Army green, over the shoulder, webbing spider harness, 65 pattern. For multiple carrying of additional equipment. All clips and brass fittings blackened.passchendaele barracks trust, equipment, spider harness

Part of the Leo Reoch Cohn Collection. See Catalogue No. 5527.2 for his service record.Pair of chrome plated metal and leather World War One Australian Light Horse spurs with spiked rowels. Each spur has a pair of leather straps, one with a buckle fitting passing over the top of the boot, the other fitting under the sole in front of the boot heel. Each spur is fitted with a leather butterfly. .1) Right spur and .2) Left spur.Stamped on the inside back of .1) and .2): 'M. DEWSBURY & SON, 1914'australian light horse, spurs, leo reoch cohn

Used in service by CPL Gardiner, Vietnam.Pattern 1937 Webbing Belt, Blackened with Polished Brass Fittings. Its two brass rear buckles have been removed as these were no longer required.2 BTN, 5,2064 CPL Gardiner PJW RAR.belt, webbing, vietnam.

EIG School - Ralph Birrell Collection. - Construction of Latrobe Uni. C1967. Bendigo Institute of Technology, Engineering School, Applied Science. Workmen fitting the windows.Kodakeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection. - construction of latrobe uni. c1967. bendigo institute of technology, engineering school, applied science. workmen fitting windows.

11 Leaflets produced by the Bendigo Electronic Coy Bendigo Victoria Australia, printed by Cambridge Press Bendigo with instructions in use and fitting of Scalebuoy Tap Unit.sciences, instruments - general, scalebuoy

Red and black dress belt made from webbing with brass fitting. Buckle depicts kangaroo in from of crossed rifles and the words "The Royal Australian Regiment"RAR Emblem and Manufacturer's namedress uniform, belt, clothing, royal australian regiment

A 1949 travelling iron donated by Box Hill Historical SocietyServex Trademark was registered as an Australian trademark on 2 September 1947 and later became under Phillips Industries Holdings LtdTravelling iron in green leather case with electric cord. The iron is chrome with a black bakelite handle. The cord is covered in pink cotton with black bakerlite fittings.Servex, Made in Aust, W200 cat no B11 PS54

Small metal lathe mounted on a metal stand. Driven by a 1/4 HP 1425 RPM electric motor. Comes with a box of assorted chucks and fittings.Nonetrades, metal working

Canvas strap worn by soldiers as part of equipment to attatch ammunition pouchesManufactured in 1946 by GMH for military purposesCanvas strap with centre section 280 x 85mm stitched to 450 x 25 mm lengths each end. Brass fittings each endGMH 1945 D Dmilitary, war, canvas

Hat worn by donor, Barbara Gardiner during the 1960'sBrimless, pleated, close fitting hat. Crown uncovered with a large bow at the back. Fabric patterned in lime green, deep blue and black on an orange background.costume, female headwear

Khaki ammunition pouch, medium size with sewn on shoulder strap. there is a brass webbing attachment on the top rear of the pouch. The closure fitting is a press stud lock.“41??”, Inside marking “2L & T Ltd 1943”.passchendaele barracks trust, ammunition pouch, equipment

Blackened waist webbing belt with brass clasp fittings and brass adjustment keepers. On the inside of the belt there are sewn in inserts for length adjustment and for the attachment of additional webbing."L.F. Crosswell, 5716029". There are very faint production markings.passchendaele barracks trust, webbing belt, blackened

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Gas Light Fitting. Copper, two sections of pipe joined with an ornate joiner. Badly corroded with heavy encrustation in parts and some verdigris. 1' 10" long. Recovered from the wreck of the Schomberg. Artefact Reg No S/79.warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, gas light fitting, copper gas light fitting

This set of pairs of pintles and gudgeons was recovered from the wreck of the sailing ship Schomberg and was part of its rudder steering system. A reconstruction that includes four pairs is currently on display at Flagstaff Hill. The rudder installation of the Schomberg was almost seven metres tall. A pintle and gudgeon pair is a mechanical fitting that works like a pair of door hinges. One of the uses for this type of fitting is for ships’ rudders. On a ship, one or several gudgeons would be attached to the vertical rudder stempost on the rear of the ship’s hull. On the ship's rudder, an equal number of pintles would be fitted onto it. The rudder assembly would then fit down into the gudgeons on the ship and would be connected to its steering mechanism, allowing it to be moved from side to side and steer the vessel. The SCHOMBERG- The three-masted clipper ship Schomberg was built in 1855 by Alexander Hall and Co in Aberdeen, Scotland, for James Baines' famous Black Ball line. It measured 288 feet (88 meters) in length, with a beam of 45 feet (14 meters), a depth of 29.5 feet (8.99 meters) and 2,284 tons. The mainmast was 210 feet (64 meters) high and the ship carried 3.3 acres of sail. The wooden vessel was constructed with three skins; one planked fore and aft, and two diagonally planked. All skins were fastened together with screw-threaded trunnels (wooden rails). The Schomberg was one of only three clippers wrecked in Victorian waters that operated the England-to-Australia run. It was built to outrun Donald MacKay’s two American-built ships, the Empress of the Sea and the Lightning. It was hoped that Schomberg would make Liverpool to Melbourne voyage in sixty days, setting a record for the voyage. The Schomberg sailed from Liverpool on 6 October 1855 on her maiden voyage, under the command of Captain James Forbes. Her general cargo for Australia included jewellery, spirits, machinery, and 2,000 tons of iron rails and equipment for building the Melbourne to Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn, and17,000 letters and 31,800 newspapers. She also carried a cow for fresh milk, pens for fowls and pigs, plus 90,000 gallons of water for washing and drinking on board. There were approximately 473 passengers, including migrants for Australia, and a crew of 105. Light winds encountered at the equator dashed the expectations of a record-breaking voyage. On Christmas day the ship sighted Moonlight Head in southwest Victoria and even though there was a deadly combination of wind, currents and unmarked sand spits, the vessel continued on. Then the next day, December 26th 1855, the huge ship gently ran aground on a spit that juts into Newfield Bay, east of Curdies Inlet and the present town of Peterborough. Fortunately, the coastal trader, SS Queen, was nearby and managed to save all passengers and crew. In 1975 Flagstaff Hill’s former Director Peter Ronald and the team of divers recovered many objects and artefacts from the wreck of the Schomberg such as the ship’s fittings, equipment and personal effects including a diamond hidden for years in a communion set. This set of pintles and gudgeons is an example of steering equipment used on ships over 150 years ago, equipment that is still in use in today's shipping industry as well as many other everyday hardware applications.. The equipment is significant for its association with the ill-fated vessel Schomberg, which was wrecked in the local water in 1855 on its maiden voyage. The ship was built for speed and luxury, to sail on journeys with passengers, including migrants, travelling from Liverpool to Melbourne.Pintles and gudgeons, six pairs, plus one single pintle, from the wreck of the SCHOMBERG. Cast iron horse-shoe-shaped fittings with tapered ends. each with metal bars between the long sides. One piece of each pair has a round hollow cylinder and the other has a round solid shank. The single pintle has a tall shank with a pintle hook through it. Some pieces have remnants of grey paint.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, schomberg, shipwreck, pintles, gudgeons, ship's rudder, ship's steering, clipper ship, james bain, black ball line, alexander hall and co., capt. james bully forbes, rudder pintles and gudgeons, rudder steering, pintles and braces, immigrant ship, maiden voyage, peterborough, 1855, marine technology

Brochure titled Instructions in Use and Fitting of Scalebuoy Tap Unit. Printed in blue. The front of the brochure has a diagram of a tap fitted with a Scalebuoy Unit. Inside is a detailed Method of Fitting Tap Unit to Tap, Cleaning of the Unit, which includes Method of Removal and Assembling. Also included is some information on the Scalebuoy. On the back page are pictures of a Scalebuoy hand Unit and a Scalebuoy Vest Pocket Unit.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, scalebuoy tap unit, bendigo electronic coy, frank a stevenson, cambridge press

Wooden Fishing Reels are the earliest reels ever made, with most wooden reels dating between 1800 and 1920. They were very simple reels and the design stayed basically the same for the entire period of manufacture.These reels represent a large part of common fishing history. Fishing is a significant recreational activity in the Orbost area.Four wooden fishing reels. They have brass fittings and nylon(?) line. 2443.2 has one handle missing. 2443.1 has K A scratched int the wood.2443.1 has K A scratched in the wood.fishing-reels

Part of the Kevin John Herdman No.397661 Collection. See Catalogue No. 5942P for details of his service record.Pair of khaki coloured shoulder boards, each with a Queen's Crown and RACT badge. The crown represents the rank of Major. On the back of each board are loops for fitting to an epaulette.Stamped on a loop on each board: 'SMALL 14 - 151/2'.uniform, shoulder board, major, kevin john herdman, royal australian corps of transport

Probably of US origin Can , Meat (Mess Kit), M-1910, M-1918 The older style mess kits had the flat lid that could also be used as a plate. The M-1932 (not unit in our collection) unit had the plate divided into two sections so food could be separated. The folding handle, when closed, fits into the groove formed by the divider. The ring on the plate was moved to the end of the groove so the lip of the handle fits right into it. The M-1932 Meat Can was made of "corrosion resistant" galvanized steel, not aluminium. It used the same WW I style narrow profile steel handle attached by a cast hinge.Oval aluminium mess kit with steel handle which acts as a lid lock when folded. Cover has a mounted bracket for a ring fitting for attachment to belt.Nilmess kit, m-1918, m-1910

Signals webbing satchel bag, khaki colour. Satchel has adjustable shoulder strap with brass buckles & fittings, 1 strap & buckle on the bag inself, brass.“Satchel Signals MCC 1943”containers - military, communications - signals