An unsealed Spalding (U.S.) 'Heavy Duty' domed-top tennis ball can with lid. Key and seal strip lost. Contains 2 of the 3 original balls. Materials: Metal, Ink, Rubber, Synthetic material, Wooltennis

These six photographs of Printer Technicians using a heavy-duty guillotine to trim bulk printed map stock were probably taken circa 1960s to 1980s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. Personnel are not identified on Photos .3P and .4P, however names are annotated on photos .1P, .2P, .4P and .5P. Cartographers normally provided trim marks to specified map dimensions as guidance to the printer. The trimming stage, like all the other printing processes required high levels of accuracy. These guillotines were extremely powerful to cut through bulk quantities of printed maps, as evident in photos .1P .3P, .4P and .6P.This is a set of photographs of Printer Technicians using a heavy-duty guillotine to trim bulk printed map stock c1960s to 1980s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1960s, L to R: ‘Wanger’ Payne, unidentified, Lithographic Squadron .2) - Photo, black & white, c1980s, CPL Ken Cavanagh, Lithographic Squadron .3) - Photo, black & white, c1970s, unidentified, Lithographic Squadron .4) - Photo, colour, c1970s, Peter Saunders, Lithographic Squadron .5) - Photo, black & white, c1980s, L to R: unidentified, WO1 Noel ‘Nesty’ Coulthard, Lithographic Squadron .6) - Photo, black & white, c1980s, unidentified, Lithographic Squadron.1P, .2P, .4P and .5P. personnel annotation on back. * unidentified on .1P due to poor writing. .3P and .6P – no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho, printing

Heavy duty hex wheel wrench, losely tied to a piece of flat steel with several turns of steel wire (perhaps for strengthening). Handle Offset 22cm deep by 14cm wide. Flat steel base is warped and has three holes

Item issued to Frank Levy (Major) served pre WW1 and AIF in the Light Horse and Artillery. Refer Cat No 1924.2 for his service history.Horse Nose Bag made from heavy duty canvas, round shape, has 8 holes via metal studs. The bag has one strap combining a canvas section sewn to a heavy leather belt adjustable on the one end."F LEVY"transport - horse, military history, trades - leatherworking

Heavy Duty Rake, with attachment to 2.5cm waterpipe fitting. 8 steel prongs are fitted with a flat steel scraper (50 x 8cm x 3mm) at the end, held in place with two steel clamps and two hex bolts and nut each

This is a heavy duty chamber pot and may have been produced for use in a hospital or ship. This item has no known local provenance and is retained for display as an interesting memento of the past.This is a white china bowl, round in shape, with an overhanging top. Inserted in a groove in the top is a lid which has a white decorative pattern around the outer rim. There is a round handle in the middle of the lid in a recessed section. There is also a metal handle for carrying the bowl and the lid together. There is some staininghousehold items, history of warrnambool

The bag is a clear plastic with a zip lock top. It is a heavy duty plastic. Instructions for use are printed on the outside. There are two strips of water sterilizing tablets. 10 pills each. There are also two "books" of army matches. Red cover with a crown over two swords and a leaping kangaroo. survival, water, purification

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal clamping tool, possibly associated with bone surgery. The instrument has a heavy-duty clamp style head at one end, and a bolt with a butterfly screw at the other end for locking the clamp in place. The handles of the tool are engraved with the text 'MAYER &/MELTZER' on one handle, and 'LONDON' on the other.'MEYER &/MELTZER' 'LONDON'surgery

Two Sands & McDougall heavy duty folders. Brown textured surface, heavy card covers with metal clips inside. "Shire of Mirboo" label inside front cover with typed "Prayer to Open Council Meeting". Sands & McDougall No.551. Texta numbers on spine 21 & 23.

Two oval-shaped pieces of cardboard, tied together with red cord at three points, advertising the new Dunlop 'All States' Heavy Duty tennis ball - one of which is actually positioned into a hole, through the middle of the advertisement. Materials: Rubber, Felt, Ink, Cardboard, Cordtennis

A rare example of a Type D Survival Knife issued to British RAF during the latter part of WWII.Heavy duty survival knife with single edged oval shaped broad blade and wooden handle contoured for grip. Two large screws secure the grips. The pommel end has a wrist cord hole (cord not present). See also item 2020.000034-2 (leather sheath). Blunt end of blade near grip there is engraved '27C/2360', reverse side is the makers mark 'Rodgers Sheffield England'.british airforce, survival knife, ww2, wwii, type d

A tyre bender is used to bend and shape metal rims for wooden wagon wheels. This tyre bender’s model first appeared in the Day Bros catalogue in 1884 as the “Giant” model. The catalogue of 1883 only showed a lighter duty model called the “Lion”. It can be assumed that this later “Giant” model was a heavy duty improvement over the 1883 "Lion" and other smaller models which were still being advertised for sale in 1884. The Day Bros foundry, makers of this tyre bender, was operating as the manufacture of wheel right and blacksmith tools and general machinery in the 19th century in the USA and successfully exported their goods all over the world. Wagon tyre benders would have been very common circa 1850-1920, so there were probably many makers over the years. Early on, it would have become clear to the blacksmiths about which designs worked best so, eventually, the various makers would have made similar products to each other. This tyre bender was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The tyre bender is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The machine or tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Steel tyre bender mounted on timber base, used for wagon wheel steel rims. Made from cast iron and steel, double geared with four cogs to unite the upper and lower steel rollers. There are adjustable guide collars to keep the iron in line while it is being bent. It can also be used with two cranks for heavy duty work utilising the use to two operators. It is the Giant model, made in 1884 by Day Bros. of Philadelphia. This tyre bender once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria. “DAY BROS. PHILAP. PA” cast into the side of machineflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, machinery, wagon wheel, wheelwrights, blacksmith, steel rim wheels, tyre bender, tire bender, the giant tyre bender, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, wagon tyre bender, day bros. philadelphia pennsylvania, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall

This padlock and key are heavy duty items but were probably used in households or businesses for locking sheds and outhouses. Padlocks used today are more lightweight.These items have no known local significance but are retained as examples of padlocks used in the past..1 This is an iron padlock with a ridged circular bolt which is now fused into the lock. .2 This is an iron key with a circular handle. It fits into the end of the base of the padlock. Both items are very rusted. antiquarian household items, warrnambool

Sgt Foster - Royal Signals - British Army. Refer to Cat 5337.2.1. This is a paper document in very poor condition. It is an Army form with habdwritten entries in blue ink. The discharge date is stamped 30 April 1946. 2, This is a brown heavy duty paper "Release Leave Certificate". British form X202/A for 911335 W/Sub Sgt Foster, Edgar James William Royal Signals.It is stamped with "Combined Operation Signals" stamp. Last place was at 13 ABPO India Command, date 11/3/46.british army, discharge certificate

Stand 18" tall Red lens front, white rear bracket on side for mounting on train. 1/4 wire handle. Made from heavy duty 16 gauge iron. Lift up lid on top to light with kerosene wick. Two round light lenses 13cm diam x 5cm diam

This is a book of 170 pages. The cover has a coloured sketch of a soldier on a grey background , two bomb sketches and some black printing. The spine is almost completely missing. The pages contain printed text, maps, sketches, black and white photographs and coloured illustrations. The book is bound with heavy duty staples. There are five loose newspaper cuttings.non-fictionAustralians in World War 1 world war 1, anzacs, australian humour

Part of hostess/stewardess uniform designed for Ansett Airlines of Australia 1969 to 1972. Donated to Sir Reginald Ansett Transport Museum. Complements the collection of air flight crew attire 1969 to 1972.Beige pillbox hat, with a flat crown and straight, upright sides.Turned brim, featuring peaked detail on one side. Piped edging. Heavy duty cotton fabric with reinforcing stitches. Fawn grosgrain ribbon interfacing inside. Cream Bem silk lining. Gold coloured badge features 1968-1981 Ansett logo: A Delta"Nivek Headware Reg. Melb" on label inside. Blue ink numeral 21 handwritten on label. Possibly size 21 inch hat.hostess, 1970's, flight attendants, ansett airlines of australia, stewardess, pillbox, 1969-1972, beige, nivek headwear

Donated by Shirley Boles, to Sir Reginald Ansett Transport Museum. Part of hostess/stewardess uniform designed for Ansett Airlines of Australia 1969 to 1972.Complements the collection of air flight crew attire 1969 to 1972.Beige pillbox hat, with a flat crown and straight, upright sides.Turned brim, featuring peaked detail on one side. Piped edging. Heavy duty poly-cotton fabric with reinforcing stitches. Fawn grosgrain ribbon interfacing inside. Cream Bem silk lining. Gold coloured badge features 1968-1981 Ansett logo: A Delta." by Nivek Headwear Reg. Melb" on label inside. Red ink numeral 21 handwritten on label. Possibly size 21 inch hat. Handwritten initial "SB" in red ink on manufacturer's label. Commercial name tag, labelled Shirley Boles hand sewn to Grosgrain ribbon.beige, hostess, 1970's, flight attendants, ansett airlines of australia, stewardess, pillbox, shirley boles, 1969-1972

This hat complements the stewardess uniform designed for Ansett Airlines of Australia between 1969 to 1972. It was donated by Shirley Boles, to Sir Reginald Ansett Transport Museum. Shirley Boles was an air hostess with ANA in the early days of Ansett. Shirley has made a considerable contribution of items to the Sir Reginald Ansett Transport Museum. She was a popular staff member who worked for many years with the company.Beige pillbox hat, with a flat crown and straight, upright sides.Turned up brim, featuring peaked detail on one side. Piped edging. Heavy duty cotton fabric with reinforcing stitches. Fawn grosgrain ribbon interfacing inside. Cream Bem silk lining. Gold coloured badge features 1968-1981 Ansett logo: A Delta" by Nivek Headwear Reg. Melb" on label inside. Red ink numeral 21 & 1/2 handwritten on label. Possibly size 21 inch hat. beige, hostess, 1970's, flight attendants, ansett airlines of australia, stewardess, pillbox, shirley boles, 1969-1972

Historical Information: The anchor is from the wooden sailing ship CHILDREN, which was wrecked at Childers Cove east of Warrnambool on the 15th of January 1839 with the loss of 16 lives. The Children anchor was raised from the wreck site by Flagstaff Hill Divers; Peter Ronald, Garry Hayden (Terang, still), Tim Goodall (now Warrnambool), and Colin Goodall (now Warrnambool), on Sunday 3rd January 1974. A week or so later it was dragged up the cliffs and taken to Warrnambool. It is now on display near the entrance to the Maritime Village and Museum. It appears to be a Pering’s Improved Anchor, developed at Portsmouth after 1813. The addition of broad curvature to the anchor arms provided a stronger purchase than the pre-existing Admiralty Old Pattern Long Shanked Anchor with straight arms. However, the evidence of hammer-welding the separate pieces of the arms and palms to the central shank (peaked crown and flat palms) suggests the manufacture is before the 1831 Rodger’s Anchor design, (which cast both arms and their flukes as one piece that was then attached to the shank by a bolt through the crown). This identification seems consistent with the date of the CHILDREN’s construction in 1824. The CHILDREN was a three masted barque with a wooden hull built at Liverpool in England. She was bought by the Henty family of Portland (Australia Felix) in 1837 for regular coastal trading between Van Diemens Land, the Port Phillip District of New South Wales and South Australia. Only 255 tons burden (92 feet in length, with a beam of 25 feet and depth of 17 feet), she sailed from Launceston bound for Adelaide in late December1838, on her first Australian voyage and under the English master who had brought her out – Captain H. Browne. On board the CHILDREN were 24 passengers, including 9 children; the captain and 14 crew; livestock of 1500 sheep, 8 bullocks and 7 horses; general cargo of beef, pork, tobacco, tripe, butter, limejuice, horse hair, currants, lead shot, beer and spirits; 5,000 house bricks from London; and six whaling boats with associated whaling gear. The vessel was battered by gale force north-westerly winds shortly after setting out from Launceston on 11 January 1839 and adverse sailing conditions persisted for the next four days. At 11 pm on the 15th of January 1839, and many miles north and east of the captain’s navigated position, the CHILDREN struck the Pinnacle, a limestone stack off Childers Cove. Within half an hour the ship was completely destroyed. As well as the loss of livestock and cargo, 16 passengers and crew perished, including the captain, six men, one woman and eight children. In 1931 shifting sands at Childers Cove uncovered the skeleton of an adult male. In 1951 another two skeletons were exposed by storms, an adult male and a child. In 1963 some district scuba divers retrieved a small signal-cannon from the site. And in 1974 Flagstaff Hill recovered the anchor and some house bricks. The shipwreck of the CHILDREN is of state significance – Victorian Heritage Register No. S116.A large forged-wrought iron anchor from the wreck of the CHILDREN. Flat hammer-welded flukes on opposing curved arms and a peaked crown. It has a metal (elbowed) stock or cross-bar and a heavy duty pinned shackle (not ring) for the anchor chain. It is in fair condition but extensively corroded after 135 years on seabed (supported on display) .warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, the children, childers cove, anchor, pering’s improved anchor, 1839 shipwreck.

This surgeon's gown was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. White, heavy duty cotton surgeon's gown, part of the W.R. Angus Collection. Gown hasshoulder button fastening. Both cuffs are well worn and fraying, also 'L' shaped tear on front right has been machine repaired. Remnants of label on inside collar with name "ANGUS". Also Maker's label, "PUKKA", made in Melbourne.Remnants of ‘ANGUS” on inside collar. Maker’s label “It’s a PUKKA” and “PUKKA DRILLS / TAILORED BY PERO MELBOURNE / UNSHRINKABLE” Label has "SIZE 42" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, surgeon's gown, surgical clothing, pukka, pukka drills, tailored by pero melbourne, melbourne taylor

The banner was donated to the Museum by the Post 1975 Veterans, Central Victoria. The Association has been renamed.Banner - soft heavy duty plastic with printed information. It has white print on a black background and three badges in colour. Possibly done by a laser printer. Left to Right: Royal Australian Navy - Queen's Crown over Anchor. The Australian Army - Queen's Crown with Rising Sun. Royal Australian Air Force - Queen's Crown with Wings. Printed information on banner: "Post 1975 VETERANS/ CENTRAL VICTORIA".banner, post 75 veterans, central victoria

Pill-box hat belonging to uniform designed for Customer Service Staff of Ansett Airlines of Australia between 1972-1977. Mustard coloured Pillbox Hat , with flat crown and straight, upright sides. Turned brim featuring peaked detail on one side. Piped edging. Heavy-duty poly-cotton (?) fabric with reinforcing stitching. Fawn grosgrain ribbon interfacing inside. Cream bemsilk lining. Maker's label appears to have been removed. Worn by Customer Service staff. Maker's label no longer on item. Highly similar to hat item 00008 manufactured by "Nivek Headwear Reg. Melb" customer service staff, mustard, pill-box hat, 1970s, ansett airlines

Donated to Sir Reginald Ansett Transport Museum by Shirley Boles Ansett Airlines of Australia 1969-1972 Uniform designed for Hostess/Stewardess uniform. Complements the collection of air flight crew attire 1969-1972.Shirley Boles was an air hostess with ANA in the early days of Ansett. Shirley has made a considerable contribution of items to the Sir Reginald Ansett Transport Museum. She was a popular staff member who worked for many years with the company.Beige coloured pillbox hat , with flat crown and straight, upright sides. Turned up brim featuring peaked detail on one side. Piped edging. Heavy-duty poly-cotton (?) fabric with reinforcing stitching. Fawn grosgrain ribbon interfacing inside. Cream bemsilk lining. Gold coloured badge features 1968-1981 Ansett Logo A Delta "by Nivek Headwear Reg. Melb" on label inside. Pencil numeral 20 & 1/2 hand written on label. Commercial Name Tag hand sown Shirley Boles customer service staff, pill-box hat, 1970s, beige, hostess, stewardess, shirley boles, flight attendants, 1969-1972

Part of the "Kevin John Herdman", No.397661 Collection. See Catalogue No. 5942P for details of his service record.Green coloured canvas bag closed with heavy duty plastic zipper. Two handles made from thick dark green canvas. Each is attached and reinforced with Khaki coloured stitching. A clear plastic pocket is sewn onto one side to house a name card. Below this is a pocket closed in a plastic zipper. On the inside of the bag are two large canvas pockets.Handwritten in black on outside above the clear plastic pocket "HERDMAN".equipment, kitbag, kevin john herdman

Peter Ball collection, refer Cat No 4704Army issue Great Coat khaki colour, outer lining heavy duty with green light inner lining, all gold colour buttons intact and have a crown and crossed rifles on, plastic brown buttons under collar one missing, large white label sewn in on with maker, date & personal details, white card label on LH side with coat size.On collar label in black print, “David Klein PTY LTD Victoria 1967 (arrow up) Size 7 Class 8405 - 66 - 012 - 0495”, hand written on in black, “3796117 BALL PC”.clothing, great coat, army issue

Heavy duty cardboard cylinder with one fixed and one removable end cap. There are cotton webbing straps attached for carrying the tube and for securing the removable end cap.Internally, there is a tapering inwards of the cardboard liner. Under the removable cap, is a ring shaped rubber protector. The outer layer of the cardboard tube has a cotton cloth cover which has been painted brown.The removable end cap is marked “C279 MK N2 1952 M/W”war, explosives, packaging

These 10 photographs were most likely taken in the 1990s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. In photos .1P to .2P the technicians are applying a UV-sensitive pigmented dye emulating one of the print colours to a white opaque polyester sheet mounted on a rotating table in a whirler. The coated sheet was dried before placement in a vacuum light frame beneath a stud registered map negative. They were then exposed to a carbon arc lamp. For more photos and details on the process, see item 6059.5P. In photos .3P to .5P the technician is preparing a orthophotomap film positive. Photo .6P is the rear view of the tri-linear film punch. In photos .7P and .8P the technician is operating a heavy-duty guillotine to trim bulk printed map stock. Cartographers normally provided trim marks to specified map dimensions as guidance to the printer. The trimming stage, like all the other printing processes required high levels of accuracy. These guillotines were extremely powerful to cut through bulk quantities of printed maps. For more photos and details on this process, see item 6069.6P. In photo .9P the technician is operating a daylight film contacting frame. In photo .10P LT Ian Stoddart is taking a well-earned break.This is a set of 10 photographs of lithographic technicians undertaking tasks at the Army Survey Regiment, Bendigo c1990s. Photos .1P to .7P and .9P to .11P are on 35mm negative film and scanned at 96 dpi. Photo .8P is printed on photographic paper and scanned at 300 dpi. They are part of the Army Survey Regiment’s Collection. .1) and .2) - Photo, black & white, c1990s, unidentified printer technician and SPR Janet Murray using the map proof whirler. .3) to .5) - Colour, c1990s, Mick ‘Buddha’ Ellis preparing an orthophotomap film positive. .6) - Photo, Colour, c1990s, rear view of tri-linear film punch. .7) & .8) - Photo, Colour, c1990s, unidentified technician operating a heavy-duty guillotine. .9) - Photo, Colour, c1990s, printer technician SPR Shona Hastie operating a daylight film contacting frame. .10) - Photo, Colour, c1990s, LT Ian Stoddart taking a well-earned break. .1P to .10P– no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Safety Eyeshields which were issued to protect the eyes from liquid irritant sprayed from enemy aircraft. during WWIIThese eyeshields were the property of one of the pioneer families in the city of Moorabbin. 2 One-piece transparent plastic eyeshield visor, mounted on green green fabric band that is secured by three metal staples. At each end of the fabric band is secured two lengths of black elastic, one end features a metal hook, the other a metal ring, and when joined secure the eyeshields to the wearer's head. The elastic straps are joined to the to fabric by metal pop studs, and these press down into two further pop studs located on the visor making the plastic bend to the shape of the wearer's face. Cardboard case is made of heavy duty card, open one end to form and envelope for storage. A felt material is attached as a cushioned nose strip. They are in a brown paper envelope and contained within a Cardboard case is made of heavy duty card, open one end to form and envelope for storage. There are printed with instruction on how to use them.Eyeshields, Anti-Gass, Mk. II. Air Spray Immediate action to be taken to prevent blisters - with instructions.world war ii, safety equipment, eye shields, anti-gas, eyeshields