These five photographs were most likely taken in the 1970s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. Photos .1P to .3P are annotated with the name of the technicians written on the back. Although Photo .4P is not annotated the technician is positively identified. In these five photos the technician is applying a UV-sensitive pigmented dye emulating one of the print colours to a white opaque polyester sheet mounted on a rotating table in a whirler. The coated sheet was dried before placement in a vacuum light frame beneath a stud registered map negative. They were then exposed to a carbon arc lamp. If there was more than one negative – typical for a type impression or 1st proof, the process was repeated for the other negatives of that print colour. There was a single exposure for composite negatives which was typical for the 2nd and final proof - the pre-press proof. The sheet was removed and washed with water and dried leaving the exposed colour impression. The technician repeated this process using process or spot dyes for remaining publication colours. Type impressions were a combination of the map grid and the topographic features in their correct print colours, forming a base for the cartographer to accurately position map names and symbols on a clear film overlay. The pre-press proof was a cost-effective way of producing a one-off visual copy of the map or chart product. It enabled cartographers to perform a quality inspection and correct any faults before publication. The pre-press proof was deemed authoritative before its release to Print Troop for bulk printing and distribution.This is a set of photographs of lithographic technicians preparing map proofs at the Army Survey Regiment, Bendigo c1960s c1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1970s, SGT Graham Jeffers, Lithographic Squadron .2) - Photo, black & white, c1970s, SGT Ken Slater Lithographic Squadron .3) - Photo, black & white, c1970s, Ian ‘Loft’ Turner, Lithographic Squadron .4) - Photo, black & white, c1970s, Gary Kerr, Lithographic Squadron .5) - Photo, black & white, c1960s, unidentified, Lithographic Squadron.1 to .3 – personnel names (less rank) annotated on back. .4 to .5P – no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

These six photographs were most likely taken in the 1990s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. There is no annotation describing the date or personnel in the photographs. Cromalin proofing was a laminate and dry powder proofing system introduced in 1978. The system allowed the production of true to colour proofs, mainly for the proofing of orthophoto maps and process printed 1:250,000 JOG that used positive printing plates. It was upgraded in 1986. The pre-press proof was a cost-effective way of producing a one-off visual copy of the map or chart product. It enabled cartographers to perform a quality inspection and correct any faults before publication. The pre-press proof was deemed authoritative before its release to Print Troop for bulk printing and distribution.This is a set of six photographs of lithographic technicians preparing Cromalin map proofs at the Army Survey Regiment, Bendigo c1990s. The photographs were on 35mm negative film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) to .6) - Photo, colour, c1990s, printer technician SPR Shona Hastie, Lithographic Squadron. .1P to .6P – no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Unprinted, forme-cut black folder, triangular window, sealed with triangular sticker containing a suite of A5 (148 x 210mm) cards promoting works of University of Ballarat, Advanced Diploma of Graphic Design (2 years) students. Contains 15, two-sided A5 cards, most featuring student work. Reverse of first card lists 12 graduates for 2010. Introduction by Paul Mah (co-ordinator / teacher). Teaching staff listed as Sam Harmer, Jill Hyatt, Slena Shillito, Travis Price, Ben Sanders, Anthony Woodward, Paul Mah, Alister Heighway, Peter Lambert, James Baker. Printed by Sovereign Press. Pack by Bennet-Meyer Packaging. One card features supporting sponsors Unprinted, forme-cut black folder, triangular window, sealed with triangular sticker containing a 15 A5 cards promoting student work.Promotional catalogue (pack of A5 cards) for graduating students of the University of Ballarat (TAFE), Advanced Diploma of Graphic Design. Unprinted, forme-cut black folder, triangular window, sealed with triangular sticker containing a 15 A5 cards promoting student work.university of ballarat, federation university, graphic design, tafe, advanced diploma, arts academy, camp street campus

Announcement by Premier Daniel Andrews, Minister for Public Transport, Jacinta Allan and Member for Eltham, Vicki Ward mad alongside the Eltham Railway Trestle Bridge. MEDIA RELEASE "More Trains And Fewer Delays On The Hurstbridge Line" https://www.premier.vic.gov.au/wp-content/uploads/2018/08/180801-More-Trains-And-Fewer-Delays-On-The-Hurstbridge-Line-1.pdf Commuters on the Hurstbridge line will have more trains, more seats and fewer delays with a re-elected Andrews Labor Government to continue its massive upgrade of the Hurstbridge line. The Andrews Labor Government said it would deliver locals in Melbourne’s north-east more peak hour train services and less time stuck at boom gates, and we have. The first stage of the Hurstbridge Line Upgrade has been delivered – six months early and on budget. This includes the new Rosanna Station, duplicated track between Heidelberg and Rosanna and the removal of the dangerous level crossings at Alphington and Rosanna. There’s more to do and only Labor will deliver the next stage of the Hurstbridge Line Upgrade to give local commuters more train services and a more comfortable commute. The $530 million project will include a brand new train station at Greensborough and the duplication of three kilometres of track between Greensborough and Montmorency, and 1.5 kilometres of track between Diamond Creek and Wattle Glen to allow more train services during the morning peak. This will allow trains to run every six and a half minutes at Greensborough, every 10 minutes at Eltham and Montmorency, and every 20 minutes at Hurstbridge, Diamond Creek and Wattle Glen – as well as two extra Hurstbridge express services. Locals on the Labor Government’s new Mernda line will also get five extra train services during the morning peak, with a major upgrade of the Clifton Hill junction where the Mernda and Hurstbridge lines connect. Labor will also protect the Eltham Trestle Bridge – the last remaining timber bridge on Melbourne’s electric train network – which has local heritage protection and is an important part of the area’s character. The Liberals will leave this bridge to rot and demolish the nearby childcare centre and football club with their under-cooked and under-costed promise to upgrade the Hurstbridge line. Only Labor will protect this important piece of Melbourne’s history with planning work to be carried out for a long-term solution as part of the project. Stage two of the Hurstbridge Line Upgrade will create more than 950 jobs, with construction to start in 2020 and finish by 2022. Quotes attributable to Premier Daniel Andrews “We said we’d upgrade the Hurstbridge line and remove dangerous and congested level crossings at Rosanna and Alphington and we did – but there’s more to do.” “Only Labor will deliver the next stage of the Hurstbridge Line Upgrade with a new Greensborough Station and more trains, more often.” Quote attributable to Minister for Public Transport Jacinta Allan “The former Liberal Government promised new train lines but didn’t deliver a single kilometre of track – now they’re promising a half-baked upgrade of the Hurstbridge line with rubbery figures that don’t add up.” Quote attributable to Member for Eltham Vicki Ward “As a fifteen year old hopping on Red Rattlers at Eltham I wanted to do something to make the Hurstbridge line better. It’s taken me a few decades but finally our line will offer the frequency of services that are expected and needed in a 21st century city.”Born digital image (qty 27)jacinta allan, minister for public transport, panther place, premier daniel andrews, press announcement, railway line construction, trestle bridge, vicki ward mp for eltham, victorian parliament

One booklet with yellow cover and a picture of a man holding a woman in his arms. On the cover are the words, ' Capitol - The Theatre Magnificent. Cecil. B de Mille's mighty production, The Volga Boatman. Released in Australia by First National.' Printed by Farrow Falcon Press, 226-30 Little LonsdaleStreet, Melbourne.c. 1928. 34 pgs. Includes advertisements, illustrations, photos, plan of exits and the programme itself.program, theatre, the volga boatman, lydia chancellor, collection, theatre, entertainment, music, event, programme, program, programme

A steam boiler like this late 18th century boiler, is often called a colonial boiler. Steam boilers were used in factories throughout Australia, mounted over similar designs of brick furnaces. This heat from the fire travels through the tubes in this fire tube boiler and the water heats as it circulates around them. Another kind of boiler is a water tube boiler, in which the water is inside the tubes and the heat of the combustion surrounds the tubes. The boiler in our collection burned wood as fuel but others of this design could also burn coal, coke, gas and liquid fuels. The boiler was made by T & F Johnson, boilermakers. In 1922 their factory was located at Coventry Street, South Melbourne. They were still advertising their 'Colonial, multi, vertical boilers, all sizes' at the same address in 1934. The connected pressure gauge, made in London by Dewrance, measures 0 to 400 pounds per square inch. John Dewrance is renowned as a pioneer of the steam locomotive in the early 19th century. He founded John Dewrance & Co. in South London in 1844. His son Sir John Dewrance took over in 1879. In 1939 the company became a subsidiary of Babcock & Wilcox, and was eventually owned by Emerson. How the boiler works: - A boiler is about two-thirds filled with water and heat is applied, in this case in the form of burning wood. The heat is transferred through the metal of the boiler to the water. When the water boils the steam rises to the top, and as it escapes from the boiler the steam pressure builds up in the steam space to later be released to do work; drive machinery such as ship and train engines, turbines, presses, wheels, and driving belts to operate looms and saws. The heat associated with the boiler can be used for preserving food, sterilising, factory manufacturing processes, and steaming wood for shipbuilding. Every boiler has several components fitted for safe operation: - - Safety valves - Gauge glass - Pressure gauge - Main steam stop valve - Water check valve - Blowdown valve - Manhole doorThe boiler is a significant item that gives us a snapshot of early Melbourne's industrial history. It is an example of the technological advancement during the Industrial Revolution where steam-driven machinery and motors could perform tasks more efficiently than manual labour. The makers were one of many boilermaker businesses in Melbourne during the early late-19th andearly 20th centuries. The maritime trade and skills of boilermaking are still learned and applied today. The Dewrance steam pressure gauge connected to the boiler was made by the London firms foundered by John Dewrance. He was renowned for developing the steam locomotive in the early 19th century.Boiler; a horizontal cylindrical underfired steam boiler. It is a multi-tubular design and is timber plank-clad, with brass fittings and pressure gauges. The boiler has an iron door at one end with a metal chimney above it. It is installed over a brick-enclosed solid fuel furnace. Two large, wood-mounted pressure gauges are connected to the boiler and have inscriptions. An inscription is on a red, cast iron plaque above the boiler door. The boiler's maker is T & F Johnson, South Melbourne. One of the pressure gauges was made by Dewrance, London..Maker's plate: "T & F JOHNSON / BOILERMAKERS / SOUTH MELBOURNE" Pressure gauge: "POUNDS PRESSURE / PER [square] INCH / DEWRANCE LONDON"flagstaff hill, warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, boiler, multi tube boiler, steam boiler, steam technology, underfired boiler, horizontal boiler, timber clad boiler, steam power, industrialisation, boilermakers, south melbourne, dewrance, john dewrance, pressure gauge, dewrance pressure gauge, t & f johnson, london, steam engine, steam locomotive, pounds per square inch, 19th century, steam machine, johnson tyne foundry, colonial boiler, fire tube boiler

Ron Bridger was an avid collector of items related to transport, predominately Trams. These items include newspaper cuttings, pamphlets, reports, timetables, fares prices plus special items relating to events. Items from Melbourne and regional Victoria, interstate - Adelaide and Sydney, plus overseas, make up this collection. Item is a white paper bag specifically for the Centenary of the Box Hill - Doncaster Electric Tramway. Dates and times for this celebration are printed on the bag. Inside are numerous items related to this occasion. .a) Information sheets No 1: Public Street Transport in Melbourne. by N.W. Maddocks No.2: The role of the Melbourne and Metropolitan Tramways Board in the history of street transport. by N.W. Maddocks No.3: Why have tickets? (The Tramway Museum Society of Victoria Inc) No.4: The historic trams of Victoria. (The Tramway Museum Society of Victoria Inc.) No.5: Driver's cab - Melbourne W3 Tramcar. (The Tramway Museum Society of Victoria Inc.) No.6: Henry James Hilton - Member Institute of Engineers 1891. From notes by Merrick Hilton (grandson) 1987. No.7: Where is this tram going?. (The Tramway Museum Society of Victoria Inc.) .b) Small yellow booklet - "Australia's First Electric Tram: The story of the Doncaster and Box Hill Electric Road" by J.K.Moir. Printed Melbourne 1940. .c) Postcard - black and white; Shows the Opening of the Box Hill-Doncaster Electric Tramway - 14 October 1889. The reverse side gives a brief history. It operated from October 1889 until January 1898. .d) Small white paper bag with title stamped on it. Inside two small yellow tickets for Centenary Tramway Exhibition. A sticker for the Centenary also included. .e) Pamphlet giving a brief outline of the Box Hill-Doncaster Electric Tramway. Contains an article that appeared in "The Reporter" dated 17 October 1989 stating the importance of this enterprise - "Footprints in the sands of time......." .f) Yellow flyer advertising a book "The First Electric Road" by Melbourne architect and historian, Robert Green. This will be a limited edition and due for release in late November 1989. Order form on reverse of the flyer to be sent to John Mason Press. White bag labelled - Box Hill - Doncaster Electric Tramway - Centenary. Numerous items relating to exhibition collected and placed in paper bag. Date: 19th - 28th October, 1989. Daily, 10am - 4pmbox hill-doncaster electric tramway, memorabilia, centenary exhibition, 1889-1989, public street transport, why have tickets?, tramway museum society of victoria, melbourne w3 tramcar, henry james hilton, n m maddocks, merrick hilton, australia's first electric road, j k moir, the first electric road, robert green, historian, postcard-black and white, opening of tramway, 14 october 1898, centenary sticker, ron bridger collection, as box 48a

A4 sheet of paper, printed giving details of the commencement of regular Wednesday operations of the Ballarat Tramway Museum. Prepared by Len Millar on 18/11/97 for services commencing on 19/11/97. Copy in collection printed 1/1/98 from document held on computer. Images added 24-12-2016trams, tramways, btm, tramcar operations

A4 size sheet of preprinted paper for News Release from Vic Minister for Transport - preprinted in blue ink with "Victoria on the Move" wording and state coat of arms. Printed (Laser) with text for 26/11/96 ceremony of hand over of 2km of trolley wire to the BTM. Image added 27-11-2016trams, tramways, btm, trolley wire

286 p. : red cover, decoration of leaves embossed on front cover and spine.fictionhenry de vere stacpoole, fiction

Prepared by the Metroplitan Transit Authority for the celebration of 100 years of trams in Melbourne - 1985 1 - "Melbourne celebrates 100 years of trams" - 2 sheets - introduction to the event celebrations. 2 - "Tramway Centenary Celebrations" - 3 sheets - schedule of events 3 - "The cable tram" - 9 sheets - including many copies of old press clippings. 4 - "Cavalcade on Sunday 10 November" - 3 sheets - provides a list of trams to be used. 5 - "One Hundred years of Melbourne's trams: A short History" - 4 sheets 6 - "The Opening of the first tramway" - 3 sheets - Spencer St to Richmond The folder also contains the book "100 years of Melbourne Trams" - item 97. Provides infomation about the event to celebrate 100 yeas of trams in Melbourne in 1985Light card folded folders containing 6 press Media Information A4 sets of sheets stapled in top left hand corner, printed with the "100 years of trams" logo.melbourne, tramways, trams, 100 years of trams, the met, cable trams, mta, horse trams, events

Gwyneth "Gwen" Goedecke collectionHiroshima|Historical articles, Hiroshima Day Speech (Rally 2007) Melbourne|Campaign for International Co-operation & Disarmament (CICD) - 40 years on - Commemoration (1985) |Nuclear Disarmament - People for Nuclear Disarmament (PND) including the Footscray Sunshine PND group|signed petition World Disarmament Campaign (1982) sponsored by the UN Association of Australia|Scottish Campaign for Nuclear Disarmament (post 2007) - Why the US is targeting Russia and Iran ...... Nuclear Primacy|publication of the Medical Association for Prevention of War (Australia) 2007 titled ' Understanding the Nuclear Non-Proliferation Treaty'|Australian Nuclear Free Zones Secretariat including minutes and correspondence - Sunshine Council|Non- Proliferation Legislation Amendment Bill 2003 (Australia) Uranium Mining - protest groups meetings, rally notices, newspaper articles, Atomic Energy in Australia magazines Volume 18, number 4 |Campaign for International Co-Operation and Disarmament (CICD) - Australia's longest runing peace movement, founded in 1959 by unionists, church leaders and peace activists (originally called World Congress for Disarmament and International Co-Operation) |United Nations - Australia and the United Nations Annual Report Card (2007) - report by Gwen Goedecke (1995) - 50th Anniversary Conference : The United Nations - Between Sovereignty and Global Governance - (La Trobe University)|UNITY - newsletters, publications of the UN Association of Australia -#274 (September 2001) AND #331 (March 2003) -compiled from Federal Parliamentary and other sources relevant to Australia's obligations to the UN | Arms Race/Spending: Newspaper clippings '70s to 2008 Senate Motion on National Missile Defence (200?) Submission re Australian involvement in Missile Defence dated? Defence White Paper Community Consultation Process and correspondence (July to September 2008) Exposing the Bare Essentials Behind the Arms Trade: Connecting Women's Rights & The Peace Process - by Yum Lee, Women's International League for Peace and Freedom (1995) Various articles on arms/disarmaments/national security/defence spending including Senate Questions (1994 &1995) Australian Controls on the Export of Defence & Related Goods - Guidelines for Exporters - Department of Defence (1992) World Action to Stop the Deadly Arms Race - report isssued by Alf Watt for the Australian Socialist Group NSW (post 1975) Anti US/Foreign bases in Australia - '80s to 2000 Anti US bases in Australia and the Paciic including PINE GAP newspaper - Oceania (1986) |East Timor Article by Vera Butler (PHD, Political Science, Uni of Melbourne) on Australia, East Timor and The Clinton Doctrine - September 1999 |Middle East List of UN Resolutions against Israel (1955-1992) Map of Middle East Theatre of War, from the Centre for Research on Globilisation, Canada (2003) Brief - Middle East highlights (1973) by Israel Press Ltd., Tel Aviv |Iraq War (1998-2004 Newspaper arlticles Flyers protesting the war, rally notices Reports, emails, correspondence, media releases, petitions, newsletters Socialist Worker pamphlet - 'Is the UN an alternative to the US Empire?' Report by Dr Carmen Laswrence MP - 'What War?' (April 2003) A.N.S.W.E.R Coalition response to President Bush's National TV address of September 7, 2003 |Peace andTerror World Peace Council Presidential Committee meeting, Stockholm (1975) (2 reports) 'Challenging the Cold War' - an analysis of the motivation and strategies of the Victorian Peace Council in the 1950's, by Nancy Florence Phillips B.A. (Oct 1986) Palm Sunday Peace Rally & Festival poster (1988) Media Report (2003 'Managing Terror in the Media', together with Gwen's notespeace

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

John Shirlow (1869-1936) John Shirlow was the first Australian to make etching the basis of his career. Schooled in Melbourne, he studied for a time with Artur Loureiro and attended design classes at the National Gallery School from 1890 to 1895. Specialising in renderings of old Melbourne buildings, which are now of great historical interest, he drew directly onto the plate in reverse. In 1929 he founded etching classes at the Working Men's Institute. Throughout his life a prominent figure on the Victorian art scene, he was involved in various choirs and bushwalked with R.H. Croll and C.J. Dennis. He was a Trustee of the National Gallery of Victoria from 1922 to 1936. (http://www.portrait.gov.au/people/john-shirlow-1869)Bookplate "Ex Libris R.H. Croll Solvitur Ambulando" by John Shirlow This Ex Libris Etching was released as Part of P. Neville Barnett`s ``Pictorial Book Plates`` Privately Published and Released as a Limited Edition ``de luxe`` Version, The Publication was Edition Number 95 of 100, Year of Publication: 1931Etched bookplate "Ex Libris R.H. Croll Solvitur Ambulando" showing a boy with swag and billy reading a book as he walks towards the rising sun. Shirlow with 1923 printed lower left beneath the image. r.h. croll, john shirlow

Wanting to improve upon the limitations of existing Braillers, the Perkins School for the Blind resolved to develop a new machine that would produce uniformity in embossing, was lightweight and was easy to use. By the 1940's, David Abrahams (a teacher at the school) had developed his prototype, but manufacturing restrictions created by World War 2 halted proceedings. In the waiting period, students at the school used the prototype and Abrahams perfected his device. During the post-war era, Howe Press agreed to take on production of the Perkins Brailler and it became of the most popular and commonly used Braillers around the world since it's commercial release in 1951. Also included is a booklet of photocopied instructions with honeycomb binding.Metal Braille writer with nine grey keys, carriage return key and paper rollers on either side, with grey vinyl cover, and photocopied instruction booklet.'Perkins Brailler' embossed on front of machine and in silver on cover. Sticker on top of machine reads "This equipment remains the property of Braille and Talking Book Library 31-51 Commercial Road, South Yarra 3141 Phone: (03) 267 6022." Metal plate attached to front below keys "Designed by David Abraham, Manufactured and Distributed by Howe Memorial Press, Perkins School for the Blind, Watertown, Mass. U.S.A." Stamped on base of front: G0345braille equipment, perkins school for the blind

Postmaster-General's Department telegraph linesman, Chris Byrnes, received a British Empire Medal for bravery and devotion to duty for his response to the flooding at Darlington Point, New South Wales, in June 1952. As E Henderson, then Acting Director of Posts and Telegraphs recalled, the town's "communication lines were menaced by floodwaters" when the nearby Murrumbidgee River flooded. In order to retain communication to the town, Chris Byrnes, a Postmaster-General's Department employee of over 13 years, acted in the "best traditions of the service" (E Henderson). An eye witness, recorded in the Murrumbidgee Irrigator newspaper on June 27 1952, described Byrne’s efforts: "An interesting incident was witnessed when a Leeton post office linesman swam through flood waters to reach a telegraph post which had been washed out by the flood…With a rope tied around his waist, one end of which was held by other members of the linesmen's gang, Chris Byrne swam through the flood water…to release the trunk lines from the post." An eye witness, recorded in the Murrumbidgee Irrigator newspaper on June 27 1952, described Byrne’s efforts: "An interesting incident was witnessed when a Leeton post office linesman swam through flood waters to reach a telegraph post which had been washed out by the flood…With a rope tied around his waist, one end of which was held by other members of the linesmen's gang, Chris Byrne swam through the flood water…to release the trunk lines from the post."darlington point, murrumbidgee river, pmg, postmaster-general, linesman, flooding, natural disaster, emergency

This camera went ashore at Gallipoli on the first day of the invasion 25/04/1915.Metal silver Vest Pocket Kodak Camera. Rectangular box type with scissor pop out lens. Bellows made of leather During WW1 it was marketed as a camera suitable for soldiers due to size and portability, often referred to as "The soldiers camera". It has small shutter release button mounted above the lens plate and below the lens there is a slider for choice of apertures, It originally used A127 autographic roll film. The case is small leather black rectangular shaped with flap and press stud to keep shut.On plate holding the lens-:VEST POCKET KODAK Patented Mar 4,1902,May 6,1913 On bronze piece surrounding the lens -: 25BT50 clear ...brilliant tripod gray 1/2 sec ...dull 3/4 sec...very 01 sec Made by Eastman Kodak Co Rochester USA Autotime patent 1908 cloud marine distant view ave rge view nearview portrait No markings on leather case.

A copy of the Act of the Victorian Parliament relating to the property held in trust for Junior Legacy, Melbourne. It mentions that Richard Goldsmith of the United States wanted to mark his appreciation of services rendered in Australia to the armed forces of USA during World War 2 and in memory of the late David H Dureau. The company BG Corporation (of the USA), of which he was president, gave a gift of £27,059 to Junior Legacy Club of Melbourne for the purchase and fitting out of premises for the use of the club in its principal object of the care and welfare of children of deceased servicemen. Also that the building be perpetually known as the "D H Dureau Memorial Building". The first building that was purchased with the donation was 342 Swanston St, however it was found unsuitable and this Act allowed it be sold and a new building be found (293 Swanston St). The Act was cited as "Junior Legacy Melbourne (Dureau Memorial) Act 1953". The hand written note says that the Act "tells a story", is possibly part of the notes made when compiling the history of Legacy. They were in a folder of documents about the history of Legacy. Appears to have been mostly compiled by Legatee Cyril Smith as he has many hand written notes on miscellaneous pieces of paper (some are envelopes addressed to him). The notes were typed up into a summary of the History of Legacy. Also documents relating to the first time Legacy approached the public for donations in September 1956, including newspaper articles that were reprinted, a schedule of information that was approved to be released to the press, and a list of potential donors that was circulated to Legatees in the hope they could contact the ones they knew personally or professionally. The call for public donations was partially due to the purchase of the Dureau building and the need to modify the building for Legacy's needs. The documents from this folder have been added in separate records (see 01262 to 01281). The folder was part of an attempt to capture history of Legacy, generally from the 1950s. See also 01284 - Title deed of Legacy HouseThe documents provide an insight into the working of Legacy, especially in the 1950s. Legatee Cyril Smith and others were detailing their experiences and knowledge for the future.Four page copy of an Act of the Victorian parliament relating to the property held in Trust for Legacy and a hand written note.Hand written on the note: "This Victorian Act (No 5717, 1953) tells a story:"properties, dureau house