Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Black and white photocopy of probably colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Black and white photocopy of probably colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, steve, alan

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, alan

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

A clamp is a fastening device used to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure. In the United Kingdom the term cramp is often used instead when the tool is for temporary use for positioning components during construction and woodworking; thus a G cramp or a sash clamp but a wheel, screw or surgical clamp. There are many types of clamps available for many different purposes. Some are temporary, as used to position components while fixing them together, others are intended to be permanent. In the field of animal husbandry, using a clamp to attach an animal to a stationary object is known as "rounded clamping." A physical clamp of this type is also used to refer to an obscure investment banking term, "fund clamps." Anything that acts to hold two surfaces together may be called a clamp, so this gives rise to a wide variety of terms across many fields. The subject item is a wooden-handled screw clamp used in cabinet or woodworking projects to hold two surfaces together while glueing or fixing. An item that has not changed in shape or use since its inception hundreds of years ago. These types of clamps are still produced today in many sizes by many woodworking tool companies.Wooden hand Screw Clamp two lengths of wood each beveled at one end and standing parallel. Two long wooden screws with handles and predominant thread that fits through wood lengths.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wooden screw clamp, carpenters tools, cabinet makers tools, clamp

A clamp is a fastening device used to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure. In the United Kingdom the term cramp is often used instead when the tool is for temporary use for positioning components during construction and woodworking; thus a G cramp or a sash clamp but a wheel, screw or surgical clamp. There are many types of clamps available for many different purposes. Some are temporary, as used to position components while fixing them together, others are intended to be permanent. In the field of animal husbandry, using a clamp to attach an animal to a stationary object is known as "rounded clamping." A physical clamp of this type is also used to refer to an obscure investment banking term, "fund clamps." Anything that acts to hold two surfaces together may be called a clamp, so this gives rise to a wide variety of terms across many fields. The subject item is a wooden-handled screw clamp used in cabinet or woodworking projects to hold two surfaces together while glueing or fixing. An item that has not changed in shape or use since its inception hundreds of years ago. These types of clamps are still produced today in many sizes by many woodworking tool companies.Wooden hand Screw Clamp two lengths of wood each beveled at one end and standing parallel. Two long wooden screws with handles and predominant thread that fits through wood lengths.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wooden screw clamp, carpenters tools, cabinet makers tools, clamp

The author was Mr. Salmon (Thomas Salmon), (1679-1788). The fly page of the book has the following writing in red and black print: "Describing their Respective Situations, Persons, Habits, and Buildings; Manners, Laws and Customs, Religion and Policy; Arts and Sciences, Trades, Manufacturers and Husbandry; Plants, Animals and Minerals. Illustrated with Cuts and Maps, accurately drawn according to the Geographical Part of this Work by Herman Moll. Third Edition with considerable Additions and Improvements, interspersed in the Body of the Work: Also the History and Revolutions of each Country, brought down to the present Time. " Thomas Longman founded his publishing firm in 1724 in London by the name Longman. In August of that year, he bought the two shops and goods of William Taylor and set up his publishing house there at 39 Paternoster Row. The shops were called Black Swan and Ship, and it is said that the 'ship' sign was the inspiration for Longman's Logo. After many changes of name and management, including the name T Longman and T Shewell in 1746. The firm was incorporated in 1926 as Longmans, Green & Co. Pty Ltd. The firm was acquired by Pearson in 1968 and was known as Pearson Longman or Pearson PLC. The book is part of Flagstaff Hill's Pattison Collection, a large group of books and records, some of which are rare and valuable. The collection was originally owned by the Warrnambool Mechanics' Institute, which was founded in 1853 and is named after Warrnambool's Public Librarian, Ralph Pattison.The book is significant for its age – it is one of the oldest books in Flagstaff Hill’s collection, published in 1746. The book is a record of Modern History at that time and allows studying and comparing those times with today. The book is important for its connection with the London publisher T Longman and T Sewell, who only operated under this name between 1745 and 1747. The firm has been established for over two centuries and is renowned for publishing encyclopedias, dictionaries, books on English grammar, textbooks, poetry, reference books, novels, magazines and more. The book has additional importance for its connection to the Pattison Collection, which, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institutes’ Collection. The Warrnambool Mechanics’ Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and its important role in people's intellectual, cultural and social development throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance.Modern History: or, the Present State of All Nations Vol III Author: Mr. Salmon (Thomas Salmon) Illustrator: Herman Moll Publisher: T Longman and T Shewell in Paternoster Row, London Date: 1746 (MDCCXLVI), 3rd Edition Further Information: In Three Volumes, Vol. III The large hardcovered book has reinforcing on the spine and corners. The cover is very well worn and has remnants of a coloured design. The fly page is printed in red and black ink and has a long description of the contents. Inside the cover is printed a Coat of Arms. There is a stocker on the inside cover, The book is part of the Pattison Collection.Label on the spine "RH F910 SAL" Sticker on the pastedown front endpaper "Corangamite Regional Library Service" Printed on pastedown front endpaper "Coat of arms, crown above a shield with an inverted V with three stars on it" Sticker on front loose endpaper "Coat of arms, with "F C G Ritso"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, pattison collection, ralph eric pattison, warrnambool mechanics’ institute, mechanics’ institute library, warrnambool library, free library, corangamite regional library service, mr salmon, thomas salmon, 18th century, 1746, history, geography, social studies, culture, maps, modern history, present state of all nations vol iii, herman moll, t longman and t shewell, social history

The leather headstall is connected to the metal bit are used in conjunction with a set of leather reins to guide and steer a horse or other similar animal. Made in Melbourne in 1900.The horse bridle and headstall were used in Warrnambool in the early 20th century. Bridle bit and headstall; horizontal metal oval shaped bit with a narrow rod each end that finishes in a narrow loop. Adjustable leather straps with holes are threaded through the narrow metal loops.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, horse husbandry, horse equipment, horse riding, 1900, melbourne, headstall, bridle, horse headgear, riding gear, horsemanship, equestrian equipment, headgear

Robert Whatmough and family lived at Willis Vale from approx 1863 to 1878. Willis Vale was later owned by the Partington family. In this photograph the family is involved in butchering a pig. The people have been identified as: Mary (Hill) Whatmough b1813; and her daughter Rosalie b1856; Grandpa John Wilson; Joseph Wilson b1835; Emmett Whatmough b1842; John Thomas Fielding b1860; James Fielding b1861; Robert Whatmough b1815; [Sarah Whatmough b1845 m1866 Joe Wilson b1835 8 children]. Photo and article also appeared in The Diamond Valley News 9/10/1984 page 26.Early evidence of farming and animal husbandry in the Greensborough area.Black and white photograph, enlarged and mounted on timber backing.Typed caption pasted on front of photograph: 'Robert Watmaug [sic Whatmough] and family slaughtering pig at Willis Vale Greensborough.' Identification of those in photo by Faye Fort 2015.robert whatmough, whatmough, willis vale, greensborough, wilson