This is a book made by Army School of Transport. The cover is a thin cardboard, coloured brown. Printing is in black ink. In the centre is a form of shield. On top is a banner with words "Army School of. At the bottom is the word "Transport". It has approx 44 pages of black and white photos and specifications of equipment. i.e. Aircraft, Trucks, APC road rovers, Trailers, Tractors, Graders, Water Craft etc.passchendaele barracks trust, transport, planning, equipment specs

Henry Sutton is a talented world-wide accepted inventor with inventions relating to the telephone, photography, wireless, cars, motorcycles, and bicycles as well as many more inventions. Henry was also one of four brothers that ran the Sutton's Music Store after the death of their Father Richard Sutton. Henry Sutton taught Applied Electricity at the Ballarat School of Mines in 1883 to 1886.Copy of plan used in the French patent of Henry Sutton french patent, henry sutton, plan, 1899

Correspondence relating to the Ballarat School of Mines. ballarat school of mines, e.j. barker, jack barker, harold trudinger, prize night, fees, t.g. seymour, correspondence, graduation, ballarat civic hall, floor plan, e.a. bald, royal australian chemical institute, open night

In 1900 this building was described as 'handsome in design, well lit, well ventilated, commodious - containing Council room, office, chemical laboratory, mineralogical laboratory, students room and six lecture rooms. Postcard of the original hand coloured plan on linen of the Ballarat School of Mines New Classrooms (from 2014 known as the Federation University Australia SMB campus Administration Building). The plan shows the front elevation, section on line, ground and 1st floor plan. ballarat school of mines, new classrooms, administration building, architectural plans

This plan was printed in the Ballarat School of Mines Annual Report were Ferdinand Krause was a professor.Printed plan showing iron ore deposits at Lal Lal.lal lal ore, moorabool river, ferdinand krause

Plans that were on display for opening of the refurnbished Flecknoe BuildingThree images of plans for the refurbishment of the Flecknoe Building at the Federation University SMB Building.ballarat school of mines, flecknoe builiding, refurbishment, buildings

The E.J. Tippett Librocate.ary is named after the late E.J. Tippett who was a long time President of the Ballarat School of Mines Council, and library advocate. In February 1985, the first sod for the new SMB Campus building was turned by the Minister for Planning and the Environment, the Hon. Evan Walker, M.P. The overall responsibility for the building rested with the Public Works Department in association with the SMB Campus architect, Ewan Jones & Associates and the builder, S. J. Weir Pty. Ltd. They put together the facility that is both functional and of a style that merges with the surrounding architecture. The new building opened in 1986.Colour photographs showing the exterior of the E.J. Tippett Library at Federation University Australia SMB Campus. e.j. tippett library, tippett library, smb library, tippett, e.j. tippett, ewan jones and associates

The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.Black and white photograph of the Davey Paxman Experimental Steam Engine. On the brake is returned serviceman Norman WIlliam Ludbrook (Diploma Electrical Engineering, 1952). Far right is Roy E. Mawby (Diploma Electrical Engineering, 1950)steam engine, model steam engine, davey paxman, electrical engineering, laboratory, scientific instrument, norman ludbrook, norman william ludbrook, roay mawby, roy e. mawby

This building was erected c1856 as the Wesley Church. Negotiations for its sale to the Ballarat School of Mines started in 1883, and the sale was completed for 2000 pounds. The Ballarat School of Mines Musuem was transferred to this building in 1885 giving the collection a more permanent and suitable location. The front was remodelled in 1920. The building was converted from the museum to the E.J. Tippett recreation Hall in 1959, after plans to demolish it were abandoned due to lack of funds.Colour photograph of the former Ballarat School of Mines Museum during a fall of snow. ballarat school of mines, e.j. recreation hall, ballarat school of mines museum', former wesleyan church, snow

The former Ballarat Circuit Court Building, later the first building of the Ballarat School of Mines, was demolished to make way for a new custom built Art School building. Sir Alexander Peacock opened the Ballarat Technical Art School in July 1915. It cost 10,000 pounds and was constructed by the Public Works Department from plans drawn by the then Art School Principal, Herbert H. Smith. The building contractors were Messrs Gower and Eddards. According to the SMB Annual Report of 1914 'the internal upholstering and fittings have all been carried out in Australian timbers, with Queensland maple largely used throughout.' Before this building was constructed art and craft classes were held in various buildings around Ballarat. The building could be described as federation-art deco in style. It features sandstone insertion with sandstone string coursing. The base of the building is rusticated sandstone. The relief stone panel on the front with the words "Technical Art School" features stone pilaster brackets and corbels. In the centre front can be seen rectangular sandstone pediment with decorative stonework incorporating the date of construction. The windows in the lower floor feature five supporting keystones whereas the upper windows have sandstone lintels. The building also features decorative cast iron downpipes. The entrance on the northern side has attractive leadlight glazing in an art deco style. Above the door a miner's lamp and pick are featured in the design. The building is functional in design with large metal windows in the south wall to ensure good light into the studios. The northern wall has standard double hung windows. The interior of the building features a carved wooden staircase and cast iron ceiling vents. The rear drawing studios can be made into one large studio by opening panelled timber doors. This opening features classical plaster pilasters with a pediment above.Colour photograph of a sandstone detail on a double storey, red brick building - the Ballarat Technical Art School, a division of the Ballarat School of Minesballarat school of mines, ballarat technical art school, architecture, art, gribble building

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. In 1964 the Victorian Government announced that a committee be established to plan for the establishment of a Victorian Institute of Colleges. Eight Technical colleges would be raised to the level of university colleges. Ballarat School of Mines was on the list. Plans were also underway for the development of a new campus at Mount Helen. The Mount Helen Campus was officially opened on 30 October 1970 by the Hon Sir Nigel Bowen, Minister for Education and Science. It was at this Campus, in 1977, that VIOSH was conceived and from 1979, when the first intake of VIOSH students started, it became a significant course at Ballarat College of Advanced Education and continued to recent times.Colour photograph showing the Mount Helen Campus buildings.viosh, victorian institute of occupational safety and health, victorian institute of colleges, ballarat school of mines, university colleges, hon sir nigel bowen, minister for education and science, mount helen campus, ballarat college of advanced education

Ian Gordon played a prominent part in both the development of the Mt Helen Campus and in the progress the Institution made prior to becoming a University on 01 January 1994; In 1973 he was appointed President of the Council of hte newly created State College of Victorian at Ballarat (SCVB) which absorbed the former Ballarat Teachers' College. As President, he led the merger of the SCVB with Ballarat Institute of Advanced Education (BIAE), the tertiary division of the School of Mines and Industries, Ballarat. Out of the merger the Ballarat College of Advanced Education (BCAE) was established on 01 July 1976. Ian Gordon, a partner in the Ballarat law firm Heinz and Gordon, became the first Vice-President of the new Council and was involved with the plan to transfer the former SCVB to the Mt Helen site. In June 1981, Ian Gordon became President of the Council of BCAE and held that position until June 1989. He remained a member of the Council of the BCAE (later Ballarat University College) unti l31 December 1993, the eve of the creation of the University of Ballarat. He was the only person to remain a member of the BCAE and the BUC Councils for the whole of their existence. Mt Helen T Building wzs erected to house the major part of teh State College of Victorian at Ballarat when it moved to the Mount Helen Campus.Folded programme and invitation for the Naming Ceremony of the South Wing of the Education Building T "Ian Gordon".ian gordon, ballarat college of edvanced education, state college of victoria at ballarat, t building, ballarat institute of advanced education, david james, verna barry, building name, mt helen campus

Percy Richards taught Architecture and Building Construction at The Ballarat Art School - a division of Ballarat School of Mines from 1918-1921. He was responsible for the design of a number of buildings in the district. This item is the "Specification of work required to be done and materiaals required for construction of the new A.N.A. Building at the corner of Sturt, Albert and Lewis Streets, Ballarat. Prepared by and to the satisfaction of P.S. Richards, A.R.V.I.A. Architect and subject to the General Conditions of Contract." "BALLARAT CITY A.N.A. BALLARAT, Wednesday — The Ballarat City branch, A.N.A., which was formed nearly 50 years ago, ranks fourth on the association records, but several of the members were prominent in establishing the association in Melbourne a year or two earlier. On the past half-year's operations the total funds increased by £1558/18/3 to £29.389/11/11. The membership now totals 949. The committee recommended that as the property at the corner of Sturt and Albert Streets, which had been intended as the site of a new hall, had been sold, steps should he taken to remodel the present hall, and bring It up to date. The report was adopted." (The Herald, 18 June 1924)Fourteen detailed drawings showing the specifications for each section of the new A.N.A. building for Ballarat. A 24 page document submitted to the Public Health Department, Victoria, received 15 January 1918 and a 3 page document related to Reinforced Concrete Particulars. All contained in a labelled black metal cylinder.A.N.A.4. PLANS painted on side and lid. Signature of P.S. Richards.ana, australian natives' association, architecture, percy richards, building specifications, ballarat, technical art school ballarat, materials, construction, p.s. richards, percival selwyn richards

Framed original plan of the Ballarat School of Mines New Classrooms (later called the Administration Building). The plan includes a front elevation, a gound floor plan, first floor ground plan, and a section on line. ballarat school of mines, architectural plan, administration building, new classrooms