A blue coloured cardboard cover with black information on the front cover. Top right hand corner reads 7610-66-101-0497. Under the Australian Army insignia is the description of the manual. There are two punch holes down the left hand side of the manual.australia - armed forces - service manuals, land warfare, infantry training, m 60 machine gun 7.62

A khaki green coloured cardboard cover with black information on the front. Top right hand side reads 7610-66-107-6808. there are two punch holes down the left hand side. The booklet is covered in plastic. There is also an Army Insignia on the coveraustralia - armed forces - service manuals, land warfare, physical training

A multicoloured green/cream plastic cover with black information. Top right hand side handwritten in black texta is 67/7/118. Under this reads 7610-66-023-5721. There are two rusty metal staples down the left hand side.australia - armed forces - service manuals, signals

A blue coloured cardbaord cover with black information on the front. Top right hand corner reads DSN 7610-66-048-1126. Under the Australian Army Insignia are the details of the booklet. There are two punch holes down the left hand side of the booklet.australia - armed forces - service manuals, engineer range practices

A beige coloured cardboard cover with black information on the cover. Top righr hand side reads 7610-66-041-6374. The Australian Army Insignis is on the cover with Australian Army under it. There are two punch holes down the left hand side of the booklet.australia - armed forces - service manuals, aide-memoire, regimental officers, non-commisioned officers

A greeb coloured cover with black inforation on it. Top of the page reads Crown Copyright Reserved. Near the right hand top reads WO Code No. 9456 (Chap. 17) There are two metal staples and two punch holes down the left hand side.british armed forces - service manuals, royal engineers, bridging, pocket book, light floating bridge

A cream coloured cardbaord cover with black information on it. Top right hand side reads WO Code No 7526. There is a black and white photo of the British Empire Insignia. There are three punch holes and tow metal staples down the left hand side of the booklet.australia - armed forces - service manuals, royal engineers, pocket book, bridging

A brown coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-019-4164. Under the Australian Coat of Arms are the details of the booklet. There are two rusty metal staples down the left hand side of the booklet.australian army, the enemy

Hand-coloured photograph of a woman with glasses wearing mayoral robes and mayoral chain. She is holding a rolled piece of paper in her hands. The background is tinted in green and mauve. Mounted in gold-coloured card in a decorative gold-painted plaster and wood frame.Front: Portland/Town Council (upper centre) Councillor/M.E. Hedditch, O.B.E., J.P/ Mayor 1956-60 (lower centre, printed black and red text). Back: (no inscriptions)

A blue coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-015-3985. Under the Australian Coat of Arms insignia is the description of the booklet. There are two rusty metal staples down the left hand side.australian army, booklet, infantry training, infantry platoon weapons, m 60 machine gun 7.62

A blue coloured cardboard cover with black information on the front. Top right hand corner reads DSN 7610-66-039-4909. Under the Australian Army insignia is the description of the booket. There are two rust metal staples down the left hand side.australian army, booklet, instructors handbook, aide-memoire

A faded blue coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-024-4971. Under the Australian Coat of Arms insignia are the details of the booklet. There are two metal staples down the left hand side.infantry training, infantry platoon weapons, gun anit-tank 84mm l14a1, booklet

A light brown coloured cardboard cover with black information on the front. Handwritten top right hand corner reads 18615 2Lt .B. Dawson. There is a white label with black information near the bottom left hand corner. The booklet is covered with a plastic cover.commonwealth of australia, department of supply, stores and transport branch, furniture removal, 2lt lawrence bemsley dawson, 18615, royal australian corps of signals, 557 signal troop, 110 signal squadron, 561 signal troop

Significant to mining history of Bendigo.Black and white photograph of Nell Gwynne mine site. Image shows sheds on mine site completed, three men in front of shed left hand side; metal headframe under construction on right hand side of image. Cow grazing in foreground.Written in pencil on back of photograph in black pen: 'Nell Gwynne '5/12/34'nell gwynne gold mine, shaft

A green coloured cardboard coer with black information on the front. Top right hand corner reads 7610-66-020-3147. Under the Australian Coat of Arms insignia are the details of the booklet. There are two rusty metal staples down the left hand side.booklet, australian army, aid to the civil power

Contents: Formation of Eltham Public Hall Ladies Committee to assist general committee to raise funds for the hall, 21 September 1937 Minutes of Eltham Public Hall Ladies Committee, 21 September 1937 and 14 October 1937 Minutes Eltham Public Hall Combined Meeting, General and Ladies Committee, 6 April 1938 Annual Report, Eltham Public Hall Ladies Committee, 16 March 1939 Letter of thanks from Eltham War Service Committee to Eltham Public Hall Social Committee for donation of £16, 20 October 1939 Annual Report, Eltham Public Hall Ladies Committee, 14 March 1940 In September 1937, a group of ladies met to form a Ladies’ Committee to assist the General Committee in raising funds for a Public Hall. Those present were Mrs Allen, Mrs Bowman, Mrs Hickey, Mrs Rains, Mrs Boake and Mrs Lyon. As there were only six present, they elected to remain in the interim as a Social Committee to arrange catering, etc., for the two dances that had been arranged for September 29th and October 30th of that year. Both those dances proved a great success. Mrs McAdie joined the committee in October. The Ladies’ Committee was officially formed at a combined meeting of the General and Ladies’ committees held on April 6th, 1938. Mrs Boake agreed to be President, Mrs Lyon as Secretary and Mrs Rains as Assistant Secretary. Other members included Mrs Browne, Mrs Forde, Mrs Jarrold, Mrs Bradbury and Mrs Taylor. By 1941 their numbers had grown to include Matron Wilson, and Mesdames Andrew, Brinkkotter, Cloney, Walker, Parsons, Crick, Ballenger, Travena, Hurst, Shields and Le Brocq . A number of these ladies eventually became part of the Women’s Auxiliary of the Eltham War Memorial Trust. Councillor A. Brinkkotter, secretary of the Hall Committee, noted that Eltham had succeeded, after many long years of fighting, in erecting a new hall and civic centre which had been badly needed. “It took a long time to convince the Council of the necessity for a new hall and civic centre in Eltham.” “The councillors, in looking after the interests of all sections of the rate payers, could not see that such a move was necessary. But finally the Hall Committee proved that such a move was not only advisable, but would prove a financial asset to the Shire.” “This committee had to put down £1,500 in cash before the work on the hall began, and to enable the committee to do this, residents loaned them money free of interest for 12 months. In addition the committee has guaranteed to pay the Council £100 a year for the next ten years.” “The borrowed money has to be repaid to the lenders, and I hope that the public will realise this and support the functions which have been and will be arranged by the Hall Committee to enable them to return the money as soon, as possible.” At the opening gala for the Public Hall, Mr. G. L. Chandler, M.L.C. said “It speaks volumes for those people who have worked for many years for the hall. I know of no other place where the residents have handed over £1,500 for the erection of a hall and guaranteed the balance of the cost. You will always find the few who say ‘Time is not opportune.’ In these days you have to make your opportunities.” “Before any town can advance, a civic spirit must exist in the residents, and I hope the people will support the Hall Committee which has the interests of this district at heart.”Background workings for the funding of a Public Hall at Eltham. The funding was provided by public subscription and the money loaned to Council to build the hall. The hall was part of the new Eltham Shire offices located at the corner of Main Road and Arthur Street. A similar funding approach was used a few years later to provide for the Eltham War Memorial located on the opposite side of Main Road.7 pages (5 leafs) from exercise book, faint ruled both sides, hand written in ink approx 23 x 18 cmannual report, arthur street, e.m. dagnall, eltham public hall, eltham public hall general committee, eltham public hall ladies committee, eltham public hall social committee, eltham war service committee, main road, minutes, mrs ada lyon

All cards written by Alfred G Ferris No 2156. Refer Cat No 4183.3P for his service details..1) Letter Card, “Commonwealth of Australia”, card board, hand written in pencil, dated 3.8.1916, rear has image of Port Pirie SA. .2) Letter card, Commonwealth of Australia”, cardboard, hand written in pencil, dated 8.6.1916, rear has image of Mt Buffalo Vic. .3) Letter card, “Commonwealth of Australia”, cardboard, hand written in pencil, dated 2.5.1916, rear has image off a Troopship.All To “Mrs W Ferris Terrick Terrick via Pyramid”letter cards, ww1, military history

This poem references Mersa Matruh, a port town on the Mediterranean coast of Egypt where Tom Meagher of the 14th Battalion may have served. Mersa Matruh was the backdrop for a series of battles between the German and British forces from mid- to late-1942.This poem was written by Avis Quarrell, an active community member of the Warrnambool RSL. Avis Quarrell was a former driver during the Second World War and is well known as a photographer and author in the Warrnambool area. The poem is well provenanced, bearing a dedication from the author herself and has significant interpretive capacity to discuss the North African campaigns, experiences of war and the history of the 14th Battalion when paired with the sketch.Poem printed in black ink on marled biege coloured paper in serif font, centred on page and signed by hand. Frame comprises of black plastic and is suspended by a wire on the reverse, which is screwed in on both the left and right hand sides. Poem is sealed in frame by framing tape, brown in colour. A gold adhesive label in the lower left hand corner indicates the framer and an inscription printed on paper is adhered onto the back of the frame.Underneath poem on front: “Avis Quarrell. C 2016.” On reverse, gold adhesive label reads: “Henna Street Picture Framers/74 Henna Street, Warrnambool/Ph/Fax (03) 5561 4795/ABN 88160473014” Printed inscription on reverse reads: “Warrnambool R.S.L./Please accept this Mersa Matruh sketch and poem/from Avis Quarrell and family (Anne and Murray/ Coverdale, Stephan and Jenny Quarrell, David/ and Janet Quarrell.)/Tom Meagher was a member of the 14th Battalion/in World War 2 and gave this to my husband while/ they were in North Africa./I wrote the poem because of the poignancy it/ created in my heart./We give this on the 100 Anniversary of the/ Warrnambool Sub-Branch, 26th of April, 2016 (16 crossed out and replaced with a 17).”north africa, mersa matruh, 14th battalion, poetry, quarrell, world war two, second world war, tom meagher

Two of the dolls came home with Geoff Murray No 3411521, 3 Cav Regt Vietnam 27.11.67 to 22.10.68, Survey Corp 15.10.69 to 15.10.70. The other was bought home by Geoff Hopper No 3795341 for his sister Dorothy. Geoff served in 1st Div Aust Intelligence Unit from 12.11.69 to 29.10.70. Geoff Murray refer 638P..1 Vietnamese doll on wooden stand. Has full length hand sewn green dress and long flowing black hair. .2 Vietnamese doll on wooden stand. Has full length hand sewn black and gold dress and black hair in a single plait. .3 Vietnamese doll on wooden stand. Has full length hand sewn white and gold dress and black hair in a single plait.all items "Made in Vietnam"toys-dolls, souvenirs-vietnam

Black and white photograph of a demonstration of a dental procedure on a patient who is receiving anaesthesia. Dr Geoffrey Kaye, wearing a white gown, is holding the patient's mouth open with one hand and is holding medical equipment in the other. The anaesthetist's hands are supporting the patient's head and administering anaesthesia to the patient through an inhaler. The background of the photo has been covered with black ink so that only the anaesthetist's hands, Dr Kaye, and the patient are visible.•Printed text in black ink on paper label glued under photo: Opening Mouth without a Gag. •Handwritten with blue ink on reverse and underlined: Photo. 1.geoffrey kaye, anaesthesia, dental procedure, patient, anaesthetist

The sculptor of the Shakespeare sculpture was Andor Meszaros of Kew, Melbourne. The unveiling was undertaken by Mayor Arthur W. Nicholson. The statue was presented by L.F. North, general Manager of the Fidelity Trustee Company Limited, representing the late H.P. Stevens as one of the benefactors whose generosity enabled the Statue to be erected. The "portrait statue" shows how people saw Shakespeare as he wanted to be seen; as author-actor bowing to the applause. His position implies modesty, the knowledge of his own worth; majesty. his movement is at once humble and royal. The statue was positioned so people approaching or leaving Ballarat Civic Hall will see the statue full face, and the bowing attitude enables them to continue to study the face even from a few feet distant. The base in in the form of an Elizabethan stage, and is designed so that its sides correspond to the existing angles of its position. The proposal to erect a Statue of Shakespeare in Ballarat stemmed from a movement in 1889, when a committee was formed and a meeting held to inaugurate the proposal. At the initial meeting 258 pounds was contributed to the fund, which was later built on by further donations. In 1935 the fund stood at 945 pounds. In 1939 a bequest of 100 pounds was received from the estate of the late Frank Gale. In October 1952, the Fidelity trustee Company Limited notified of an extract of the will of Harry Person Stevens, in which be bequeathed the sum of 2,000 pounds to the fund for the erection of a Statue of William Shakespeare. In 1957 it was felt the fund had accumulated to an amount sufficient to carry out the intentions of the fund. at that stage the money in hand was approximately 4,000 pounds.A small committee was appointed to further the proposal. In May 1959 a panel of adjudicators met to determine the winner of a limited competition amongst sculptors. The committee comprised Cr G.L. Scott, Cr K.C. Webb, Cr W.E. Roff, J.H. Heinz representing the Fidelity Trustee Company Limited, and R.P. Evans of the Ballarat Fine Art Gallery. Norma Redpath, the nominee of the Victorian Sculptors' Society was present in the capacity of an adviser. Four page leaflet printed for the City of Ballarat Ceremony of handing over, accepting and unveiling the Shakespeare State at the Ballarat Civic Hall. The Shakespeare sculpture is cast in bronze and sits on a Stawell stone base. stevens, fidelity trustee company, gale, ballarat civic hall, shakespeare, north, nicholson, stawell stone, andor meszaros, sculpture

This photograph records Mr. Ian Muir, President of the Essendon Rotary Club unveiling the plaque at the opening of the Royal District Nursing Service (RDNS) Essendon Centre on the 30th of August 1967. Mrs. E.G. Wilson is President of Royal District Nursing Service (RDNS). Mrs. Wilson was a Committee member, then Vice-president, of Melbourne District Nursing Service, later called Royal District Nursing Service (RDNS) from 1959 until 1964 and President 1965-1967 Gradually over the years, Melbourne District Nursing Service, MDNS, later known as Royal District Nursing Service, RDNS, from 1966 when they received Royal patronage, opened Centres throughout the Melbourne Metropolitan area. Their Trained nurses (Sisters) left from these Centres each morning to carry out their nursing visits in a specific area, taking any sterilized equipment needed with them. They returned at the end of the day to write up their patients nursing histories, clean and reset any equipment used ready for sterilization, and contact other medical personal as necessary. Most of the RDNS cars were housed at each Centre, only a few being driven home by a Sister.Black and white photograph showing Mr.Ian Muir unveiling a plaque. Mr. Muir, on the right hand side of the photograph, has dark short hair and is wearing a dark suit. His is standing side-on facing to the left of the photograph. His right hand is holding the cord of the right hand side Australian flag which was partly covering the plaque. A gentleman, with short grey hair and wearing a dark suit, is on the far left hand side of the photograph. Between him and another Australian flag, on the left hand side of the plaque, stands Mrs. E.G, Wilson, who is wearing glasses and is dressed in a dark suit and a dark hat. The dark plaque is attached to a light coloured section of wall and in the background are the windows above the light coloured far wall of the room.Photographers Stamp. 'Quote No. GJ 73royal district nursing service, rdns, essendon centre, mrs e.g. (hazel janet) wilson, mr ian muir, rdns centre

This clear, light green, glass "hand blown" fruit preservation jar was used before the mass manufacturing of "screw topped" fruit preservation glass jars imported from Asia or great Britain. The "Mason's Patent" on the jar was for the screw-neck form of the jar top. The screw neck provided the jar with a vacuum seal (preservation) method of fruit jar storage. The reference on the jar of the actual date that the patent was established was in effect for 13 years with extension of a further 7 years. It was an American world wide patent which resulted in only specific manufacture to Glass Works that had paid the manufacturing levy imposed. The air bubbles in the glass suggests that this jar was "hand blown". This would then place the manufacture date before 1900. Preserves came in glass jars bought at the local grocery store or at a large city store on a shopping expedition. The shape of the jar changed as did the stopper used to seal it. Jars were recycled remaining the property of the manufacturer. History of Mason's.This fruit jar is significant to a rural area such as the Kiewa Valley and in the early 1900's when the preservation of fruit and vegetables was an intrinsic part of the typical rural farm/property family. Local shops could only supply fruit and vegetables as seasons permitted. The travelling "green grocer" was more prevalent in towns and cities but not in semi remote rural areas. Historical: Change of jars - shape, glass, stopper, embossing & use. Aesthetic: Display showing embossing & shape especially if in good condition.This vintage "Mason's Patent", screw on thread lid fruit jar was hand blown (air bubbles). It was produced for the home canning of local fruit. The jar is made from thick glass and is tinted light green. Clear glass jar with slight green tinge used for preserves. sides almost straight but jar has a slight bulge almost all the way to the top. Heavily embossed on 1 side. Horizontal print in large capital letters. At the top - manufacturer's name with emblem beneath it. The base has a slight bulge inwards with embossing.In a half ecliptical form "MASON'S" and underneath the Mason's logo.Under the logo "PATENT/ NOV 30 th / 1858". On the base "C201" (double molded).fruit and vegetable preserves, domestic fruit and vegetables bottling, off seasonal fruit and vegetable storage, jar, bottle, preserves, mason's preserves

The 1950's saw a revolution in small appliances for use in the average household. The hand held self heating(kerosene) iron for which this filling can was provided ,was introduced as a time saving and more convenient iron for pressing clothes and other cloth fabrics. It replaced irons needing an external fire source to heat the ironing plate. These irons continued to be in service, even when electricity was available in cities and larger rural towns. This item was used before and during the electricity supplies available from the Kiewa Hydro Electricity Scheme. These irons remained in use within regional rural areas that had limited or unreliable electrical reticulation and the ability to service them from this filling can was an essential part.n the 1950s and later the Kiewa Valley was still a relatively isolated region which was home to rural properties and small settlements. The availability of electricity and or the financial means to afford new types of electric hand irons ensured that older and sometimes less efficient ironing appliances remained for an extended period covering the 1960s to 1970s. Kerosene products, such as the kerosene self heating (KVHS 0347A) iron and this kerosene filling item, was a cheaper method for farm based domestic and other rural activities requiring a heat source. The use of kerosene as a heat/light source was able to be supplied in bulk and able to be used when floods severed vital roads into this region. The supply of electricity was in summer time subject to interruption from bush fire damaged wooden poles carrying the electrical cables. Self sufficiency by rural populations was the backbone of survival and the ability to store energy sources "on the farm" was a prerequisite of isolated regions, such as the Kiewa Valley, circa 1950s.This specially spout fitted can was provided with the Coleman self heating kerosene iron (see KVHS 0347A). On one side of the half enclosed top of the can there is a small spout(for poring the appropriate liquid into the egg shaped fount container) at the rear end of the hand iron. The can is made from tin. See KVHS 0347B- Instruction sheet; KVHS 0347C- Wrench.On one side of the can in black print on yellow background is "FUEL MEASURING CAN" underneath is "For Coleman Instant-Lite Iron" underneath are four numbered paragraphs detailing the use of this can. Below this is the name and places of manufacture. On the other side of the can is printed "BE SURE" with filling and maintenance instructionskerosene can, ironing, domestic appliances, household appliances

This mess tin belonged to MELIA JAMES HENRY : Service Number - VX18960 : Date of birth - 08 Oct 1900 : Place of birth - WARRINGTON ENGLAND : Place of enlistment - CAULFIELD VIC : Next of Kin - CHURTON MARGARET The mess tin was manufactured by Sellman & Hill (S&H) Ltd from Wolverhampton. British aluminum mess tins were used by most of the Empire early in the war. A new pattern of mess tin was developed for the Web Equipment 1937 Pattern, which was a nested, two-piece rectangular mess tin with long, folding handles. Mess tins were used to prepare or heat food but they were also used as a container from which to eat and drink. The tins were lightweight and sturdy but they became hot very quickly when heated. Mess kit consisting of two pieces: One rectangular aluminium mess tin from WWII with multiple hand-carved inscriptions on outside indicating owner and locations he was stationed in 1940 and 1941. Welded handle attachment, although handle itself is missing. There is also a small, flat bottomed aluminium cup.Multiple hand-carved inscriptions on three external sides of the mess tin: Side one: "1940 Palestine / Egypt / VX18960 / Dvr Melia. J / AASC / 1941 Libya" Side two: " BARDIA / GREECE / TOBRUK" Side three: " Gaza / Beit Jerga / Kfar Vitkin / jaff / TEL-AVIV / Jerusalem / Nazareth / Haifa" Manufacturer's hallmark stamped on side four: "S.&H. LTD / 1938" and below that a stamp of an arrow pointing upmess tin, aluminium mess tin, wwii, wwii mess tin, sellman & hill, british mess tin

The design of this pair (RN 758 & 759) is based on Thonet’s No. 18 chair, which was originally produced in 1876 by Thonet, and is still one of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. The label notes the design as “AUS MASSIV GEBOGENEM HOLZE vorm” which translates to “solid curved sandals shape”, a good description for the back of the chair. The chairs have marks, paper labels and symbols on them that show that the maker was Harnisch & Co., Neuschler (also called Banská Bystrica) Furniture Factory in Neuschol (Beszterczebanya), Hungary, privileged makers for the Imperial and Royal Austrian-Hungarian Empire 1867 – 1918. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 produced in the 1850’s, was his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. The No. 18 chair was produced in 1876, one of a group of chars with back inserts consisting of curves and loops of bentwood. These bentwood chairs are believed to be associated with the either the original Warrnambool Town Hall or the Toc H Group in Warrnambool. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Chair, bentwood, 'French Bistro Chair' with a floral pattern carved in seat. Backrest has inverted U shape inside that extends to the seat. Supports on either side of backrest's base join to back of seat. Legs have a wooded bracing ring. Marks are embossed into rim under seat. Paper label, cream with black print, on rim; Right side of label has the symbol of Heraldic Shield. Text on label. Made by NEUSOHLER FABRIK FUR MOBEL, AUS MASSIV GEBOGENEM HOLZE, vorm. HARNISCH & Co, NEUSOHL (BESZTERCaZEBANYA) UNGARN ' Hand written under seat "T H" in black paint, "T H " in white chalk.Marks; pressed into rim under seat is "3", and "Crown [over] (N)", Paper label, cream with black print, on rim; Left side has Mark “N inside circle under crown”. Right side has symbol of Heraldic Shield. Text on label “Trade – K.u.K.- Mark / NEUSOHLER FABRIK FUR MOBEL/ AUS MASSIV GEBOGENEM HOLZE, vorm. HARNISCH&Co / NEUSOHL (BESZTERCaZEBANYA) UNGARN ' Hand written under seat "T H" in black paint, "T H " in white chalk. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bentwood chair, café chair, restaurant chair, thonet design chair, neusohler fabrik fur nobel, k.u.k. approved manufacturer, hungry, harnisch & co, k.u.k., public hall chair, toc h

L to R -Mrs Woolrich, nee Kate Hand with her widowed mother Eliza Hand and an unnamed woman.Sepia photograph showing three women sitting on a bench. All dressed as if for an outing.eliza hand, kate hand, kate woolrich

Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery

Set of three colour photographs of the delivery and hand over of the Trolley Wire by the Minister of Transport Mr. Alan Brown on 26/11/1996 sent to the Editor of Trolley Wire - used in the February 1997 issue of Trolley Wire. All photos by Carolyn Dean. All photos on Kodak paper. See also Reg. Item No. 503 (Newspaper Cutting) and Item 721 for photo used on page 29 as well as these three photos used on pages 28 and 29. 1141.1 - Two reels of trolley wire on delivery truck on side of depot fan. 1141.2 - Off loading one of the reels with the Barry James Tractor Crane. 1141.3 - Photo of Alan Brown speaking with Member for Ballarat West Paul Jenkins alongside and Richard Gilbert standing some distance away. Trams 671 and 33 in the background.All have date of photo "26.11.96" along top edge and "Photo / Carolyn Dean" towards bottom right hand corner. Also various cropping marks on the photo used in publication.trolley wire, btm, overhead

This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases etc before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in 1850's - 1900's. Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020 The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases etc before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s-1900s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. Bottle, opaque brown glass, concave base, tapering slightly wider towards shoulder then inwards towards neck; ring of glass just below opening. Base is blown glass; pontil mark on base. "STUBBY 1850-1900 SMALL SIZE", ENGLISH 3 PIECE MOULD, HAND MADE TOP", "PAPER LABEL, CORK & WIRE SEAL $6flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, handmade beer bottle, handmade late 19th century bottle