Set of eight black and white photographs taken towards the end of the SEC operations, by an unknown photographer possibly an SEC crew member. .1 - Western part of front of depot with scrubber on 0 road and single trucker on 3 road. .2 - Eastern part of front of depot with single trucker on 3 road. .3 - 26 at Lydiard St. North terminus with cemetery building in background. Tram has the destination of Sebastopol. .4 - ditto .5 - 43 at Sebastopol terminus. Tram has the destination of Lydiard St. North .6 - ditto .7 - Saloon door with glass engraved "Prahran & Malvern Trust" .8 - Rear portion of bogie tram at Sturt and Lydiard St. with another arriving in the distance.On rear of all pics in pencil "32"tramways, trams, depot, lydiard st north, sebastopol, tramcars, tram 43, tram 26

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "VICTORIA PARK LOOP / CARLTON ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The top line of words has a reddish paint inlay. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CAR SHED LOOP / MACARTHUR ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The stamped area appears to have been polished compared to the others. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, 4496 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Yields information about the opening of the Geelong tram system and the events of the day, including the respective mayoresses driving decorated trams.Black and white reproduction photograph of a page from the Now Magazine, 18.1.1912 issue featuring photographs of Geelong and in particular a photograph of Geelong No. 4 on a trail run, 10.1.1912, at 5am. Photo credited to W.H. Watts. Image 1 - Copy 1 - has the reproduction of part of the page. Image 2 - Copy 2 - part print of the page, featuring the tramcar - printed on Hewlett Packard paper.Copy 1 - "10)2" in the top left hand corner, a William Scott address label on the rear in ink "10) middle pic car 4". Copy 2 - a William Scott address label on the rear and "10)" trams, tramways, geelong, first tram, testing, commissioning, tram 4

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CARLTON ST HADDON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "DARLING ST LOOP RUBICON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.Ballarat Tramways Section Staff Darling St Loop Rubicon St Looptrams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "URQUHART ST LOOP TO GREY ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "PLEASANT ST TO CARLTON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures. Demonstrates what can happen in use - has been run over by a tram - possibly being exchanged on the move or some other story.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "STURT ST RUBICON ST " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The staff has been run over by a tram and had the last part of the object cut off. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.Ballarat Tramways Section Staff Sturt St Rubicon Sttrams, tramways, staff, safeworking, tramway staffs, sec, signals

Yields information about the recovery of ESCo 12 by the BTM in 1990 and has a strong association with the people involved in the project.Set of 14 prints with digital images of the removal of the building around ESCo No. 12 at Nerrina on 3-11-1990. Scanned from original prints loaned by Carolyn Cleak (Dean at the time). Printed on Agfa paper. Originals of prints later found in a depot drawer. .1 - Commencement of the removal of the metal deck roof - David Tidy. .2 - ditto with the front of the tram showing and the building itself. .3 - Roof removal continuing - Len Millar .4 - The house from the north side. .5 - Photo of interior notice to Passengers re weekly tickets etc. .6 - as for .4 .7 - Photo of the interior number of the tram. .8 - as for .6 .9 - detail of linking in side at the saloon corner. .10 - close up of the tramcar number. .11 - close up of "Please have Exact Fare Ready sign" .12 - View of the tram after the roof and some of the sides removed. .13 - ditto, ready for removal .14 - detail of lining in the upper part of the saloon panel. Close up of post in image 13, added 22-12-2018 - see i15 All have on the rear "158.7 3.11.90" in ink on the rear.trams, tramways, esco, recovery, nerrina, acquisitions, notices and information, tram 12

Part 1 - Ballarat Horse Trams - notes that much of the details was supplied by the late Inspector James. Part 2 - Electric Trams - gives dates for the withdrawal of the ESCo cars, routes, SEC and extensions, including the Forest City signals. Notes assistance of Mr Hornabrook, Farr, Linaker, Hodgson and Lyons. See also Reg Item 8005 for another copy and a set of A3 size laminated photocopies.Yields information about the history of the Ballarat tramways as researched and known in 1953 by Wal Jack.Photocopy - 11 pages of a typed article or research report on foolscap paper titled "History of Ballarat Tramways - 1887 - 1953", written by Wal Jack. Second copy - Gestetner printed - 10 pages only, from a donation of Ruth Nelson - rescanned with word recognition pdf. Last page scanned and added to this file, but may not be word recognisable.In pencil on the last sheet "The original of the information was loaned to me to have this copy made by Mr. W. L. Edwards of Beverin St Sebastopol 3356 - copy made 23/5/1972. Second - copy some dates on front sheet circled and paragraphs highlighted on other pages.trams, tramways, sec, esco, ballarat, sec, horse trams, tramcars

Yields information about the type of trams provided during the later part of SEC operations in Ballarat, times out and times in for specific runs.Typed, carbon copy, Foolscap sheet giving the run number, times out and the type of tram, times in and changeovers between bogie and small trams for Weekdays, Saturdays and Sundays. Has initials LJD: JG and date of March 1970 in top right hand corner. 2nd copy added 3/1/2020trams, tramways, timetables, sec, ballarat, tramcars