Book, hard bound with photo jacket, 320 pages, sewn binding with glued end papers, printed on gloss paper, titled "Australian Trams Through the Ages", compiled by Maurice Kelly of Topmill Pty Ltd. Limited Edition - number 340 of 1000. Published 2015, has a table of contents listing photos of 22 tramway systems, including Gold Coast light rail, Museums horse trams, include some light railways such as Aramac. The Melbourne section includes Doncaster, horse trams, cable trams, electric trams, a maps c1950 and 1956, 1981 and PTV map of July 2014. many electric trams, generally photos by Arthur Perry, including an E class tram. Features tram 5012 on front cover.trams, tramways, topmill, maps, melbourne, cable trams, horse trams, mmtb, melbourne, ptc

Twelve page booklet, titled "Ballarat and Bendigo, Victorian Tramway Preservation" written by D. Menzies and J.H. Price, reprinted from Modern Tramway. Front cover has BTPS tram 38 on original depot fan, green banner centrally with title, and Bendigo Birney No. 28. A circular white sticker with "1.00" written on is stuck on the right hand side, centrally. Saddle stapled print in black ink on 120gsm art paper. Written material covers background history of both Ballarat and Bendigo tramways, tramcars, closure, the formation of the BTPS and the Bendigo Trust tramways and their operational history up to about mid 1975 as it mentions the first COTMA meeting. Also has 12 photos inside. On rear cover is an advertisement for the TMSV and the Light Railway Transport League (UK) (LRTL) PDF copy of book added 16-3-2017 Price sticker as noted abovetrams, tramways, ballarat, bendigo, lrtl, tram preservation

Twelve page booklet, titled "Ballarat and Bendigo, Victorian Tramway Preservation" written by D. Menzies and J.H. Price, reprinted from Modern Tramway. Front cover has BTPS tram 38 on original depot fan, green banner centrally with title, and Bendigo Birney No. 28. A circular white sticker with "1.00" written on is stuck on the right hand side, centrally. Saddle stapled print in black ink on 120gsm art paper. Written material covers background history of both Ballarat and Bendigo tramways, tramcars, closure, the formation of the BTPS and the Bendigo Trust tramways and their operational history up to about mid 1975 as it mentions the first COTMA meeting. Also has 12 photos inside. On rear cover is an advertisement for the TMSV and the Light Railway Transport League (UK) (LRTL). PDF copy of full book added 16-3-2017."D. W. Lees 2/2/76" on top of page 2 and "D. W. Lees" on side of page 10 in a fine felt pen ink.trams, tramways, ballarat, bendigo, lrtl, tram preservation

693.1 - 8 page pamphlet centre stapled, titled "50 Questions and Answers about Trams", mid 1950's, providing questions and answers about trams , transport, fares, riding, traffic, buses, motorists, rails, streets, noise, comfort, rates, scrapping, public views. Issued by the Light Railway Transport League, (LRTL), printed in London, refers to the London underground in one point. 693.2 - 12 page pamphlet, centre stapled into a green card cover, titled "50 Questions and Answers about Trams in Australia" similar in wording to the LRTL edition but with some changes. Has a photo of Brisbane FM 483 on the top of the front page. Issued by the AETA, who note the original version at the base of page 11. Published by Traction Publications, Caulfield. Title of publication hand written on green card cover.693.1 - In top right hand corner - written in red ink "Melb Library", blue ink "LRTL edition" and stamped "Australian Electric Traction Association" on front cover. 693.2 - On cover stamped "Australian Electric Traction Association" and hand written "AETA Edition" and stamped "Australian Electric Traction Association" on top of the first page and stamped "Australian Electric Traction Association" on rear cover.trams, tramways, trams, tramways, aeta, lrtl, pamphlets, uk, brisbane

A large photo of soldiers from the first World War. It is almost identical to one in the AWM. From the AWM record it is the 2nd Pioneer Battalion before they returned to Australia. From Wikipedia the 2nd Pioneer Battalion was tasked with digging trenches, labouring, constructing strong points and light railways, and undertaking battlefield clearance, the troops assigned to the pioneers required construction and engineering experience in addition to basic soldiering skills. After the Armistice personnel were repatriated to Australia in drafts as part of the gradual demobilisation of the AIF, the battalion's strength dwindled until finally it was disbanded on 18 May 1919 while in the Charleroi area of Belgium. The men are standing on the steps of the Palais de Justice in Charleroi. The lion is one of a pair made by Antoine-Felix Boure a Belgium sculptor, who was renowned for his portrayal of lions. This pair is called Totor et Tutur. The Palais de Justice was replaced by a new building in the 1960s and the lions now stand in the garden of the Palais de Justice. The soldiers wear different uniforms depending on their rank. This photo is a good example of some of them. Legatee Philip E Potts who was president in 1927-28, was a Captain in the 2nd Pioneer Battalion and is likely to be in this photo. Or the photo belonged to him. Another photo of L/ Potts is labelled Charleroi 1919 and mentions a 2nd Division Concert Party and his war record at NAA says he was assigned to the Concert Party at that time.Legacy was founded by returned soldiers from World War 1, hence some founding legatees may be in this photo.Sepia photo of the 2nd Pioneer Battalion on the steps of a building.soldiers, world war one, lion, charleroi, 2nd pioneer battalion, uniforms, philip e potts

Rail tractors were popular with Victorian sawmillers. They were generally cheaper than a steam locomotive, required no special qualifications to drive, and used proven power plants for which spares were available locally. The tractor was constructed by Day’s Engineering of South Melbourne which, although better known for its pumping equipment, built more than fifty rail tractors for Victorian sawmillers and other industrial tramway users. W. Day & Sons is believed to have constructed its first light railway locomotive in 1926. From then until the mid 1940s, the firm appears to have built at least fifty locomotives at its premises in South Melbourne, of which roughly half were four-wheel locomotives and roughly half were six-wheel locomotives like the restored Day’s rail tractor formerly operated by Ruoak Timbers. Of the four-wheel locomotives, ten were 2-ft (610mm) gauge locomotives similar to this one. Today, only two survive, a complete example at the Puffing Billy Railway Museum at Menzies Creek, and one at Alexandra Timber Tramway Museum This 2-ft gauge 4wPM locomotive is believed to have been one of two Day's Petrol Rail tractors formerly used by Cheetham Salt, possibly at the Moolap works near Geelong. Service History :owned by Cheetham Salt, Moolap ( dates unknown ) Geelong Steam Preservation Society , Belmont 1973 ? Puffing Billy Steam Museum , Menzies Creek Historic - Industrial Narrow gauge Railway - Rail Tractor used by Cheetham Salt Company works at Laverton, Moolap and Geelong, Victoria , Australia Petrol Rail Tractor made of Iron , wrought iron, steel puffing billy, industrial narrow gauge railway, rail tractor, days engineering, cheetham salt,, petrol rail tractor

Yields information about the removal of the overhead in Lydiard St North, following the closure of the SEC operated tram system in Sept. 1971Set of two colour digital images taken by W. J. Llewelyn of the removal and cutting up of the overhead and cutting the copper trolley wire in Lydiard St North - Oct. 1971? Shows the method and equipment used. Has a van marked "Arch Smallgoods" in Lydiard St North. Shows the Mair St traffic light, and Railway Hotel on the corner. In the background is the George Hotel, St Paul's Technical College, and Union Fidelity Trustee Company buildings in the background. Warren Doubleday remembers being there at the time, but can't find a photograph of it and date.trams, tramways, lydiard st, closure, secv, overhead, demolition

Flanged Tramway Rails - sections from The North Eastern Steel Co. Ltd. Middlesborough - see https://www.gracesguide.co.uk/North_Eastern_Steel_Co 1 - Walthamstow & District Light Railways BS Section No. 3C - 106 lbs. per yard 1904 - Dick Kerr & Co. Contractors London. See https://en.wikipedia.org/wiki/Tottenham_Outrage 2 - Bath & District Tramways 95 lbs per yard 1903 - George Hopkins & Sons Engineers London 3 - Burton on Trent Tramways 90 lbs per yard 1903 - Messrs Kincaid, Waller & Manville, Consulting Engineers 4 - Swindon Corporation Tramways BS Section No. 4 C, 111 lbs per yard, 1904 - Messrs J G White & Co. Ltd, Contractors London 5 - Wigan Corporation Tramways BS Section No. 5, 100 lbs per yard, 1903 - Messrs J G White & Co. Ltd, Contractors London 6 - Derby Corporation Tramways BS Section No. 6, 107 lbs per yard, 1904 - Messrs J G White & Co. Ltd, Contractors London 7 - Nottingham Corporation Tramways BS Section No. 1 , 90 lbs per yard, 1903, J. G. White Ltd, London, Contractors. 8 - Swindon Corporation Tramways, BS Section No. 4, 105 lbs per yard - Messrs J G White & Co. Ltd, Contractors London, Messrs Lacy & Sillars Consulting Engineer 9 - Kalgoorlie Electric Tramways BS Section ? 96 lbs per yard. 1904 - Messrs J G White & Co. Ltd, Contractors London 10 - Leicester Corporation Tramways & Track? 100 lbs per yard 1903, I George Maybey? MICE Engineer 11 - Ipswich Tramways 90 lbs per yard, 1902, Dick Kerr & Co. Contractors London Shows the type of tramway rail and cross section produced by The North Eastern Steel Co early 1900's, the relationship to the British Standard and who used them. Provenance of the item not fully known. Possibly given to the Electric Supply Co of Victoria at the time when they would have been ordering rails for use in Ballarat. May have been collected by other parties.Plywood sheet, covered in black cloth displaying 11 different British Standard Rail Sections made by The North Eastern Steel Co. Ltd. Middlesborough , early 1900's. Each section secured with two 20mm (¾”) long, 3mm dia (1/8”) machine screws, countersunk with a slotted head from the rear. All nickel plated on both sides, engraved as to the tramway used on, date of production on the head of the rail, Designing Engineers on the web and the manufacturer on the foot of the rail. Cloth secured with staples and drawing pins on the rear. On the rear is a chalked sign, the principal one being "No Thoroughfare"Engraved as listed.tramway rails, rails, tramways, north eastern steel co, middlesborough, walthamstow, bath, burton on trent, swindon, wigan, derby, nottingham, kalgoorlie, leichester, ipswich, j g white & co, dick kerr

BENWERRIN COAL COMPANY SKIP This quarter ton coal truck or skip was used at a small mine situated at Benwerrin near Deans Marsh in Victoria’s Otway Ranges. The mine first opened in 1899 and closed in 1904. With the fuel shortages due to World War 2, the Benwerrin Coal Company reopened the mine in 1941. The coal was loaded into skips and winched out of Box’s Creek valley on a narrow gauge incline to a loading point that was close to the Deans Marsh-Lorne Road. It was then taken by road to the Deans Marsh Railway station. The average gradient of the tramway was 1 in 4 over a length of just under 500 metres (1600 feet). The gauge of the tramway has often been referred to as 375mm (or 15 inches) as shown on the map opposite taken from “Sawdust and Steam”. However, actual measurements of the wheels show the gauge to be 400mm (or 16 inches), which is quite unusual as is the small size of the skip itself. The mine produced up to 30 tonnes of brown coal each week until it closed in 1949 and the incline tramway and its skips were abandoned. Preservation of this coal truck came as a result of interest by the Tramway Museum Society of Victoria (TMSV) in the Barlow or Box type rails that it ran on. These rails had originally come from the Beaumaris Horse Tramway and were obtained by the Benwerrin Coal Company from Hayden Bros’ abandoned timber tramway at nearby Barwon Downs. Members of the TMSV visited the mine in the 1960s only to find that most of the tramway had recently been recovered for scrap. There remained a significant number of relics around the mine adits including most of the skips. One of these remained in good condition and it was recovered for preservation in May 1967. It was restored but never displayed and a second restoration took place by the author over 2012/13 so that it could be placed in the Menzies Creek Museum where it was delivered in February 2013. Little remains of the mine today with trestles and sleepers destroyed in the “Ash Wednesday” Bushfires in 1983. References: Houghton, N (1975), Sawdust and Steam, Light Railway Research Society of Australia. Historic - Industrial Narrow Gauge Railway - Benwerrin Coal Company , Benwerrin , Victoria, AustraliaCoal Skip - made of Iron sheet and wrought iron frame & wheelsB,C.Co Melbournepuffing billy, coal skip, benwerrin coal company, narrow gauge

The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon suppied in 1889 (Couillet builder's number 986, Decauville serial number 90). It was named Carbon. The West Melbourne gas works sourced its coal from Maitland, New South Wales, and the coal was brought by ship to a wharf adjacent to the West Melbourne gas plant. John Benn and Carbon were used to haul the coal over a 762 mm (2 ft 6 in) gauge railway from the wharf to the gasworks, a distance of about 450 metres (500 yards). West Melbourne Gas Works No. "Carbon" Wheels: 0-4-0T Builder: Couillet Build Date: 1890 Construction No.: 986 Empty Weight: Unknown Weight on Drivers: Unknown Driver Diameter: Unknown Tractive Effort: Unknown Boiler Pressure: Unknown Cylinders: Unknown Fuel: Coal Gauge: 30 Decauville locomotives The firm Société Anonyme Decauville located at Petit Bourg, France, was founded to manufacture light railways pioneered by French farmer Paul Decauville to transport crops from the field in 1875. Decauville began designing their own locomotives in 1882, although initially manufacture was contracted out to other builders, notably the Belgian firm Hainault at Couillet Although not well known in Australia, in Europe Couillet was a significant builder of steam locomotives of many different gauges and sizes over a long period of time. The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon (986) . Carbon ( 986 ) The locomotive weighs approximately seven tons. It has the Couillet builder's number 986. of 1889 It was built for Decauville & Cie. of Paris, suppliers of portable and industrial railway equipment, and has their serial number of 90 of 1890. Built in 1889 for the West Melbourne site of the Metropolitan Gas Company, it is a four-wheel tank locomotive and was named “Carbon”. It was withdrawn from service in the 1930s and stored until sold privately in 1962. For a few years in the 1960s it was used on a circle of track at Walhalla, before going to the Whistle Stop Amusement Park in Frankston. Although a number of similar locomotives still exist, as far as is known Carbon is the only one still operating in its original condition. Historic - Industrial railways - Metropolitan Gas Company Ltd, Melbourne Steam Locomotive Small Decauville Couillet Steam locomotive. - Iron & wrought iron framesCouillet builder's number 986, Decauville serial number 90puffing billy, narrow gauge, industrial narrow gauge railway, couillet 986, decauville 90, steam locomotive, metropolitan gas company, carbon

Six issues of "Tram Tracks - The Electric Traction Monthly" of the Australian Electric Traction Association. Each issue has a standard cover, of the magazine name etc, featuring "Wee Folks Productions" models but are in different colours, all have been saddled stapled with two staples, except No. 6. The Volume and date details have been over printed. Back covers inside back covers have the same advertisements but the font varies vary. The six issues contain advertisements for the Wee Folks productions, Hartleys Sports store, Hearns Hobbies, Wattle Park, Johnson's Variety Store, Barnes Tennis Centre, The Model Dockyard, Robilt Models, Meadmore Model Engineering and Austral Bronze Pty Ltd, Hearns Hobbies, Christie Scale Model Railway and Equipment, Herbert Small (Meccano), the American Subscription Agency, Manufacturers' Mutual Insurance Ltd. 2465.1 - Vol. 2 No. 1 - 16 pages, Jan 1947, with cover printed in red. Has articles on the tram / car debate, Dunedin Tramways, Overlapping fare sections, type of trucks under Sydney tramcars, Brisbane Electric Railway (Power station), The Balmain Counterweight and Trolley buses in Australia. News items include Brisbane, Newcastle, Sydney, Melbourne, SEC, Hobart, VR, Adelaide, Kalgoorlie, Broome, electric trains in Melbourne and Sydney, and AETA notes. Photos include Sydney O, OP and P, VR PERM 63 and interior photo of a MMTB W4 class tram. 2465.2 - Vol. 2, No. 2 - 16 pages, Feb. 1947, with cover printed in dark blue. Has articles on Brisbane 400 class tramcar, Adelaide to Glenelg Brighton - Le Sands tramway, Melbourne Suburban railways, Diesel Electrics on the Southern Railway (US)and Birney Safety Car. News items include Brisbane, Sydney, Melbourne, VR, Fremantle and AETA notes. 2465.3 - Vol. 2, No. 3 - 12 pages, Mar. 1947, with cover printed in brown. Has articles on why NSW trams lose money, Duncan and Frazer, new trams in Johannesburg, Melbourne Suburban railways, and Sydney New Railway (Eastern Suburbs). News items Sydney, Melbourne, SEC, VR and Adelaide and AETA notes. 2465.4 - Vol. 2, No. 4 - 16 pages, Apr. 1947, with cover printed in green. Has articles on Duncan and Fraser (continued), In search of Ancient Warriors (old trams), Brisbane Electric Railway and some unusual fares arrangements. News items include Brisbane, Newcastle, Melbourne, Sydney, SEC, Launceston, Kalgoorlie, overseas, and AETA notes. Editorial looks at claims that the SW6 cars are the finest in the world, back numbers (notes that Tram Tracks started with a mimeographed club news sheet and now have circulation of nearly 200), costs of production etc. Has photographs of the interior of a SW6 850, a plan for Melbourne underground railway, the VR power operations room at Flinders St., Hobart trolley bus and a cartoon about Sydney traffic. 2465.5 - Vol. 2, No. 5 - 16 pages, May 1947, with cover printed in red. Has articles on Australian Light railways, Sydney's relief lines and the start of an article on NSWGT 600/1200V tramcars. Has news items on Brisbane, Sydney, MMTB, VR, Geelong, Ballarat, Launceston, Hobart and AETA notes. Editorial notes the first anniversary of the magazine and has a number of letters regarding this, content and the tram/car debate. 2465.6 - Vol. 2, No. 6 - 20 pages, June 1947, with cover printed in blue. Has articles on Cremorne bridge replacement (with photos), Neutral bay line and Tramcar transmission gears. News items include photos of MMTB track replacements, crowded trams, Brisbane, Sydney, Melbourne, and a photo of a Sydney tram passing under the new bridge work for Circular Quay station. 2465.7 - Vol. 2, No. 12 - pages 1-12, cover has an advert for Hartley Sporting Goods. Has cartoon on fares on Sydney trams by Peterson, not regarding retirement of Mr. H. Bell of MMTB, Melbourne Latrobe St and bus construction, Sydney tram cartoons from Emile Mercier, electric trains and other tramway news. (Item added 24-3-18 - from consolidation of Melbourne Tram Museum and BTM collections) trams, tramways, electric traction, aeta, models, australian tramways, duncan fraser, cartoons

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

Named in 1845 by Wilhelm Karl von Haidinger cerussite takes its name from the Latin cerussa, meaning 'white lead'. When viewed under certain lighting conditions cerussite gives of fire and rainbow-like colours (due to its high dispersion) and it is quite sought after by geological collectors for this very reason. Cerussite is usually found in the oxidised zone of lead ore deposits. It is a very common weathering product of galena and other lead ore minerals. It is a secondary mineral, meaning it forms as a result of the alteration of pre-existing minerals in the Earth’s crust. The presence of lead in cerussite makes it potentially toxic. Historically, it has been an important source of lead, which has numerous industrial applications, including in batteries, construction materials, and radiation shielding. Cerussite has a crystal structure that belongs to the orthorhombic crystal system. Its crystal structure is characterized by a three-dimensional arrangement of atoms in a repeating pattern. The crystal lattice of cerussite consists of interconnected lead (Pb) and carbonate (CO3) ions. This crystal structure is visible in the specimen. This specimen was found in Dundas (formerly Mount Dundas), a historical mining locality, mineral field and railway located on the western foothills of the West Coast Range in Western Tasmania. During the 1890s Dundas swelled in numbers however it is now lost in a temperate rainforest and its population is now 2. The present Dundas Extended mine, about 1.5 km east of Dundas is presently worked for specimen material.Faceted cerussite gems are considered rare and valuable, given the softness of the mineral. This item is not a faceted gem however its historical and scientific research potential give it significance; mined in an Australian township, this cerussite could shed light on the now lost history of Dundas and the mining that occurred there. Additionally, the uses of this mineral in historical industrial processes give it scientific significance. Such knowledge can add to understandings of the geographical and geological nature of Western Tasmania and allow for further study of Australian geological specimens. A small lead carbonite mineral with shades of cream, white and brown throughout, flaky shards of white at base. CERUSSITE / (lead carbonite) / Locality: Dundas, W. Tasmaniadundas, tasmania, cerussite, lead, orthorhombic, geology, minerals, mining

In the beginning of the19th century, the main mode of transportation was the horse and carriage. Even after the advent of the railway, remote areas still relied on the horse for local transport.Until Australian coachbuilders began making buggies from the 1860s, most were made in America Buggies with four wheels were light but comfortable. Many had hoods to keep the sun and rain off passengers. They were generally owned by doctors, ‘squatters’ and business people. Some had small turn-out seats at the back for children. Lamps are placed at different places on the carriage sides: 1 lamp on each side placed close to box seatThese lanterns are examples of lighting devices used in the time of horse and carriage transport.Two kerosene lanterns - buggy lamps.They are rectangular in shape and have a chimney on top. Both have carrying handles.There are 3 glass windows having two clear white lights and one small red round light on the back. The ceramic burner is made by Barton's.On ceramic wick holder - B in the middle of BARTONS B Underneath is TRADE MARK lighting kerosene-lights buggy-lamps transport lanterns

http://en.wikipedia.org/wiki/Horse-drawn_vehicle http://www.coyaltix.com/lamps.htmlThe candle light needed to be protected from the wind. This removeable light or lantern has 4 sides with 2 oblong bevelled glass panals, 3rd panel is plain with a heat vent and the 4th opens to light the lamp and has a 4.5 cm round red glass which would act as a reflector. The candle holder screws out to allow for a narrow candle to be inserted. It has a black ventilated cover on top and has slide fixture to attached the lamp on to the carriage. . Powerhouse Museum Collection Thesaurus Protected lamps or lanterns, fixed or removable, used on coaches or carriages. Commonly made of brass, they often were fitted with reflectors as well as red lenses to serve as tail lights (Art and Architecture Thesaurus).red and clear glass lenses light candle reflector bevelled glass horse buggy tail light

http://en.wikipedia.org/wiki/File:Tilley-storm-lantern-X246-May- Tilley storm lantern, this model has been in production since 1964 The Tilley Lamp derives from John Tilley’s invention of the hydro-pneumatic blowpipe in 1813 in England. http://en.wikipedia.org/wiki/Kerosene_lamp#Pressure_lamp Pressure lamps are far more sophisticated than wick lamps and produce a much brighter light, although they can be quite complicated and fiddly to use. This type of lamp is commonly known in the UK as a "Tilley lamp", after a manufacturer of the same name, and in North America as a "Coleman lantern" for similar reasons. A kerosene blowtorch displaying the various aspects of the kerosene burnerA pressure lamp has a fuel tank at the bottom with a small pump to pressurise the kerosene. There is a narrow gap up to the top of the lamp, called a flue, and at the top of the lamp there is a burner (gas outlet). Directly underneath the burner is the mantle, a fabric bag coated with chemicals that incandesce when heated by the gas flame. The burner lamp is known for its brightness. It is so bright because of the amount of pressure that is placed onto the wick. This pressure allows a steady flow of the gasoline and a constant light Tilley Storm Pressure Lantern, model no x246 has a stainless steel base which is filled with kerosene, with a pump used to pressurize the kerosene vapor. Under the base is a sticker.On top is a black hood with vents which sits on the glass heat resistant shade. The glass shade has an etched label. It has a white and pink mantle on the central rod with a long shaped stainless steel handle, this folds down when not in use.Base - Sticker Tilley Lamp Model X246 Etched on glass shade Tilley, Durosil, ITI, Heat Resistant. Made in Englandlantern tilley pump pressure mantle kerosene methylated spirits stainless steel lamp kerosene lamp round glass cylinder

painted for Nell McCleanPink rose in full bloom with buds and foilage on light green back ground . On cardboardpainting by mrs p artis home hotel nell mcclean

The Grinton Collection. Standing on the ground 2nd from the left Sgt Coffey. Refer Cat No. 1280 for Jack Grintons service details. Photograph framed. Photograph - black and white photograph on paper, depicting twelve troops sitting and standing in the doorway of a railway wagon. Frame - timber, light varnish finish, Perspex front, cardboard backing."Group I: Living behind the lines". "K. Troop train"framed accessories, camera on the somme, ww1, 38th bn, grinton

Students attended Sunday School classes at the Tawonga Sunday School in 1898. Historical: Religious Education: This book was given by teachers to students who attended classes at the Tawonga Sunday School in 1898.Very old bound book. Brown coloured linen with a branch of blackberry vine with light green and yellow leaves drawn on top third of cover. Centre front is the title (David Elliot) printed in capital black letters with the D and E larger than the following letters and enclosed in a clear coloured rectangular box that has a thick 'railway line' border on its top and bottom. The bottom third has red leaves and black berries with thorns and the sub title in the same font but much smaller in size. the top and bottom to the cover has a border. Nothing on the back. David Elliot on the SpineAwarded to Annie Sullivan by the Tawonga Sunday School 27/11/(18)98religion, tawonga, sunday school, religious education, novel

The Original Station Master's House, Circa 1905, Eltham Auction; Diamond Valley News, March 17, 1992 The advertisement states the house is circa 1905 which is approximately correct. When the railway first came to Eltham in 1902 there was no appointed Stationmaster. The Guard on the train was the general oddsbody who did everything including sell tickets and station master duties. There was some discontent about this situation. It was probaly a few years before a permanent stationmaster was appointed but no reference to that has yet come to light. The house form photos dated in 1983 certainly had the appearance of an Edwardian style (1901-1910). The advertisement also states the house was in the centre of Eltham till 1985 before it was shifted from its original site to 58 Park Road.. The auction date is scheduled for Saturday April 4th - which would have been 1992. Essentially the house was sold in 1986 for $1 to save it from demolition and was then relocated to 58 Park Road. A Bill McGilvray was Stationmaster and lived in the house in the 1960s. A check of the 1968 Electoral Roll (via Ancestry) shows William John McGillivray, Station Master at the Station Residence, Eltham. Also at the same address in 1968, Marjorie Jean McGillivray, home duties, Station Residence, Eltham and Dianne Marjorie McGillivray, teacher, Main Road, Eltham. From the available records digitised, William first appears at the Station Residence in 1963. William and family were still in the residence in 1977 but by 1980 William, still Station Master, was living in Bible Street, so not sure who was in residence if anyone between 1980-1986. A property report shows the site at 58 Park Road was sold in 1983 and the relocated house on the site was then sold in 1992, then 2000 and most recently in April 2022. 58 park road, 967 main road, auction, auction sale, businesses, eltham, eltham railway station, houses, main road, park road, property, real estate advertisement, station masters house, station master's house eltham

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Kodak Kodachrome colour positve transparencyKodak Kodachromederailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 12.6 x 18.6 cm colour printb class diesel-electric locomotive, b80, derailment, dunolly, dunolly railway station, t-364, t-383, t-class diesel electric locomotive, victorian railways, wheat train

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive

GC visited Dunolly with his late father-in-law who used to be a gold miner up there. They were going past the station and noticed a wheat train had derailed in the yards and so he took the opportunity to photograph the goings-on. The fellow in the light grey slacks and beige shirt with tie approached GC and asked him what he was doing. He proposed that GC leave or alternatively, take as many photographs as he desired and then send him a complete set of prints, which GC did.Digital TIFF file Scan of 35mm Ilford XP1 black and white transparencyderailment, dunolly, dunolly railway station, george coop collection, t-364, t-383, t-383 locomotive, t-class diesel electric locomotive, victorian railways, wheat train, y-150, y-class diesel electric locomotive