Home-made Spirit Level approx. 30 cm long. Round piece of 2cm Dowel, flattened on one side. Contains a small glass tube with liquid and air bubble inside. The glass tube is kept in place by a metal sleeve with small window to form a spirit level.

Small white ceramic ink well for a school desk.commerce, office equipment, ink well

Set of small brass scales mounted on a square wooden base on four black bun feet, base has three circular indentations lined with black felt for housing weights.weighing, weights & measures

Scythe blade, with makers marks, 'Tyzack and Sons and Turner, Sheffield'. There is also a small elephant stamp on one end of the scythe. Approx 700mm x 80mmTyzack and Sons and Turner, Sheffield

A billhook or bill hook is a versatile cutting tool used widely in agriculture and forestry for cutting woody material such as shrubs, small trees and branches. A billhook consists of a handle and a blade with a bevelled cutting edge. The blade is curved at the top end to form a hook shape. The handle is virtually always wooden.Rough pine handle with many borer holes. Commercially made (no ID) cast in socket one end, strap iron riveted other end. Cast blade.tools, hook, bill hook, churchill island, farm, iron

Double ended (large/small) # 209 stamp. Has had welded repair on large end209 SHELDON AXLE COMPANYbox, spanner, tool, tools, double, welded, sheldon, axle, churchill island, farm

The double-ended ring spanner served as a useful, manual tool for maintaining farm machinery. The hexagonal rings would be placed over a nut to secure it, before the spanner was rotated to tighten the nut. The ring design provides greater purchase, or grip on all sides of the nut, which in turn reduces the risk of rounding the nut, or slippage. Early spanners were mostly made from iron and hand-forged using an anvil and hammer. Since the mid-19th century, gravity or powered drop forging techniques were used to compress metal for greater strength. Ring spanners produced in the 20th century are mostly made of chrome vanadium steel.stainless steel, some pitting. One end slightly smaller than the otherdouble, ended, spanner, tool, tools, churchill island, farm

This instrument is a 'McKay Massey Harris Spanner P206'. These spanners were supplied with harvesters and other implements to be used by the farmer to maintain his equipment. The agricultural spanner was often of odd shapes to allow for use in confined spaces or because the one tool could be used for more than one function. Broken one end. Small box spanner and broken open spanner one end, square box spanner with two open spanners at other end. Rusted.1_06combination, spanner, broken, tool, tools, churchill island, farm

open ended cast spanner. Heavy duty. Handle has 2 small drill holes7/8 [on jaw]cast, spanner, heavy duty, tool, tools, farm, churchill island

A Spokeshave is an ancient woodworking tool, used to shape items by gradually shaving back the wood. Originally made from stone, they evolved to have wooden handles with a steel blade, and the type varied depending on its purpose. It could be used for wheel spokes, chair legs, paddles, bows, or arrows, and was an essential tool for farming and homesteads. More modern examples are now made entirely of metal.Cylindrical length of wood, with tapered handles at each end. The centre section has a steel insert with a brass guard strip, and there is a small crack on woodwork.spoke shave, woodwork, hand tools

This mallet is handmade simply from a red gum block and dowel handle. It is complete and has been repaired with screws. Mallets were used to drive timber pieces together without damaging the work.Wooden mallet, with a long dowel length of wood for the handle, attached to a unshaped block of redgum as the head. Small paint stains, and two screws affixed in either end of the handle. mallet, hand tools, churchill island, redgum

Panel saw with tapering blade and small corrugations, wooden handle affixed with brass rivets. Borer holes in handle. Surface rust and pitting on steel.DISSTON [on brass plaque on handle]

Used for straight cutting along the grain of thick timber, rip saws were typically 24 to 28 inches long with 3 to 6 points (ripsaw teeth) per inch along the length of the steel blade. The saw’s closed timber handle is positioned above the heel of the saw and the blade tapers along its length to a narrow toe. The cut made by the saw, the ‘kerf’ is wider than the thickness of the blade as the bent teeth take out small pieces of wood, or sawdust. The kangaroo brass stamp indicates the saw originated from Robert Sorby and sons’ Kangaroo Works, in Sheffield, UK. The kangaroo brand emerged in the early 1800’s and was used extensively until the 1980’s.Tapered steel blade with corrugations and scalloping on cutting edge, affixed to a sturdy wooden handle by brass rivets. Some surface rust and borer holes.KANGAROO [on plaque on handle]rip saw, woodworkers tools, churchill island, amess barn

Bronze saw set with steel fittings and red paint on jaw. Meant for smaller sawsEclipse No 77 Made in Englandchurchill island, saw set, eclipse, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.single handed cross-cut saw. Peg grip missing?circular brass manufacturer's plate: SPEAR & JACKSON Sheffield. Crown symbol.churchill island, crosscut, saw, tool, machinery

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

Brass octagonal ring spanner with straight handle, and a small hole bored into the end. To go with the Essex car, churchill island, tool, ring spanner

Adjustable Stillson pipe wrench with a spanner and thread. Black finish with small amount of surface rust. churchill island, pipe wrench, stillson, tool

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.small wedge with substantial chip out of narrow end. Relief grooveHYTEST FORGED TOOLStimber splitting, churchill island heritage farm, olinda, shady creek, wilfred dungan collection

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe has a bored hole in the handle, probably for affixing a long wooden handle. Made by Trojans and Sons, a Melbourne based company that made a wide range of gardening and agricultural tools, this scythe formed an integral part of farming on Churchill Island. scythe with surface rust, no handle, good steel, rough welds on socket, hole for mounting handle (e.g. with screw)TROJAN/264scythe, hand tools, agriculture, churchill island heritage farm

Made and imported by Swedish company, Husqvarna, this machine was used to mince larger pieces of meat. The grinder was clamped securely to a table, and meat was then fed into the machine through the funnel at the top. The wooden crank handle was turned, moving the spiral grinding mechanism, and pushing the meat through the sieve-like fitting at the end. While hand mincers were ubiquitous in the late nineteenth and early twentieth-century kitchens, and was responsible for reducing food waste and promoting frugal ideals, the Husqvarna brand sold over 12 million worldwide.Hand operated mincing machine, larger than usual, with multi small holed attachment in place. Tin plating worn off top edge of bell. Plan wooden handle. Stamped with name, number, etc.HUSQVARNA 10 one side; also on attachment holder. RELIANCE/MADE IN SWEDEN + five pointed star on other side. "H" stamped on crank inside.husqvarna, mincer, hand, kitchen tool

Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993.Small black bakelite irrigator nozzle. There are 7 entries in the nozzle head. Small ridge around neck of nozzle.irrigation, midwifery

This type of steriliser was in use from approximately 1907 onward. Designed for surgeons who frequently moved from hospital to hospital. The body and lid of the steriliser were made from one continuous piece of metal to produce a germ-free surface. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Metal instrument steriliser. Consists of a rectangular metal container with lid, an internal metal tray, and two spirit burners. The lid has a small wire handle at either end. The internal tray also had two handles and in perforated with holes to allow for drainage. The upper edge of each burner has a series of eighteen holes in the rim. disinfection

The metal probe in this set (.6) was used to puncture superficial skin blisters or eruptions and to probe suspected pus filled wounds. The Mayo scissors (.7) was (and still is) part of all major and minor suturing sets. It is also used in general theatres.Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Pocket dressing case containing surgical tools. Case [185.1] is made of cream household chamois, with two end flaps and small overlapping front piece to indicate the front of the case. Middle of the case has a strip of chamois divided into nine sections to hold the instruments. Tools contained in the case are: straight Spencer Wells artery forceps x2 [185.2,185.3], Allis box jointed tissue forceps x2 [185.4,185.5], straight probe [185.6], curved Mayo scissors [185.7], straight dissecting forceps [185.8], catheter (female) [185.9], straight McPhail needle holder [185.10]. Artery forceps 185.2 are stamped with '19' on both inner arms. Tissue forceps 185.4 are stamped with "2" on inner arm. Tissue forceps 185.5 are stamped with "8" on inner arm. Mayo scissors 185.7 are marked with '"1". Dissecting forceps 185.8 are marked with "1".surgery

Prior to the 1900s, complicated births, particularly where there was a disproportion between the size of the woman’s pelvis and the foetus’ head, often meant the death of the baby and the mother. Instruments for removing a dead or ailing foetus from within the mother were used to attempt to save the mother’s life. The cranioclast, first invented by Dr. James Simpson in the mid-19th century and later redesigned by others, was used for fetal destruction and removal. Fundamentally a strong pair of forceps, the cranioclast was used to crush the skull, decreasing its diameter. In some cases, this would allow normal uterine contractions to expel the foetus; in others, the physicians would use an obstetrical hook to pull the body out of the mother. Doctors disagreed as to the pelvic diameter that would necessitate this drastic intervention, but generally found that 3 to 3.5 inches was the smallest size through which a living infant could pass. Equally of debate was the pelvic size through which the dead fetus could be extracted. When vaginal extraction was deemed unadvisable, Caesarian section would be performed. As caesarean section became safer and more common with the advent of anaesthetics and antiseptic techniques, the use of cranioclasts and obstetrical hooks diminished. (Museum of Health Care, Kingston) Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hinged metal tool with bakelite handles at one end and serrated teeth at other end. The instrument is in two sections. The right or upper blade has a black bakelite handle. There are two screws on the inside of the handle, 5.5cm apart. In the centre of the blade is a screw notch in the shape of a small horseshoe. On the inner side of the blade is a depression extending most of the length. The left, or lower, blade also has a black bakelite handle. There are two screws on the inside of the handle approximately 6cm apart. Mobile metal clasps in the shape of an 'S' , with three serrations, is attached to the distal end of the handle, which enables the blades to be opened or closed. destructive instruments

Metal tongue depressor with anaesthetic tube attachment. Consists of proximal and distal blades, and a blade shaft. "4" marking on the upper distal end of the blade. There is a short metal tube alongside the proximal flange, attached to the upper section of the flange, which is turned inwards and down with a small bulb on the end. Plastic or rubber tubing can be attached to this bulb. There is a smaller rounded flange at the distal end of the shaft.