Showing 1749 items matching tools-and-equipment
Container (1185) Equipment (1812) Functional object (3922) Instrument (397) Machine (331) Tool (1418) Vehicle (146) Weapon (457)-
Glenelg Shire Council Cultural Collection
Tool - Ships Plans / Moulds, n.d
Wooden pattern for mould for boat fitting. Rectangular, one curved long edge, one straight. Two buttress shaped 'legs' attached to underside, reaching from shaped to straight side, then extending at right angles. Two small cylidners of differing diameters, attached to underside, one a top the other. Painted yellow/orange. -
Royal Australasian College of Surgeons Museum and Archives
Tool - Stapling gun
-
Port Fairy Historical Society Museum and Archives
Tool - Riding Crop
Leather ladies riding crop with leather handle embellished with embossed silver trim. A small silver ring at the base of the handle allows for the attachment of a wrist strap. The whip end is of plaited leather..7AIR Mareks (indiscernible)riding, horse -
Mont De Lancey
Tool - Pig Scraper, F G Pearson & Co, circa 1914
Used in the 19th century. Pigs were often raised for meat for the family. The scraper was used to remove the bristles from the carcass.A curved metal straight bladed pig scraper used to remove the bristles from a pig's carcass. It has a hook on the top edge to remove the nails from the pig's trotters. It has a short wooden handle attached to the metal on the blade with three rivets. There are two slashers near the flail. On the left is the brand 'Pearson 2532' circa 1914 Made by F G Pearson & Co, Sheffield, Right side (est 1859) Right: brand is indistinct. Used in the 19th century.On the left is the brand 'Pearson 2532' circa 1914 Made by F G Pearson & Co, Sheffield, Right side (est 1859) Right: brand is indistinct.farm equipment, farm tools, pigs, farm -
Glenelg Shire Council Cultural Collection
Tool - Saddler's Tool, n.d
Saddler's tool, bone, curved, rectangular, rounded ends, narrowing at one end. An arrow and word starting 'Se' are stamped on one side -
Royal Australasian College of Surgeons Museum and Archives
Tool - LIster's Carbolic Spray, circa 1930's
The College’s spray was one of the first pieces of surgical memorabilia to come into the possession of the College. It had been used in the Listerian wards of the Glasgow Royal Infirmary, and was presented , along with some other artefacts, by James Hogarth Pringle in 1930. Joseph Lister (1827-1912) is known as a father of modern surgery. His methods of preventing infection were controversial in their time, but are today recognized as a major advance in the practice of surgery. Lister’s life and achievements are too well known to be recounted here. The definitive biography was written by his nephew, Sir Rickman Godlee (PRCSE 1911-13), and published in 1917. Douglas Guthrie gives an glimpse of Lister at work: “...He never wore a white gown and frequently did not even remove his coat, but simply rolled back his sleeves and turned up his coat collar to protect his starched collar from the cloud of carbolic spray in which he operated...” From advances in bacteriology, and discoveries by Robert Koch and others, it became increasingly evident that airborne bacteria were not a significant contributor to sepsis in surgical wounds. They also demonstrated that the body had its own defences against invading organisms, which were seriously compromised by the effects of the carbolic spray. Gradually the use of the spray was curtailed, Lister himself finally abandoning it in 1887. Lister performed the first antiseptic operation, the dressing and splintage of a compound fracture of the lower leg, in 1865. At this time he used carbolic solution by application, and dressings soaked in the solution. The spray was developed later, after many different methods, including carbolic and linseed oil putty, had been tried in order to reduce the harmful side-effects of undiluted carbolic acid. The steam spray was developed in 1869, and announced to the medical world in 1871. Lister’s purpose in adopting the spray was to kill airborne bacteria in the vicinity of the operation before they could reach the patient. It came to be used all over the world for many years. However, it had serious disadvantages, which even Lister acknowledged. The principal problem was the inhalation of carbolic vapour by everyone in the vicinity, including the patient and the operator. In addition, if the patient had been anæsthetized using chloroform, the gas lights decomposed the vapour into chlorine gas, making any procedure an ordeal of endurance.The spray consists of a steam boiler heated by a wick, a nozzle for the steam to escape, and a glass jar for the carbolic solution. Fuel for the wick is carried in a tank at the base. Valves regulate the pressure of the steam, and the nozzle is adjustable. The boiler is made of cast iron, the fittings are brass, and the handles are of wood. Empty, the apparatus weighs 8 lbs (3.2 kg). lister, carbolic spray, antiseptic -
Mont De Lancey
Tool - Hoe, Rake Head, Unknown
A small forged steel combined hoe and rake head hand cultivator tool. It has one flattened hoe shaped edge at one end and at the opposite, three rake prongs, and there is an extension on the head for the wooden handle to be attached. It could have been used in small areas such as a garden in the 19th century..agricultural tools, tools, rakes, gardening tools, hand tools, hoes -
Greensborough Historical Society
Tool, Rabbiter's hoe head, 1900s
Small rabbiter's hoeSmall hoe, rusted.tools, hand tools, hoes -
Greensborough Historical Society
Tool - Pickaxe, Pickaxe head
Large pickaxe head. Used for loosening the soil in digging, shaped like a mattock, but having both ends pointed. Iron pickaxe head, large, (no handle)pickaxes, tools -
Trafalgar Holden Museum
Tool - File
Used for sharpening leather tools ca1910Bootmakers sharpening tool used ca1910Three sided metal file with rosewood handlefile, tool -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tool - Chinese Market-Gardener's Watering-Cans
Chinese market-gardener’s watering-cans on a wooden yoke. This item was authenticated by the Bendigo Historical Society, and is said to be quite rare. It consists of two large galvanized watering-cans each with a pouring spout, suspended by chains from a well-used wooden yoke. The cans would each have been filled with water, then carried a distance into the market garden and used to water crops. The cans and yoke alone are very heavy, one can only imagine how heavy they were when filled with water.As profits from the gold-fields petered out the Chinese immigrants, (nearly all single men), were forced to seek other occupations. Many moved into furniture building in the East Melbourne area, whilst others went into market gardening . A significant number of Chinese men, realising the potential of the sandy, fertile soil, with a good supply of water, in the Shire of Moorabbin, leased tracts of land in that area to establish a market garden and grow produce for the increasing population of MelbourneAfter the Dendy Special Survey in1841in Brighton, Victoria, the first sale of Crown Land, taking in the whole Shire of Moorabbin, occurred in 1852. These allotments of land were eagerly bought up - some by speculators - although many were either worked by the owner, or leased out as market gardens and "fruit gardens", (orchards). Chinese market-gardener’s watering-cans suspended by chains on a wooden yoke. This item was authenticated by the Bendigo Historical Society, and is said to be quite rare. It consists of two large galvanized watering-cans each with a pouring spout, suspended by chains from a well-used wooden yokebrighton, gardeners, bentleigh, orchards, vegetables, dendy henry, market gardens, chinese settlers, pioneers moorabbin, water wells, creeks -
Kilmore Historical Society
Tool - Shoe last, Cast iron shoe last
Cast iron last with rectangular hole in top towards the back of last for a removable leg The top slopes down towards toe19 stamped in toe. 2 cast holes on sole -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Saw, Mid to late 20th century
A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone. The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, as the maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture around the mid to late 20th century.Wood hand saw with wooden handle attached to saw by 4 rivets. No blade markings Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, wood saw, carpenders tools, cabinet makers tools, wood cutting -
Trafalgar Holden Museum
Tool - Foot print wrench
steel wrench used in construction and plumbingImported, used and sold by Holden and FrostTwo part steel adjustable wrench pivoting in centreFootprint Made in England Etching of a footprintwrench, steel, adjustable -
National Wool Museum
Tool - Stencil, c.2018
The story of 90 years of wool classing between father & son begins in 1936, when a young boy by the name of Stanley James Hucker walked through the doors of the Gordon Technical School in Geelong. Born in 1921, Stanley was 15 years of age when he began his 3-year course in Wool Classing. 30 years later, Stanley’s second son Denis completed the same 3-year wool classing course. Beginning in 1966, Denis attended the same Gordon Technical School and walked the same halls as his father before him. Stanley finished his course in 1938. He went back to the family farm in Lake Bolac for a brief period before enrolling in the Second World War. At the completion of the war, Stanley returned home and married before gaining a soldier settler allotment, north of Willaura. This enabled Stan to use his wool classing knowledge. He ran between 1,500 and 2,000 sheep for many years, while his wool classer stencil also allowed him to go out and class at various sheds around the area. He held his stencil from 1938 until he retired at the age of 60 in 1981. On retirement, his second son Denis was working in the district, managing a local property while also leasing land himself. Upon his father’s retirement, Denis had the opportunity to lease his father’s farm, an opportunity he could not refuse. Denis had finished his wool classing course at the Gordon Technical School in 1968, graduating dux of his class. He began working with a local contractor and started classing wool in his team. Denis gained a great deal of experience working as part of this team in big sheds of up to 8 stands servicing between 10 & 20,000 sheep. It was not all smooth sailing for Denis however, and he soon learnt an important lesson. Class wool the way you’re taught, don’t listen to the owner standing over your shoulder. At a clip of Corriedales near Casterton, Denis was pushing too many fleeces into the line of fine wool. This resulted in a notice from the Australian Wool Exchange (AWEX) “mixing counts too much, submit three clips for inspection”. Denis was able to submit 3 clips with no further complaints, however, this proved a valuable lesson he would never forget over his long career classing wool. In the early 1980s, when Denis was leasing two properties including his father’s, things were going well until drought struck. February 1983 was the date of the Ash Wednesday bushfires, and saw Melbourne have three days over 40 °C for only the second time on record. This period saw Denis give away farming, turning towards contracting work instead. After the difficult times of the early 1980s, the next two decades were a good time for the sheep industry. 15 micron wool was selling for prices between 4 to 5,000 cents per kilo, double what you’d expect for the same wool in 2022. In 1995 a single bale of wool sold for a million dollars. This was a good time for Denis too. His contracting work saw him employing local shearers and shed staff. His team was involved with the shearing and classing of more than 130,000 sheep. After 20 years of contracting, it was time for Denis to transition into the next phase of his life. He gave up independent contracting, preferring instead to return to being a member of someone else’s team. In 2018, having completed 50 years of wool classing, it was time to call it a day and retire completely. At the annual Gordon Wool School Old Students Association dinner held in 2018, Denis was presented with his 50 years as a registered wool classer stencil awarded by the Australian Wool Exchange (AWEX). This is a rare honour achieved by few. As of February 2020, a total of 430 wool classers had achieved this 50-year milestone. For Denis however, his proudest achievement is achieving 90 years of wool classing with his father. The National Wool Museum is proud to share the collection of objects gained from 90 years in the wool classing industry by Stanley and Denis. This ranges from Stanley’s first stencil and Wool Sample book, started when he first attended the Gordon in 1936. The collection concludes 90 years later with Denis’ 50 years of wool classing Stencil. The collection contains many more objects, all telling the story of these 90 years, and the hard work invested by this dedicated father and son duo. Thin sheet of orange plastic with letters and numbers moulded to produce a consistent pattern for the surface below through the application of ink. This wool classing stencil once belonged to Denis Hucker. The top number is Denis’ Wool Classing Stencil Number. On the next line is the emblem of the Australian Wool Exchange, followed by an image of Australia, and finally the letters AW. The final line reads 50 years, indicating Denis’ experience in the profession of wool classing. This stencil is reserved for wool classers who have held their stencil and been actively classing wool in Australia for more than 50 years. Wool classers sort, classify, and grade wool into various lines so that it can be sold at best market price. They also manage and supervise wool-handling teams. The stencil is used in the final step of preparing a bale of wool for sale. It is branded across the front of a wool bale to indicate the quality of the wool, with the classers number used as a seal of approval. Accompanying the stencil are two sheets of white A4 paper with printing in gold and black ink. The first sheet was presented by the Australian Council of Wool Exporters & Processors to Denis Hucker for achieving 50 years of wool classing. Surrounded by a thin gold boarder, the page is made up of black text with gold headings. In the top right corner, an image of a sheep with an outline of Australia is found. The second piece of paper was presented by the Australian Wool Exchange to Denis Hucker for achieving 50 years of wool classing. Two thirds of the page is made up of a gold stencil which reads “50 years”. Accompanying the stencil is black text. Moulded letters, numbers, emblem, and imagery. “950326 / (emblem AWEX) (Image Australia) AW / 50 Years” A4 Paper. Printed. See Multimedia A4 Paper. Printed See Multimedia wool classing, stencil, 90 years wool classing between father & son -
Flagstaff Hill Maritime Museum and Village
Tool - Marking Gauge, 1875 to mid-20th century
This mortice marking gauge has an adjustable sliding arm. The gauge is used for scribing two lines on a flat surface such as timber for measuring and cutting. It is a hand-powered tool that would have been used by a tradesperson such as a cabinet maker, woodworker or carpenter. The hand tool shows signs of much use. The ‘W. Maples & Sons, Hibernia’s catalogue of 1867 had a very similar tool, called a Mortice Gauge, column 2, page 15. W. MARPLES & SONS- William Marples Snr. had a business on the Sheffield Moor in 1773/74. In 1821 his son William Jnr. At 12 years old began in his father’s joinery business. 1833 the firm was known as a tool manufacturer. In 1838 Marples called his business Hibernian Works and moved to 67-69 Spring Lane, Sheffield. When he moved to Westfield Terrace in 1856, he called his business Hibernia Works (no ‘n’ on the end). The business remained at this address for 116 years. In about 1859 the firm began using the Lyre (Irish harp) mark. In 1860 or so the two brothers, Edwin and William Marples, became partners and the firm became William Marples and Sons. The firm introduced the single shamrock symbol in 1860-61. The boys’ brother Albert joins the firm in 1863. In 1875 the company registered both the name ‘Hibernia’ and the trade mark symbol of a Triple Shamrock and the use of these trademarks continued for many decades, into the 1940 and the firm, with many changes, was still in business in the early 21st century. About Shamrock and Hibernia, both are related to Ireland and W. Marples named his products the Shamrock brand.The marking gauge is an example of a hand powered woodworking tool used over the past few centuries. Its maker was well known for his good quality tools and his business grew because of his reputation.Mortice marking gauge: wooden staff with block and green, adjustable sliding arm within the staff. The end of the staff has a facility for holding the scribe marker. The block has a hole into which a peg or wedge would be inserted to hold the sliding arm in place. Inscription with maker's name and almost indecipherable mark is stamped onto one side of the block. Made by W Marples & Sons, Sheffield.Stamped into block “W. MARPLES & SONS / HIBERNIA WORKS” above Logo of ‘Trefoil’ image [three, three-leafed clovers on the same stem]flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, hand tool, woodwork, marking gauge, measuring tool, mortice gauge, mortice marking gauge, william marples, w marples & sons, hibernia, shamrock, trifoil, tripple shamrock, carpenter's tool, cabinet maker, woodworking tool, drawing, planning, tool, wooden scribe, vintage, carpenter, marking tool, antique, marking out, joiner -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Barnes-Neville axis traction obstetrical forceps used by Dr Mitchell Henry O'Sullivan, Allen & Hanburys, England
Neville Barnes Obstetric Forceps have a cephalic and pelvic curve and are used for delivery of babies presenting as occipitoanterior. When used, the left blade is put on first followed by the right blade – the baby is then pulled down until the occiput is under the symphysis, then pulled around. (RACGP)Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Set of metal forceps. Consists of two blades [204.1,.2] and detachable traction axis [204.3]. Inner aspect of right hand blade is inscribed ' Allen and Hanbury's - London'. '3' inscribed on axis traction handle.'Allen & Hanburys - London', '3'obstetric delivery -
University of Melbourne, Burnley Campus Archives
Tool - Metalworking, Anvil
Cast iron metalworking tool. "A relic from the Principals' garage."metalworking, principal, tool -
National Wool Museum
Tool - Knitting Pins, 1960-69
The donor (Lynn Fitzpatrick) purchased these knitting needles 20 years ago from an opportunity shop. Aero Knitting Pins are a discontinued brand that were popular in the 1960s, 70s and 80s. They are made of smooth, aircraft-quality anodized aluminium. To this day, they are a popular and sort after knitting needle. Being a long-lasting product, they are often given as heirlooms. Abel Morrall was a major needle manufacturer from Studley, a town near Redditch. In 1785, Michael Morrall who was taught the art of needle making by a maternal uncle, moved to Studley. He founded the Abel Morrall company with his brother Abel, and another unnamed brother-in-law. Within five years the company was producing 40% of the 2.5 million needles that were made each week in the Redditch area. In 1811 the company introduced the concept of creating the eyes by using a stamping press. Additional machines were invented by them throughout the 19th century leading to major improvements in the way needles were produced. Abel Morrall demonstrated their needle making machinery at the Great Exhibition of 1851 and Queen Victoria personally inspected it. The company selected the demi-griffin for its trademark in 1861, which can be seen on older products produced by the company. Set of four knitting needles stored within paper packaging. Packaging features black, red, and white ink, detailing the selling points of the Aero Knitting Pins. The packaging folds with 3 main sections, each providing different insights into the knitting needles. Examples of this are " CANNOT SOIL LIGHT WOOL", "...SPECIALLY TAPERED POINTS WHICH WILL NOT INJURE THE FINGERS" and "RUSTLESS-NON-GLITTER FINISH". As the packaging unfolds, the grey knitting needles become visible. The needles can be removed from the packaging by sliding them through small bands of paper that hold the needles secure while in transportation. The four knitting needles are a “NEUTRAL” grey colour finished in a double point style.Printed. Orange, White and Black Ink Numerous, see multimediaabel morrall, knitting needles, knitting pins, 1960s home knitting -
Queenscliffe Maritime Museum
Machine - Winch
Known as a crab winch [or winch crab]. Hand operated, dual ratio, used for a multitude of applications; lifting, pulling marine items etc.Drysdale and Fraser, Melbourne -
Moorabbin Air Museum
Machine - Heron Primary Glider
Historical Details: . Description: The origins of the Museum’s Heron Primary Glider are obscure. The aircraft was discovered in a fruit packing shed in Upper Beaconsfield in 1943 by four young employees of the Commonwealth Aircraft Corporation, Jim Fullarton, Des Lynch, Don Bowd and Alan P. Level of Importance: State -
Flagstaff Hill Maritime Museum and Village
Tool - Caulking mallet, Mid 19th to early 20th centuries
The subject item is a vintage Nautical Shipwrights Ship Boat Caulking Hammer Mallet, Unusual Small Size. These mallets were routinely used in the 1800s when ships were made of wood. This mallet was used with caulking irons to drive the oakum (caulk) between the ship's bottom planking to seal them up. The mallet has slots to dampen the vibration of the mallet blows on the user's elbows. The head is made of a very hard wood, possibly Lignum Vitae or another dark tropical wood. The item seems to be of a very early design with the two preened-over metal rods for reinforcing the head. Item appears to be of early manufacture by an unknown maker from the mid to late 19th century and is significant as tools of this era are quite rare. This tool is also significant as it gives an insight into how ships made of wooden planks were made sea-worthy by inserting caulking material between the boards thereby making the vessel watertight. Caulking Mallet Wooden with iron ferrules on each end. Wooden head with two large bolts passing through body. Stamped W Milne. James S Steele tool box.Stamped W Milne & James S Steele tool box.mallet, flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, caulking mallet, caulking, james steele, shipwrights tools -
Mont De Lancey
Tool - Scarifier, Unknown
It was used on well worked ground.A combined hoe and rake metal headed hand scarifier or cultivator tool with a long wooden handle. It has three curved metal hooks with sharp points and was used to break up the ground. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes -
Wodonga & District Historical Society Inc
Tool - Sieba Gordon Gas Mask - North East Water Authority, Siebe Gorman & Co. Ltd, c1960
This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon -
Port Melbourne Historical & Preservation Society
Tool - Ruler, City of Port Melbourne Electricity Supply Department, 1994
(1) white & (1) pink 12" (30cm) plastic rulers promoting the City of Port Melbourne Electricity Supply Departmentlocal government - city of port melbourne, liana thompson, mayors -
Royal Australasian College of Surgeons Museum and Archives
Tool - World War 1 Surgical Army Kit
ww1, surgical set -
Churchill Island Heritage Farm
Tool - wedge, blacksmith made
An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.one of three wedges cut from one piece of steel. No relief grooves.timber splitting, churchill island heritage farm, olinda, shady creek, blacksmith made, wilfred dungan collection, wedge -
Whitehorse Historical Society Inc.
Tool - Bee Smoker
Pender Bros began in 1892 in Maitland New South Wales who supplied beekeeping supplies to the local beekeepers and later to beekeepers Australia wide. In the early 1970s was the largest factory in the southern hemisphere. In the late 1970s Pender Bros sold the beekeeping business in the late 1970s to the workers of Pender Bros and the name changed to Pender Beekeeping. The business moved to Rutherford New South Wales. The business was sold and changed to Pender Beegoods around 1989. In late 2002 it changed hands again to Pender Beekeeping Supplies and moved to Cardiff, Lake Macquarie New South Wales.Metal cylinder with hinged lid with spout on top. Cylinder for containing smoking medium connected by hose (missing) to small bellows on base. Marked on base with Pender Bros Ltd Makers West MaitlandPender Bros Ltd West Maitland (New South Wales)bee keeping -
Bendigo Historical Society Inc.
Tool - Hand Made Nails 1890
These are samples of "cut nails", cut from sheets of steel and then a head flattened. The star/rose head, identifies them as Ewbank nails. These were first patented in 1869 and were cut with the grain of the steel running vertically down the nail. This made them particularly strong and they were probably the most common type used in Australia because the were particularly good for Australian hardwoods9 handmade nails with greenish colored square shape top raised in the centre. All nails are bent at the bottom and are 4.5cm - 5cm in length all showing signs of rust. Handmade Nails 18901890, handmade nails, antique tools -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Moulding Plane, 1832-1864 made in London
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about J Budd is that he was a tool maker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane J Budd London & No 12 opposite end stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j budd