When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Piece of pocket knife, metal, drilled holes. Artefact Reg No S/121. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, pocket knife

Star Drill. Large Metal Punch (Previously in Box #45 from Mechanics Institute Eaglehawk) Approx 30cmgold mining, miners' safety cage

Photocopy of photograph : machinery in corrugated iron shed. Printed on bottom of photo : View of 20 drill air compressor. .topic, mining, machinery

Olive green, cotton drill suit. Velcro at waist, chest pocket zips. Various pockets on legs and sleeves.Bruce C. starkey 1736666flying suit, dustoff

Possible used in the Borneo Malaya conflicts.Green cotton drill jacket, short sleeve heavily starched. Similar in colour to jungle greens worn in Vietnam.Colour patch Commonwealth Forces Japan and Malaya. Cloth Australia patch with QE2 Crown.

Dark green cotton drill jacket with marking over left pocket "US ARMY". (Thought to be issued for Vietnam)

Cyril Smith was a popular figure amongst his contemporaries and this has been recognised by the plaque from those who new him. Appreciation of fellow Legatees to a comrade. The plaque has sentimental value, the words, the time and effort to make it by fellow Legatees shows the high regard in which Cyril was held. Caricature and signatures on a piece of 3 ply wood, front varnished, rectangular shape. Hole drilled top centre.Handwritten message in black ink "Our Cyril.,Heres from every cobber who wore the old chapeau". A caricature of Cyril Smith engraved (burnt) into the timber. Signatures of many Legatees, signed in ink. Reverse side, "Cyril - From all old cobbers of Melbourne Legacy Club with happy memories Legacy. 1938." Handwritten in black ink "Mrs Cyril Smith gave me this plaque which I in turn now pass onto Legacy Comradeship for safekeeping. Frank Doolan June 1962"comradeship, cyril smith

Has a strong association with a BTM/BTPS volunteer - mid 1980's and the work to repair the main bolster on tram 661.Set of three colour prints showing the repairs to No. 661 bolster following extensive cracking in the bolster. Taken August/Sept. 1990 (661's book would show actual dates). Reported in the September 1991 issue of Fares Please! Printed on Kodak paper. .1 - Showing the drill in position to drill the 2nd of four holes. .2 - Drilling the second hole - Warren Doubleday .3 - Work complete with the bracket in position. See September 1990 Fares Please!repairs, volunteers, btps, bogies, tram 661

Breast drill No.905Made by Stanley, England.Stanley Englandstanley

Group photo of Australian Army Unit (unknown)Group photo taken in front of old drill hall which was located in the current Ringwood railway station car park

This clock face was recovered from the wreck of the Falls of Halladale. There were twenty boxes of clocks carried on the ship as cargo, destined for the ports of Melbourne and Sydney. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. Twenty cases of clocks were carried amongst the cargo of the Falls of Halladale, an example of the need for people in the early 20th century to have easy access to the current time. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject model is an example of an International Cargo Ship used during the 19th and early 20th centuries to transport goods around the world and represents aspects of Victoria’s shipping industry. Section of a clock frame, brass, with drilled holes and cutout shapes and an arched base. It was recovered from the wreck of the Falls of Halladale. flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, clock frame, russell & co., falls of halladale wreck, artifact, clock part, time keeper

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Piece of pocket knife, metal, drilled holes. Metal has a large nick on the edge. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, pocket knife

Metal clothing hook with decorative edge. Holes have been drilled top and bottom to allow fixing to a wall or cupboard.bendigo, gold mining, qc binks, qc binks

Metal clothing hook with decorative edge. Holes have been drilled top and bottom to allow fixing to a wall or cupboard.bendigo, gold mining, qc binks, qc binks

Single sheet of white paper, this is a copy of a letter sent to the Education Department in 1965 concerning the use of the Drill Hall sight.See JPG above.williamstown high school, 1965, drill hall, assembly hall, mr powell

7082a: - Induction fan discharge from the Stawell Gold MIne, this gunck would include the diesel fumes of trucks and mining machines. The steam Plume drifts over the nearby trees blackening and killing the. It also drifts over the reservior adding a touch of spice to the town's drinking water. site closed in 2001. Another fan is located near to Darlington Lane and McLennan Street.2 Photographs: 7082:Showing workmen drilling a shaft with a car in the background 7082a: Showing Steam? coming from the shaft.On Reverse: 7082 Mick Walsh 52 Patrick Street Phone 053 ******mining

Terracotta pot, similar to a flower pot but without a hole in the bottom. Has two small holes drilled in the top for it to be hung.ceramics, terracotta

Brown paper covered book. On front cover on a label: Mr. T. Chafer, Foreman Boiler maker, Workshop Manager, Bendigo Nth. Inside front cover on an attached flimsy copy is a list of rules for the workshop drill implementation. e.g leader to make a note of nature of work performed at each drill, signed H.L. Wignall, Ambulance Officer. Book contains names of each person who attended a particular drill session, e.g 13.4.56, J. Smith, H. Latimer, N. Henderson, R. Walls, L. Smart, Dave Brown attended a 'poisons' drill session. Dates from 13.4.1956 to 23.5.1978. Also, at intervals in the book, is a summary of sessions attended for each employee.bendigo, railways, bendigo railways

This tool is one of a collection of tools which are believed to have belonged to Henry Phillips. English-born carpenter, Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy before coming to Warrnambool where Henry formed a partnership with Christopher Beattie and established the undertaking firm of Beattie and Phillips in 1865. This firm continued on after the death of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics’ Institute. This tool is of interest, firstly as an example of a vintage tool and secondly as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a hand drill with a composite material handle at one end (for one hand) and a tubular metal piece at the other end for the insertion of a bit or drill. In the middle is a circular turning piece with metal spokes and a metal handle (for the other hand). The circular piece is held together and attached to the main body of the tool with several screws. vintage tools, henry phillips, history of warrnambool