Two small packets of ten 'Turf' cork tipped vitgonia cigarettes in original cellophane wrapped packs. Red packs with cream text and graphic of Pegasus horse head and wings and foreleg framed in a dark blue circle.On front, back and sides - 'Turf' Virginia Cigarettes|On end panel - 10 Turf cork tipped.| on one side - Carreras Ltd, Arcadia Works Melbourne Australia(5 0Over a Circle)personal effects, smoking accessories

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

Chemists sold bottles of 'Dexsal'. This bottle was bought locally or at a larger store on a shopping expedition. This bottle is dated earlier than others and had a cork stopper. History of Dexsal.Historical: Change of bottles - shape, glass, stopper, use and embossing Aesthetic: Display showing embossing and shape.Clear brown glass 'Dexsal' bottle with straight sides a little more than three quarters of the way up. The base has 2 long sides (front and back) with 3 equal length sides at each end. The shoulder of the bottle has a short neck on top and then a cork stopper opening. Heavy embossing on the front and embossing on the base.Front: across bottle: 'Dexsal / Reg. Trade Mark' Base: 'F 397' and near the edge '627'chemist, dexsal, cork stopper, brown glass bottle

1 x small square cigarette tin with mainly red hinged lid 1 x larger rectangular cigarette tin with mainly red hinged lidCraven A Cork-tipped Virginia Cigarettessmoking, cigarettes, craven a

The Cork Oak. "Burnley 05."cork oak, burnley

Lifebuoy is from the ketch Reginald M, built in Port Adelaide by John Murch in 1922. Lifebuoys were part of the emergency lifesaving equipment carried on vessels in the late 19th and early 20th century. The ring was made of strips of cork wood joined together to make the ring shape then covered in canvas and sealed usually with white paint. Four evenly spaced canvas reinforcing bands would be added for strength and for a place to thread a rope or line. A lifebuoy, or life-preserver, is used as a buoyancy device often thrown to an endangered or distressed person in the water to keep them afloat while they receive help. It is usually connected by a rope to a person in a safe area such a nearby vessel or on shore. Lifebuoys is a made from a buoyant materials such as cork or foam and ae usually covered with canvas for protection and to make it easy to grip. The first use of life saving devices in recent centuries was by the Nordic people, who used light weight wood or cork blocks to keep afloat. Cork lifebuoys were used from the late 19th to early 20th century. Kapok fibre was then used as a filling for buoys but wasn’t entirely successful. Light weight balsa wood was used as a filler after WW1. In 1928 Peter Markus invented and patented the first inflatable life-preserver. By WW2 foam was combined with Kapok. Laws were passed over time that has required aeroplanes and water going-vessels to carry life-preservers on board. The Reginald M 1922- The two-masted coastal trading ketch Reginald M was built by John (Jack) Murch in Port Adelaide, South Australia, in 1922 and it was launched there in Largs Bay in the same year. It is thought that the keel was hewn from two telegraph poles - its owner was a regular visitor to salvage yards. Its cargo at times included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. At one time the vessel was used as a customs boat, renamed 'HMC No. 3, Pt Adelaide'. In 1969 she was used by a mining and railway company as a barge to carry explosives. In 1972 the vessel was renamed 'T.S. Macquarie' and planned to be used for sea cadet training.; this did not eventuate. It was sold again and went to Melbourne to be used for pleasure sailing, and again sold for use as a ferry. Late in 1975 Flagstaff Hill purchased the vessel to be used as an exhibit at the Maritime Village where many visitors enjoyed being able to board and explore a real ship with a long history. Sadly, in late 2016, the decision was made to 'decommission' the vessel due to the continuing high cost of maintenance and the risk to public safety. Many of the components of the vessel are held as part of Flagstaff Hill's collection.The lifebuoy is an example of equipment carried on vessels in the late 19th and early 20th century to help preserve life. There were many lives lost in Australia’s colonial period, particularly along the coast of South West Victoria. The lifebuoy is significant for its connection with the Australian built, 1922 coastal trader, Reginald M. Lifebuoy, round , cork, filled, white canvas cover with four red tabs. Text is printed in black on quarters 1 and 3. This lifebuoy once belonged to the vessel 'Reginald M' , Pt Adelaide. "REGINALD M / Pt ADELAIDE".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lifebuoy, lifesaving, ship equipment, reginald m, life rings, safety ring, life-saving buoy, ring buoy, life preserver, personal floating device, floatation device, safety equipment, coastal trader, john murch, reg webb

Black & White cigarettes were produced in England, Virginia Tobacco, or Flue-cured tobacco, is named after the US state where it was first cultivated. It is also called ‘bright tobacco’ because of the yellow to orange colour it achieves during curing. It grows particularly well in subtropical regions with light rainfall, such as Georgia, Florida and the Carolinas in the USA, Southern Brazil and Zimbabwe. In Australia, blends are predominantly Virginia, for example, Dunhill and Winfield. Virginia blends contain only flue-cured Virginia tobacco A tin with a hinged lid for 'Black & White' Cigarettes. a black silhouette of a man in a top hat is the trade mark BLACK & WHITE / 'MARKOVITCH' / VIRGINIA / CORK TIPPEDcigarettes, tobacco, cheltenham, moorabbin, bentleigh, early settlers

Rectangular red cigarette box with gold and black text and gold State Express Cigarettes logo. Top and bottom folding-flap opening.333 Cork tipped. Absolutely unique in their quality.ardath, tobacco, imperial tobacco, british american tobacco

From Box Hill Historical SocietySmokingEmpty cigarette box red coloured with dark blue and cream strip across left hand top corner. Drawing of a man wearing a large hat in cream egg shaped frame on right hand side. same illustrated on back.Marquis Exclusive Blend. Marquis Cork Tipped.personal effects, smoking accessories

enamel, with cork and webbingequipment, korea, army

Recovered from the beach at Apollo Bay from the wreck of the ss Casino in July 1932Cork Life Preseverss Casino, Port Fairy, BKNS flag, Australian Flag

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

Craven "A" is a brand of cigarette that exhibits the English-style flavour of a Virginia-tobacco dominant blend, with that plant's attendant nutty sweetness. The cigarette was named after the third Earl of Craven in 1860. Craven A's were a favourite cigarette during World War II. The 'plain' version of the cigarette was unusual in that, there was at one end a cork tip in place of the paper. The Craven A brand is owned by Rothmans, Benson & Hedges Inc (RBH), which also owns or otherwise controls a wide variety of cigarette brands. It was sold by the Carreras Tobacco Company in the United Kingdom.. A tin with hinged lid for 'Craven A' CigarettesTop Lid : CORK 'cat figure' TIPPED / CRAVEN/ A / VIRGINIA / CIGARETTES / MADE IN LONDON ENGLAND/ TRADE MARK Inside lid - Made specially to prevent sore throats / CRAVEN 'A' / CORK TIPPED CIGARETTES / are made from the finest imported / matured Virginia and other choice / tobaccos guaranteed pure and / absolutely free from any adulteration / of any kind. / CARRERA'S LIMITED / (Est. 1788) / ARCADIA WORKS LONDON ENGLANDcigarettes, tobacco, morrabbin, cheltenham, bentleigh, early settlers, craven a, filter tipped cigarettes, cork tipped cigarettes, wd & h.o.wills pty. ltd., british american tobacco co.pty.ltd., craven a cigarettes, carrera’s tobacco company, rothmans pty ltd., , benson and hedges pty ltd.,

Share certificate for twelve syndicate shares (= 1/12th share in Bryants Gully Gold Mining Company ) purchased by Samuel Lewers, 16th August 1899. Signed A.M. Barry and A.J. N. Horan, who were the "Applicants for Lease". According to an undated inscription on the back of the certificate, half of the shares were later transferred by Samuel Lewers to A.C. Cork.Blue paper share certificate, blue typescript, black ink handwriting, perforations on left side suggests certificate was detached from a book of share certificate forms.Text, front: " Bryant's Gully Gold Mining Coy., near Linton / 5 IN Twelve SYNDICATE SHARES. Text, reverse: "I hereby transfer one half (1/2) of the within share to A.O. Cork for value received S. Lewers".samuel lewers, a.c.cork, a.m. barry, a. j. n. horan, bryant's gully gold mining company, share certificates

UnknownEmpty Craven 'A' Virginia Cigarette tin containing various uniform buttons.Cork Tipped Craven 'A' Virginia Cigarettes. 50 Cigarettes.

Rotted Cork in lid HoleM559 M

Small cork stoppered bottle.oil of cloves, lewis & o'donnell chemists

Hof Pottery was established in 1971 in Fremantle, Western Australia by German born Helmut Hof and Australian born Elizabeth Hof. They set up a commercial pottery business in a small converted house in Naval Base, south of Fremantle. They later built a factory on the site and employed a team of people to make a wide range of slip cast wares. These were sold through retail garden centres and large department stores. The business name was deregistered in 2003. Work may be marked with an incised 'Hof' and/or have a paper label reading 'Hof Pottery made in Australia'.Ceramic vessel with cork lid incised 'Hof'ceramics, hoff, australian studio pottery

The donor of the item believes that the demijohn belonged to her grandmother Jean Goldie. The Goldie family owned and operated a grocery business in Port Fairy, Victoria.An interesting item that gives insight into the type of multi use ceramic container that would have been refilled by the grocers when people were purchasing liquids, e.g. vinegar.Ceramic demijohn with cork stopper.POWELL, ORR & GOLDIE PPY. LD. PORT FAIRY- 1stoneware, demijohn, bottle, goldie, orr, storage

Robert GORDON Robert 'Andy' Gordon is a potter supplying ceramic wares to stores across Australia as well as exporting to Canada, the U.S.A. and New Zealand. to China. Robert and his wife Barbara started making pottery in 1979 in a tin shed at Gembrook in the Dandenongs, Victoria, which they called the Pack Track Pottery, selling their wares at the St Kilda markets. In 1987, they expanded to purpose-build premises in nearby Pakenham where they are still based today. Wares made at Pack Track Pottery are painted 'Robert Gordon' or 'Gordon' in oxide. Wares made at the Robert Gordon Pottery are stamped 'Robert Gordon Pottery Australia', 'Robert Gordon Pottery Australian Made' or 'Robert Gordon Australia'. Glazed jug with cork stopperrobert gordon, australia studio pottery, ceramics, pack tack pottery, jug

This lifebuoy bears the name of the ship, its origin, the shipping company and the red ensign. These details mean that the lifebuoy was part of the lifesaving equipment on the sailing ship the Loch Ness, part of the Glasgow Shipping Company’s Loch Line (G.S.C. on the red pennant) and a British-registered ship (the red flag with the Union Jack on it). Lifebuoys were part of the emergency lifesaving equipment carried on vessels in the late 19th and early 20th century. The ring was made of strips of cork wood joined together to make the ring shape then covered in canvas and sealed usually with white paint. Four evenly spaced canvas reinforcing bands would be added for strength and for a place to thread a rope or line. A lifebuoy, or life-preserver, is used as a buoyancy device often thrown to an endangered or distressed person in the water to keep them afloat while they receive help. It is usually connected by a rope to a person in a safe area such a nearby vessel or on shore. Lifebuoys is a made from a buoyant materials such as cork or foam and ae usually covered with canvas for protection and to make it easy to grip. The first use of life saving devices in recent centuries was by the Nordic people, who used light weight wood or cork blocks to keep afloat. Cork lifebuoys were used from the late 19th to early 20th century. Kapok fibre was then used as a filling for buoys but wasn’t entirely successful. Light weight balsa wood was used as a filler after WW1. In 1928 Peter Markus invented and patented the first inflatable life-preserver. By WW2 foam was combined with Kapok. Laws were passed over time that has required aeroplanes and water going-vessels to carry life-preservers on board. The ship LOCH NESS 1869-1922 … The ship Loch Ness, of Glasgow, was the same ship what William Carmichael sailed on to Australia when he laid the commemoration stone on behalf of his sister Eva and himself, dedicated to their parents, brothers and sisters. The family members lost their lives on June 1, 1878, when their ship, the Loch Ard, was wrecked at Mutton Bird Island in south west Victoria. Eva Carmichael was one of the two survivors from that shipwreck, the other 52 tragically lost their lives. The ship Loch Ness was a three-masted sailing ship built in 1869 for the Loch Line owned by the Glasgow Shipping Company. The line transported cargo and passengers from Glasgow, Scotland, to Australian ports. The Loch Ness was sold in 1908 to Stevedore & Shipping Co, Sydney for use as a coal hulk. In 1914 the Australian Government took over the ship for naval defence purposeless. In 1926 the ship was sunk during gunfire practice by HMAS Melbourne, near Fremantle, Western Australia. The lifebuoy is an example of equipment carried on vessels in the late 19th and early 20th century to help preserve life. There were many lives lost in Australia’s colonial period, particularly along the coast of South West Victoria. The lifebuoy is significant for its connection to the ship Loch Ness on which William Carmichael, brother of Eva Carmichael, travelled to lay a memorial to their parents and all of their other siblings who lost their lives in the Loch Ard disaster of 1878 near Peterborough, Victoria. Lifebuoy, round, cork filling inside canvas cover, painted white, with rope attached. Lifebuoy has printed name of vessel Loch Ness, Glasgow. Symbols of red flag with white initials G S Co. There is also a red ensign."LOCH NESS", "GLASGOW" "G S Co"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, loch ness, loch ard, william carmichael, eva carmichael, lifebuoy, glasgow sailing ship, loch ness of glasgow, life rings, safety ring, life-saving buoy, ring buoy, life preserver, personal floating device, floatation device, safety equipment, g s c, glasgow shipping company