Showing 42 items
matching gas lights
-
Royal Australasian College of Surgeons Museum and Archives
Tool - LIster's Carbolic Spray, circa 1930's
... chloroform, the gas lights decomposed the vapour into chlorine gas ...The College’s spray was one of the first pieces of surgical memorabilia to come into the possession of the College. It had been used in the Listerian wards of the Glasgow Royal Infirmary, and was presented , along with some other artefacts, by James Hogarth Pringle in 1930. Joseph Lister (1827-1912) is known as a father of modern surgery. His methods of preventing infection were controversial in their time, but are today recognized as a major advance in the practice of surgery. Lister’s life and achievements are too well known to be recounted here. The definitive biography was written by his nephew, Sir Rickman Godlee (PRCSE 1911-13), and published in 1917. Douglas Guthrie gives an glimpse of Lister at work: “...He never wore a white gown and frequently did not even remove his coat, but simply rolled back his sleeves and turned up his coat collar to protect his starched collar from the cloud of carbolic spray in which he operated...” From advances in bacteriology, and discoveries by Robert Koch and others, it became increasingly evident that airborne bacteria were not a significant contributor to sepsis in surgical wounds. They also demonstrated that the body had its own defences against invading organisms, which were seriously compromised by the effects of the carbolic spray. Gradually the use of the spray was curtailed, Lister himself finally abandoning it in 1887. Lister performed the first antiseptic operation, the dressing and splintage of a compound fracture of the lower leg, in 1865. At this time he used carbolic solution by application, and dressings soaked in the solution. The spray was developed later, after many different methods, including carbolic and linseed oil putty, had been tried in order to reduce the harmful side-effects of undiluted carbolic acid. The steam spray was developed in 1869, and announced to the medical world in 1871. Lister’s purpose in adopting the spray was to kill airborne bacteria in the vicinity of the operation before they could reach the patient. It came to be used all over the world for many years. However, it had serious disadvantages, which even Lister acknowledged. The principal problem was the inhalation of carbolic vapour by everyone in the vicinity, including the patient and the operator. In addition, if the patient had been anæsthetized using chloroform, the gas lights decomposed the vapour into chlorine gas, making any procedure an ordeal of endurance.The spray consists of a steam boiler heated by a wick, a nozzle for the steam to escape, and a glass jar for the carbolic solution. Fuel for the wick is carried in a tank at the base. Valves regulate the pressure of the steam, and the nozzle is adjustable. The boiler is made of cast iron, the fittings are brass, and the handles are of wood. Empty, the apparatus weighs 8 lbs (3.2 kg). lister, carbolic spray, antiseptic -
Peterborough History Group
Newspaper - Battle to drag oil rig away from reef
Demonstrates that gas and oil exploration has been occurring for at least 50 years. This records an incident involving an oil rig becoming detached and drifting on the rocks near Peterborough.Significant as it records an incident involving an oil rig becoming detached and drifting on the rocks near Peterborough. This was quite an event, and an eyewitness recalls how high and startlingly close the lights of the drifting rig appeared to be to the town. In daylight the rescue of the rig was an entertainment for the residents and holidaymakers.Photocopy of a two column article about an incident involving an oil rig.peterborough, oil rigs, marine rescue -
Ballarat Tramway Museum
Photograph - Colour Photograph/s, late 1960's or early 1970's
Colour photograph of Ballarat SEC No. 37 standing in the City Loop during the late 1960's or early 1970's. Tram has lights on, showing destination of 'Bell St' and one "Everything's under control in my all electric kitchen" roof advertisement board. In the background are buildings on the south side of Sturt St. including Patersons and the Ballarat Gas Company. On Kodak paper.city loop, sturt st, tram 37 -
Ballarat Tramway Museum
Photograph - B&W print of donated negative, John Webster, 21/08/1955 12:00:00 AM
Yields information about the appearance of the appearance of the Bar Traffic light at the corner of Ryrie and Moorabool Streets and two trams in the backgroundBlack and white digital print from scan of a donated negative showing trams 17 and 10 in Ryrie St at the corner with Moorabool Street. Has the National Mutual Life Association and Geelong Gas Co. buildings and the ANZ Bank in the background and a number of cars in the street. Shows in detail the traffic bar lights and overhead pole and bracket arm details at the intersection. Assumed photo taken on the same day as the others - 21-8-1955. Black and White prints made from scan of negative. Original Negative stored with Negatives. Negative scanned at hi res 4/6/2020 and image updated.On left hand side of the negatives in ink is "EI 13"tramways, trams, geelong, tram stops, ryrie st, traffic lights, overhead, tram 17, tram 10 -
Ballarat Tramway Museum
Negative, Wal Jack, late 1960
Yields information about Ballarat tram No. 25 with signs for the Made In Australia week during 1958.Negative and Digital images of the Wal Jack Ballarat Negative file of tram 33 in the City Loop, late 1960 in the process of being fitted with dash canopy lights. The tram has the destination of CITY and has a briquettes advert on the front panel. In the background is the Patersons store, the Ballaarat Gas Co. building, Hartley Sports Centre and Gribbles Chemist. trams, tramways, city loop, sturt st, tram 33 -
Freemasons Victoria - Gordon Lodge, 99
Original Gordon Lodge lodge-room 1886
A picture of the original Gordon Lodge lodge-room of 1886 - room currently in use by the Lodge's artist-in-residence. Below is a newspaper article from the North Melbourne Advertiser (Vic: 1873 - 1894) for Friday 22 April 1887 that describes the architecture of the building at the time of its completion. From some of the details included in the article it is obvious that the journalist who wrote the article was a Freemason. THE MASONIC HALL ASCOT VALE North Melbourne Advertiser (Vic. : 1873 - 1894) Friday 22 April 1887 THE MASONIC HALL ASCOT VALE The now Masonic Hall, Ascot Vale, the foundation stone of which was laid by the Worshipful Master of the Gordon Lodge (Bro, W. F. Lamonby) in October last has just been completed, and will be formally opened: with grand Masonic ball on the 13th prox. The hall stands on a fine block of land having a frontage of 50ft to the Maribyrnong road by a depth of 130 ft., and is built of brick and cement on a most substantial foundation of bluestone. The Tuscan style of architecture has been adopted with the most successful result, and the front design which is especially handsome, includes four massive pilasters with frieze architrave and enriched cornice, forming the entablature of the order,- and giving a most imposing appearance. The front door, over which are the masonic emblems, is seven feet wide, and two escape doors made to open outwards in compliance with the Central Board of Health regulations are also provided, in case of emergency. In the vestibule is a very fine elliptic arch with keystone enriched with fruit, and the whole floor, 9ft. 6in. wide, is laid with Cawkwell's encaustic tyles. On the right, of tile vestibule is a commodious committee room 22ft. by 12ft 6in with side entrance for members, so that in case the main hall is engaged no inconvenience need be caused. On the left is the Secretary's room, and off this again is a staircase cellar. The vestibule is well lighted with two exceedingly pretty chandeliers, which have a very pleasing effect and give it a nice bright appearance ascending a handsome staircase leading from the vestibule the upper storey is reached, and here everything is splendidly arranged, especially 'the Lodge Room, which is a model of neatness and of comfort. The dimensions are 28ft. x 22ft 6in. with an elevation of 17ft. 6in. to the beautiful cove ceiling, which is quite a work of art. At the east end of the room on a raised dais is the master's chair with the masonic emblems, and neat forms of polished kauri are placed at the sides for members, about 150 of whom can be accommodated. The lighting and ventilation have both been well attended to and all is very complete. The main hall is 75ft. by 35 ft. with a stage 15ft. deep, leaving the auditorium 60ft. x 35ft. with a seating capacity about 600. Round the walls up to 6ft 6in. is a handsome dado in Portland cement and above it are panelled Tuscan pilasters to the entablature, architrave enriched frieze and medallion cornice forming the main cornice to the hall. Immediately inside the cornice is a sunken panel all-round the ceiling relieved with ornamental outlet ventilators. There are twelve large windows, six on each aide, and the sashes, skirting boards, and doors throughout the building are beautifully painted in imitation of grained cedar. Two enormous gas reflectors, each for 50 lights are suspended from the ceiling and besides these, four elegant hanging chandeliers for lighting up the proscenium, and back of the stage, under which is a storeroom for seats, &c, when the hall is required for a ball. The floor is made of kauri, secretly nailed, and is beautifully finished off. At the back of the stage are two lavatories and ladies and gentlemen's dressing rooms, between which are a connecting passage for a call boy. Outside is a capital asphalted yard, and the other usual conveniences on an improved plan. There is a right-of-way asphalted on each side of the building, and a large lamp is to be placed opposite the main entrance to light up the front. Everything that forethought and ability could suggest to make the hall comfortable and popular has been done, and it now only remains for the public to avail themselves of the advantages offered them by the enterprising Company. The cost of the building and furniture, including a magnificent piano, was £2,500, and the land £300. Mr J. C. M. Cowan, of Ascot Vale, is the architect, and Messrs Parker and Pater, of South Melbourne, the contractors. The plastering was done by Mr I Nicholas, of Murray Street, Moonee Ponds, who is also entitled to great praise for his splendid workmanship. Mr Cowan has been most assiduous and particular in seeing that his instructions were carried out to his satisfaction, and the result must be exceedingly gratifying to him and to the directors. The Masonic hall is only one of the many buildings erected by Mr Cowan in this district, among the others being the well known residences of Meessrs. J. Levy, Mooneo Street; W. Murphy, Eglington street; G. Groube, Maribyrnong street; C. A. Arvier, Moonee Ponds ; and F. Paul, Mount Alexander road. It may also be mentioned that Mr Cowan generously presented the plans for the now local fire brigade tower which is acknowledged to be one of the strongest and most graceful around Melbourne, The new Masonic Hall does infinite credit to the borough, and in accommodation, design, and comfort it is not surpassed by any similar building of the kind outside the city. -
Wodonga & District Historical Society Inc
Photograph - Mylon's Reo Gas-powered bus, 1940s
This 1941 Reo bus was owned by the Mylon Bus Company in Wodonga. The gas bag was used for fuel to compensate for the shortage of petrol during World War II. The Reo, powered by gas, could run 40 miles on 1,100 cubic feet. Albury and Wodonga Councils pruned back the trees so the bus could pull into the kerbs without tearing the gas bag, and the Albury Council put in a special gas pipeline to the corner of David Street where the bag could be refilled. Street lights could also cause a problem for the bag's safety. The driver in this image is Alf Jackson pictured with the Mylon boys, Phillip, David and Bernie. In 1906 Patrick Mylon started a passenger transport service in the Albury-Wodonga border area with horses and cabs. His son Jack went into business in the late 1920s, and his grandson Bernie joined the firm early in 1970. When Patrick started with the horses and cabs, each cab carried eight passengers and he always had two horses per cab. As the business expanded, Mylons used a range of buses and coaches including Reo, Chev and Bedford vehicles. During more than 100 years of service to the Wodonga region and beyond, Mylon Motorways received many awards for Excellence and Tourism. On 2nd July 2008 the company, including its 31 buses and 45 staff members, were transferred to the Dyson Group.This image is significant because it captures innovations made to cope with fuel scarcity during World War II and represents an important Wodonga business.A black and white image of a Reo gas-powered bus owned by Mylon Bus Lines Wodonga. The driver and a group of boys are standing beside the bus.mylon motorways, patrick mylon, wodonga transport -
Ballarat Tramway Museum
Photograph - Tram 35 Lydiard St Nth reversing, late 1950s
The photograph shows SEC Ballarat tram No. 35 reversing at the Lydiard St North x-over opposite the Post Office. The driver is preparing to lift the trolley pole, while the conductor is standing alongside the tram. The tram has the destination of City and has been fitted with tail lights and large reflective triangles - from 1956 to 1960. In the background are the Post Office and the Ballarat Mining Exchange building fitted with Mobil gas petrol bowsers. Photographer and date unknown.Yields information about tram 35 reversing at the Lydiard St Nth crossover opposite the Post Office - late 1950s.Black and white print on plain papertramcars, tram 35, lydiard st nth, city, mining exchange, post office -
Ballarat Tramway Museum
Photograph - Tram 33 lower Sturt St, mid 1950s
The photograph shows SEC Ballarat tram No. 33 (Gardens via Drummond St North) in lower Sturt St mid 1950s with tail lights installed. In the background is the Ballaarat Gas Co. building, Patersons, a hotel and the Ballarat Mechanics Institute Building with signs for Robur Tea and Davies Bread. Photographer unknown.Yields information about tram 33 and lower Sturt St mid 1950s.Black and white print with plain back.tramcars, tram 33, sturt st -
Bendigo Historical Society Inc.
Vehicle - CARBIDE VEHICLE LAMP: PANTHER BIRMINGHAM
The Panther lamp was made by Powell and Hanmer of Birmingham. (see Item 7354) This model appears to be dated from the 1920's. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights.Carbide Vehicle Lamp.-Silvered Metal, Lens Assembly . Small Green lens on both sides of the assembly, with a clear lens in front. 'Panther B'Ham' is stamped on the lower part of the assembly. In addition a Logo is Stamped with 'P H' and 'Ltd' under those letters. Carbide Gas section missing.Panther B'Ham -
Melbourne Tram Museum
Postcard, Rose Stereograph Co, "Swanston Street Melbourne", early 1940s
Rose Series postcard No. P 1633, titled "Swanston Street Melbourne", looking north from about Flinders Lane. There are a number of W2's in the street with white painted panels under the driver's windows, and one car with a gas producer back. A set of traffic lights can be seen on both sides of Flinders Lane.Yields information about Flinders St station early 1940s.Postcard - printed real photograph with Rose Stereograph Co. name on the rear.tramways, trams, w2 class, swanston st, world war ii -
Bendigo Historical Society Inc.
Vehicle - BICYCLE LIGHT
Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights.Acetylene bicycle light carbide. Green and red side lens. 200 cm High. Inscription Powell & Hanmer Birmingham. Previous Catalogue Number 112.lighting, accessories, bicycle light