Note written on white paper and dated Oct 7 18?1. He had examined Chas ? And found him in a good state of health. Signature illegible.societies, aof, correspondence, ancient order of foresters no. 3770 collection - correspondence

Stawell Primary School 502 - c1970s school with steel fencing. Now glass.Photo Taken from roadway with picket fence and Bell Tower visible. Two gentlemen in top hats on footpath. Street has not yet had guttered installed.stawell education

Stawell Primary School 502 - c1880's taken from Barnes Street School opened in 1875 so this photo could be from that time.Photo Taken from roadway with picket fence and Bell Tower visible. Two gentlemen in top hats on footpath. Street has not yet had guttered installed. education

It would appear that a mail box had been donated to WHS Museum in 1981 and being unwanted, Nunawading Council was approached to find a use for it and it was placed at the Mitcham Station.It would appear that a mail box had been donated to WHS Museum in 1981 and being unwanted, Nunawading Council was approached to find a use for it and it was placed at the Mitcham Station.letter boxes, australian post, schwerkolt cottage committee of management, mitcham railway station, city of nunawading

Four photographs showing destruction caused by a mini tornado to a Nissen hut on 8 June 1978 which had been used for storage of vegetables and feed for fowls.bendigo, institutions, sandhurst boys centre, storm damage; tornado;

These photographs were taken in and around Falls Creek by Samuel Keith Pearce and printed for him as a foldout postcard by NuColor Vue. The postcards state they were printed for S. K. Pearce Pty. Ltd of Tawonga and Mount Beauty. Samuel Keith Pearce was born on 24 June 1917 in Armadale, Victoria. By the late 1940s he owned the Mt Beauty Supermarket, Newsagency, Drapery and Hardware store at Mount Beauty and also a store at Tawonga in partnership with his brother Gordon Cathew Pearce. For some time, they operated as Pearce Brothers. In the early 1960s Keith also opened a mini mart In Falls Creek. As well as being a keen photographer and an astute businessman, Keith Pearce was a well-known identity in the Kiewa Valley, making many contributions to the development of the area over a long period. This included serving as a member of the Bright Shire Council for many years. He worked hard to promote the interests of the Upper Kiewa Valley. As a sign of recognition and appreciation for his contribution to the community, the park opposite the grocery store in Mount Beauty was named the SK Pearce Gardens in his honour. Samuel Keith Pearce died on 7 July 1994 in Mount Beauty, Victoria.This collection of postcards and images is significant because they were commissioned by a highly successful businessman in Falls Creek, Victoria.A colour image of the Kiewa River at Tawonga with mountains in the background. S. K Pearce had a business in Tawonga and established other stores at Mount Beauty and Falls Creek.falls creek, falls creek chairlifts, poma lift falls creek

A ligh gray coloured cover that had black writing on the front. Note: Most of the writing has been erased.There is a black binding down the left hand side.australia - armed forces - service manuals, patrolling and tracking

Matching wooden butter pats. Flat, rectangular-shaped, grooved on one side. Wooden paddles used to work/shape butter after it had been churned.butter pats

Two photographs showing destruction caused by a mini tornado on 8 June 1978 to a Nissen hut which had been used for storage of vegetables and feed for fowls.bendigo, institutions, sandhurst boys centre, storm damage; tornado;

Folded, colour brochure describing an underground tourism experience that can be had at the Central Deborah Gold Mine, Bendigo. A trip on the Vintage Talking Tram is also encouraged. central deborah gold mine, gold, tourism, underground mining

Set of three Black and White photos of unknown date and photographer: 1 - Photo shows MMTB AEC Mk III bus, on a Footscray route late 1970's doing the U-turn at the intersection of Queen and Flinders Street Melbourne. These bus chassis were built by AEC in the UK between 1951 and 1953 and bodied by Commonwealth Engineering (Comeng). This particular bus was tendered for sale in July 1980. 2 - Three MMTB Mk 4 buses stored at Clifton Hill depot prior to their sale Numbers 618, 604 and 607. All showing Clifton Hill. 618 has an advert for Bosch. The chassis for these buses were built in 1956 with the bodies by Lawton Pty Ltd of Adelaide. Buses 604 and 607 were offered for sale during July 1980. 3 - three Mk III buses, numbers 583, 584 and one other at a depot during the early 1980's which had been converted to ambulances for use during state disasters. Based on the reference 3rd reference document, there were four buses converted - 581 to 584 and were sold during 1980. (See Metlines -3/1990 - Reg Item 1185 for possibly a later conversion) Yields information about the buss that were used in Melbourne during 1960's and 1980's.Black and white photograph of: 1 - MMTB Mk III, AEC bus No 348 in Queen St Melbourne. 2 - Three MMTB Mk 4 buses at Clifton Hill depot 3 - Three Mk III buses that had been converted to Ambulances.trams, tramways, mmtb, buses, aec mk iii, footscray, commonwealth engineering, comeng, aec mk 4, bosch, clifton hill depot, ambulances, queen street

Heavy duty cast iron kettles were used as a domestic item to boil water safely without the concern that the metal may contain lead or arsenic as earlier utensils had. The household depended on constant hot water availability for all cooking, washing and other household chores.A large vintage rusted black cast iron heavy kettle with no lid. It has a flat base and mushroom shaped handle welded onto the pot below the rim of the pot opening. It has a rim to position the teapot lid. The goose neck spout has a shaped pouring end. It was used as a domestic item to boil water safely without the concern that the metal may contain lead or arsenic as earlier utensils had.kitchenware, kettles, kitchen equipment

Schuss was advertised as Victoria’s Official Ski Journal It was issued monthly from 1935 to 1961 except during the war when summer issues covered two months. This continued after the war, but it averaged 10 issues annually over its 25 year life. Schuss was published by the Ski Club of Victoria which had a membership of 38 Ski Clubs and demanded to be recognised as the prime authority on skiing in the state. The other 30 ski clubs with 85% of the members disagreed and the politics of skiing became heated. These clubs formed the Federation of Victorian Ski Clubs with their own journal, Ski Horizon. With the establishment of the Victorian Ski Association, Ski-Horizon published its last issue in Nov - Dec. 1955 and the role of the official journal was fully taken over by “Schuss”. This item is significant because it contains stories, images and information documenting the development of the ski facilities at Falls Creek.The journal features stories and events chronicling developments in Victoria and internationally. The cover shows a group of skiers descending the slopes. Page 61 described work that had been carried out at Skyline Lodge reading for the coming season. Page 64 included an advertisement for exclusive accommodation at Snow Crystal Inn.schuss journal, skyline lodge, snow crystal inn

SKI TICKETS Before tows and lifts were introduced at Falls Creek, it could take skiers 20 minutes to climb to the Summit … but only TWO minutes to go back to the bottom. The arrival of tows, then chairlifts and T-bars changed the face of skiing forever. The first rope tow was constructed by Toni St. Elmo for the 1951 winter season. Bob Hymans installed a smaller tow for his guests at Skyline Lodge. Tows were still quite slow, so in 1956 Bob Hymans created his single chairlift. In 1958 the Village rope tow, designed by Albury engineer Jock Wilson, opened. It was financed by shareholders including Bill Griffith (Bowna Ski Club) and the Bridgford family (St. Trinian’s Ski Club). Several other tows followed including the Summit T-bar in 1961, built by Ron McCallum and operated by Alpine Developments Pty. Ltd. which was a company formed by C. H. (Bill) Bridgford. By 1982 Falls Creek was served by 16 different lifts or T-bars, all owned and operated by Alpine Developments (Holdings) Pty. Ltd. During the development of Falls Creek, different methods have been used to pay for the use of tows, lifts and T-bars … including metal tokens, single tickets, strips of tickets and season passes. The Falls Creek Historical Society Collection includes many examples of these items.This ski pass is significant because it was issued to a pioneer of the ski industry in Falls Creek, Victoria.A plastic covered ski pass for Axamer Lizum resort in Austria. It was issued to C. H. Bridgeford. in 1968. Charles (Bill) Bridgeford built a family lodge called St. Trinian's in the early 1950s. Bill had previously worked in the family shipping firm and had been Member for South Eastern in the Victorian Parliament. He became one of the shareholders in the Village rope tow which had been a failure partly because too many people had been involved. In 1960 Bridgeford approached Toni St. Elmo with an offer to buy the Nissen tow and Nissen Lodge which was accepted. With friends Geoff Henke and Ron McCallum, an engineer, he formed Alpine Developments (Holdings) Pty. Ltd. Ron had also been Lift Manager at Mt. Buller and together they acquired the Village rope tow and replaced it with a T-bar. They gained the franchise to operate all ski lifts and T-bars and later the Falls Creek Ski School. Alpine Developments (Holdings) Pty. Ltd continued to expand the lift network until 1983 when the lifts were sold to Transfield.On front: Photograph and text Innsbruck Olympics 1964 logo in top right Tage M Axamer Lizum № 000157 Gültig für alle Sessel-und Schlepplifte (Valid for all chairlifts and drag tows) 15. FEB. 1968 until 21. FEB. 1968 Preis laut Tarif (Price according to tariff) On back: Condition of use in German, English and Frenchcharles bridgeford, alpine development holdings pty ltd, ski pass, axamer lizum resort

The spade is a memento of the planting of a tree by the responseible Commonealth Minister to recognise the contribution of ATCV and ATCV volunteers to repair of the Australian environment. At the time ATCV had been operating in Ballarat for six years. ATCV volunteers had planted 192,000 trees from April 1987- March 1988. Senator Richardson was then Minister for the Arts and the Environment in the Hawke ALP Government and on 17 November 1988 he planted a tree using this spade at Sovereign Hill Outdoor Museum (at which ATCV volunteers had planted trees which are (by 2010) fully grown and a significant feature of the site). Peter Hiscock was director of Sovereign Hill as well as President of ATCV and among the most significant leaders of ATCV (now CVA). The spade also symbolises the recovery of ATCV (then a small and struggling community group) from near closure owing to the effects of the 1987 recession. The Cyclone Sylvaspade concept was component project of the Australian Bicentennial celebrations aimed at recognising organisations which had contributed positively to conservation of Australia's environment. The concept was originated and driven by Dr Wilf Crane of the CSIRO Division of Forestry and a highly regarded forester and environmentalist and champion of the cause of rejuvenating Australia's degraded landscape with trees. At the naming of a road after him in Canberra he was described as a: "enthusiast, a man of conviction, action, humility and simplicity". Wilf conceived the project, developed the tree planting spade with Boral Cyclone and the Institute of Foresters of Australia and launched it with the then Governor-General Sir Ninian Stephens at the new Parliament House. Cyclone has been a brand name for a manufacturer of good quality hand tools for over a century. It is likely manufacturing was still done in Australia at the time of manufacture of the Sylvaspade. Much of it has now moved offshore, particuarly to China and Taiwan.This object is historically significant because it is a memento of a significant national event, the 200th anniversary of European settlement and the start of a process of environmental change which has had negative consequences and which demands a commitment to conserving the uniques Australian national environment. It recognised the achievement of ATCV in tree planting over six years. The Cyclone Sylvaspade is a practical memento and having the responsible Commonwealth Minister plant a tree with it was highly symbolic of ATCV's practical commitment to repair of our environment all over Australia. It was also used by the Victorian Premier, Hon John Brumby, to plant a tree at the reopening of the Boral Asphalt plant, Ballarat, in April 2010. The spade is No. 12 of a limited edition. This item is a functional tree planting spade called a "Cyclone Sylvaspade", mounted on a block of wood with a plaque. The handle of the spade is made of grey plastic, the haft is light, stained wood, and the blade is manufactured to resemble silver and has engravings. It was donated by the Boral company and presented to ATCV by the Minister of Arts and the Environment, Senator Graham Richardson after he had planted a tree to mark the occasion at Sovereign Hill Outdoor Museum, BallaratOn the stem of the spade here is a label showing the logo of the Boral company which reads "SYLVASPADE Tree Planting Spade - Made in Australia." On the blade is engraved "Cyclone - NUMBER 0012 - SYLVASPADE - 1788-1988" together with the logo of the Australian Bicentennial Authority. The spade is mounted on a sturdy polished wooden board on which there is a brass-coloured plate bearing the words: "PRESENTED BY SENATOR THE HON GRAHAM RICHARDSON TO AUSTRALIAN TRUST FOR CONSERVATION VOLUNTEERS IN RECOGNITION OF THEIR CONTRIBUTION TO THE ENVIRONMENT 17TH NOVEMBER 1988 DONATED BY BORAL LIMITED"of, trust, ballarat, memento, australian, australia, environment, conservation, atcv, for, volunteers, cyclone, sylvaspade, senator graham richardson, 1788 1988 australian, bicentennial, boral, spade, sovereign hill, 17th november 1988, 1988, minister for arts and environment, tree planting, institute, foresters, dr, wilf, crane

Woolen putees worn as lower leg protection. These were wrapped around the lower leg from the top of the ankle boot upwards and tucked into the top to offer some sort of protection from the elements, wire entanglements and to prevent loose clothing from becoming a hazard. Officers had high topped bootd and Mounted personal had leather leggings. These were for the rankl and file infantry and other members of the forces.

This machine was made in Baden, Germany, for the Ward Brothers of Melbourne, who imported machines from various manufacturers and had them branded with their Ward Brothers decals. This machine is most likely dated before 1911, when the Ward Brothers became two separate businesses, as one of the decals appears to have been deliberately removed. The case is made in an attractive design and the machine itself has decorations that are pleasant to the eye. Even the metal cover of the folding handle has a swirling design on it. The machine has the added bonus of a ruler along the front base. Many sewing machine manufacturers in Germany produced their machines specifically for export. A company could mass-produce its machines and give the same product several different brand names, according to their overseas buyers. There was a huge market for domestic machines as it enabled tailored clothing to be made in households at a fraction of the retail prices. Ward Brothers began in Australia in the late 1890s and early sewing machines sold by them had the three brothers on their decals. In 1911 the brothers divided into two separate firms, one operating on his own, the other two remaining together, and all still operating in Melbourne and at first still using the name Ward Brothers.This sewing machine is one of two hand-operated Ward Brothers machines in our collection that were made in Baden, Germany, and the only one that has had the three Ward Brothers on its decal, and that has front and rear slide plates. This machine represents the early domestic market for sewing machines, making it possible for the everyday homemaker to produce fashionable garments and linen ware that was affordable. The owner of this machine could work at more than one location as it was portable and did not require a large space to set up. The machine is associated with the well-known Ward Brothers of Melbourne, who sold imported sewing machines that were branded with their own name. Sewing machine, hand operated, in wooden case. The machine is painted black with gold decals, and front and rear slide plates. The wooden base of the machine has an inlaid ruler. The case has curved sides and shaped ends, decorative woodwork on corners, an inlaid diamond pattern on top, and a folding metal handle. Accessories are included. The decals include doves, inscriptions and swirls, and there is a map of Australia with two portraits of men. The machine was made in Baden, Germany, for Ward Brothers, Melbourne. Images: Map of Australia with States marked, and with portraits of two men. [A portrait-sized area on the left of the men has had the image removed.] Text in printed script: "Specially / Made in Baden" "WARD BROTHERS / MELBOURNE" " with a Logo is a map of Australia,flagstaff hill, warrnambool, great ocean road, sewing machine, hand operated, pre-1911, domestic sewing, homemade clothing, fashion, ward brothers, made in germany, baden, front and rear slide plates, crank handle, hand crank sewing machine

The photos show President Geoffrey Swan presenting a plaque to Bradley Marks, in recognition of the fundraising efforts of Year 6 boys at Brighton Grammar Junior School. For many years the boys from Brighton Grammar Junior School raised money from the sale of Legacy badges and the President would present them with a plaque of appreciation. Between 1991and 1995 the boys have raised in excess of $16,000. The label mentions that they are standing in front of a tree planted in honour of a late Legatee Tom Bell. In other years the presentation is made in the same spot. (see items at A record of Brighton Grammar School fundraising for Legacy.Colour photo x 2 of boys at Brighton Grammar with President Geoffrey Swan and a white paper label.Label is typed and describes Legatee Swan presenting a plaque to Year 6 boys how had raised money for Legacy. fundraising, brighton grammar

Photograph of W2 class tram 496 (Route 12, St Kilda, Fitzroy St) in Danks St Middle Park, with Mills St in the background, passing a track repair gang with the power for welding being taken off the overhead. Photo by Ron Hood Sept.1971.Yields information about tram 496 and track work repairs in Danks St Middle Park during Sept. 1971.Colour slide in a hanimount cardboard mount.in ink "279 I Had just arrived back in Australia from New Zealand. St Kilda, next Day"tramways, route 12, tram 496, track work, welding truck, danks st

Colin Thomas Findlay No 1041, C Coy 38th Bn AIF. Enlisted 15.3.1916 age 23 years, embark for England 20.6.1916, embark for France 22.11.1916, promoted to L/Cpl 3.2.1917, WIA 2.6.1917 GSW Left Shoulder, rejoin unit 10.7.1917, WIA 2nd occasion 4.10.1917 SW Head severe, RTA 12.8.1918, discharged from the AIF 20.8.1918 medically unfit.Photo Sepia tone rectangular shape, soldier in uniform with hands behind back, shed and trees in the background. Original photo postcard had a pencil written enscription on rear.Original wording, “ 2.11.1916, To Alf, Wishing you a Merry Christmas and a Bright and prosperous New Year, from Colin”photographs, 38th bn, c coy

Nunawading Cr Charles Leslie Willis, known as Jimmy Willis, died 8 Dec 1977 at the age of 76. He had served on the Nunawading council for 40 years.city of nunawading, councillors, willis, jim

WWII historic signficanceMilitary water bottle in khaki container with webbing shoulder strap. Blue enamel body with felt covering (for insulation). Held approximately 1 litre. Had a cork stopper. The name 'ELLISON' is written on the strap