The fishing boat 'Bluenose' a well boat was built in 1923 by Ned Jack at Launceston; owned c 1927 by Johnstone and Main when it first visited Port Fairy - bought by Syd Patterson and N.A.McDonald at Portland 1927. Sold to George Williams at Port Fairy 1928. From c 1930 to June 1937 it was owned by Williams and Ralph Davis in partnership - then owned by Ralph Davis alone. Port Fairy 1928- c1955 Wrecked at Port Albert RFB 989 45 foot x 13foot 6inches x 5footImage of the fishing boat “Bluenose” owned by George Williams in 1928. Then in partnership with Ralph Davis between 1930 and 1937 and then Ralph alone.Black and white photograph of ‘Bluenose’ fishing boat at the wharf in Port Fairy with her sails furledfish, fishing, boat, industry, couta, moyne river, bluenose, well boat, ralph davis, george williams, syd patterson, n.a.mcdonald, portland

Used by a member of the Port Fairy Life Saving Club during competitionsBlue wool, with blue and white logo attached with shoulder straps and a half zipper to attach to a swimming costume. Shoulder straps cross at back joined with the band.PORT FAIRY (Inside lifebouy LSC)recreations, sports, swimming, port fairy life saving club, competition

Colour photograph of the Fairies Tree in Fitzroy Gardens, carved by Ola Cohn.fitzroy gardens, ola cohn, fairy tree, heritage

Sackville Street Port Fairy Black and white photograph of Sackville Street in Port Fairy maybe late 1800’s -early 1900’ssackville street, port fairy, town, hosking, carter, shops, earle, printer, bootmaker

Barque built in Launceston by Jonathon Griffiths Bet.1827-1850Sepia photographThe Barque Sydney Griffiths leaving Port Fairy for London 8th February 1851 Captain J Cowton barque, passenger ship

Colour photographs of details of Ola Cohn's Fairy Tree in the Fitzroy Gardens, Melbourne.fitzroy gardens, ola cohn, fairy tree, heritage

Prior to 1901, sailing pilot cruising cutters were "Boomerang", "Corsair", "Anonyma", "Proserpine", "Rip", "Mavis" and "Hawk". In 1901 the pilots took delivery of their first steam powered pilot cutter, "Victoria", 46 metres in length, built at Williamstown. "Victoria" was followed by "Alvina", "Akuna", "Akuna II" and in 1953, "Wyuna", a twin-screw diesel electric pilot cutter 63 metres long. "Wyuna" served until November 1979 and was then sold to the new Nautical College at Launceston for use as a training ship. The system for getting pilots on and off ships at sea was for the ship to stop dead in the water with the wind and sea broad on the beam. The pilot cutter would round the ship's stern, manoeuvre into the lee and lower the 18ft. workboat which, with a crew of two, transferred the pilots to and from their ships.Chief Officer's Log Bok from SS Victoria from June 1930 to June 1931log book, port phillip sea pilots, ss victoria

This ship model is of a Colonial Port Jackson schooner, originally designed by the British Admiralty in 1803 as a response to the request of New South Wales' Governor Arthur Phillip. The drafts for the original plans are in Greenwich, UK, in the National Maritime Museum. The model is a Ledition edition, number 2 of 5, modelled by Bill Leonard. The model is rigged and decked in the manner of David McGregor. The flag on model of Port Jackson schooner is that of the British White Ensign which was used as the flag design of the Royal Australian Navy from 1911 - 1967. In 1785 the First Fleet arrived in the new British colony of Port Jackson (now Sydney Harbour) in New South Wales and Arthur Phillip was appointed as the first Governor. The following year Governor Phillip asked the English Royal Navy to provide drafts and materials for two ships for use in the Port Jackson colony for exploring and surveying rivers. The vessels needed a shallow draught and to be made from local cedar timber. He asked for the frames of the schooners to be provided along with shipwrights to assemble them. Many years later, in 1803, Governor Phillip’s request was fulfilled but he had already resigned from his post. The drafts titled ‘Schooner for Port Jackson’ were despatched by the Royal Navy from England to Australia. The original draft is still in the National Maritime Museum in Greenwich, UK. Meanwhile, the NSW Government had already built various other ships before 1803. In 1797 His Majesty’s Dockyard was opened at Port Jackson for building larger vessels. The Royal Navy’s 1803 design of a ‘Schooner for Port Jackson’ has been recognised on the obverse of Australia’s twenty dollar banknote since 1994. A sketch of the schooner is beside the portrait of Mrs Mary Reibey, who arrived as a convict and rose to become a respected and successful owner of a cargo shipping business. Her fleet included the Mercury, a schooner similar to the 1803 design for the Port Jackson schooner. Although the 1803 plans for a ‘Schooner for Port Jackson’ are commonly believed to be used for the first ship built in Australia, no records have been found of any ships being built according to these plans. However, it can be claimed that the plans were the ‘first Royal Navy plans made for a ship for use at Port Jackson, and to be built at Port Jackson, in Australia’. William (Bill) Leonard passed away on March 1st 1995.This ship model is significant for its representation of an early Australian colonial schooner. The 1803 Royal Navy’s plans for the colonial ‘Schooner for Port Jackson, were for the first ship specifically designed by the Royal Navy to be built and used in Port Jackson, for use in exploration and surveying of Australian ports and rivers. The plans are associated with Australia’s colonial settlement in the late 1700s. This ship model is significant for its association with the emblems of Australia’s history on the twenty dollar banknote. The colonial Port Jackson schooner is considered significant to Australian history, and represented on the 1994 twenty dollar banknote and its new version being rolled out in October 2019.Ship model of a colonial Port Jackson Schooner. Two-masted sailing ship displaying the flag named The British White Ensign. Mode of light coloured stained timberl is mounted on brass legs inside a glass case with timber frame and base. Metal engraved plaque states that the model is as designed by The Admiralty in 1803. Model is a number 2 of 5 in a limited edition, made by Bill Leonard.Engraved on metal plaque "PORT JACKSON SCHOONER / As Designed By The Admiralty. 1803"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model port jackson schooner, sailing ship, limited edition model, model maker bill leonard, david mcgregor design, maritime trade, maritime vessel, colonial port jackson schooner, pacific island trade in early 1800s, sydney cove, governor arthur phillip, governor philip gidley king, a schooner for port jackson, national maritime museum greenwich, australian $20 banknote

Black and white image of Port Arthur Penitentiary, Commandants Quarters and Powder Magazineport arthur, convicts, port arthur town hall, port arthur asylum

750ml ceramic flagon of port dedicated to those who served in the defence of freedom. Sth Vietnam 1962-73. Issued by Vietnam Veterans Association of VictoriaVVA Port 750mlport flagon

Part of 11 pieces modeled on the 1893 almanac published by the Port Fairy Gazette. Used as display in the first Port Fairy Historical Society building on an extended mantel piece, 20 Bank Street Port Fairy.Small handmade model of a Robert Ireland's timber yard and shop front from the 1892 almanac. R .Ireland, Timber Yards,model, building, mewkill, ireland

9 coloured photographs (a-i) of the Fairy Day held during the Wisteria Garden Party of 1994wisteria garden party 1994 whitehorse historical society