “representatives in London … always in touch with the Newest Continental Fashions” ... “having been established for so many years we know the requirements of the Western District”… “allow 5 percent discount on goods paid for at the time of purchase”.The rubber stamp is significant for its association with Cramond and Dickson, a large retail store established in Warrnambool and operating from 1855 to 1974. Both partners were prominent figures in the community.Rubber stamp, octagonal-sided, with wooden handle. The stamp was owned and used by Warrnambool's department store, Cramond & Dickson."Warrnambool" "Outfitters and Drapers" "Cramond and Dickson"flagstaff hill maritime museum and village, flagstaff hill, maritime village, maritime museum, shipwreck coast, great ocean road, warrnambool, cramond and dickson, warrnambool business, department store, commerce, timor street, liebig street, sales, retail equipment, office equipment, stamp, rubber stamp, business stamp

The computer cards and printout were completed by John Barker while he was a student at Ballarat College of Advanced Education, a predecessor institution of Federation University Australia. The punch cards were used in the RMIT computer centre. John Barker was the son of E.J. and Winsome Barker.A number of punch cards and the related print out .punch cards, computer, computer print out., john barker, fortran

Item in the collection of William John Leslie Bennetts. Refer to Catalogue No. 9886P for his service history.Silver coloured plated metal cylindrical shaped whistle. Solid construction. Plaited brown leather cord attached.Stamped on whistle: 'THE CITY WHISTLE, PATENT'. Stamped on top of whistle: 'PATENT 5727.08'.william bennetts, whistle, ww1

Leather pistol holsterUS "BOYT"holster, weapons, u.s. miltary equipment

Part of the "Kevin John Herdman", No 397661, collection. See Cat. No. 5942P for details of his service.Brown canvas Army issue kit bag also known as a 'sausage bag' due to it's shape. Eight metal eyelets around opening. Cotton rope for closure threaded through the eyelets. Brown canvas flap sewn onto inside of the opening.Handwritten in black on base; 'HERDMAN' equipment, kit bag, sausage bag, army, kevin john herdman

The Spurs were issued to Frank Levy. Pre WW1 he had served in the 17th Light Horse from 1910 until he enlisted in the AIF with the rank of Lieut age 24 years 3 months with 14th reinforcements 8th L.Horse on 16.12.1915, embark for Egypt 27.1.1916, transfer to 12th FAB (Artillery) 6.4.1916, embark for France 2.6.1916, promoted Capt 21.1.1917, detached to Australian Artillery Reserve Brigade England 6.2.1918, rejoins unit 27.5.1918, transfer to 45th Battery to Command 8.9.1918, promoted Major 22.10.1918, hospital 19.6.1919 with Scabies, discharged from the AIF 23.12.1919..1) Riding spurs, metal 'U' shape with 2 leather straps attached, one with adjustable strap & buckle. .2) Same as .1)military history, transport - horse, metalcraft brassware, metal craft - cast iron

A small hand-operated projector for 22x17 (picture size) film strip with perforations along both sides, 28mm apature with 240-V light source. Housed in a black box. SVA MODEL Q "PICTURE PROJECTOR"projector, hand-held projector, film strips, light source, model q, aparture

Part of horse harness used during World War 1 Leather and metal harness piece consisting of a leather piece with metal chain on one end and metal bracket on the other. ww1, first world war, ww one, world war 1, world war one, horse harness ww1, quick release harness ww1

The attribution of this item as a thyroid elevator is currently uncertain.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Surgical tool. Consists of a central shaft, the shape of which bows out in the middle into an elongated oval, with prongs in the shape of double hooks at either end. Inscription on one end of the tool reads 'MAYER & MELTZER', and inscription at the other end reads 'LONDON'.'MAYER & MELTZER' 'LONDON'surgery

Metal, electric reads punche tapes, with handleTeletype Corp., Chicago, ILLsignals

Five small army green pistol magazine holders, these are webbing self locking plastic clips to attach them to harness webbing. The five items are identical and are new and have not been used.passchendaele barracks trust, pouch, magazine, pistol

Alan Mason collection, refer 3979.2.1).2) Shoulder straps, webbing, khaki colour, one end is large width wise and then narrows down, large end has a brass buckle, other ends have brass keepers.webbing, shoulder straps

This underwater SLR camera housing was made to hold a standard SLR camera and keep it watertight for underwater photography up to 300 feet in depth. Ikelite continues to be a leading manufacturer in the underwater photographic industry. The business began in the early 1960s when diver Ike Brigham invented a waterproof seal for his underwater flashlights. The name IKELITE was trademarked in 1962. In the late 1960s, Ike developed camera housing kits that were clear and enabled access to change a roll of film. He was the first to use lid-snap closures on an underwater housing. The history of underwater photography began with the first protective camera box for underwater photography was made in 1856. In 1914 the first underwater video footage was taken. Colour underwater photography was first shot in 1926. In 1950 the first commercially available underwater camera housing, the "Tarzan" was designed by Henry Broussard, an underwater photographer, for his own camera. It was produced by the French company Beauchat. In 1957 the revolutionary underwater camera was invented by Jaques-Yves Cousteau and Jean de Wouters. The new amphibious "Calypso" changed the nature of underwater photography.This underwater camera housing is significant for its purpose of underwater photography. Camera housings such as this were used to record the position and layout of shipwrecks along coast of the Great Ocean Road. Flagstaff Hill Maritime Museum and Village has underwater footage of dives that show the now protected shipwrecks.Underwater camera housing, Ikelite brand SLR camera housing, for up to 300 feet depth. nscriptions embossed on the back. Made in Indianapolis, USA. Embossed "Ikelite SLR camera housing. Made in Indianapolis. Ind. USA. 300Ft"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, underwater camera housing, ikelite, indianapolis, underwater photography, slr camera housing, ike brigham, camera housing kit

Standard piece of equipment installed in a tank. A circular metal pea green interior light for a M113 tank. It has a Perspex face with black connection cord. Screw adjusted.30B/1092352/24 Volt tank, m113, interior light, haydn neal, vietnam

Khaki webbing harness for a water bottle. There is an over the shoulder carry strap fitted with brass length adjustments.passchendaele barracks trust, harness, water bottle, equipment

"D" handle, used to close a kit bag. The eyelets on the bag are threaded along the straight edge. It was then able to be locked using a padlock through the small ring area.Brass - "D" handle for kit bag.passchendaele barracks trust, brass handle

Used on horse tackle during 19th and 20th centuries and manufactured by Holden and Frost.Sold and manufactured by Holden and Frost for military ,agricultural and civilian use.Circa 1910 Two nickel plated rings on outside held together with twisted chain.Nilequine, military, agriculture, civilian, ca1910, horse bit

These handles were for fitting to Kit bags otherwise known as sausage bags.Handle, “U” shape, brass, one side is hinged to swing to other side which has a hole so a lock can be attached.handles brass, kit bags

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

Military case, aluminium, that seals to avoid moisture damage to contents in the tropicsJ Coughlan J Coughlancase, metal