This particular small ice chest was once part of the domestic furniture of Dr W.R. Angus and his young family in 1927 when they lived in the Nhill and Ballarat districts. The family relocated to Warrnambool in 1939 and brought the ice chest with them. An ice chest, also called an icebox or refrigerator, was invented by Thomas Moore in 1802 and had become a common home appliance from the mid-1800s until around the 1930s, when electric refrigerators became affordable and safe. The non-mechanical ice chest allowed perishable food to be kept fresh for longer than the food-safe or ‘Coolgardie’ used in colonial days in Australia. It required the use of ice blocks, which were delivered to households by the ‘iceman' and his horse and cart. The ice man would use an ice pick to cut the blocks into the right size for the buyer’s ice chest. The ice came from an ‘ice house’, a factory where the ice was made. The ice chest required a block of ice to be placed into the insulated top section on top of the corrugated iron stand. The ice would cool the air and the cool air would flow downwards through the oval hole under the stand and into the refrigerator compartment below. The water from the melted ice would drain from the sloping floor of the top compartment and into the hooded pipe. The pipe went through the refrigerator and ended below its floor, where the drained water would be collected in the metal bowl placed there for that purpose. The lip on the bowl allowed it to be easily removed and emptied at regular intervals before it overflowed. W.R. Angus Collection- The W R Angus Collection spans from 1885 to the mid-1900s and includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. He and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Dr Angus and his wife were very involved in the local community, including the early planning stages of the new Flagstaff Hill, where they contributed to the layout of the gardens. Dr Angus passed away in March 1970.This ice chest is significant for representing a method of refrigeration and food preservation used in the 19th to mid-20th centuries when people were beginning to afford powered domestic refrigerators. After the second world war, most households replaced their food storage cupboards and ice chests with refrigerator appliances. The ice chest is also significant for its connection with the domestic furniture of Dr W.R. Angus and his family, and its inclusion in the W.R. Angus Collection.Ice chest; single front wooden cabinet with two doors and a flap, and three accessories. The top door is a lid with a metal handle at the front and two metal hinges along the back. The front door has two metal hinges on the right-hand side and has a metal lever catch. A hinged flap fits between the front legs at bottom of the ice chest and swings upwards. The front legs have wheels. The insulated top compartment has a metal lining and its floor slopes towards the centre of the back wall. In the floor are a formed oval air-flow hole and the open end of a pipe that has a hood partly covering it. The front compartment is an insulated metal-lined cupboard with a vertical pipe down the centre of the back wall and horizontal rails in the centre of each side wall. The accessories are a rectangular corrugated iron stand, a rectangular wire grid shelf and a round aluminium bowl with a lip and two sides pushed in. The ice chest was made circa 1927 and is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, dr roy angus, dr ryan, doctor angus, dr angus, ice chest, ice box, antique, food preservation, refrigeration, domestic equipment, kitchen appliance, refrigerator, non-electric refrigerator, non-mechanical refrigerator, w.r. angus collection

Fitted bodice with 1.5 cm deep stand-up collar. Long curved sleeve, tapering at the wrist, has a fine piping around the armhole. Wrist is trimmed with a piped, plain silver peaked false cuff, and two 3 cm deep pleated and piped ''frills''. Three covered buttons trim the diagonally cut decorative cuff. One metal hook, and hand stitched loop on the stand-up collar. 23 covered buttons ( one missing,others in various states of disrepair) extend from the neckline to the lower skirt. Front skirt is trimmed with a 7 cm deep band of plain silver silk, bordered by the striped fabric piping, and a 3 cm deep pleated frill on either side. Below this is a 25cm deep band of the striped fabric, at the lower edge of which are sewn four X 5 cm deep bands of pleated frills. At the centre back neckline are two X 20cm ''tails'' curved at each end and lined in plain silver silk. These are to be wrapped around the neckline, and fastened with a metal hook and eye, to form a 4cm deep rounded silver collar. Skirt back extends into a 34cm deep train. Brown cotton tape binds the hemline. Front of skirt is ruched from the centre buttoned section, in three sections either side, to the centre back panel, which is pleated, and extends into the train. Back waistline is trimmed with a 14cm wide bow, striped fabric, lined with plain silver fabric.A 7cm wide, and 34 cm long loop is stitched into the centre back seam, presumably used to hold, and lift the train above the ground. (The ends of the bow are trimmed with 10 cm deep black and silver fringing.) One metal ''bone'' in left front dart(now causing damage). One tiny 5.5cmX5.5cm shield shaped pocket on left front. Dress fully lined with cotton fabric.costume, female, victorian silver striped long silk dress

End of WW1 1917 -1918 - Family lived in Fisher Street. copies of 18 B/W Photos taken in yard near fence line of Path some have Peppercorn Tree. Family with pet dogs. Most men have Poppy on lapels. Geoff Bullock purchased Glass Slide Photos in garage sale in Fisher Street Stawell in early 2000'sThree people stand on a path, with a fence behind, two men, one either side of a woman, the man on right holding a pipe.

B&W photo of Percy Johns, an unknown woman and a farm worker during potato digging at Glen Park Farm, Selby, in the 1930s. Percy Johns stands on the left, wearing a dark hat, jacket with deep pockets, and pants. He is holding a shovel in his right hand, and his left hand is on his hip. Beside him is a young unidentified woman with dark hair, who is wearing a loose dress with a drop waist. Beside her is an unidentified farm worker, wearing a hat, dark waistcoat and pants, and pale shirt. He has a pipe in his mouth. They are standing between rows of potatoes. On the left of the photo there is a row with potatoes lying on the ground. There are at least eight full bags of potatoes in the field. Behind the trio is what appears to be the cypress avenue running down to the homestead out of range on the right of the photo.

.1) Hinged lid wooden box with brass fittings and green felt covered rests inside. .2) "Fuller" type circular slide rule calculator Model No. 1. .3) Brass stand which slots into one end of box and holds calculator in position for ease of use. .4 ...7) Instruction booklets for operating the calculator. .8) Letter from importer re enquiry for circular slide rules to be used at Thompsons Engineering and Pipe Works.Imprinted on bakelite base of cylinder "Stanley / Trade Mark".trades, drafting, instruments, measuring

Lid for ship's tanks used for early domestic water storage (1860's) at the lightstation The water tank and lid are probably from the same unit that was used for transporting drinking water or perishable dry goods on ships. The unit comprised a large, riveted metal tank which was fitted with a heavy cast iron round lid to form a hermetically sealed container. It had a rubber sealing ring ‘which was screwed tight with the aid of lugs cast into the lid and wedges cast into the rim of the loading hole’. A raised iron rod welded across the outer face of many lids allowed for screwing the lid tight. Ship tanks were invented in1808 by notable engineer, Richard Trevithick and his associate John Dickinson. Their patent obtained the same year described the tank’s superior cubic shape that allowed it to fit squarely as a container in ships and thus use space efficiently, while its metal fabric preserved and secured its contents, whether liquid or solid, from damage. The containers revolutionised the movement of goods by ship and made wooden casks redundant. Research by Michael Pearson has determined that they were carried on passages to Australia from at least the 1830s, conveying ships’ victuals and water storage as well as general goods heading for the colonies, and by the 1870s they were in common use. Once in the colonies, the tanks were often recycled and adapted for many resourceful uses such as water tanks, packing cases, dog kennels, oil containers and food stores and this invariably led to the separation of the lid and tank. Raised lettering on the lids indicates that nearly all of the ship tanks transported to Australia came from London manufacturers, and it was usual also for the brand name to feature as a stencil on the associated square tank but in most cases this eventually wore off. It is not known if the Wilsons Promontory tank retains its stencil, and the heavy lid will need to be turned over to reveal its manufacturer’s name. How it came to the lightstation is also not known, but it was either brought to the site as a recycled tank or salvaged from a shipwreck. Pearson writes that Ship tanks show up at a wide range of sites, many of them isolated like lighthouses. They were, I think, usually taken there for the purposes they filled, usually water storage, as they were readily available, relatively light to transport, and probably very cheap to buy as second‐hand goods containers. In rural areas they may have been scavenged for their new uses from local stores, to whom goods were delivered in them. Recycled to serve as a water tank, the Wilsons Promontory tank is the last surviving example of several that were used at the site to hold water for domestic consumption. The tank has had its lid removed and a tap fitted to the one of the sides. It stands on concrete blocks next to a building to receive water running off the roof via a metal pipe. Wilsons Promontory is the only lightstation managed by Parks Victoria with a tank container, although Cape Otway and Point Hicks have lids. Parks Victoria has identified four other lids which include two at Point Hicks, one manufactured by Lancaster and Co. the other by Bellamy. Cape Otway also has two, one unidentified and the other by the Bow Tank Works, East London, which produced tanks between 1910 and 1930. Pearson notes that ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’. The tank and lid, which are possibly part of the same unit, have first level contributory significance for their historic values and rarity. Round ship's tanks lid, iron.

The design of the uniform with its silver, diamond shaped buttons with the Scottish thistle symbol on them, indicate that the uniform was made for a Scottish Pipe Band member. There may be a connection with the local Warrnambool and District Pipes and Drums Inc, which began as the Warrnambool Pip Band in 1906, formed with the purpose of popularising Scottish music. Those with uniforms wore the Gordon tartan. In 1946 the uniforms were changed, with the Cameron or Errcht tartan chosen for the uniform. The Band now wears the Anderson tartan. The maker, David Lack Pty Ltd, advertised as a uniform specialist. In 1941 the business was located at 35-37 Little Latrobe Street, Melbourne. In the same year the firm won a contract with the Commonwealth Government Department of Supply, providing blue trousers for the Department of Air. In 1946 a branch of the firm operated in Myrtleford, Victoria. The Elizabeth Street, Melbourne, branch provided new uniforms in 1948 for the Leeton District Band. In the 1950s and 1960s David Lack manufactured blazers for the Olympic Teams as well as for bowls teams and schools. The Broken Hills Cameron Pipe Band' was gifted with uniforms that were also made by David Lack. It was a "... a Cameron of Lochlel red kilt and plaid, with black doublets and cross belts, and silver trimmings.” [Barrier Miner, Broken Hiss, 15-03-1954].The pipe band uniform jacket's design is associated with traditional Scottish pipe bands that originated in the United Kingdom and continue to this day in Australia and even locally in Warrnambool since 1908. The maker, David Lack Pty Ltd, is renowned as the maker of good quality uniforms who has supplied many government contracts for clothing and uniforms since the early 1940s. Uniform tunic; red jacket; Scottish Pipe Band Doublet with silver braid and silver diamond-shaped button closure and decoration. The buttons have the Scottish thistle symbol on them. There are seven buttons on the tunic front, three on each skirt flap, three on each contrasting black cuff and one on each black epaulette. The tunic has a two-inch stand-up collar. The whole item is fully lined with black nylon/silk blend fabric, the shoulders are padded, and there are pockets under the front skirts. There is an inscription on the maker's sewn-in label. Made by David Lack Pty Ltd, a uniform specialist in Melbourne.Label "David Lack Pty Ltd, uniform specialist Melbourne. "flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, uniform, tunic, dublet, jacket, scottish pipe band, pipe band, david lack pty ltd, david lack melbourne, uniform specialists, david lack, diamond buttons, silver buttons, scottish thistle buttons, scottish piper's buttons, thistle, scottland symbol, pipe band uniform, bag pipes