Brass rectangular shaped plate with 1 hole in each corner. In raised brass letting is: “WAGON AMBULANCE VI -------- A. & A. 1914 Reg No E49592” Edging all around plate same height as letteringtransport-motor vehicles, medicine - ambulance, wagon

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Hub Nut, brass, wagon wheel hub nut, heavily encrusted, 2¾" Dia, Octagonal shaped top, threaded underneath. Artefact Reg No S/98. Recovered from the wreck of the Schomberg.warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, hub nut, brass hub nut

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Hub Nut, brass, wagon wheel hub nut, heavily encrusted, 2¾" Dia, Octagonal shaped top, threaded underneath. Artefact Reg No S/97. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, hub nut

B/W. Tracks 1 to 4 at Beech Forest, an NA-class locomotive and goods on No.1, an NQR wagon on No.4, and a station building in the right, in the early 1900s. 167mm x 280mm print.beech forest, train, wagon, railway, tracks, train station

Second black and white copySepia photograph of Harbecks Store, Esplanade, showing a team of horses, also wagon and horses in front of the store. Five men with horses, one man in doorway of feed store. Lakes Entrance VictoriaCunninhame, corner of Esplanade and Carpenter Street, 1890c - Tambo Shire collection, Country Roads.township, retail trade, transport, animals

The photograph was taken on the property owned by the Beer family, situated on Lancefield Road. When Europeans first settled the area and the property was acquired by Michael Coolaton in the 1850s, it straddled either side of the Emu Creek. After the death of Michael Coolaton in 1896 and until the Beer family purchased it in 1953, the property was leased to a number of tenants who concentrated on a variety of grazing and cereal growing pursuits. The Beer family have raised cattle and a Clydesdale stud. Today there are remains of drystone fences and some stone buildings on the property.The Clydesdale Stud raised on this property is of significance in the former Shire of Bulla.A non-digital black and white photograph with a narrow cream border of a man driving a team of three Clydesdale horses pulling a wagon loaded with hay along a pathway . A row of gum trees is in the background.beer family, lancefield road, clydesdale stud, horses, cattle, emu creek

Black and white photograph of Fred Turner and Howard Smith (Workshop Manager) at East Preston Depot late 1970's or early 1980's, standing on either side of a Ford Station Wagon.trams, tramways, east preston, personnel, tram 23

Tractor pulling a Massey Ferguson header, field bin, truck and station wagon in background, also a lady. Markings:White tape on bottom of slide reads; Wheat header working. Used as a teaching aid.Agfacoloragriculture, farm, wheat crop, tractor, header, harvester, wimmera, mouat crawford collelction

Framed black and white photograph of mounted soldiers and wagons outside The Cloth Hall at Ypres. The Cloth Hall is a large cloth hall a medieval commercial building. Erected in the 13th century at Ypres Belgium. Ruins of the Cloth Hall. Ypres.

A special plant track repair and goods recovery train proceeding to a cattle train derailment on the Balranald (NSW) line from which sheep had also escaped. The train composition was made up of J-Class steam locomtive J-502, a water gin carrying extra water for the train given doubtful supplies en-route, a wagon to reload the surviving sheep, a wagon containing track tools and equipment, a carriage for the work crew, a bogie wagon containing all the specialist tools for re-railing the train, followed lastly by the Guard's van. The specialist wagons and their equipment were based at the Bendigo Depot (see painted markings on van side) in a state of readiness for immediate use as the need arose The train is viewed approaching the Iron Bridge grade out of the Echuca rail yard. The Gatekeepers hut is visible on the right. The gatekeeper would be notified of the approaching train at which time he would open the gate to allow the train to pass through the Packenham Street level crossing.Digital TIFF file Scan of black and white print Enlargement prints on textured paper (15.5 x 20.5 cm)george coop collection, echuca, j-502, j-class steam locomotive (vulcan foundry)

A special plant track repair and goods recovery train proceeding to a cattle train derailment on the Balranald (NSW) line from which sheep had also escaped. The train composition was made up of J-Class steam locomtive J-502, a water gin carrying extra water for the train given doubtful supplies en-route, a wagon to reload the surviving sheep, a wagon containing track tools and equipment, a carriage for the work crew, a bogie wagon containing all the specialist tools for re-railing the train, followed lastly by the Guard's van. The specialist wagons and their equipment were based at the Bendigo Depot (see painted markings on van side) in a state of readiness for immediate use as the need arose The train is viewed approaching the Iron Bridge grade out of the Echuca rail yard. The Gatekeepers hut is visible on the right. The gatekeeper would be notified of the approaching train at which time he would open the gate to allow the train to pass through the Packenham Street level crossing.Digital TIFF file Scan of black and white print Enlargement prints on textured paper (15.5 x 20.5 cm)george coop collection, echuca, j-502, j-class steam locomotive (vulcan foundry)

Black and white photo of a bullock team and wagon outside Glenloth Store and Hotel c. 1900. There are 10 bullocks pulling the wagon. A man in a hat is standing beside the bullocks holding a whip. The dray is loaded with three layers of full bags and there is a bicycle on top of the bags. There are two buildings behind the bullock dray. The building on the right has a large sign reading GLENLOTH HOTEL. A typed note at the bottom the photo reads Bullock dray outside the Glenloth store c. 1900.glenloth store, glenloth hotel

Victorian Railways Workmens Sleepers This style of wagon was introduced from 1910 http://www.victorianrailways.net/service%20stock/service%20stock%20pages/w/w.htmlDigital TIFF file Scan of 120 format 6x9 [no brand identification] black and white negative transparencybendigo, bendigo railway station, george coop collection, victorian railways, w-21, wagon, workmens sleeper wagon

Photo taken in Railway Road Blackburn. The horse pulled a wagon delivering goods. Mary Pearce was the owner of the first shop in Blackburn built in 1878.Large black and white photo of Mary Pearce nee Slater taken with horse and dog. Copied on to large sheetpearce, mary, slater, william, ronald harry, harry

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 26 NQR - Open Medium Truck (11) 10/12/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 VR Service History *NQR 26.VA - 10/12/1898 NWS Built new - / /1926 - To NQ 26.VA - NQ 26.VA - 24/10/1936 NWS Into Workshops - 7/12/1936 NWS Out of Workshops (45 days) /10/1954 - Sold (to) - Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck26 NQR - narrow gauge Open Medium Truck made of Steel and metal26 NQRpuffing billy railway, pbr, rolling stock , 26 nqr - open medium truck, victorian railways, narrow gauge rolling stock, nqr wagon, 26 nqr, nqr open medium truck

Covered Wagons In Australia. Hard cover, 64 pages. Publisher; Rigby Ltd. Melbourne. ISBN;07270 0798. Inscriptions/Markings; signature of Les Blake. Bendigo Historical Society stamp inside coverLes Blakebook, transport, les blake

Postcard, WW1, Sepia image of three horse drawn wagons surounded by soldiers. Smoke billowing behind buildings at right. Two trees in centre. Location unknown G49 and GS handwritten in pencil on the reverse.postcard, postcard, ww1, france, battlefield

Black and White Photo, Large Warehouse with the title 'Jones, Miller and Co, Wholesale Potato Merchants' ESTed 1862, Staff with Horse and Wagons are pictured in the foreground of the photograph. Produce Store. Potatoes 7 Onions.buildings, commercial, jones, miller & co, jones miller & co, jones, miller, potato merchants, wholesale merchants

Printed as a programme and historical record of the town of Murchison at 150th celebrations in 1990. Cream coloured soft cover, brown printing, aboriginal camp and bullock team and wagon on front cover and a picture of crossing the river in 1860 on the back cover. 4 black and white photographs. 16 pages. Murchison 150th Anniversary 1840 -1990murchison, books, history, 150th celebrations of murchison

Weatherboard three story Wimmera Flour Mill, Taylor Street Stawell. Founded 1876. Demolished 1988 after 112 years. One photo is looking East/South the other is North/ West.B/W photograph of Stawell Flour Mill, 2 motor cars, 1 wooden wagon, 1 loaded railway carriage covered with tarp. Three photos, one is an enlarged photograph of the smaller photo.The Wimmera Flour Mill Comp Sunlight Flourstawell industry

Drivers were highly skilled enginemen. Taking a train from Beech Forest to down to Gellibrand required the train to be controlled at 10 mph (16 km) without running out of air. When a brake application was made the brakes on the locomotive were applied harder than the train brakes. The brakes locked up and the engine would just slide along. Drivers used a retention valve on the loco, then released the loco brakes so as not to wear out the brake shoes. So the train pulled into Gellibrand ready to pull out again after refilling the loco with water.At Gellibrand, a Down goods train is about to depart the station on 14 December 1955. The train consists of the locomotive G42, a louvre van NO, two NQ wagons and a guard's or brake van NC. B/W.gellibrand; colac; beech forest; railway;

B/W. An NA class engine, a number of NQR open wagons, two NUU louvre vans and a NC guard's van climb between Gellibrand and Beech Forest. A man stands near the engine.beech forest; gellibrand; railways;

Sepia photograph mounted on card showing horses with light horse saddles and equipment being loaded, somewhat reluctantly, on to a rail wagon. Thought to be 13th Light Horse possibly at Warragul station, Victoria, c1938.Ink stamp on reverse "M Lowenhardt / Warragul"military, horse, light horse, warragul, gippsland, train

Set of two prints showing the equipment used for sound testing of trams crossing a H or right angle crossing. The sound recording equipment is mounted in the back of a station wagon (Ford?). Printed on Kodak paper.on the rear in ink "Sound testing @crossing PWS circa 1977"trams, tramways, mmtb, testing, trackwork

Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district.Horses were a vital part of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of hames, joined together by a metal chain. Iron has been cased over wood to form the hames. Each has a hook attached and a ring.WARRANTED picture of bull's head FORGEDsaddlery equestrian agriculture horses hames

Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district. Horses played a vital role of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of hames, iron shaped over a wooden frame. They are linked together by a metal chain. Each has a hook attached and a metal ring at the end.WARRANTED PLOUGHMANBRAND FORGEDequestrian saddlery rural agriculture horses hames