This 1871 coffin top Singer sewing machine was purchased third hand by a member of the Giles family in 1922. Its box-type lid was often used as a stool. It is now part of the Giles Collection. There are many 19th century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. These items mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton), whose photos are in the parlour. They married in 1880. Henry Giles was born at Tower Hill in 1858. He was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. The Giles family collection has social significance at a local level, because it illustrates the level of material support the Warrnambool community gave to Flagstaff Hill when the Museum was established. Singer sewing machines with a rocket bobbin system are rare.Singer treadle sewing machine, "coffin top" circa1890'. Singer Manufacturing Co. made in 1871. Machine has one drawer each side and a pull out drawer across the front. It has a rare Rocket Bobbin. The cover is separate to the cabinet. It is part of the Giles Collection." Singer Manufacturing Co", "No. 9073814"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, giles collection, henry giles, tower hill, cooramook, warrnambool breakwater, mailor’s flat, wangoom, singer manufacturing co., 1871 singer coffin top sewing machine, treadle sewing machine, dressmaking, sewing and mending, domestinc equipment, coffin top, 1871, 9073814, rocket bobbin

This clock was brought out to Australia in 1849. it was then bought in Ballarat by Samuel Richardson in 1865 and brought to Orbost when he settled there. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. This clock may have been used as a marine clock. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. A wooden mantle clock in a rectangular cabinet. It has pendulum striking. The face has blue and gold decorations. the numerals are Roman. The face surround is white and the numerals black.There is a glass door with red,blue and green decorations on the lower quarter. There is a faded printed label behind the clock and pendulum.Scratched onto the back: "To Australia in 1849. Samuel Richardson bought this clock in Ballarat1865"

Wooden cabinet with wire mesh inserts on sides and doors. Swivel door with latch at the top and three shelves. Polished pine body with rough sawn timber back. A raised surround on three sides of the top. Evidence of a latch hook on left hand door and keyhole on right hand door. uebergang, allansford, food safe, food storage

The Victorian Parliament will hang portraits of two female members of parliament, Lady Millie Peacock, first woman to be elected to the parliament, and Pauline Toner, first woman cabinet minister. and local member. Black and white text, two photographspauline toner, victoria parliament, millie peacock

Written on back of photograph, "Safeway has two self-service delicatessen and small-goods sections. Both use Tyler cabinets. Above is the larger of the two displays." Stamped on photograph, "Please quote No. MA6939 when ordering Laurie Richards 48-1528".

Sister Gibbs is liaising with Dr. Gibbs to discuss his patients who are attended by RDNS.Liaison had occurred between doctors and the Trained nurses of the Melbourne District Nursing Society (MDNS), from its inception in 1885. This increased when Midwifery was introduced in August 1893 with close liaising with the Women’s Hospital. As District nursing grew it was recognized that closer liaising between many Public Hospitals would be beneficial, for not only the MDNS, later called Royal District Nursing Service (RDNS), Sisters, but also for the patients and the hospitals. In August 1964 a Liaison Officer commenced at the Alfred Hospital. This soon increased to Liaison Officers working full time at several Public Hospitals. At the time of a patient’s discharge, the Liaison Sister forwarded information on their diagnosis and instructions regarding the care required at home to the appropriate RDNS Centre, and in turn the attending District Sister wrote a report of progress and any queries to the hospital doctor, via the Liaison sister, at the time the patient was attending outpatients. Any new instructions were then sent back to the District sister. Liaising also occurred between District field staff and Doctors when patients were referred by General Practitioners and did not attend a hospital.On the left of this black and white photograph is Sister Melanie Gibbs of the Royal District Nursing Service (RDNS). To her right is Dr. L.B. Witts who is wearing glasses; has short dark hair and is wearing a grey suit, white shirt and dark tie; he has a stethoscope around his neck with the end on his lap. He is sitting 'side on' at the end of a low cabinet with three drawers seen.and is turned toward Sister Gibbs. His right arm and hand are resting on an open book on the top of the cabinet. Sr. Gibbs, who has dark curled hair, is wearing her grey RDNS uniform coat with the RDNS insignia on the upper sleeve, and peaked hat. She is seated 'side on' in the photograph facing Dr. Witts. Her dark leather rectangular shaped case, with RDNS written in the top third, is resting on Dr. Witts' low cabinet. On the left in the background sit a set of four light grey metal drawers above a set of dark drawers and part of an open Venetian blind over a window is to the right.Photographer's Stamp. Quote No. HN 47melbourne district nursing society, mdns, royal district nursing service, rdns, patient care, rdns liaison, sister melanie gibbs, dr l.b. witts

Cabinet portrait of Victorian Lady seated with sheet of paper in hands. No inscriptions on reverse. Unframed in album. Possibly a member of the Opie/Dower/Martin/Adams family formerly of Castlemaine/Maldon/Mt. Pleasant areas. Originally from Cornwall. Photograph c.1880's./Bartlett Brothers -Sandhurst photoBartlett Bros., Sandhurstphotograph, portrait, female, cabinet portrait of victorian lady, bartlett bros. sandhurst, opie, dower, martin, adams

An item forming part of a collection of costumes, photographs and documents relating to the Weir family who lived in a mansion, originally named Illapa, at 84 Princess Street, Kew, from c.1917 to 1950. This historically significant collection includes items relating to both George Weir (1866-1937), his wife Edith Mary Weir (1867-1948) and their children. George Weir attained national prominence in the mining industry, becoming General Manager of the North Broken Hill Silver Mining Company in 1903 (later renamed North Broken Hill Mining Company 1905-12, and North Broken Hill Ltd 1912-1988), and subsequently President of the Mine Owners Association. He was to remain General Manager of North Broken Hill Ltd until his retirement in 1926.Studio portrait of George Weir in cabinet card format. The photographer was G. F. Jenkinson of Areas Photo Company of Argyle Street, Broken Hill. An inscription on the rear of the photo identifies the date when the photo was taken: 9 June 1888. This was three years before his marriage to Edith Betteridge."9-6-88 / George Weir"george weir, broken hill, north broken hill mine

Information from Norman F. Dalton: Ballarat had a reticulated DC supply in the early part of last century and in 1905 had sufficient generating capacity to enable the trams to be changed from horse drawn to DC electricity. The use of electricity increased with the main power station located on Wendouree Parade, near Webster Street, under the ownership of The Electric Supply Company of Victoria. AC generating plant was installed in 1925 and conversion to AC proceeded. In 1934 the company was taken over by the State Electricity Commission Victoria (SECV) and more AC generation was installed and the changeover of customers was accelerated. This is around the time that the Synchronome Frequency Checking Mast Clock was installed at the Wendouree Parade Power Station. The SECV Annual Report of 1921 states: ::Section 11 of the act directed the COmmission to enquire into the question of securing the adoption of such standards of plant and equipment of a system, frequency and pressure for the generation and distribution of electricity as will admit of the efficient interconnection of undertakings throughout the State. In 1934 when the SECV took over the Ballarat operations the question of linking with the State grid had been a planned operation for some years but due to financial considerations had hindered it and in fact would continue to do so for a further 10 years. So while the need for close frequency control for interconnection was hardly an issue, the need to keep electric clocks correct was important, particularly as this item was a frequent sales point to cover the inconvenience and sometimes expense of converting from DC to AC. The clock is a very accurate pendulum clock with provision for varying effective length during operation for precise time regulation. There are two normal time dials and one is controlled by the pendulum and the other is operated by the system frequency. When the clock was in use it was installed by the MEter and Tests Laboratory and the time was checked daily by radio time signals. The two dials were repeated in the operators control panel in the Power Station. A maximum deviation between the two dials was set in the operating instructions (eg 5 seconds) and the operator would correct this when necessary by remote manual alteration of the turbine governor set point. The clock was used to drive and regulate a system of "slave" clocks which were used to display the time in various locations around the power station. A slave clock is a simple clock which is driven by a small electric motor, its accuracy is regulated by the master clock every 30 seconds to ensure that it and all the other slave clocks in the station are on exactly the right time; slave clocks were placed in various locations, from common rooms to workshops. A master clock could potentially run thousands of slave clocks at one plant. The clock also contains a rectifier. A rectifier is a device that is used to convert AC power to more stable DC current.Two clocks in a timber case. Both are electric, one is powered by the main pendulum mechanism, the other is a self contained electric clock. The main mechanism is of the gravity arm and roller type, which sends an impulse to the slave clocks every 30 seconds. The This Synchronome Frequency Checking Master Clock was used at the Ballarat Power Station. Below the main section of the case is a smaller cabinet containing a rectifier to provide consistent DC power for the clock. The rectifier was made by the Victorian company Hilco, which was located in Burwood. There is a high chance this is not the original rectifier from this clock as there appears to be brackets to hold a larger device in the space the rectifier occupies.Front below main clock face on front of case: "Patented Sychronome Brisbane" Lower left-hand clock face: "Frequency time" Lower right-hand clock face: "Standard Seconds" Synchronous electric clock mechanism on door (Frequency time clock): >200/250 V. 50~ >"Synchronomains" Made in England >Direction indicator for clock starting switch >"To start move lever in direction of arrow and release" >"Patent applied for" Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for main clock face: >"English Made" >"Patented" >Serial number "8751" >0 above right-hand pillar on front-plate Inside case, back panel, top enamel plate: >Seconds Battery + Pos. > Battery Common or - Neg. >1/2 min dials Inside case, back panel, bottom enamel plate: external seconds dial Inside case, right hand side, electrical knobs: two switches, both "A.C. mains" Pendulum rod, below suspension spring: Serial number (?) 0000005 Rectifier in bottom cabinet: >"Hilco Rectifier" >"A.C. Volts 230/240" >"Model 1060/S" >"A.C. Amperes" >"Serial No. 1060/S >"Phases 1" >"D.C. Volts 6" >"C.P.S. 50" >"D.C. Amperes 1" >"Made in Australia by Hilco Transformers McIntyre St., Burwood, Victoria." Bakelite electrical plug: makers mark Lower cabinet, RH side panel, pressed tin plate: "AC" (upside down) Brass speed adjustment, outer right RH side: "S" and "F" Ivory and wood pendulum beat ruler: >Ruler, with 0 in centre and numbers 1-5 in ascending order from centre on left and right. > "Synchronome Patent." Steel plate, back panel, inside case, right hand side: >N R A" (descending) >"2191" serial number/part number Face of main clock: "Synchronome Electric" synchronome frequency checking master clock, electricity, state electricity commission, wendouree parade power station, secv, clock, time, pendulum, electric supply company of victoria, norman f. dalton, ballarat power station, rectifier, slave clock

Slide. Bendigo Views. View of a loungeroom. It has a small bookcase with photos on it and a shelf above it with a black mantle clock and a photo on it. There is more shelving with books, photos and a model of a sailing boat on it. There is a cabinet with model aeroplanes, ships and a coach in it. On the top is a larger model of an aeroplane. There are more pictures on the walls. There is a television in front of the bookcase.slide, bendigo, bendigo views, bendigo views

Black and white photograph of attendees at the State Cabinet Meeting held at City of Nunawading on 9th February 1981.|L - R: Don McKinnon, MLA, Member of Box Hill| The Mayor - Cr W.B. Renfrey| The Premier - The Hon. R.T. Hamer, ED, MP| John Richardson, MLA, Member for Forest Hillvictoria. state cabinet, mckinnon, don, renfrey, will b., hamer, rupert j. sir, richardson, john

This wall section was part of the original Warrnambool Lighthouse Keeper's Assistant's Quarters built in the late 1800s. The frame was found in 2023, when the non-heritage cabinets built in the 1970s were removed as part of conservation works.The wall section is significant for being part of the original Warrnambool lighthouse keeper's quarters on the western wall. It is an example of the building materials and methods used in the late 19th and early 20 centuries.Wall frame section; a sample of the original inner western wall frame from the Warrnambool Lighthouse Keeper's Residence, Assistant's Quarters. Vertical timber slates of uneven size are fixed with short flat head metal nails to more substantial upper and lower horizontal rails. There are remnants of a sand and clay-like mortar between and in front of the slats. There are two spacers n the rear of one of the rails, made of timber and fixed with thick square handmade nails; the timber of one is rotting.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, warrnambool lighthouse keeper's quarters, 1800s wall lining

A female secretary sits at a typewriter with earphones on, attached to a dictaphone. In the background are filing cabinets, a typewriter and shelves. Whilst the person is unknown, from her watch, glasses and typewriter, she could be a sighted volunteer or staff member.Digital image of woman seated at a typewriterroyal victorian institute for the blind, employment

Dark blue Invicta Minute book containing the Minutes of the The Commercial Egg Producers' Association of Victoria Minutes from Sept. 2nd 1963 to 2/9/68. Also contains two pieces of paper with the names of delegates and Branch Members. Newspaper clipping in the front with the names of Members of State Cabinet, July 1964.business, retail, the commercial egg producers' assoc, the commercial egg producers' association of victoria collection, cepa minute book, bolton bros pty ltd, news paper clippings dated 1964

Small brown timber display cabinet with bifold hinged doors, contains a document from the Executive Council of the High Court of the Ancient Order of Foresters London giving dispensation to hold meetings in district of Sandhurst by the Brothers of the Bendigo Branch. Names of P.C.R's printed in gold on bifold doors range from 1862 to 1901.organization, club/society, ancient order of foresters

By its decision 3998 of 30 July 1984, The Australian Cabinet directed that there be a complete joint administration review of Commonwealth Topographic Mapping Resources and needs and the way in which those needs could be met. This is a Draft Report of that review.A photocopy of a 14 page, A4 Report, stapled top Left-hand corner. Some A3 folded Annexesroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr