Collection of 6 corroded nails with a rose head and a square shaft narrowing to a blunt tip.archaeology, historic building, former royal mint

The Nunawading Council produced commemorative First Day Covers showing First Day of issue stamp during the years 1981-1992Three First Day Covers, each bearing 33 cent stamp, reproduction of painting of 'Australia Day 1986: An Aboriginal Perspective'. Postmarked 'First Day of Issue 24 Jan 1986 Nunawading Vic 3131' At left of envelope, logo and depiction of shearer shearing sheep; also 'Australia Day Family Festival' and '26th January 1986, Civic Centre, Nunawading'. Envelopes numbered 119, 120, 268Municipal Offices Nunawading Vic 3131philately, date stamps, civic mementoes, souvenirs

This stencil was used as a wool classification stamp for the transportation of wool bales. Classification stamps like these had to be approved by a Wool Classier and described the quality of wool inside the bale. SUPER is used to describe superfine wool.Wool bale export stencil - SUPERSUPERwool - transportation, wool sales, wool class, wool classers

Patented RapidWash plunger design with attached wringer. These machines significantly reduced the effort required to launder heavy items compared with hand-washing in a tub.A metal tub 44 centimetres diameter and 50 high supported by three legs that are 24 centimetres long. A metal bar extends 27 centimetres above the tub and has a 66 centimetre long metal bar attached by a hinge, above the middle of the tub this bar has a hinged attachment with a 24 centimetre long metal bar on ii which has a 38 centimetre wide and 24 centimetre high metal conical plunger with a fluted apron on the end of it. The plunger is forced up and down the tub by the lever action of the 66 centimetre bar. A water outlet is in the bottom of the tub. There is a piece of wood six and a half centimetres by two centimetres by 45 centimetres attached to the tub which would have supported a ringer.THE LEHMANN COMPRESSED AIR AND VACUME WASHING MACHINE PAT No 30614/30lehmann, washiing machine, laundry equipmenr

Sturdy brown paper carry bag bearing the crest of the City of Port Melbournelocal government - city of port melbourne

Item is part of a collection of sewing tools donated by Betty McPhee.Scalloped fan shaped card containing four cards of darning thread. Front of card has a sketch of a vase of flowers.Xmas Greeting from vi.handcrafts, equipment

Scalloped edged white maid's apron, bib attached. Checked fine lawn. Cotton backing on edge.

Demonstrates aspects of the Melbourne Tramways fare system as a comparison to their use at Ballarat.Fare tokens - 1 1/2d - 22mm diameter - dark brown celluloid - with words "Melbourne & Metropolitan" on circumference and "Tramways Board" in centre of token. On reverse in large font "1 1/2" and a small font "D" at to the right - indicating token had a value of one and a half pence. Both sides have a edge lining border about 1mm from the outer edge. See image. Details of use, date of manufacture and manufacturer not known at time of cataloguing. trams, tramways, tickets, tokens, mmtb, melbourne

Trolley Wheel - cast brass, fitted with a cylindrical bush in the centre. Used on Melbourne trams until the late 1950's when changed for trolley skids to bring the power from the overhead into the tram. Fitted to the end of a trolley pole with another cast item known as a hasp. Has been used. Used by Ballarat and Bendigo trams.trams, tramways, tramcar component, overhead, trolley wheels, trolley poles

Bookmarks from the churchchurches

Made by Karl Kirsch at Camp 3.5 light coloured square/rectangle buttons; 2 darker coloured - 1 square 1 slight rectangle buttons; 2 holes in centre of each button; made of wood.Tatura Camp 3 1943-1946 Babette Kirsch buttons - wood, camp 3, sewing, kirsch

A pair of iron 'u' shaped curved horseshoes with two grooves on each side which have four holes each to fasten to the bottom of the horse's hoof. There is a smooth curved indentation at the top of each one. This is the horseshoe on the left in the picture.No.7horses, horse accessories, horseshoes

Made by Karl Kirsch at Camp 3Square wooden buckle with cut out centre prong. Dark wood. Lacqueredbuckle, wooden, kirsch k, camp 3, tatura, ww2 camp 3, costume, accessory, clothes

Blue castor oil bottle with thin neck screw top mouth. Moulded into the glass are the words ''GROVES McVITTY & Co. PTY LTD. CASTOR OIL''. A moulded stamp on the base of the bottle has the letters and numbers ''D661 GM.'' The base is 4 cm in diameter and the bottle is 20 cm high.''Groves McVitty & Co. Pty Ltd. Castor Oil'' ''D661 GM.''food technology, bottling, castor oil bottle

USED IN CLUNES POST OFFICE .1 BLACK MOLDED HARD RUBBER STAND TO HOUSE THE FOLLOWING .2 ROUND BLACK RUBBER WITH FELT INNER FOR WATER ABSORPTION .3 ROUND BLACK RUBBER WITH FELT INNER FOR STAMP PAD INKNILstamp pads, clunes post office

William Morley Johnson established a stock and general auctioneers business in Kyneton in 1886 before opening a furniture store in Bendigo in 1897. The initial business operated from Pall Mall opposite the Post Office and then moved to 23 Mitchell Street in 1898. In 1906 the business moved to Sydney. It became a public company in 1952 and ceased business in 1964.An oval metal tray with Electro Plated Nickel Silver. It's 40 centimetres long and 30 centimetres wide. Around the edge of the tray is a two centimetre curved section rising one centimetre and a flat one centimetre wide rim. on the tray there are decorative inscriptions and the words- Morley Johnsons. EVERYTHING FOR THE HOME MITCHEL STREET BENDIGOmorley johnson's, advertising

Coin dispenser or change holder, provided for use on Z class trams - holds 6 types of coins, spring mounted equipment. Has a top entry point and a spring mounted lever that dispensed one coin at a time. Has two lugs on rear to enable it to be clipped to the conductors desk. See Reg Item 4543 for the photographs of an MTT Adelaide set up and Reg Item 4619 for the ticket clip. Two copies held. On the rear of the two items are numbers 1602 and 1614 scratched in.trams, tramways, tickets, conductors, ticket machines, coins

A dead eye is a part of a vessel’s rig On board sailing ships, dead eyes were used in three different areas. Traditionally dead eyes are made of wood but they have different forms according to where they were used in the vessel rigging. The most common type of dead-eye is flat, with three holes and was used to tension the shrouds, the heavy lines which steadied the masts on each side. Each shroud had a dead eye at the lower end, which corresponded to a similar dead eye attached to the side of the ship. The two were connected with a rope called a lanyard, which was used to tighten the assembly. The stays, heavy lines running forward from the masts, were also tensioned with dead eyes. These are much larger and rectangular, with four or six holes. The third type of dead-eye was a two-holed version attached to an eye at the end of the parallel, which tied a yard to the mast. The loose ends of the parallel rope passed through the dead eye and then down to the deck, making it possible to tighten or slacken the parallel from the deck so that the yard could be more easily manoeuvred. It was especially important for the mizzen yard, which had to be shifted from one side of the mast to the other when tacking the ship.An item used on sailing ships rigging this item of ships equipment and its use has been used from the beginning of the invention of sailing ships going back to ancient times. Its use on sailing vessels had not changed in design or use until they went out of fashion and steamships took their place.Circular wooden ships rigging dead eye with three holes Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel rigging, dead eye, sailing equipment

.1 - Badge - Manufactured - brass? with gold plate finish on the rear and sides with a green and gold glazed paint finish with the Metropolitan Transit Authority logo and the words "Traffic Officer" and "Metropolitan Transit" and two braised lugs and one clip for use in a uniform. Has number "4" stamped into the top of the badge. .2 - as above - No. 108 contained with in a cellophane packaging with two brass clips inside. .3 - as above No. 121 .4 - same style as above, but a larger version - No. 121 has a pocket clip on the rear - with the name "Lega Melbourne" stamped in.trams, tramways, the met, badges, officers, mta

A dorade is a type of ventilator that permits the passage of air in and out of the cabin or engine room of a boat while keeping rain, spray, and sea wash out. The basic form is a low, rectangular box fixed to the deck or cabin top, fitted with interleaving vertical baffles. The baffles alternate to be free at the floor of the box, or free at the ceiling, forming a series of chambers. A horn-shaped ventilation cowl is usually fitted facing forward to a large hole at the top of the chamber at one end of the box with another large hole opening down into the boat from the chamber at the other end. Limber holes perforate the wall of the box at the floor of each chamber. Dorade boxes operate on the principle that air can pass relatively freely through the chambers, yet rain or sea wash will be trapped in successive chambers and drain out the small holes in the sides of the box. The first appearance of Dorade boxes was on the Olin Stephens-designed Dorade, a yacht built in 1929 for ocean racing. As originally built, the Dorade's vents led directly below, but this was found to allow water below, and the vents were modified in the early 1930s.An early piece of marine equipment from the 1930s that still is in use today on smaller vessels to improve below deck ventilation. Dorade Ventilator Cowl brass casting with wide open mouth twisted to side with swivel base. Box and baffles missingNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ventilator, dorade, maritime equipment, ships fittings, ventilator box

This object features a key with a labelled tag attached to it. It was once the key to the well-known Nepean Hotel. Also known locally as 'The Castle', likely due to its grand size and turret-like tower, the Nepean Hotel was officially established in 1872 by James Sandle Ford (https://poi-australia.com.au/points-of-interest/australia/victoria/portsea/approximate-site-ford-family-nepean-hotel-c-1870-pt-nepean-rd-near-fitzjohns-crt-portsea-mornington-peninsula-vic/). Born in 1811, Ford was only nineteen years old when he was sentenced to seven years transportation for 'Machine Breaking' in 1830. (https://nepeanhistoricalsociety.asn.au/james-sandle-ford/). He arrived in Van Diemen's Land (Tasmania) in 1831 and served five years of his sentence, before being pardoned in 1836. Ford met and married Irish immigrant Hannah Sullivan in 1841 in Sydney. The following year, the couple settled in Point Nepean. Ford is often accredited with the naming of the town of Portsea - after Portsea in Hampshire, UK - and spent a lifetime establishing himself throughout the area. This included: lime burning, dairying, horse judging and breeding, and the cultivation of land and livestock. Ford died in 1890, however his hotel continued to operate for many decades, run by his descendants - including Julia Cain during the first half of the twentieth century (https://trove.nla.gov.au/newspaper/article/65817831) (https://trove.nla.gov.au/newspaper/article/3734533). The hotel was demolished in 1971. This object is significant as it is important in relation to the development and prosperity of the area of Point Nepean. A door key with a rusted surface. One end of the key features a single set of teeth with three notches. Attached to the other end is a rounded handle with a hole through the middle. Looped through the hole is a piece of thin, rusted wire. The wire is looped through both the key and a hole in a white square-shaped tag. Printed on the tag are the words: 'CAIN'S HOTEL PORTSEA'. CAIN'S HOTEL, PORTSEAnepean hotel, cain family, james ford, james sandle ford, portsea hotel

The Boyd family recall how Robin Boyd loved gadgets for their beautiful industrial design and their functionality.Juice-O-Mat. Metal handle on right-hand side, metal squeezer on top. Cream coloured body to hold cup. When the handle pulled back the fruit can be inserted.On base: SINGLE-ACTION Juice-O-MAT. US CAT NO 462-C. Rival MFG. CO Kansas City MO. U.S.A.gadget, walsh st appliances, robin boyd, ohm2022, ohm2022_11

‘The Art of the Japanese Package’ was an exhibition that toured to 10 Australian and 11 New Zealand public galleries in 1979 and 1980. The touring exhibition comprised 221 objects of traditional Japanese packaging which extended from ceramics, wood and paper to woven fibre containers. At the conclusion of the tour, The Japan Foundation and the Crafts Board of the Australia Council donated the vast majority of the exhibition to the Ararat Gallery for its permanent collection. Combining the natural qualities of bamboo, paper and straw with delicate craftsmanship, these unique objects express Japanese aesthetics as applied through fibre crafts. In Japan, the qualities and traits of natural materials are exploited rather than hidden. The texture of straw, the septa of bamboo are not concealed but lovingly incorporated into the whole. In 1979 Hideyuki Oka, curator of ‘The Art of the Japanese Package’ wrote: “In no way self-conscious or assertive, these wrappings have an artless and obedient air that greatly moves the modern viewer. They are whispered evidence of the Japanese ability to create beauty from the simplest products of nature. They also teach us that wisdom and feeling are especially important in packaging because these qualities, or the lack of them, are almost immediately apparent. What is the use of a package if it shows no feeling?” The descriptions of the featured objects were written by Hideyuki Oka, curator of ‘The Art of the Japanese Package’, 1979.Gift of the Japan-Australia Foundation and the Crafts Board of the Australia Council, 1981japanese art, japanese packaging, tsutsumi, gift giving

Paddy Taffe's walking aid after he lost a leg in the 1940s.cane, walking aids, disability

These plates were manufactured for use by Victorian Railways. The stylised monogram of "VR" and wings was introduced for the locomotive "The Spirit of Progress", which completed its first journey on 23 November 1937. A badge of this design was also worn by the crew of "The Spirit" and the monogram was also emblazoned on the front of the locomotive. An article published in The Argus of 17 November 1937, in reference to the tremendous power of the locomotive said "The great V.R. monogram flanked with wings spread for flight enhances the illusion." The "Spirit of Progress" travelled between Melbourne and Sydney until its last journey on 2 August 1986.These plates are representative of those used on the iconic locomotive the "Spirit of Progress" which travelled from Melbourne to Sydney from 1937 until 2 August 1986 A collection of 4 plates from Victoria Railways. Made of white "Duraline" chinaware. All bear the insignia of Victoria Railways.Logo of VR in between stylised wings"spirit of progress", victorian railways, steam locomotives