Used in the 19th century.A forged steel narrow bladed double Peg and Rake toothed crosscut saw with no handles. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.Stamped on the saw: made of Simond Steel, Trade mark Reg. Warranted The Simond Saw Est 1832, Simond Steel & Saw co USA. Crescent Ground Steel Mill, Lockport New York. Factories Fitchburg Mass, Montreal Quebec No 325hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Part of an article entitled 'Raking the coals' about the church's work in Exmouth. Chaplain H. Doug Palmer was chaplain to the joint US/Australian base.Palmer is shown dressed in navy whites sitting at his desk.Identification of name and source.palmer, h. doug, exmouth naval base

Photographs of students digging with spades and rakes, c. 1980s. One of the photographs is labelled Arbor Week. Please contact [email protected] to request access to this record.hawthorn

Date made July 1991Black and white photograph of a section of the foreshore, showing two workers raking lawn area, prior to planting two date palm trees, part of the beautification of footbridge approach from Esplanade. Lakes Entrance Victoria. waterfront, vegetation, public works

A small combined hoe and rake metal headed hand scarifier or cultivator tool with a wooden handle. It has a pointed hoe shape at one end and at the opposite two hooked spikes. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

It was used on well worked ground.A combined hoe and rake metal headed hand scarifier or cultivator tool with a long wooden handle. It has three curved metal hooks with sharp points and was used to break up the ground. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

Belonged to Susan Erey's grandmother and mother - C 1909 - 2011Example of interesting personal objectSmall personal fan. Marked La Braise Pat 21777 (French - English, The Breeze (Feminine) - nickel plate|steel. -3 bladed fan (plastic) operated rake + pinion movement with a thumb plunger. -decorated with pierced cavities in case filled with red enamel.La Brise Pat 21777costume accessories, female

Used in the timber industry in the Orbost district. This is a two person operated cross cut saw which functions as a pit saw. A log is placed over a pit lengthways. The man on the top walks along the log and pulls the saw upwards, and he man below pulls the saw downwards. This saw therefore cuts in both directions. This type of saw was often used in the ship building industry for cutting planks.A long raker saw which has been installed into the Slab Hut Shed in a vertical position as a pit saw. It has a metal handle extension at the top which has a wooden handgrip attached. Towards the bottom of the saw, a wooden handle had been added to the saw. timber-industry-tool raker-saw pit-saw

Ertoel Wheels made a wide range of looms, chairs, drum and hand carders, and spinning and weaving accessories. Small drum carder, designed to be used on a table and operated by hand to card wool and or other fibres in preparing them for spinning or felting. This wooden carder has two cylindrical drums covered with coarse or fine metal “tines” designed to rake through and comb the natural fibre. The manufacturer's name 'Ertoel Wheels' is glued at one end"Ertoel Wheels"wool carding, drum carders, carding equipment

Yields information the construction of the depot fan extensions for four and five roads and has a strong association with the workers in the photograph.Colour print of Dave Macartney raking ballast on the extension of track for four and five roads, c 1979. Three road extension pig sty ski jump can be seen in the background. (Note photo of the same type as Reg item 4679 and 4680) 1979 - 1980 Annual Report shows a photograph on the front cover of the trackwork nearing completion.trams, tramways, depot construction, btps, trackwork

The photo appears in an article titled "Raking memory's coals", about a visit by Roger Mitchell to Exmouth in 1983, where UC National Mission is at work on the frontier in the West. "In the car and over a meal we meet National Mission's community worker Bernice McLeod, self-effacing to the point of frustration, shrugging off a role in the oddly-mixed US base town which some say makes her saintly; others a pillar of the community."Bernice McLeod is shown playing with a small child.C&N 13/6/84 p. 3, p. 19.mcleod, bernice, exmouth, uc national mission

Eight coloured photos of Stawell's Water system. a. Old Valve house Pomonal b. Old Valve house & inlet grating from tunnel cutting. c. Old Valve house & Main ground grill. d. Sludge trap. e. interior of water supply tunnel at Pomonal. f. Tunnel showing outlet litter trap with rake for cleaning trap. g. Tunnel entrance at Pomonal. h. Vandal shattered cncrete pipe with multiple wire reinforcing (old?) Eight colour photographs of buildings, tunnels and equipment in bush setting.grampians water supply

Carmel Welsh Church is located at 365 Albert Street, Sebastopol and is the only identified Welsh Presbyterian church surviving in Victoria,. It was built in 1865-6 to the design of Henry Richards Caselli, and of distinctive architectural character combining round arched windows of almost a Renaissance character, mediaevalising buttresses, and extremely chunky gable eaves of a domestic character, including square finials and raking brackets. It was established in 1861, the members and adherents were predominantly Welsh, the Welsh language was spoken freely and there were regular services in Welsh.Digital photograph of the door of the bluestone Welsh church, Sebastopol, Ballarat.carmel welsh church, sebastopol, bluestone, church, henry richards caselli, welsh

Carmel Welsh Church is located at 365 Albert Street, Sebastopol and is the only identified Welsh Presbyterian church surviving in Victoria,. It was built in 1865-6 to the design of Henry Richards Caselli, and of distinctive architectural character combining round arched windows of almost a Renaissance character, mediaevalising buttresses, and extremely chunky gable eaves of a domestic character, including square finials and raking brackets. It was established in 1861, the members and adherents were predominantly Welsh, the Welsh language was spoken freely and there were regular services in Welsh.Digital photograph of the interior of the bluestone Welsh church, Sebastopol, Ballarat.carmel welsh church, sebastopol, church, henry richards caselli, welsh

Carmel Welsh Church is located at 365 Albert Street, Sebastopol and is the only identified Welsh Presbyterian church surviving in Victoria,. It was built in 1865-6 to the design of Henry Richards Caselli, and of distinctive architectural character combining round arched windows of almost a Renaissance character, mediaevalising buttresses, and extremely chunky gable eaves of a domestic character, including square finials and raking brackets. It was established in 1861, the members and adherents were predominantly Welsh, the Welsh language was spoken freely and there were regular services in Welsh.Digital photograph of ta stained glass window in the Carmel Welsh church, Sebastopol.Serve the Lord with gladness, come before his presence with singing. In loving memory of David William Davies Died Dec. 28th 1932 Choirmaster 1875 to 1885carmel welsh church, sebastopol, church, henry richards caselli, welsh, stained glass, david william davies, choirmaster

Carmel Welsh Church is located at 365 Albert Street, Sebastopol and is the only identified Welsh Presbyterian church surviving in Victoria,. It was built in 1865-6 to the design of Henry Richards Caselli, and of distinctive architectural character combining round arched windows of almost a Renaissance character, mediaevalising buttresses, and extremely chunky gable eaves of a domestic character, including square finials and raking brackets. It was established in 1861, the members and adherents were predominantly Welsh, the Welsh language was spoken freely and there were regular services in Welsh.Digital photograph of ta stained glass window in the Carmel Welsh church, Sebastopol.In memory of the Welsh Miners who from the darkness of the mines brought the light of Christ to Carmelcarmel welsh church, sebastopol, church, henry richards caselli, welsh, stained glass, miners

Carmel Welsh Church is located at 365 Albert Street, Sebastopol and is the only identified Welsh Presbyterian church surviving in Victoria,. It was built in 1865-6 to the design of Henry Richards Caselli, and of distinctive architectural character combining round arched windows of almost a Renaissance character, mediaevalising buttresses, and extremely chunky gable eaves of a domestic character, including square finials and raking brackets. It was established in 1861, the members and adherents were predominantly Welsh, the Welsh language was spoken freely and there were regular services in Welsh.Digital photograph of ta stained glass window in the Carmel Welsh church, Sebastopol.In memory of the Welsh miners who from the darkness of the mines brought the light of Christ to Carmel.carmel welsh church, sebastopol, church, henry richards caselli, welsh, stained glass, welsh miners, poppet head

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s.A large metal rake with a wooden handle. The head 67 centimetres across two centimetres wide and one centimetre wide. attached to it are 12 square tines that are one centimetre square, tapering to half a centimetre and are five centimetres long. It has some yellow paint on it. The wooden handle is 144 centimetres long and three centimetres diameter. Two thin strips of two centimetre wide thick wire have been added. Part of the Harris Collection.harris collection, large rake

Bushfire perimeter rather than bushfire area is the main control problem for firefighters on the ground. A conundrum rapidly compounded by spot fires. A small 5 ha fire can be nearly 1 km around the perimeter. That's a long way to build a control line by hand in rough bush. Dry firefighting techniques by hand were mostly confined to “knocking down” or “beating out” the flames, as well as "digging out". Digging or raking a “mineral earth” trail down to bare dirt proved most effective in forest fuels which, unlike grass, tend to retain heat and smoulder. Early tools were whatever happened to be close at hand. They were simple and primitive and included shovels, slashers, axes, hoes, beaters and rakes. A cut branch to beat the flames was often the only thing available. Farming and logging tools, developed over centuries of manual labour, and readily available at local hardware stores came into use, but little thought was given to size, weight, and balance. This leather beater was based on a century-old stockman's design which used green cow hide leather lashed to a broom handle. It's recommend that users lift no more than above knee height to conserve energy and let the beater to the work. For years foresters experimented with combination tools. In about 1952 fire beaters and other implements were being replaced with Rakuts and later RakehoesEarly firefighting toolBushfire beater - Leather with wooden handlebushfire, forests commission victoria (fcv)

26 colour photographs of 2 Japanese Exchange Students taken in the 1980's. Some scanned. (16) The 2 students sitting under the Ficus obliqua , Azalea lawn. (22-24) In the Sunken Garden. (18,21) In the Rose Garden. (3-5, 7-8, 10, 19) Using the Ride-on mower. (6, 9, 11-14) Stacking tiles. (17) In the Herb Garden. (25) "Maintenance- a necessary skill." (15) Raking leaves in the Ornamental Garden. (26) Learning about maintenance of machinery.sunken garden, rose garden, ride-on mower, stacking tiles, herb garden, raking leaves, ornamental garden, maintenance, machinery, japanese exchange students, exchange students

Bushfire perimeter rather than bushfire area is the main control problem for firefighters on the ground. A conundrum rapidly compounded by spot fires. A small 5 ha fire can be nearly 1 km around the perimeter. That's a long way to build a control line by hand in rough bush. Dry firefighting techniques by hand were mostly confined to “knocking down” or “beating out” the flames, as well as "digging out". Digging or raking a “mineral earth” trail down to bare dirt proved most effective in forest fuels which, unlike grass, tend to retain heat and smoulder. Early tools were whatever happened to be close at hand. They were simple and primitive and included shovels, slashers, axes, hoes, beaters and rakes. A cut branch to beat the flames was often the only thing available. Farming and logging tools, developed over centuries of manual labour, and readily available at local hardware stores came into use, but little thought was given to size, weight, and balance. This canvas hose beater was based on a century-old design which used lengths of canvas fire hose rivetted together and lashed with wire to a broom handle. The hose was be soaked in water to improve its effectiveness. If the flames were more than a metre or so the user was generally not able to get close enough to extinguish the fire It's recommend that users lift no more than above knee height to conserve energy and let the beater to the work. For years foresters experimented with combination tools. In about 1952 fire beaters and other implements were being replaced with Rakuts and later RakehoesEarly firefighting toolBushfire beater - Canvas with wooden handleR P PWD (Public Works Department) The handle has painted markings which indicate which FCV District it belonged to.bushfire, forests commission victoria (fcv)

Cordite Wagon - 18½-inch (460mm) gauge wagons came from the Commonwealth Explosives factory at Maribyrnong in Melbourne’s western suburbs. Both have gun-metal wheels, as avoiding sparks was understandably a priority in an explosives factory. Both wagons also have water tanks to drip water on the wheels as an added precaution. Cordite, an explosive used in artillery, was manufactured and pressed into thin sheets, which still contained a quantity of acetone solvent from the manufacturing process. The sheets of cordite were laid in racks of perforated trays in the cordite wagons, which were hand-pushed to the cordite drying-house where the trucks were coupled together in rakes and warm air was blown through them. The acetone, being very volatile, was evaporated out of the cordite and recovered to be re-used in the manufacturing process. Historic - Industrial Narrow Gauge Railway - Commonwealth Explosives factory, Maribyrnong, Victoria, AustraliaCordite Wagon - Rectangular yellow wagon made of wood and brass with aluminium traysThe number 77 is on the endspuffing billy, wooden wagon, 18½-inch gauge, explosives, maribyrnong cordite factory, maribyrnong explosives factory, puffing billy museum, industrial narrow gauge railway

These hand tools are examples of early to mid-20th century garden cultivators, designed for home gardening, small-scale agriculture, or kitchen gardens. Their full-metal construction suggests they were built for durability and could be used in tough soils where wooden-handled tools might break. The minimalist yet practical design would have made them ideal for weeding, soil aeration, or root work in garden beds. Such tools were commonly found in household sheds and were often homemade or locally manufactured by blacksmiths or rural toolmakers. – Roy SCHMIDT resided with his siblings Mabel and Jack at ‘Parklands’ 85 Lake Avenue Natimuk home of Heinrich Friederick ‘Heiny’ & Minna Christina SUDHOLZ nee LANGE and their children Louis, Sophie, Alma, Lena (Roy's Mother), Florence 'Florrie' and Edward ‘Ted’.The image shows two vintage hand garden forks or cultivators, each constructed entirely from metal, including coiled wire handles. The implements are similar in size and style, but differ in tine configuration: [1] Handmade Garden Fork Straight Prongs: Has five straight, flatter tines, more like a rake, and is better suited for fine cultivation, weeding, or breaking up soil clods. [2] Handmade Garden Fork Claw Prongs: Features three thick, curved tines arranged in a spiral and claw-like fashion. These tines are more widely spaced and likely used for loosening tough or compacted soil, or for aerating.gardening

100 plus years old, original owner Hughie H BothnaughtThirteen tools and two textiles displayed on two pieces of white backing board hinged together.'SHIPWRIGHT CAULKING TOOLS,' Individual labels are also included (from top) Oakum, Shipwrights caulking mallet, caulking cotton, raking tool, No.1.5 off set caulking iron, busting iron, no. 2 off set caulking iro(n). (Bottom board from left) Caulking iron no.3, Feeding iron, caulking iron no1 off set, caulking iron no1.5, caulking iron no.2.5, feeding iron, caulking iron no.2, feeding iron.

A scythe is an agricultural hand tool for mowing grass or reaping crops. It was largely replaced by horse-drawn and then tractor machinery. A scythe consists of a wooden shaft and a long, curved blade is mounted at the lower end, perpendicular. Scythes always have the blade projecting from the left side when in use. Mowing is done by holding the handle , with the arms straight, the blade parallel to the ground and very close to it, and the body twisted to the right. The body is then twisted steadily to the left, moving the scythe blade along its length in a long arc from right to left, ending in front of the mower, thus depositing the cut grass to the left. Mowing proceeds with a steady rhythm, stopping at frequent intervals to sharpen the blade. The correct technique has a slicing action on the grass, cutting a narrow strip with each stroke Mowing grass is easier when it is damp, and so hay-making traditionally began at dawn and often stopped early, the heat of the day being spent raking and carting the hay cut on previous daysEarly settlers and market gardeners used these scythes as they established their farms in Moorabbin Shire c1880A large metal scythe with a wooden handle x 2early settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, tools, blacksmiths