Set of geological specimens on microscopic slides stored in wooden box with hinged lid, at least 1913.

Made from local BlackwoodCrystal wooden wireless with one valve amplifier. Two doors, hinged lid and five knobs.crystal receiving sets

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This ruler belonged to Louis Haeusler (b.1878) and is one of the many objects in the Haeusler Collection that represent home and farm life in early twentieth century Wodonga.This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Wooden fold out carpenter ruler with bendable brass hinges and imperial measurements engraved into the wood. Imperial measurements (inches) engraved on arms of ruler. carpentry, carpenter, woodwork, wood, ruler, building, diy, wodonga, farm, haeusler collection

Used within the Nicholls family.A wooden carpenter's ruler folds into four nine-inch sections with precision made brass hinges.Paper label inscribed 'Please keep. Donated by Harry Nicholls. woodwork, carpentry, rulers, measurement

Found in house in Princes Street, Port Melbourne.Small oblong metal matchbox. The hinged lid has the raised inscription Bryant & May, London. Bryant & May Londonbryant & may, matchbox

not knownThree foot rule, collapsible to nine inch. Metal ends and hinges. Hinge in centre 9inches from each end. Two small nails positioned at 14 and 22 inch marks and 10 and 26 inch marks to keep folded rule in place.school, equipment, instruments, measuring

Dr. Curt Schimmelbusch (1860-1895), a German physician, designed his original mask around 1889 while an assistant surgeon. Surgical assistants were often assigned the task of delivering the anesthetic. During anesthesia it was not uncommon for ether and chloroform to get onto the patient’s skin, causing irritation. Chloroform can even cause burn-like reactions. Schimmelbusch designed the rim of his mask so that both sides curve away from the patient’s face to form a kind of trough. He intended the trough-like rim to collect excess anesthetic that would otherwise have trickled onto the patient’s face. To anesthetize a patient, gauze was stretched over the metal bars and fastened in place by the hinge. The mask was placed over the patient’s nose and mouth, and the anesthetic was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. This type of mask is sometimes still used today for ether anesthesia in developing countries when other means are not available. (Wood Library Museum of Anesthesiology) This particular object is a modified version of Schimmelbusch's design, known as Chadborn's modification.Oval shaped chromium plated mask with two metal strips linked front to back and side to side to create a dome. An oval shaped mobile wire frame is attached to the lower part of the mask by a hinge at the back, approximately two inches from the lip of the metal handle. A "U" shaped bit of metal is attached to the front of the mask which acts as a clip to fasten the wire frame to the lower section of the mask.anaesthesia

Pen and pencil set presented to Flight Lieutenant Ian A. Lyons by Eaglehawk RSL on 14.11.1951. Part of the Flight Lieutenant Ian A. 'Joe' Lyons MBE Collection. See Catalogue No. 5374P for his service record..1) Blue coloured hinged presentation box with cream coloured padded lining. Brass hinges and clasp. .2) Navy blue bakelite fountain pen with gold coloured nib and cap. .3) Navy blue propelling pencil with gold coloured tip and cap..1) Printed in brown on inside lining: 'Onoto'. .2) Printed on navy blue shaft in red: ' M 9in a circle)'. Stamped on cap clip: 'TCR' Engraved on cap: 'To Ian from Ehk RSL 14.11.51" .3) Engraved on cap: 'To Ian from Ehk RSL'accessories, writing equipment, flight lieutenant ian a. lyons, memorabilia

Mask used for administering ether anaesthesia. This mask also has a carbon dioxide inlet tube. Carbon dioxide was found to promote deeper breather which assisted in attaining faster anaesthesia. The mask was designed by an American anaesthetist James Tayloe Gwathmey, (1863-1944). Gwathmey invented a range of anesthesia equipment. In 1904, he introduced this mask as one part of a resuscitation apparatus. Gwathmey modified an existing mask to more closely fit the contours of the face. The holes in the rim allow for oxygen to be delivered for resuscitation or for the delivery of a combination of oxygen and anaesthetic. Wire framed mask in tear shape. There is a hinged top bracket which allows for a piece of flannel or domette to secured to the mask, onto which the ether would be administered. There is an inlet tube near the hinged bracket to allow for the administration of CO2 or oxygen and the rim is pierced with holes.james tayloe gwathmey, ether, anaesthesia, anesthesiologist, carbon dioxide, oxygen

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Metal, brass and timber tripod structure with a channel or trough to support the rocket. It has a pendulum and dial to measure the height trajectory. Very long wooden box with hinged lid painted a green-grey colour with four brass hinges and two rusted metal hooks.

Strong large cane wicker baskets such as this one were used for storage and transportation. This basket could have been used for storing sails on a vessel, or sending luggage, parcels or goods by rail, ship, wagon or cart from one location to another. The basket would also be suitable for laundry in hospitals, factories such as woollen mills, and other organisations for storing and moving equipment and goods. The inscription " A A S" has not yet been researched. It could be the name of an Australian- Service, or a - - Ship or even the initials of a person. This basket is an example of a large, strong container used for storage or transportation during the 19th and 20th centuries.Basket, natural coloured woven cane or wicker, rectangular shape with lid. Two leather straps and buckles fasten the lid to the basket. The basket has a strong rope handle on each side, metal reinforcing straps that support three wood strengthening lengths on the top of the hinged lid. The lid is hinged to the basket at the back with metal hinges. The inside frame is reinforced with wood. There is a large inscription in black paint is stencilled onto the lid of the basket."A A S"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, basket, sail storage, maritime furniture, luggage, transport storage basket, wicker hamper, vintage wicker chest, wicker trunk, cane storage basket, dispatch basket, a a s

standard for all services in the 1950's and 1960's mass produced moulded tin.ear protection as issued to all personalKhaki painted tin, hinged lid written instructions in lid, diagrammatic instructions in base in black lettering.Protectors ear drum (aust.) MK1 M Large on outside of lid. For inscription of internal markings refer to photo's of inside of tin.ear plugs, ear protectors

The tins held various items from pencils, writing paper to tobacco and spices. The idea came from Princess Mary to get one to all Allied troops serving overseas. Item relates to Gilbert Turner MM, No 1410, 45th Batt AIF. Refer 1294P, 1039P, 1038. Princess Mary Christmas tin 1914, brass, lid is embossed with writing and an image of the Princess, hinged lid, "Imperium Britanicum Christmas 1914", "Japan, Russia, Montenegro, Serbia, France, Belgium"containers - commercial, xmas 1914, turner

Black & White cigarettes were produced in England, Virginia Tobacco, or Flue-cured tobacco, is named after the US state where it was first cultivated. It is also called ‘bright tobacco’ because of the yellow to orange colour it achieves during curing. It grows particularly well in subtropical regions with light rainfall, such as Georgia, Florida and the Carolinas in the USA, Southern Brazil and Zimbabwe. In Australia, blends are predominantly Virginia, for example, Dunhill and Winfield. Virginia blends contain only flue-cured Virginia tobacco A tin with a hinged lid for 'Black & White' Cigarettes. a black silhouette of a man in a top hat is the trade mark BLACK & WHITE / 'MARKOVITCH' / VIRGINIA / CORK TIPPEDcigarettes, tobacco, cheltenham, moorabbin, bentleigh, early settlers

A rubber stamp needs to be re-inked for each impression (not pre-inked).Used by the office staff of the SECV during construction of the Kiewa Hydro Electric Scheme.Slim tin case with hinge lid. Inside the lid is badly marked. The ink pad is deep blue.'Stevens Rubber Stamp Pad / Number Two' on the lid in blue. Inside the lid is the name of the companies but difficult to read.rubber stamp pad, stephens ink pad, office equipment

Desk wooden varnished dark stain with hinged lid set at angle and ornate machine turned legsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Spider Band, metal, circular with opening for bolt. Hinged with bolt & 2 protruding pieces each side.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Triangular base with hinged lid and clip, also a chimney for the smoke to escape. Very heavy. Wooden handle.T&C Clarke & CO. LTD Pattern on chimney No 6

Forceps for removing bladder growths, stainless steel with screw hinge and toothed closure adjustment, manufactured by Ramsay.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Owner of tools Jim Gillespie Clayton VictoriaBox wooden with hinged front opening secured with wire. Contains 19 caulking tools. Painted blackflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., they standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Porthole rim with the hinge and two flanged extensions. The ship's fitting was recovered from the wreck of the Falls of Halladaleflagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, porthole, porthole frame, porthole rim, ship’s fitting, brass porthole, reconditioned porthole, falls of halladale, russell & co.

Ansonia Clocks were made by a clock manufacturing business which started in Ansonia, Connecticut, in 1851 and which moved to Brooklyn, New York, in 1878. An enormously successful business, it turned out thousands of clocks in a large number of styles.This Ansonia clock was owned by the pioneer family in Moorabbin Shire c1900This Ansonia clock was owned by the pioneer family in Moorabbin Shire c1900A large ANSONIA clock. c1900 with a winding key and pendulum and a hinged front glass door with clip lock ANSONIAansonia clock company, connecticut, america, phelps anson, terry theodore, andrews franklin, brighton, moorabbin, furniture, pioneers, clocks, market gardeners, early settlers

A silver plated case to hold, and protect from crushing, cigarettes in a coat pocket. A cigarette is a narrow cylinder containing tobacco, that is rolled into thin paper for smoking. "Tailor-made" in relation to cigarettes means cigarettes that have been mass-produced in a factory and usually have a filter tip inserted at the mouth piece. 'Hand-rolled' cigarettes or 'roll-your-own'. were made by the person themselves by rolling thin paper around a pinch of loose cut tobacco. After World War 2 1914- 1918 tailor made cigarettes were mass produced in large factories and were inexpensive and easy to obtain world wide. Residents of City of Moorabbin used a cigarette case like this to carry their tailor made cigarettes in their coat pocketsc1950 A silver plated cigarette case with spring hinge and metal strip inside case that holds cigarettes in place early settlers, market gardeners, silver smiths, jewellers, cigarettes, tailor made cigarettes, craven a cigarettes, phillip morris pty ltd, post world war 2 estates, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,

Used by Harry Jenkins/Margaret Campbell when Churchill Island was run by them as a shorthorn dairy farm.17lb metal cream can, surface rust. Hinged lid with handle. 1 handle either side.Side: "E H JENKINS CHURCHILL ISLD" Top of lid: "E H JENKINS" on one side, "CHURCHILL ISLAND"/"1612" on other side.churchill island, cream can, dairying, jenkins

Spices were used in abundance in Georgian cooking. This was mostly due to the British expansionist policy and their increased colonisation through the world. Spices became more readily available, and the most popular were nutmeg, cardamon, cloves, and peppers. These were often combined and used on meats and poultry to conceal the unusual flavours that was a result of the absence of a refrigerator. The grater that accompanies the spice box was a popular utensil in colonial kitchens and was used for nutmeg as it was recommended to be freshly grated. This spice box is a part of the Churchill Island Heritage collection because it was an important element in a typical Georgian kitchen (1714 - 1830) and later. It represents the type of item that was used within Amess House.Georgian-era spice tin. Black, hinged domed lid, with six compartments and a separate nutmeg grater. churchill island, kitchen, utensils, spice box