Showing 590 items
matching seamer
-
Flagstaff Hill Maritime Museum and Village
Clothing - Child's Dress, 1910's
This child's white linen day dress was worn by Robert Barnard, son of Mrs W N Barnard of Portland, when he was a young child.This child's dress is representative of child's fashion of the 1910s.Child's white linen day dress; hand-sewn dress with pleated skirt, short sleeves and a plain bodice. The neckline and sleeves have a rick-rack braid and crochet trim. The back closure has four buttons, a hook closure and a short back seam. c. 1910. Worn by Robert Barnard son of Mrs W N Barnard of Portland. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, robert barnard, mrs w.n. barnard, w.n. barnard of portland victoria, child’s dress 1910’s, 1910, child's dress -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This brown glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe. A piece of soft glass would be added to the mouth, then the double collar would be formed. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, brown glass, rough surface, uneven colour. Crude, applied mouth with double collar; wide straight upper, ring lower. Slightly bulbous neck. Shoulder seam. Body tapers inward towards base and has smooth ripples. Shallow base with wide heel. No obvious pontil mark. Sediment inside bottle. Glass is scratched in places. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, brown glass, ale bottle, beverage bottle -
Whitehorse Historical Society Inc.
Clothing - Pyjamas
Two piece pink pyjamas Top and pants. Top has 'Chinese' collar, two soft ties at neckline and a 2cm wide silver embossed braid around the collar and a down deep centre opening. Silver braid outlives sleeveless openings. Side seams have 17cm splits bordered with silver braid. Pants are short and have elastic waistband.HILTON Lingeriecostume, female nightwear -
Brighton Historical Society
Accessory - Gloves, 1900
These gloves belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A pair of very fine ivory doeskin evening gloves. The gloves feature full pique insert seams around the fingers and thumb with a slit on the inside arm from mid thumb to mid fore arm and three white shell buttons. The gloves extend high to high on the upper arms and feature a ribbon covered elastic to aid hold on the upper arm. A black ink stamp on the inside of the right glove over the wrist: 5 3/4, Made in France, Buckley and Nunn Limited, Melbourne. A black ink stamp on the inside of the left glove over the wrist: Grand Prix Exposition, 1900, Medallere D'or, Merlier, Depose (? Very faint), Made in France. A blue ink stamp on the inside of the left glove over the top side of the wrist: 797, 221'65, C51Cwoolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, clara miller, gloves, caulfield, brighton general cemetery, 1900s fashion, buckley and nunn -
Bendigo Historical Society Inc.
Clothing - MEN'S BLACK WOOLLEN SWIMMING TRUNKS, 3/10/1943
Donated by the great niece of Richard Harry Adams Flight Sergeant Richard Harry Adams, Date of birth 6/2/1922. Place of birth, Brighton Victoria. Brighton State School and Hampton High School. Completed Merit Certificate on 18.12.1936. Enrolled in architectural draughtsman course at Melbourne Technical College May 1938 - May 1940. Occupation in civil life Architectural Draughtsman, applied for RAAF air crew 30.4.1940. Listed sports and games: running swimming, tennis, shooting, bicycle riding, cricket, camping, 8 years' scouting experience and a member of the YMCA. Enlisted 21.6.1941. Conflict/operation: 2nd World War,1939-1945, Height 5'11'', Weight 10 stone 5 lbs. NoK: Father Albert Ward Adams, Rate collector. Place of enlistment, Melbourne. Service No. 409012. Embarked at Sydney 2.11.1941. Service RAAF No. 1449 Flight (RAF). Date of death, 3.10.1943. Place of death Scilly Islands, Cornwall, UK. Aircraft: Hurricane WL BD 729 - Single-engine, single-seat monoplane fighters/fighter bombers. Casuality notification for ''P'' file. Name:409012 F/Sgt. ADAMS, R, H. Att. RAF U.K. Nature of casualty: Missing believed, killed air.ops from UK. Casualty Report No. 280. Date 3 October 1943. C.D. 155/43 ZMen's black woollen swimming trunks. Wide ribbed horizontal pattern. Front skirt panel over trunks. Decorative double line of black and white zig zag seams forming belt keeper loops at waist. Embroidered patch on lower front of LHS with a picture of a sailing yacht. White cotton woven belt with silver coloured clip fastener.costume, male, swimming trunks -
Bendigo Historical Society Inc.
Clothing - HELEN MUSK COLLECTION: PURPLE LINEN COAT
Lightweight knee length linen coat with long sleeves. The coat is single breasted with a V neckline with a fold over collar of black linen fabric. There are two rows of black cotton piping on the edges of the collar. The front is made up of four pieces. The two centre panels are shaped at the bust line. The two side panels are narrow at the shoulders and flare slightly from the hip line to the hem line. There is a decorative line of stitching on the front seams. The front of the coat is fastened with three black buttons (2 cm) and button holes. The back of the coat is made up of three pieces. The centre panel is shaped in at the waistline. The two side panels are narrow at the shoulders and flare slightly from hip line to hemline. The two back seams each have three decorative black buttons (2 cm) vertically between bust line and waist. There is a decorative line of stitching on the back seams. The coat has long set in sleeves shaped at the elbow and with black linen cuffs (10 cm). There are two rows of black cotton piping on the top edge of each cuff and one row of black cotton piping on the lower edge of each cuff. There is a 14 cm cotton tape hanging tag stitched inside the coat just below the collar on the back. Machine stitched.costume, female daywear, linen coat -
Bendigo Military Museum
Uniform - TROUSERS, MESS DRESS, ARMY
Uniform trousers issued to S/SGT "Brian Thompson", 316 221. Years of Service 1973 - 1993.Trousers - black colour wool fabric with two side pockets, five button fly, red colour wool piping stripe down each side seam. At ankles there are fabric straps with two buttons/ buttonholes - stirrup pant style. Black colour plastic buttons. Cream Colour cotton fabric lining to waist and pockets. Buttons on inside of waistband for attachment of braces.uniform, army, mess dress trousers, brian thompson -
Bendigo Military Museum
Equipment - POUCH WITH HANDSAW, Jabez Cliff & Co, 1918
Item from 17th Light Horse Regiment collection..1) Leather rectangular pouch, stitched seams, brass stud closer, leather straps at rear to attach to belt, stamped maker's labels. .2) Metal & brass tool, saw toothed teeth, linear shape, 2 brass eyelets on ends to attach brass & timber detachable handles, handles cylindrical shape. .3) Metal file linear, 3 flat sides.Stamped on belt strap: "Jabez Cliff & Co Walshall 1918"trades-tools-saws, containers, military equipment - army, passchendaele barracks trust -
Flagstaff Hill Maritime Museum and Village
Domestic object - Bottle, 1850's - 1900's
This bottle is sometimes referred to as a black glass 'Gallon' bottle. It is used for storing and transporting liquor such as stout, porter or ale. Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020. The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases and other medical issues before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s-1900s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. Bottle, glass, solid dark brown (black), round, matt surface. Glass ring below mouth, neck is slightly bulbous, seam line around shoulder, body tapers slightly inward from shoulder to base. Base is concave with pontil mark. Bottle has a white mark down the side. No inscription. Generally used for storing stout, porter or ale.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, handmade bottle, handmade english beer bottle, pontil bottle, black glass, gallon -
Flagstaff Hill Maritime Museum and Village
Container - Medicine Bottle, J.C. Ayer & Co, 1868-1878
The glass medicine bottle is an example of an early 20th-century medicine bottle. Moulton glass was blown into a two-piece mould and a tool with an inscription was used to stamp the base. The mouth was added after the bottle was blown. The bottle has encrustations and residue on the surface of the glass. The cargo of the Falls of Halladale included medicine. It was made by Ayer & Co. and its shape and maker's mark matches one of Ayer's early style bottles that contained J.C. Ayer's Hair Vigor, which was made from about 1868 to 1915. James C. Ayer, born in Connecticut, US in 1818, was a medicine manufacturer. His first medicine was Cherry Pectoral, for pulmonary illness. His medicine was very popular in the 1850s. Ayer died in 1878. A section of his home town Groton Junction was nameed 'Ayer' in his honour. The FALLS of HALLADALE 1886 – 1908: - The sailing ship Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roof tiles, barbed wire, stoves, oil, benzene, and many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The ship had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The medicine bottle is an example of medicine containers in the late 19th to early 20th century. It is also significant for its association with the historic cargo ship Falls of Halladale, wrecked in local waters in the early 20th century. The ship is listed on the Victorian Heritage Register, No. S255. It was one of the last ships to sail the Trade Routes and one of the first vessels to have fore and aft lifting bridges. The ship is an example of the design, materials and fittings of a late-19th-century sailing vessel. Its cargo represents several aspects of Victoria’s shipping trade. The wreck is now protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act 1976.Clear glass bottle with a green tinge. The bottle has a rolled applied lip, narrow mouth, slim neck, rounded shoulders and straight rectangular body and an indented base. The body has side seams and irregular thicknesses of glass. Glass has imperfections and bubbles, and one shoulder is missing. An embossed inscription is on the base. The bottle was recovered from the wreck of the Falls of Halladale. "AYER"flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, falls of halladale, iron ship, four-masted ship, sailing ship, clipper ship, windjammer, shipwreck, peterborough, 1908 shipwreck, russell & co., fore and aft lifting bridges, medicine bottle, health care, ayer, j c ayer & co., james c ayer, hair vigor, men's hair care, personal care -
Federation University Historical Collection
Costume, Ballarat Teacher's College Blazer, c1948
This blazer was worn by Helen Veitch in 1948, while a student at the Ballarat Teachers' College in Dana Street. She lived in Ascot Street South and attended the Urquhart Street Primary School. The first class she taught was grades 1&2 at Wedderburn Primary School with 46 students. She also taught at Wendouree West, Wendouree, Urquhart Street and Pleasant Street Primary Schools. She married in 1955 and died in 1979.This royal blue woollen, unlined blazer is bound on all the edges with braid including the tops of the three pockets and 8.5cm from the sleeve edge. The embroidered patch breast pocket has the emblem of the Ballarat Teachers College. It has three buttons at the front. Most of the seams are bound, though some are turned back and stitched down. The back of the top of the pockets are reinforced with cotton fabric.Maker's embroidered patch - Paterson, Powell Pty Ltd, Ballarat White tape with handwritten marking - Veitchblazer, helen veitch, costume, textiles, logo, embroidery -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1870s
This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Double ring collar blob finish on neck; upper is wide and rounded, lower is a thin ring. Diagonal lines in glass on neck, low shoulder mould seam, rippled texture around body. Push-up base with pontil mark, rectangular impression in heel. Uneven base. Sediment on inside surfaces.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid-to-late 1800s
This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Lip is double; rounded upper, flared lower. Neck is slightly bulbous. Body has shoulder seam, then tapers inwards to base. Concave base with small pontil mark. No inscriptions. Handmade in mould. Body has sediment inside, top to bottom. Glass is worn down one side. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle, bulbous neck -
Bendigo Historical Society Inc.
Clothing - SILK LACE CAMISOLE, Late 19th C, early 20th C
Clothing. Camisole. Silk lace. Straight straps made from 8 cm wide lace strips attached to bodice. Made of one rectangular piece of fabric, with one seam on right side. Strip of eyelet lace Eyelets top and bottom edges of garment. No ribbon threaded through eyelets. Lace border on lower edge has small pointed peaks.costume, female, underwear -
Whitehorse Historical Society Inc.
Clothing - Skirt, c1890
Skirt belonged to Grace Begg(born 15-9-1857). Worn by her at Mt Carmel sheep station, near Heathcote, Victoria. Station managed by her father John Begg. Grace married Russell Scott Thomas on 2 August 1890 at Heathcote and later lived in Albert Park. She was grandmother of Russell Alexander of Creek Road Mitcham (Russell Alexander Menswear Mitcham). His wife Coral wore the frock on occasions.c 1890 Black grograin material skirt, two double inverted pleats in front, two flat covered buttons and four acorn shaped buttons (covered) joined with rouleaux to the shape of frogs. Lined with silk and black velvet edging around the lower edge. Open at back with a placket closed with hooks and eyes. Two pleats each side of centre back seam.costume, female -
Northern District School of Nursing. Managed by Bendigo Historical Society Inc.
Uniform - Trainee Nurse Uniform Cape
Northern District School of Nursing nurse's capeA red unlined cape with collar. Hook and eye at collar front. There are bands applied to outside shoulder of the cape on both sides and constructed with a centre back seam. The cape was worn outside the hospital when walking from accommodation. The accompanying documents are a photo of the original owner and donator of the cape, Vicki Simpkins, and a photo of the graduation group of nurses, 1972, in which Vicki is indicated.There is a white cotton label at rear inside centre collar with 'PURE WOOL' printed in blue and 'W' printed in red. A blue arrow has been added to the graduation photo above Vicki Simpkins' head. The photo of Vicki has the inscription in black pen 'To Mum and Dad with all my love Vicki xx June 1970". At base right of photo is photographer's name 'martin washington'. nurses uniform, northern district school of nursing, cape -
Brighton Historical Society
Swimsuit ensemble, Watersun
Polish-born designer David Waters first began producing swimwear in 1952. His mother Halina had recently opened a stall at Melbourne Queen Victoria Markets and was looking for swimsuits to sell; unable to find any she liked, she asked David to design something. He began making swimming costumes using his mother's sewing machine, in between his shifts working at a knitting factory. He had soon set up a small business in his parents' home, cutting patterns in one room while a machinist sewed them together in the next. His company, which he named Watersun, would become an iconic Australian swimwear label. During the early 1960s, Watersun developed its "Unquestionable Bra", an inbuilt moulded bra which was marketed as giving wearers a more natural bustline than other labels. The company was also known for its matching swimwear and beachwear, producing dresses, kaftans, tops and skirts in identical colours and prints to those used for many of its swimsuits. By 1967, the company was reportedly one of Australia's two biggest swimwear manufacturers, with over one hundred employees. Watersun was sold to Ada Productions in 1984 and was later acquired by Trackerjack Australasia. This swimsuit is believed to be one of a large quantity of samples, seconds and unsold Ada Productions stock donated to Brighton Historical Society in late 1990 by Brian Samuel, who worked at the company between 1979 and 1990.Two-piece swimsuit with navy blue and white horizontal stripes. Cropped top (.1) has inbuilt underwire bra and metal fastening at back. Shorts (.2) are high-waisted with longer legs. Matching top (.3) has diagonal navy and white stripes and an asymmetrical hem. Sleeveless with round neck. Velcro fastening on shoulder and side seam of shorter side. No label.swimwear, watersun, david waters, ada productions, melbourne designers -
Whitehorse Historical Society Inc.
Article, CEO Points Finger In Civic Centre Blow-out, 14/05/1997 12:00:00 AM
... seamer ...blow-out in Nunawading Civic CentreFormer Commissioners blamed for blow-out in Nunawading Civic Centre of $390,000. blow-out in Nunawading Civic Centreseamer, peter, wright, stephen, dunstan, david, abbott, kevin, allan, spurr, noel -
Whitehorse Historical Society Inc.
Article, Uproar over new units, 29/10/1997 12:00:00 AM
... seamer ...Mitcham residents and the Nunawading and District Historical SocietyMitcham residents and the Nunawading and District Historical Society have joined the growing list of objectors to a proposed 16 unit development at the corner of Mitcham Road and Meerut Street on the site of one of the few remaining historical homes in the area. The house was built in 1934 by Stanley and Helen Walker. Mr Walker's family was owner and operator of the Australian Tessellated Tile Company, an important industry for Mitcham and Victoria. The house was recognised in the 1994 City of Nunawading Heritage Survey Project and was classified as being of high local significance,Mitcham residents and the Nunawading and District Historical Societymitcham road, mitcham, meerut street, walker, stanley, helen, arrowsmith, valda, daly, peter, seamer -
Bendigo Historical Society Inc.
Clothing - LADIES CREAM SILK PAJAMAS, 1930's
Clothing. Cream silk embroidered sleeveless top with a neckline at front and back, which is edged with a fine rouleau binding. The fine silk binding also edges rhe sleeveless armholes. The fabric is woven with a floral woven design. A 2 cm wide tie attaches to the side seams 13 cms below the armholes.The top is sleeveless, and the hemline which is rounded at the side seams, is finished with a self fabric binding. Silk shadow embroidery trims the front neckline, and extends to the midriff. Embroidery is in a floral design. The pyjama pants are full length, with a fine bound finish - probably at or slightly above the ankles. An 11 cm deep V shaped panel at the front waistline, and an elastic casing at the back waistline. A panel of shadow embroidery decorates the side hemline. A small dart, 6 cm long, from below the armhole on either side of front bodice.SILK and RAYON MADE IN CHINAcostume, female, ladies cream silk pyjamas -
Montmorency/Eltham RSL Sub Branch
Functional object - Mess Tin WW1, WW1 Mess Tin, 1916
Mess tins were used to prepare or heat food, but thay were also used as a container from which to eat or drink. The tins are lightweight and sturdy but they became hot very quickly when heated.Used by Australian military servicemen during WW1Two piece "D" shaped silver coloured metal mess tin and lid. Used by Australian military servicemen during WW1, it is believed to be based on a British design. Made of tin plated steel, this mess tin has a wire rod carrying handle and rectangular metal wire clips for a shoulder strap, attached to the top section of the mess tin by metal rivets and straps. There is a metal wire rod folding handle mounted on the inside of the removable lid section. The mess tin has a folded seam on the bottom edge and along the left hand side. A wire rod is mounted around the top section of the mess tin as a base for the removable lid. The lid has a folded metal seam on the top edge and along the left hand side. The bottom edge of the lid is folded around a metal wire rod.A. SIMPSON & SON LTD 1916 ADELAIDEmess tin, ww1, australia, military, metal, two piece -
Montmorency/Eltham RSL Sub Branch
Equipment - Canteen, Water, Circa 1960s
Used by Australian Army circa 1960s.Used by Australian Army circa 1960sUnpainted US style aluminium canteen formed by two seam welded halves (front and back sides) with an aluminium threaded top for attaching a top to the water canteen. The water canteen has a black plastic screw top lid attached to the neck by a metal link chain. The front of the water canteen is bowed outwards with the back being flat with a curved top doorway shaped indentation.australian army, water canteen, aluminium -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid-to-late 1800s
This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Lip is straight, deep, with thin horizontal lines in glass. Neck has gradual flare, body has side seams, heel has uneven thickness, and base is concave, without pontil mark. No inscriptions. Glass has imperfections. Handmade in mould. Body has score marks and is worn down one side. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle -
Bendigo Historical Society Inc.
Clothing - MERLE HOULDEN COLLECTION: WEDDING HORSE - SHOE CHARM, 06-02-1960
Large horse-shoe covered in a tube of ruched, cream satin, trimmed on the outer edge, (and the seam of the tube) with narrow cotton lace. A 2.5cm satin ribbon loop, 60 cm long, is attached to the top of the horse-shoe with a 2.5 cm diameter, pink cotton rose. Some stitchery at the bottom left hand side of the horse -shoe would suggest that there was once , another rosebud there.costume accessories, female, wedding horse-shoe charm -
Bendigo Historical Society Inc.
Photograph - PORTRAIT, MAN, c1900
Black and white photo. Photo of gentleman with waxed moustache. Probably prior to first world war. Eyes, Tie, lapel, left arm seam of jacket , left ear, hair, eyes and right eyebrow have been detailed. Green colouring has been added to tie. Gentleman is wearing a pocket watch and handkerchief in pocket. Markings/Inscriptions: Sticker on back, Photo 3.person, individual, portrait male -
Circa Vintage Archive
Printed silk evening coat 1930s, Floral and butterflies silk princess line evening coat 1930s, Late 1930s
Evening or opera coat with princess line seams and shawl collar. Leg o' mutton sleeves, full length flared skirt of six panels and secured with one self covered button and bound buttonhole at the waist. Fully lined in cream coloured silk taffeta. Fabric is printed in gold with flowers, vines and butterflies with hand silk screened roses and forget-me-not flowers over the topNone -
Bendigo Historical Society Inc.
Clothing - BLACK SILK-SATIN DRESS W/LACE,CUFFS,COLLAR,AND BODICE, BEADING, 1930's
Clothing. Black silk-satin fabric, mid-calf length dress, gathered from the waistline. A black, pleated cummerbund encircles the waist, fastening at the left side with three metal hooks, and hand stitched loops. Long set in sleeveshave a fine piping around the arm holes, and have a hand stitched neatening to finish. Shoulder seams are also piped. A long, narrow collar of lace, bound in 2.5 cm satin edging, attaches almost to the waistline-finishing just 9 cm above the waist. A 'bib front' attached at the right side to the bodice lining, attached to the eaistline, and closing on the left hand shoulder side, with metal hooks, and hand stitched loops. Bodice closes over the top with a metal press-stud. Front bodice has three tiny pleats on each shoulder seam and gathers into the waistline seam. Fine georgette fabric, backed with fine net fabric, is with tiny glass beads, and forms the top of the 'bib front'. Fine beading of tiny beads outlines the high round neck. Larger glass beads and silky lace trim the lower 'bib front'. The lg sleeves are gathered lightly at the shoulder, which isoutlined with fine piping. Cut as a straight piece of fabric, a rectangular 'wing effect' at the wrist, is lightly gathered into a 13 cm deep lace cuff, fastening with two metal hooks, and hand-stitched eyes. Sleeves are lined with fine fabric.costume, female, black silk satin dress -
Bendigo Historical Society Inc.
Clothing - PINK SILK PYJAMAS
Clothing. Deep V neckline, front and back, has a tapered tie, at the shoulder to 4.5 cm, and slanted at the lower edge of the tie. The V neckline has a fine binding finish as do the armholes, and the lower edge of the bodice. Shadow, and pulled thread embroidery, in a floral design, outlines the V neckline in the front. A tiny 10 cm x 10 cm heart shaped pocket is bound at the edges and sits at lower right front. A small dart, 1 cm x 6 cm long is below the armholes, on each side seam. Fabric is cut on the cross to add flair. A two cm x 60 cms tie attaches at each side seam, and would tie at the back. Clothing. Pyjama pants have a V shaped waistband 11 cm deep at front and back, below which is a small 1.5 cm wide pleat on either side of front and back. An 11 cm deep plackett on both side seams - on the left hand side two x 1 cm pearl buttons and buttonholes fasten the plackett. The two buttons on the right hand side are missing. A panel of shadow embroidery decorates the outside lower edge of the trouser leg. Fabric is woven with a floral design. Lower edge of legs are finished with a fine binding. 11 cm peak at waistband. Pants with hem 88 cms, width at ankles 64 cms.Silk and Rayon Made in Chinacostume, female, pink silk pyjamas (bodice) -
Flagstaff Hill Maritime Museum and Village
Functional object - Darner, 1900 to 1930
Darning is a sewing technique for repairing holes or worn areas in fabric or knitting using needle and thread alone. It is often done by hand, but it is also possible to darn with a sewing machine. Hand darning employs the darning stitch, a simple running stitch in which the thread is "woven" in rows along the grain of the fabric, with the stitcher reversing direction at the end of each row, and then filling in the framework thus created, as if weaving. Darning is a traditional method for repairing fabric damage or holes that do not run along a seam, and where patching is impractical or would create discomfort for the wearer, such as on the heel of a sock. Darning also refers to any of several needlework techniques that are worked using darning stitches:A very common domestic vintage item used in homes, traditionally by women to repair socks or stocking the subject item dates from the first quarter of the 20th century. It along with many items of the period gives us today a snapshot into domestic life at the end of the 19th and first half of the 20th centuries.Mushroom shaped stocking and sock darner, wooden with nickel plated spring for holding stocking or other fabric in place.Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Federation University Historical Collection
Object - Candle Remnant, Candle remnant from early Two Ballarat mines, c1860 ?
From the Britannia Mine (Ballarat) Candle remnants from early Ballarat mines are quite rare..1) White/cream candle remnant. Candle mold seams are evident. Stored in green pharmaceutical tin with screw lid. (?) Found when removing for filling motor spaces Camp Street. .2) white candle remnant from the Britannia Mine at Cambrian Hill held in a 'Barker Cake Container; tin. A handwritten note inside the tin indicates 'Piece of Candle from Mullock's Britannia Mine. Ballarat. .2) Piece of Candle The Great Leviathan Quartz Mining CosMine at Cambrian Hill near Ballarat. Picked up by Donald Doyles Mather whilst cleaning out Ballarat South Goldfield Co's Leviathan Shaft when reopening "Great Leviathan in in the year 1948. The candle was last used by miners in the Great Leviathan in the drive where found Year G. Leviathan Closed down "______" mining, candle, lard, great leviathan, donald mather, cambrian hill, great leviathan quartz mining company