This type of cast iron kettle was used by pioneer families, mainly rural in the early 1900's upon open fires (log). It covered rural activities that needed a constant readily available source of boiling water, in or mainly outside the kitchen of homesteads. This kettle was used in the early to late 1900's for the refreshment of stock men and farmers that had irregular "tea" breaks under sometimes hard and gruelling conditions.This kettle belonged to and was used by a Kiewa Valley, pioneer family, the Roper Family. This kettle was moved from their Kiewa Valley property to their hut built on the Bogong High Plains. The Bogong High Plains area provided Kiewa Valley cattlemen a good supply of fodder to supplement their Kiewa Valley grazing areas. This "camp draft" activity , in the high plains, could take up to six weeks.This large cast iron modified camp pot (cauldron) has a long tap connection located at the bottom end. The "tap" is made from brass and has a simple elongated "bar" control swivel at the end to control the water flow. The tap suggests that only water was heated (to a constant boil) for the replenishment of cattlemen's, or other horse rider's, tea or coffee mugs. Refreshments at a "temporary" location on the Bogong High Plains. There was a "log" hut built by the Roper family as temporary accommodation for cattlemen and other family members.Ot the flat bottom "FIRST QUALITY 2 GALLONS"camp fire cooking utensils, hot plate, cast iron cooking appliance, drovers kitchen

This artefact is a functional, non-decorative fitting that essentially transports gas from a wall attachment to a lamp. It is a brass and copper gas lamp fitting, designed to direct and control the flow of gas from a flanged wall fitting to an exit nozzle that was lit. It was raised from the LOCH ARD shipwreck site by Flagstaff Hill divers in 1972. Related pieces can be found in the Maritime Village collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal; some of which was to be on show at Melbourne’s first International Exhibition in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s southwest coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens were already well-advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas-lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, the four cases of brass gas light fittings on board would probably have found a ready market.The LOCH ARD shipwreck is of State significance — Victorian Heritage Register S417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. This pipe is a gas lamp fitting. This extensively corroded fitting is made of brass and copper alloy. It comprises a 31 cm copper pipe of 1.5cm diameter which is connected to a 6.5cm diameter wall flange (via a flow tap and an adjustable swivel valve) at one end, and to a screw-in square coupling with a nozzle or gas jet at the other end. The copper pipe is dented and corroded and has three holes. The brass attachments are a more robust cast metal but the adjustable mechanisms are concreted into immobility by ocean sediment. No discernible maker’s marks. In unrestored but fair condition. The pipe with the fitting was recovered from the wreck of the LOCH ARD.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting

Domestic Water Service Ferrule Stop Cock. Water escaping past the thread in the tapping saddle has mixed with sand bedding material and caused sand abrasion on the stop cock.Brass pipe shaped FerruleSand abrasion has caused the inscriptions to be unreadable. Part inscription is Patstop cock, water service

From the collection of Ken YoungWas a very important method of communication from approximately 1910 onwards. Morse Code was used by the Armed Forces up till 1960Brass base plate with two coils attached by a metal bar screwed down with a cross bar. The silver metal bar has two brass screws, one of which moves the bar to tap on the brass frame beneath it to emit the signalcommunication, telegraphic

Cask or keg bung (spigot) used for tapping the barrel.Reid Bros./Melbournefood technology, brewing

The Hydro mixer was attached to the kitchen tap which drove the mixing paddles.Mostly made of cast iron covered with green enamel. Its base is a 20 centimetre diameter and two centimetres high and shaped to hold a bowl, there is a protrusion eight centimetres long, four centimetres wide and nine centimetres high. A hinged section is attached to the protrusion of the base, it's a curved oval shape that's four centimetres by three centimetres at its base and tappers to four centimetres by two centimetres at the top, it then widens to an eleven centimetre diameter and three centimetres high shape that is parallel to the base, the centre of it is above the centre of the base. There is a removable eleven centimetre diameter plate screwed to the top. A two centimetre diameter 60 centimetre long plastic hose with a brass fitting on the end that is flared to four centimetres is attached to the side of the circular top. A one centimetre diameter metal tube is attached underneath that has two beaters on the end of it.HYDRO MIXER PAT APP FORfood preparation, hydro mixer

Nickel plated skim milk and cream separator. Splits into six pieces; some pieces are believed to be missing. Two pieces are cylindrical and have long spouts that curve downwards at the ends. Conical shaped piece which goes in centre and has hole through the middle (This piece has removable brass screw). Long straight rod with wooden handle and small, threaded section at other end. Rounded, circular rubber band, probably used as seal. Large round pot with thin flanged rim, seated on raised base edges. Tap with fitting on one side. Round piece with three evenly spaced legs. both sides slightly domed - fits into upper separator piece.On the brass nut of the conical shaped piece is engraved "unscrew" with an arrow adjacent. "10516-C" with another arrow and oval shaped trademark with lines inside. Embossed on the external casing of the conical piece is "2".food technology, dairying, milk, cream, dairy, separator, nickel, steel.

The owner of this hat, Chris Hayden was from Beechworth and Graduated from Duntroon in 1988 Hat Service Dress Royal Military College Duntroon student; Navy blue with red piping around the top edge; red woolen material round the side of the hat; decorative black vinyl chin strap around the front and above the peak made of black patent leather fastened on the each side by by small brass button that bears the college's emblem; positioned in the middle of the hat half on the red band and half on the crown of the hat is affixed the Royal Military College Duntroon hat badge; the underside of the peak the leather peak is dyed green and the inside rim is in brown vinyl join at the back by cotton ribbonOn a black diamond manufacturer's label/ All Wool/ Made in Hong Kong/ Christies/ 248 Pit St, / Sydney / Tel: (02) 264 6751 / on square piece of white tap. is the hat size 6 3/4 / on the in plastic water proof liner is written in black marking pen, HAYDEN

The main component of the nitrous oxide gasometer is a reflective white metal urn-shaped chamber from which an outlet valve and circular moulded tap allows for the flow of gas. A rectangular frame sits atop the chamber and comprises ornately decorated metal flourishes and three white metal anchoring pipes, two attached to each side of the chamber and one attached to the centre of the two-tiered, domed lid. The gasometer sits atop a Y-shaped cast iron stand, ornately decorated with metallic golden brass paint, with a circular base. There is also a black cast iron ring that is attached to the stand. Manufactured by Buffalo Dental Manufacturing Company, Buffalo NY.Inscription on base. "B.D.M. CO, BUFFALO N.Y." Inscription on vertical. "1 2 3" Inscription on upper side of top ring. "J. DEMAREST//PAT.FEB.15.1876." Inscription on lower side of top ring. "15"gasometer, nitrous oxide, storage, anaesthesia, dentistry, chloroform, ether, b.d.m. co