Station Sign - Emerald Emerald Station is situated on the Puffing Billy Railway in Victoria, Australia. It was opened with the Railway on 18 December 1900 and comprised a platform track and a loop siding. A passing loop was added between the two a few years later. There was also a spur siding off the Down end of No. 3 Road. Two standard 12 ft by 20 ft timber portable station buildings with a Van Goods Shed between (all adjoining) were provided on the platform and a Goods Shed on the No. 3 Road loop siding. Other buildings included Tea Rooms, lamp room and toilets along with a cattle race and loading bank. The station building was later reduced in length by one of the portables which housed the General and Ladies' waiting rooms. Emerald today remains very similar to the early days, but has had other Roads added into a Carriage Workshops, a turntable and storage sidings. Also, a Signal and Telegraph Branch depot in the form of a large Goods Shed and a multi-purpose yard building in the form of a Locomotive Depot administration building have been added. During 2009, the station building underwent stage one of an internal restoration to its former glory. ref: https://en.wikipedia.org/wiki/Emerald_railway_station,_Victoria photos at http://www.vicrailstations.com/Gembrook/Emerald/Emerald.html Historic - Victorian Railways Station sign used at Emerald Station Station Sign - Emerald Metal rectangle Station Name Sign with white enamel back ground and black lettersEmeraldstation sign, puffing billy, emerald station

One of the three projectors used in every trip was this 16mm Portable Projector, which was used taken to about 60 towns and cities around Australia, as Mr Yiannoudes states. This projector is in working condition serviced by Mr Yiannoudes himself regularly. It is an optical and magnetic sound projector, a rare one of its type.Primary historic significance as well as rarity significanceFrom January 1959 and until 1982, “Cosmopolitan Motion Pictures”, owned by Mr Peter Yannoudes (Παναγιώτης Γιαννούδης) and Mr Stathis Raftopoulos (Στάθης Ραφτόπουλος) travelled around Australia to entertain the Greek, Turkish, Indian and Yugoslav speaking population of Australia and provide a significant cinema culture. They travelled as far as Perth in WA, Adelaide in SA, Tasmania, Darwin in Nt, Canberra in ACT and Sydney and NSW. However they found themselves also in places like Berri and Renmark in NSW, where concentrations of migrants lived and thrived during the period. Initially they were travelling by train, carrying all their equipment by hand and placing them in boxes and suitcases. However after 1962 when they acquired their first automobile, travelling became less of a burden, nevertheless cumbersome and laborious. They carried with them initially two portable projectors (second one as a backup) and at times travelled with a third in order to ensure that technology will not be letting them down at the time of film projection. At times the films were projected onto a white sheet of cloth because there was no proper screen to project it on at the venue they were using. One of the three projectors used in every trip was this 16mm Portable Projector, which was used taken to about 60 towns and cities around Australia, as Mr Yiannoudes states. This projector is in working condition serviced by Mr Yiannoudes himself regularly. It is an optical and magnetic sound projector, a rare one of its type. Apart from this projector these items were taken on each trip. -a- 3 projectors in total -b- 2 tripod stands -c- 1 20 feet x 10 feet screen -d- 6 projector lamps and 2 exider lamps for sound -e- 2 extra lamps per film to be shown -f- 1 film rewinder (see rewinder in same collection)Siemensprojector, film, magnetic, sound, optical, language, greek, siemens, german, γιαννούδης, προβολέας, yiannoudes, plutarch

Military communications and signaling equipment used from 19421942 portable morse code set with a day signaling light and spare globes. All fitted in timber carry case with webbing strap.Plate "Lamp Signaling Daylight. Short Range Case MK IIPMG MELM1942" S/N 10356. Operating instructions on spare globes box lidmorse code, wwii, signaling

This portable, hand held visual signaling lamp, with trigger mechanism and inner reflective disk, was used for optical communication via Morse code, with the concave mirror tilted to focus the light into pulse signals. Larger versions of these lamps are fixed on ships or pedestals and have shutters in front of the light that are opened and closed to transmit signals. Smaller hand held versions like the Cape Nelson example have a concave mirror that is tilted to focus the light into pulse signals, and despite their size the lamps were renowned for their brilliant light. Invented by Arthur C W Aldis (1878‐1953) and pioneered by the British navy in the late nineteenth century, they continue to be used to the present day. Details on the Cape Nelson lamp include a serial number, a date of 1960 and the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Another lamp of the same date which is held at Wilsons Promontory was provided to the lighthouse by the Department of Shipping for signaling ships but was also used for communicating with Cliffy Island, 18 nautical miles away. Point Hicks also has an Aldis lamp and an associated case, which is painted an army green colour. A fourth lamp and case formerly at Cape Schanck disappeared from the collection sometime between 1995 and 2003. These types of lamps are not rare in museum collections.These types of lamps are not rare in museum collections however the Cape Nelson example has a reliable provenance to the lightstation and has first level contributory significance as a fine example of the Aldis lamps that were distributed to lightstations throughout Victoria and Australia.This object is comprised of a black metal encased Aldis lamp with electrical cord and associated wooden carrying case with metal clasp and red leather hand grip. yes

Used in the early 20th CenturyAn early 20th Century glass and rusted tin "hurricane" lamp with three wire curved horizontal bands protecting the clear chimney glass. This is a portable lantern with an oil tank at the bottom that forms the base of the lamp. The tank is filled through a metal tube with a screw top lid and it also houses a wick and knob that increases or decreases the length of the wick.lantens, kerosene lamps, lighting equipment, lamps

Used in the early 20th CenturyAn early 20th Century glass and rusted tin "hurricane" lamp with curved wire protecting the clear chimney glass. This is a portable lantern with an oil tank at the bottom that forms the base of the lamp. The tank is filled through a metal tube with a screw top lid and it also houses a wick and knob that increases or decreases the length of the wick.lamps, kerosene lamps, lighting equipment, lanterns

This portable, hand held visual signalling lamp was used for optical communication via Morse code. It comprises the metal encased Aldis lamp with electrical cord and its associated green-painted, hinged wooden carrying case, which has a metal clasp and leather hand grip. Larger versions of these lamps are fixed on ships or pedestals and have shutters on the front that are opened and closed to transmit signals. Smaller hand held versions like the Point Hicks example have a concave mirror that is tilted to focus the light into pulse signals via a trigger. The lamps were pioneered by the British navy in the late nineteenth century and continue to be used to the present day.317 Details on the Point Hicks lamp include a serial number and other information. Another Aldis lamp and case remaining at Cape Nelson Lightstation dates to 1960 and has the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Wilsons Promontory also has an Aldis lamp and case that dates from around the same year. A lamp formerly at Cape Schanck has disappeared. The Aldis lamp and associated case at Point Hicks has first level contributory significance for its historic values and provenance to the lightstation. PHLS0007.1 Hand held signal light. Painted metal trigger with attached black electrical leads with battery terminals at end. Inscriptions on metal of lantern. PHLS0007.2 Hinged lid, wooden box painted army green to house signal light. Metal plate with inscription on front of box.PHLS0007.1 "D^D / LANTERN PORTABLE SIGNALLING / ADMIRALITY No 5110D / SERIAL No 5482 YEAR 943 / AMALGAMATED WIRELESS / A ASA LTD / 9792-100" •PHLS0007.2 "20 K4 transporting lantern / admirality pattern no 91108"

These lamps would have been used in the late 19th and early 20th centuries for outdoor, industrial, or domestic lighting, before the widespread availability of electric lighting. The left lamp is a traditional lantern, likely used for portable lighting, either carried by hand or hung on a hook. It could have been used on farms, in railway stations, or in military settings. The right lamp is an oil or kerosene lamp, possibly wall-mounted and used in stables, workshops, or early automobile garages. The reflector helped to direct light forward, making it more efficient in dimly lit spaces. Both lamps have significant wear and damage, indicating long-term use and exposure to the elements.The image shows two old metal and glass lamps, both exhibiting signs of heavy wear and damage. Left Lamp: A rectangular lantern-style lamp with a metal frame and glass panels on all four sides. The glass is cracked and broken, with missing sections, and the metal frame is corroded and bent. A metal loop handle at the top suggests it was meant to be carried or hung. The interior appears hollow, where a candle or oil lamp would have been placed for illumination. The metal has a dull silver-grey finish, likely due to oxidation. Right Lamp: A cylindrical oil lamp with a flat back and a hinged metal reflector at the top. The base contains a round opening, likely where the wick holder and burner were originally inserted. The metal body is painted or enamelled, but the finish is chipped and worn. The top reflector is bent and dented, but the hinge remains attached. The flat back suggests it was a wall-mounted lamp, possibly used in barns, workshops, or railway applications.lamps, kerosene, lamp, candle, light

Kerosene lanterns like these were commonly used from the mid-19th century to the early 20th century before electric lighting became widespread. Railway & Signal Use – Some lanterns, particularly those with enclosed rear casings, may have been used as railway signal lamps. Camping & Outdoor Use – The smaller, lightweight designs were portable, making them useful for camping, farming, and night-time travel. Household & Industrial Lighting – Before electrical grids, kerosene lanterns were used for home lighting, barns, and industrial workspaces.This collection consists of several rusted kerosene lanterns, showing various designs that were common in the 19th and early 20th centuries. Key features include: Metal body construction, likely iron or steel, with a cylindrical glass globe in most of the lanterns. Protective wire guards, designed to shield the glass globe from breakage. Carrying handles and hanging hooks, allowing them to be portable or mounted. Some lanterns feature side reflectors or enclosed rear casings, suggesting they may have been used as railway or signal lamps. Different shapes and sizes, some with rounded oil reservoirs, while others have flat-bottomed bases for stability. The lanterns show significant wear, with rust and corrosion evident on the metal parts, and some globes showing dirt, soot, or residue from past use.lantern, light, lamp, household item

In the 1890s, American Ever-Ready Company founder Conrad Hubert invented the electric flash light which worked with his dry cell batteries . The first Ever Ready flash light was patented in 1898. The first portable flashlights were hand-made from crude paper and fibre tubes, with a bulb and a rough brass reflector. Because batteries were weak and bulbs primitive, flashlights of the era produced only a brief flash of light- thus the name. This torch is named a Bullseye because of the glass lens at the top.This torch helps to interpret the development of lighting. The collection of whale oil lamps as well as gas and electric lighting. Silver coloured metal torch. It has a body and a lid/top. The body is hip flask shaped. On the side of the body is a silver coloured metal button which can be slid up and down. On both the front and back of the body and the top centre are tow small raised circles. The top, which can be removed has a glass dome on it. The inside of the body has a small piece of contact metal where the slide button on the outside turn the torch on and off. In the centre at the top there is the light bulb. The base of the body can also be removed. The base has the makers mark EVER READY stamped on it.Lid light: FY (within a diamond shape) / PATENT 40092 Base: EVER READYlight, torch, lighting, portland, glenelg shire

(Candle Holder 1) Likely used as a bedside or household candle holder in the late 19th or early 20th century. The enameled surface suggests it was made for durability and ease of cleaning. The handle design indicates it could be portable or mounted on a wall. (Candle Holder 2) Could have been used in homes, barns, or workshops for lighting. The metal construction suggests it was a practical and durable design. The reflector would have helped maximize light output, making it useful in dimly lit areas. (Lantern 3) Likely used for outdoor or travel lighting, possibly in the late 19th or early 20th century. The enclosed glass design suggests it was meant to protect the flame from wind and rain. Could have been used in homes, farms, or for transport by foot or carriage.(Candle Holder 1) A round, shallow dish-style candle holder with a central cylindrical candle socket. It has a curved handle on one side for carrying or wall mounting. The surface appears to have remnants of white enamel coating, which is chipped and worn. (Candle Holder 2) A round metal candle holder with a shallow dish and a cylindrical candle socket. Attached to the back is a small flame snuffer. (Lantern 3) A rectangular metal lantern with glass panels on the sides. Features a peaked, vented top for heat dissipation. A candle is visible inside, secured in place. The frame appears to be reinforced with metal wire.lantern, light, lamp, candle holder, candle, household item

The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney. Shortly afterwards, the Anaesthetic and Portable Machine Company of Sydney devised a machine that was functionally the same but also contained an electric lamp heater.Colour photograph of a modified Lidwill anaesthetic machine sitting on carpet, taken from above. The vaporiser is metal and circular, and has metal valves and controls and two orange tubes. The machine has an electric cord and power plug which is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, anaesthetic and portable machine company of sydney, vaporiser