Sample taken from overhead (North wire, St Aidans Dve) of new 107mm^2 trolley wire. Has been cut at either ends and has been bent at one end through about 90 degrees also slightly curved. Shining new copper colour. Has minor nicks. See original worksheet for sketch. Images added 3-12-2016 See Kembla Wire & Rod letter of 23/9/1996.ballarat, overhead, trolley wire, kembla wire & rod

Has a strong association with the ESCo shed staff and later tram crews, c1910? Shows the nature of the clothing worn by the depot staff, and one of the crew and the interior detail of the one of the tramcars at the time. Provides details of names of some of the men photographed.Black and White copy photograph of the ESCo power station and tramway staff outside the front of the ESCo Power Station, View Point, Wendouree Parade, Ballarat c1915. Standing on the ground are 26 men and on the tower truck a further 14 men. Shows details of the clothing the men were wearing at the time, depending on the age and company position, details of the horse drawn tower truck, and of the power station and office brickwork. Tower wagon drawn by one Clydesdale horse. See page 53 of The Golden City and its Tramways and for the photo itself. Gives some names of the people in the photograph. From the photo caption in the book: Extreme left Harry Foy, depot Foreman, second from left Mr Knox the accountant; third from left is Walter J.K. Dunstan, office manager, 7th from left Alan Todd, 3rd from right standing is Bob Tregaskis ("Rickety Bob), at left, kneeling is Albert Mitchell, at right kneeling is George Laurens - overhead wire maintenance, standing at base of the tower at right is Tom Richardson, painter, next to him on the left is Sy Barker and at the reins Teddy Hewitt and Harry Weston.tramways, trams, esco, staff, power station, tower wagon

Yields information about construction of "0" road at the Ballarat Tram Depot.Sketch showing the Ballarat tram depot with "0" road sketched in and handwritten notes about the date it was started, finished and the overhead or trolley wire put up in Feb. 1956. Items were contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips - see btm5507-list.pdf for actual location.depot, o road

Colour slide, Kodak, white cardboard of trams W5 725 (North Balwyn) and W2 408 (Spencer St), both route 48 at the intersection of Church St, Burwood Road and Bridge Road Hawthorn with the driver? of 725 getting on the roof to retrieve a trolley pole (with wheel) that cant be positioned because of the overhead span wire. Note the street light behind the tram. 725 has an advert for Penfolds Wine. Slide dated 14-6-60. See Reg Items 4361 for the Chairman Robert Risson on the roof of a tram and 3973 for a related newspaper cutting following the death of a driver.Hand writing on rear in ink "14-6-60 - Retrieving a trolley pole Church St Hawthorn."trams, tramways, route 48, north balwyn, trolley poles, church st, burwood rd, w2 class, w5 class, tram 725, tram 408

Coloured postcard of an ESCo tram westbound at the intersection of Sturt and Lydiard St. Ballarat, c1906 - 7 - has a destination box. There are several pedestrians in the picture. Taken from the east side of the intersection, looking towards the Town Hall, with the National Mutual Insurance building and Snows in the photo. Also shows the overhead arrangements - two wire for Sturt St, single for Lydiard St, coming into the intersection. On the rear of the postcard are the initials "JE" in the top centre, a 1d Victorian stamp, cancelled 5/4/1909, addressed to a Mrs Sproston of Skeleton Cottage Avoca with a message from her granddaughters - Fervie and Edith. See item 3279 for a black-and-white version. Yields information about Sturt St at Lydiard St looking west and the tramway overhead.Printed colour postcard titled Postcard - "Sturt Street Ballarat" used - 1909See image i2 for letter and posting details.trams, tramways, esco, sturt st, postcards, overhead, town hall

Set of 4 black and white photographs of MMTB trialling overhead fittings for pantographs on the West Preston line. .1 - dummy fitting of where two overhead trolley wires cross each other at 90 degrees .2 - cross frog and signal contactor .3 - Section insulators with pantograph pan depression bars .4 - ears fitted to a curve section with a short dropping sections. Handwritten note (filed with photos) giving photo numbers, location and that sent to ET. Not dated as such. Electric Traction magazine issues for June and August 1977 - see image i5 an it advises of the pantograph trials and changes made. W2 546 had been fitted during May 1977 with a pantograph and a closed circuit camera.trams, tramways, mmtb, west preston, overhead, electrical engineering, electric traction, pantographs

Newspaper Clipping - from the Argus 4/7/1935 page 11 (accessed on Trove 16/11/1935) titled "More Electric Trams" of the MMTB overhead crew erecting overhead or the trolley wire in Abbotsford St North Melbourne. Has three different tower trucks in the photo, including a horse drawn one.trams, tramways, conversion, north melbourne, abbotsford st, overhead, tower wagon, tower truck

Printed black and white postcard of an ESCo tram west bound at the intersection of Sturt and Lydiard St. Ballarat, c1906 - 7 - has a destination box. Has a number of pedestrians in the picture. Taken from the east side of the intersection, looking towards the Town Hall, with the National Mutual Insurance building and Snows in the photo. Also shows the overhead arrangements - two wire for Sturt St, single for Lydiard St, coming into the intersection. Titled "Sturt Street, Ballarat" along the top edge. On rear of postcard are the words "Post Card", has initials "WTP" in bottom left hand corner, a 1d Victorian stamp, cancelled 1/5/07, stamp "5". Divided back type. Address to Mrs T.D. Cayett? Falcon St, North Sydney NSW. Note about their travels, where they stayed and that they had travelled to the Gardens by tram. See item 8237 for a coloured version. Black and white postcard - titled "Sturt Street Ballarat" - used 1907trams, tramways, esco, sturt st, postcards, town hall

orchard, margaret bowron, betty williams, dept of agriculture, opium poppy, j l provan, t h kneen, geelong excursion, horses pulling lawnmower, ponds, greenhouses, trees, principal's residence, flying fox, j p mclennan, plants, draught horse, calf, students working outside, luffmann ponds, lily ponds, sequoia sempervirans, californian redwood, gardewn views, prunus glandulosa, magnolia stellata, petunia x hybrida

Digital scanFrom Vicrail News magazine, April 1983. “Duplication of the five-kilometre section of line between Ringwood and Croydon is on the way. Several major works will be undertaken over the next few months so the two tracks can be brought into service later this year. Intensive work on this section follows completion of duplication works between Ringwood and Bayswater on the Belgrave line last December. The completion of this 5.17 kilometre section between Ringwood and Bayswater means that this Belgrave line is now duplicated as far out as Ferntree Gully. Commuters using the Belgrave line now have an improved service with the intro duction in January of an additional evening peak train to Upper Ferntree Gully, two additional peak hour services in the morning from both Belgrave and Upper Ferntree Gully, and with the additional tracks delays on one line will not affect trains travelling in the opposite direction. Commenting on the completion of this stretch of track the Minister of Transport, Mr. Crabb, said a further improvement had been made with the commissioning of boom barriers at the Bedford Road level crossing in Ringwood. "The installation is part of the State Government's $9.4 million four-year plan to equip 70 dangerous level crossings throughout the State with boom barriers", he said. Works to be carried out on the Ringwood/ Croydon section include laying of new track, station works at Croydon and installation of boom barriers at East Ringwood. Already completed are bridge works to cater for double tracks at both Mt. Dandenong and Eastfield Roads between Croydon and East Ringwood and construction of an island platform at East Ringwood station. At several locations alignment of the existing track will be slightly relocated. The new line is being constructed with concrete sleepers and heavyweight rails. The existing line will also be reconstructed using these heavy 60kg per metre rails. Engineering works to be completed include installation of overhead wiring necessary to supply power to trains, construction of two new station buildings and a new platform at Croydon, provision of boom barriers, and pedestrian boom barriers at Dublin Road level crossing. East Ringwood, and replacement of existing timber overhead wire support structures with steel structures. Other works in this program included installation of boom barriers at Bedford Road, Ringwood and Scoresby Road, Bayswater and provision of a new platform for trains going to Melbourne and Heathmont. A new timetable on the Lilydale and Belgrave lines will commence when the Ringwood—Croydon duplication track work is completed.”

.1 - Book - 8 pages + grey covers, side stapled, issued by the Australian Standards Association, "Electrical Voltages and electrical frequencies for new installations ", C1 (a&b) - 1926, December 1926. .2 - Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Overhead Line wire material for telegraph and telephone purposes", C3-11-1925, November 1925. .3 - Book - 20 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Telephone cable, paper insulated lead covered", C12 - 1928, January 1928. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Marking for Switchboard bus-bars and connections" C13 - 1925, December 1925 - with a pasted green label noting that the "tentative standard is now endorsed as Australian Standard without amendment" - dated Oct. 1930. .5 - Book - 32 pages + grey covers, side stapled, issued by the Australian Standards Association, Tentative Australian Standard "Dimensions and Resistances of Bare Annealed Copper Wire for Electrical Machinery and Apparatus", C 18-1926, October 1926. .6 - Book - 12 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Slate Slabs for Electrical Purposes", C19 - 1926, July 1926. .7 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Moulded Flat Top Insulation Bushes" C20-1926, October 1926. .8 - Book - 16 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Insulation dimensions and resistance of enamelled plain copper wire for instruments and apparatus" C21-1928, January 1928. .9 Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Watertight Glands for electric cables" C22-1926, September 1926. .10 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

Its manufacture demonstrates from an industrial aspect a period of history following the occupation of Japan by the USA after the second world war and has a strong association with this event.Insulator - known as an egg type - ceramic - fired clay (porcelain) finished with a brown colour with two holes for span wire with the holes offset to each other. Marked in a very light almost clear finish on one side "Made in Occupied Japan" See item 8534 for another example - a larger size. https://www.gotheborg.com/glossary/occupiedjapan.shtml - accessed 15/4/20201 gives some background: "For the period from the end of World War II in 1945 through April 28, 1952, the United States and its Allies occupied Japan. The Occupation involved approximately 130,000 Americans (both military and civilian) and about 35,000 British Troops based in Japan. SCAP (Supreme Commander for the Allied Powers), led by General MacArthur, wrote a new constitution for Japan. As Japan needed to rebuild their economy after the war, part of the agreement to allow them to export goods out of their country was that they had to mark 50% of all items with "Occupied Japan" or "Made in Occupied Japan." This could be done with a paper label, cloth label (as on scarves, doilies, clothing), engraved, handwritten or stamped. Thus, you may come across things, such as a salt and pepper set, where only one of the pair is marked OJ and the other will just have "Japan" on it. The tags, labels, marks were placed on the items in Japan, before they were exported to other countries. "trams, tramways, overhead, trolley wire, insulation, electrical equipment

Finial - component that fitted into the end of a steel bracket arm - cast steel - with a rounded and shaped end and internal hexangular end and two holes to enable a screwed bolt to be fitted and hold the fitting into position. Item has been painted in red ferric colour red pain and is showing corrosion.trams, tramways, overhead, trolley wire, fittings

Part of a tramway overhead wiring system, supplying electricity to power the tram. Two devices bolted together; a 'Hanger' and an 'Ear'. Together these devices suspend the tramway trolley wire from the 'side bracket', or a 'span wire'.Historical EquipmentTwo devices bolted together; a 'Hanger' and an 'Ear'. The ear is a '4 screw' ear. Together these devices suspend the tramway trolley wire from a 'side bracket', or a 'span wire'. There is a short piece of trolley wire attached to the ear.68/16 stamped on one sidetramways, equipment, trolleywire

Yields information about the removal of the overhead in Lydiard St North, following the closure of the SEC operated tram system in Sept. 1971Set of two colour digital images taken by W. J. Llewelyn of the removal and cutting up of the overhead and cutting the copper trolley wire in Lydiard St North - Oct. 1971? Shows the method and equipment used. Has a van marked "Arch Smallgoods" in Lydiard St North. Shows the Mair St traffic light, and Railway Hotel on the corner. In the background is the George Hotel, St Paul's Technical College, and Union Fidelity Trustee Company buildings in the background. Warren Doubleday remembers being there at the time, but can't find a photograph of it and date.trams, tramways, lydiard st, closure, secv, overhead, demolition

Demonstrates the type of equipment used in overhead electrical collection parts and has a strong association with Ballarat trams..2 - Photocopy of the record cards "Car History", 10 sheets cut to size, giving dates, repairs, accidents, notes and maintenance of the tramcar.trolley wire, overhead, electrical equipment

Set of five colour photographs of Trolley Wire replacement in Wendouree Parade sent to the Editor of Trolley Wire - 2 used in the May 1997 issue of Trolley Wire. All photos by Carolyn Dean. All photos taken on 4-3-1997. All photos on AGFA paper. 1139.1 - Working on the trolley wire just to the north of Gardens Loop 1139.2 - Alan Snowball's Ute and trailer with wire reel, North Gardens area. 1139.3 - Replacing wire -group photo around behind truck - used on page 38 of Trolley Wire. 1139.4 - General photo of work with Ute and trailer in foreground and tower truck in background. Wire run out for a number of pole lengths - used on page 38 of Trolley Wire. 1139.5 - Photo of work on trolley wire replacement with tower truck. All have in black ink "4.3.97" and "Photo by / Carolyn Dean". 1139.3 has "Gardens Loop" in blue ink on top edge, and white sticker with "Photo 56 / 14.4 x 9.5cm" written on in black ink. 1139.4 - has white sticker with "Photo 57 / 14.5 and 7cm" written on in black ink.trolley wire, btm, wendouree parade, overhead

Set of three colour photographs of the delivery and hand over of the Trolley Wire by the Minister of Transport Mr. Alan Brown on 26/11/1996 sent to the Editor of Trolley Wire - used in the February 1997 issue of Trolley Wire. All photos by Carolyn Dean. All photos on Kodak paper. See also Reg. Item No. 503 (Newspaper Cutting) and Item 721 for photo used on page 29 as well as these three photos used on pages 28 and 29. 1141.1 - Two reels of trolley wire on delivery truck on side of depot fan. 1141.2 - Off loading one of the reels with the Barry James Tractor Crane. 1141.3 - Photo of Alan Brown speaking with Member for Ballarat West Paul Jenkins alongside and Richard Gilbert standing some distance away. Trams 671 and 33 in the background.All have date of photo "26.11.96" along top edge and "Photo / Carolyn Dean" towards bottom right hand corner. Also various cropping marks on the photo used in publication.trolley wire, btm, overhead

Booklet with blue Rexene cover and round corners on heavy card with sheet of paper glued on inside of covers and 32 printed pages stapled with in, titled "Instruction for the Guidance of Employees working on or within reach of Live Low Voltage Conductors". Also possibly known as the "L.V. Blue Book" - see top of definitions page. Dated 1949. Above title has name of the organisation - SECV - Electricity Supply Department. Inside front cover has space to record name and occupation of person issued to. In bottom left hand corner has form number "596-210 R2" Has been stamped "L. J. Denmead" by a hand stamped in blue ink and words "Departmental Tramway Supt." written in using blue ink. See image file 1854i2.jpg Book details procedure and rules for SEC employees working on or near low voltage conductors or Powerlines. Covers general matters, authorised employees, work on low voltage overhead lines, moving a conductor near live wires, public lighting, radio and carrier circuits, batteries, portable equipment, metering work on consumer premises, and definitions. Consists of 32 pages sheets of paper, printed and folded with one staple centrally and then stapled into the covers with paper inside pasted onto cover. Contents pages are not numbered. Covers blocked in blackSee issuing details above. On front cover in blue ink "L. J. Denmead / D. T. Supt"trams, tramways, sec, power lines, linesman, safety

Black and white print of a donated negative. Print made 8/1998. Photo of Victorian Railway tram No.34 at the Brighton Beach terminus. Tram has the destination of "St Kilda Rly Stn". In the overhead can be seen the pan for assisting the driver to put the rear pole onto the wire. Also in the background of the photo is a stone wall of the railway tunnel under the road that served the Brighton Beach Pier. Photo taken 7-4-1950. See Victorian Railways to '62, pages 47 and 49 re railway tunnel.tramways, trams, brighton beach, vr, railway tunnel, tram 34

Sample of wire from the State Electricity Commission (SEC) Yallourn Morwell area. Shows wear on lower edge - from pantograph operation. About 75mm from one end shows marks of two screw ears, used to hold overhead into position. Images added 3-12-2016trolley wire, secv, yallourn

Piece of heavily worn trolley wire taken from south bound ear, just before ear 41B. Wire in area (on the joiner side) had failed about two months prior to replacement. Sample taken 8 December 1997 during replacement operations. Was on a curve. Two screw marks at one end from being inside a wire joiner. Heavily worn over the years with groove only one side of wire. Top of wire green (oxidised) and dark grey on underside where not contacted by wheel. Has been cut at both ends. Wire curved after taking down naturally. See item Reg No. item 514 for original wire size details. Images added 3-12-2016 See Reg. Item No. 514 ballarat, overhead, trolley wire

Original c 1914 (see below), facsimile copy - re-published 1972. Original features photos of Ballarat City and Town, its buildings, parks and the various industries and organisations that were in Ballarat at the time of publication, including ESCo. Many photos features ESCo trams. Photos sepia toned. Has some red colour block printing on the front cover and rear, for Star Oil Engines. On inside back cover is a map with the places of interest and tram route map, marked in red. Pages are un-numbered. Original published by Ballarat East Town Council and Ballaarat City Council. On cover has number stamped in black in, "No. 87" (assume facsimile copy No.). Photos with publication show tram No. 21, built 1913 and ESCo photo page shows Mr. Pringle as Manager. Mr Pringle became manager in January 1911, As there is no photos of the "Avenue of Honour", or other mention of the first world war, assume original published about 1913 or 1914. Original shows Engravings and printing by "Campbell Wilson Prop Ltd, Ballarat". See Other Information as well for more listing details. High Resolution image added 31/8/2012 of i2 of ESCo page and i3 for Ballarat identies and sheet i4 extracted for Mr Pringle. PDF scan of full document added 21/5/2019 - see images btm633-1i.pdf and btm633-2i.pdf Notes on "Ballarat Illustrated" Reg. Item No. 733 From notes made by Neville Gower 12/1/1997 Cover: Inside front cover: Last paragraph, "Facilities for Travelling" - Electric trams serve all parts of Ballarat. Page 3: Street Scene, Municipal Town Hall, showing tram wiring Page 7: Street Scene, Lydiard St. North, intersection and tramway centre, with ESCo tram No. 21 in the bottom photo. Other photos features trams as well in Sturt St and Lydiard St. North. Page 9: Street Scene, Top photo of Sturt St. from Lydiard St. looking east, shows piles on right-hand side of road. Car parked by Post Office has a car registration number "9007". Bottom photo, an tram climbing hill, shows double trolley in the street, with early English type of pull offs. Page 13: Street Scenes and Historic Buildings: One of five photos, shows Victoria St. looking East, with tram track prominent in photo and how stone work was set up about the rails and overhead poles. Page 23: Street scene, Gardens North Entrance gates, shows details of gates near St. Aidans Drive. Note double trolley wire on poles, and style of insulators. No trams in photo, three ladies walking down the track. Page 37: Street Scene; Lydiard St views, top left hand photo, shows Railway station and railway gates with signal gantry and horse drawn vehicles. Tram tracks apparent. Bottom left hand photo shows Lydiard St. North, near Post Office, double track with centre poles - Single wire per track. Top right hand photo, showing Cemetery gates in background. Bottom right hand photo - from north end of Lydiard St. South, looking north, with an ESCo tram in background. Also has a parked car on left hand side. Page 45: Street Scenes - Bridge St; top photo at west end of Bridge St. with ESCo No. 11 with possibly double trolley wire in photo. Bottom photo at east end of Bridge St. with tram in background, shows junction. Double trolley heading out to Mt. Pleasant, single trolley for Victoria St. Page 45: Street Scenes - Bridge St; top photo at west end of Bridge St. with ESCo No. 11 with possibly double trolley wire in photo. Bottom photo at east end of Bridge St. with tram in background, shows junction. Double trolley heading out to Mt. Pleasant, single trolley for Victoria St. Page 61: Street Scenes and Historic Buildings - Public Institutions Ballarat - top left hand photo of the Hospital shows some tram track in foreground, with double trolley wire. Top right photo is of the Orphanage, the name of the tram terminus for many years. Page 68: Electric Supply Co. of Victoria's pages - top photo showing powerhouse in background, across the lake, can hardly see anything for the trees, except for the chimney. Bottom photos of the steam Turbo Generators and the switchboard. Gives Mr. P.J. Pringle as Chief Engineer and General Manager. He took over in Jan. 1911. Page 69: Ballarat East Views - features photo of Black Hill open cut, Ballarat East Railway Station, Ballarat Fire Station and "Victoria St. looking East", repeat of photo printed on page 12, but slightly darker. Image on system includes fire station and railway station, - Ballarat East. Page 78: Series of photos of various Ballarat VIP's of the era, fourth one in on top line features "P.J.Pringle, Electric Supply Co." Inside Back cover - map of Ballarat including tram lines and places of interest marked in red. Gives a detailed photographic presentation of Ballarat in 1914.80 page book with, in addition, light green card covers, titled "Ballarat Illustrated". Loose copy of page 9 and 10 held.trams, tramways, ballarat, local history, heritage buildings, esco

Set of 8 black and white photographs of the SEC Ballarat track welding truck, Reg. No. 119 341. Truck is a British Bedford truck, model WHG, built by GMH Melbourne between 1932 and 1934. Has a fabric roof, chassis fitted with a tray top body, side tool box, metal frame and covered with canvas, fitted out with a motor generator set, welding equipment and oxy acetylene bottles. Also fitted with a spot light - 'Auto Reel Lite". - See Related Items sheet on truck notes provided by Kevin Oates, MFESB workshops, 4/2001. (Scan of this sheet of the Kodak folder added 15-8-2017 - see pdf file.) 1705.1 - side on view of truck with covers down, except for opening at back. Photographed in Wendouree Parade with two different boat sheds in the background. 1705.2 - view with drivers side cover opened, showing equipment arrangement. 1705.3 - close up view of motor generator set and controls and one of the oxy acetylene bottles. 1705.4 - view showing equipment laid out on the roadway, welding cover, seat, grinder, cables, shovels, welding mask etc. 1705.5 - close up view of motor generator control panel and associated cables. 1705.6 - view of side of truck showing all equipment. 1705.7 - vertical format photo from rear of truck showing equipment laid out and wandering lead connected to the overhead. Also shows high voltage wires on a power pole fitted with a bracket arm. 1705.8 - view of truck from the front, with SEC symbol on side, with a covers closed. Thought to be photographed at loop in Wendouree Parade on the View Point line, near Mill St. Prints when donated to the BTM were contained within a red and yellow "Kodak" folder. Folder stored with catalogue worksheet. On rear of folder in ink is number "53569" and stamped on the front is number "984" and written in front top left hand cover, "8 prints" and in top right hand corner word "Sarah". See Notes provided by Kevin Oates of the MFESB (Metro Fire Brigade Melbourne) Thornbury workshops on the truck, manufacture and engine. A survey of Wendouree Parade on 22/4/2001 did not show the boat sheds or power lines featured in the photographed. Thought to be in vicinity of Power station because of the high voltage lines on the power poles.Stamped on rear in black ink, "984" on photos 1705.3 to 1705.8.trams, tramways, welding truck, trackwork, secv, wendouree parade

Short ear (3 screw) with worn trolley wire bent at either end. Ear - brass, with clamp on fitting used to hold trolley wire in position and steel bolt, steel spring washer. Trolley wire cut about 40mm on either side. One side has pulled out of ear - has no groove on one side. Shows how ear has worn while in service. Screws could not be removed while attached to wire. See original worksheet for sketch. Images added 3-12-2016ballarat, overhead, trolley wire, fittings

Piece of worn trolley wire (copper, probably cadmium copper) taken from north bound trolley wire between poles 9 and 17 (Loop and St. Aidans Drive) on 4/3/1997 during replacement operations. Is badly worn on one side. OK on the other side - slightly curve with worn side on the outside of the curve. Green (Oxidized) and sides, dark brown on top. Has been cut at either end. Images added 3-12-2016 See p14 of Section 65 of ICS Manual Tramway systems etc. London c1921.ballarat, overhead, fittings, trolley wire

Piece of partly worn trolley wire taken from North bound wire between poles 9 and 17 (Loop & St Aidans Drive) on 4/3/97, during replacement operations. Is slightly curved, and only partly worn, both grooves are still good. Has been cut from other wire. See sketch on original worksheet for colours of wire. Images added 3-12-2016ballarat, overhead, fittings, trolley wire

Piece of trolley wire taken from North bound wire between poles 1 & 9 - curved, worn on underside, with longer or sharper groove on inside than normal, probably due to metal flow. Has been cut from wire. See Reg. Item 514 for original wire size and notes. Images added 3-12-2016ballarat, overhead, fittings, trolley wire

Long ear, 6 screws, ex South wire, at location 14D showing badly worn ear, broken screw head, worn wire etc. Screws faced East. Screws were partially undone on 3/3/97. Ear- Brass, Wire-Cad Copper. See original worksheet for sketch and Reg. Item 514 for wire sizes. Images added 3-12-2016ballarat, overhead, fittings, trolley wire