This cape was worn in a pre-racing season fashion parade held in October 1974 by Pearl's Boutique, a well-known fashion boutique that operated in Brighton from 1965 until 2005. Paula Folks, the store's manager at the time, recalled that this parade had been loosely red, white and blue themed in honour of Princess Anne's wedding to Mark Phillips, which took place on 14 November of that year. The parade was likely held at Tudor Court in Caulfield, a popular reception venue. Pearl's Boutique was established by Elsebe Wilhelmine Wills and Pearl Murray in 1965. The two friends had grown up together in Horsham, and decided to go into business together after reading in Fashionweek that women in their thirties, forties, fifties and older had trouble finding young-looking styles. Setting out to fill this gap in the market, they established a store at 240 St Kilda Street, near the Brighton Yacht Club, with Elsebe handled the buying while Pearl fronted the shop. They moved to 40 Church Street, Brighton in 1967. Paula Folks joined the business as a manager in 1968, became a partner in 1971 and took over from the original owners in 1988. When she closed the boutique in 2005, she donated a number of garments to Brighton Historical Society. Reflecting fondly on her 38 years at Pearls, she told The Age, "I have enjoyed all my days here because people are special to me. I love fashion. It's been a pleasure to dress people, to make them look good and feel pleased with themselves."Full-length bright pink rayon jersey cape with pink ostrich feathers around the collar.pearl's boutique, pearl's of brighton, paula folks, 1970s

not recordedA lovely example of a fine cotton nightdressFull length Scooped neckline short sleeves front bodice made in fine lace nightdresscostume, female, nightdress

Brass Bugal with no inscriptions or markings. Some dents and repaired areas. length of brass chain attached

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsTwo rope ladders, identical in format and length. The rungs are made from another type of material.

Worn from late 1800's to early 1920's.White ankle length petticoat, with beautiful lace skirt. Hand crocheted around the neck and arms.petticoats, underwear

Season 2011/12 Australian Trainers Association (ATA) Membership BadgeEnamelled Round Blue Badge with White, Red, Blue Writing attached to Length of Black CordFront: Australian Trainers Association / 2011:2012 / ATA. Back: Member / Not Transferable / 59.harness racing, trotting, membership, ata, australian trainers association, badge, 2011/2012

Season 2010/11 Australian Trainers Association (ATA) Membership BadgeEnamelled Round Blue Badge with White, Red, Blue Writing attached to Length of Orange CordFront: Australian Trainers Association / 2010:2011 / ATA. Back: Member / Not Transferable / 1195.harness racing, trotting, membership, ata, australian trainers association, badge, 2010/2011

This dress was worn by Brighton's first female mayor, Councillor Di Lopez, to a Mayoral Ball held at Brighton Technical School in 1977. Diane Margaret Lewis completed a law degree at the University of Melbourne, later marrying one of her classmates, criminal lawyer Ramon (Ray) Lopez. When she decided to run for the Brighton City Council in 1975, she was seen as an outside chance. Undeterred, she rallied a small group of friends and supporters and set out on an extensive door-knocking campaign that won voters to her side and successfully unseated former mayor Keith Devenport. She went on to serve two terms on council from 1975 to 1981. Di initiated many local projects, including the creation of a bike path along Nepean Highway and the first Brighton Festival, while balancing family life and a demanding ‘day job’ as personal assistant to Victorian Minister for Youth, Sport and Recreation Brian Dixon. She was a member of the Women’s Electoral Lobby and a champion for women’s representation, encouraging both Sally Allmand and Kate Harman to run for council (both were successfully elected). She advocated forcefully for an open, transparent local government in which ratepayers had the chance to participate and be heard. In 1976 Di became the first woman to hold the title of Mayor of Brighton, and she made it clear from the outset that she was going to do it her way. For the annual mayoral ball in 1977, ordinarily a staid traditional function, she chose a discotheque theme based on the Rod Stewart album Night on the Town, with a broad dress code of ‘black tie or jeans’: ‘You’ve got to get with the times,’ she said. ‘We want people to wear whatever they feel comfortable in.’ Di herself chose to attend in this knee-length chamois dress embellished with strings, ribbons, beads and feathers. It was both a fashion statement, exemplifying her colourful, flamboyant and forthright style, and a political one: a declaration of her intention to lead a progressive council, embracing the new and refusing to be hemmed in by dated traditions. In 2020 she was awarded an Order of Australia Medal for her service to local government and to the community of Brighton.This dress has local historical significance for its association with Brighton's first female mayor, Councillor Di Lopez, who wore it to a Mayoral Ball in 1976. The dress exemplifies her flamboyant reputation, modern outlook and willingness to break norms. At the time, the dress was a radical choice for a Mayoral Ball, where women typically wore formal evening gowns. With her choice of dress, Cr Lopez was making a public statement, breaking away from dated traditions and announcing her intention to bring the Mayor's office into the 1970s. In this way, the dress also points to the wider social and political changes taking place both in Brighton and across Australia during the mid-1970s.Three quarter length chamois dress circa 1974. Machine stitched with a v-neck and full length sleeves and an uneven raw hem, the dress is decorated with narrow thongs of chamois embellished with red beads and blue feathers. The open-fronted bodice is laced with red ribbon and the skirt is decorated with a large blue wool cross stitch and a combination of blue wool and purple ribbon cross stitch. Made in the style of an Indian 'Wild West Dress'.di lopez, chamois, brighton, brighton council, brighton technical school, mayoral ball, 1970s, feminism

Cap worn by Bob Curwen on the H.M.A.S. Warramunga Circa 1945White cap with black band,printed "Warramunga" Black headband on inner. Collar,Navy blue with 3 white bands around it. Width 30cm,Length 62cm. Lower made into 3 strips Length 44cm. Width 10cm. Issued to B. Curwen

Three layers of tulle, cut at graduating lengths, in a semi-circle shape. Attached to a ribbon covered headband and finished with a triple - layered flat Dior bow, - loops of the bow also finished in graduating lengths - each loop of the bow is in double thickness organza.costume, female, veil and headband

Pair of suede mid-length beige or fawn women's size 6 3/4 gloves with 3 stitched darts along back of hands. Gloves are joined near openings with length of white cotton. Labels and printed markings inside both gloves.Inside right hand glove : 'Made in France / 6 3/4 / (in cursive) Suedelav' Inside left hand glove : 'Leather / Made in France' '207' on paper label : 'V4/86L/ipx/39/6'costume accessories, female

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories.Three quarter length black silk dress with a pleated bodice above which is inset a panel of contrasting fabric covered with black rosettes. Given the length of the dress it may have been shortened in the years following its creation due to changing tastes.women's clothing, australian fashion - 1910s, mourning wear

The plans were used for the construction of the lifeboat ‘Warrnambool’, which began 15th September 1909 and was completed almost 12 months later 1st September 1910. It was built at the Government Dockyard in Williamstown, Victoria, along the lines designed by Great Britain’s Royal Lifeboat Institution, and included whaleback decks fore and aft, mast and centreboard, and rudder and tiller hung from the sternpost. It could be propelled by both sail and oar. At that time Captain Ferguson was Chief Harbour Master and Mr Beagley was the foreman boat builder. Mr Beagley built the lifeboat with his fellow workmen. The boat was described as “… a fine piece of workmanship and does credit to her builders and designers…” It had all the latest improvements in shape, disposition of weight and watertight compartments, and it had space for a large number of people in addition to the crew. It appears that 'H Meiers' whose signature was on the plaque that was found concealed in the hull, was involved with the building of the lifeboat. His signature and the dates of the start and finish of the boat’s construction are pencilled on the raw timber 'plaque' found in the hull in the early 1990s when the lifeboat was being restored. It is interesting that the ‘Melbourne Directory’ of 1911, published by Sands and MacDougal, lists McAuley and Meiers, boat builders, Nelson Place foreshore, between Pasco and Parker Streets, Williamstown, (Victorian Heritage Database, ‘Contextual History, Maritime Facilities’), It is quite possibly the business of the person whose name is inscribed on the lifeboat plaque. Flagstaff Hill’s documentation also mentions that the keel was laid at ‘Harry Myers, boat builders, Williamstown, Melbourne’ – the name ‘Myers’ can also be spelled ‘Meiers’, which could be the same person as the Meiers in “McAuley and Meiers” (as mentioned in genealogy lines of Myers). The new lifeboat, to be named ‘Warrnambool’ was brought to town by train and launched at the breakwater on 1st March 1911 using the Titan crane (the old lifeboat built in 1858, was then returned to Melbourne in 1911). This new lifeboat was stationed at Warrnambool in a shed located at the base of the Breakwater, adjacent to the slipway. A winch was used to bring it in and out of the water. The lifeboat ‘Warrnambool’ was similar in size to the old lifeboat but far superior in design, build and sea-going qualities such as greater manoeuvrability. The ‘self-righting, self-draining design was “practically non-capsizeable” and even if the boat overturned it would right itself to an even keel and the water would drain away. The hull was built of New Zealand Kauri, using double diagonal planking, laid in two layers at right angles, with a layer of canvas and red lead paint between the timbers to help seal the planking. It has “… plenty of freeboard area, high watertight spaces between the deck and bottom… through which pipes lead…” The backbone timbers were made of Jarrah. The lifeboat Warrnambool was one of several rescue boats used at Port Fairy and Warrnambool in the early 1900s. In late 1914 the Warrnambool lifeboat and crew were used to help find what was left of the tragic wreckage of the Antares and were able to discover the body of one of the crewmen, which they brought back to Warrnambool. Between 1951 and 1954 the lifeboat was manned under the guidance of Captain Carrington. He held lifeboat practice each month on a Sunday morning, to comply with the Ports and Harbour’s request that lifeboats be manned by a strong and competent crew, ready for action in case of emergency. In the early 1960’s it ended its service as a lifeboat and was used in Port Fairy as a barge to help dredge the Moyne River, bolted to the Port Fairy lifeboat. Flagstaff Hill obtained the Warrnambool in 1975. In 1984 it was on display at Flagstaff Hill Maritime Village, Warrnambool. On 23rd May 1990, she was lifted from the water and placed in a cradle for restoration. The name ‘WARRNAMBOOL could be seen faintly on the lifeboat before it was restored. It was during the restoration that Flagstaff Hill's boat builder discovered the 'plaque' inside the hull. A copy of the blueprint plans has the name “V.E.E. Gotch” printed on it. His advertisement in Footscray’s ‘Independent’ newspaper of Saturday 11th May 1901 states he is “Principal and Skilled member (Naval Architect) to the Court of Marine Inquiry of Victoria and holds classes for naval architectural drawing and arithmetic.” The line drawing is significant for its connection with the lifeboat WARRNAMBOOL. The lifeboat is very significant to local and state history for its use in the lifesaving rescues of seafarers, particularly in Lady Bay. It was part of the local rescue equipment. It gave a half-century of service to the local community as a lifesaving vessel, including its involvement in retrieving the body of a shipwrecked crew member of the ANTARES. Line drawing in black ink and pencil on rectangular parchment or waxed linen. Drawing has diagrams of three profiles of a vessel, with measurements and connecting pencil lines on the left quarter. The plan is for the lifeboat named “Warrnambool”, which was built in Melbourne and completed in 1910. Old blue copies of the Lifeboat plan are archived also.“LIFE BOAT / FOR / WARRNAMBOOL” “Scale, One Inch to One Foot” “ “Length as shown 30’ – 8” “ “Breadth “ “ 8’ – 6 ½ “ “ “Depth “ “ 3’ – 4 ¾” “flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lifeboat, warrnambool lifeboat, boat plans, lifeboat plans, boat construction, boat building, line drawing, plan for lifeboat, life boat, life boat 'warrnambool', clinker design, 1910 lifeboat, life saving equipment, shipbuilding

A b/w photograph of a group of 6 males identified as (L to R) Jim Reilly, Bernard Hall, Chris Hall, Ted Carmichael, Ken Morgan, Barry Rowe - the Wood Chop Final Winners - with their trophies - the George Hall Memorial Trophy.Handwritten on back: -REGIONAL - NEEDED AT 6% OFFICE TUESDAY (obviosly details for the photographer specifying the length of the finished photo required. <------36.9 lns----> 79%reilly, jim, hall, bernard, chris, carmichael, ted, morgan, ken, rowe, barry, george hall memorial trophy, wood chopping, sports, b., george evans collection

Childhood garments worn by Giselda Bannister.Example of 1960's infant wear.Infant's cotton size 1 singlet suitable for 12 Kg baby.Embassy size 1, weight 12 kg, length 84 cm; Washing instructions: Hot machine wash, Spin dry, hot iron.

Two of the dolls came home with Geoff Murray No 3411521, 3 Cav Regt Vietnam 27.11.67 to 22.10.68, Survey Corp 15.10.69 to 15.10.70. The other was bought home by Geoff Hopper No 3795341 for his sister Dorothy. Geoff served in 1st Div Aust Intelligence Unit from 12.11.69 to 29.10.70. Geoff Murray refer 638P..1 Vietnamese doll on wooden stand. Has full length hand sewn green dress and long flowing black hair. .2 Vietnamese doll on wooden stand. Has full length hand sewn black and gold dress and black hair in a single plait. .3 Vietnamese doll on wooden stand. Has full length hand sewn white and gold dress and black hair in a single plait.all items "Made in Vietnam"toys-dolls, souvenirs-vietnam

The double bevel gauge is used as a drawing tool, to measure, set angles and transfer angles. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.This double bevel gauge has three lengths of flat brass that swivel at the joints. The long piece has curved ends and indented arcs, one on each side, along the length. The short pieces have diagonal ends. The centre length has a hole through the middle. The short pieces have a screw with its head above the flat brass. The tool has an inscription. It once belonged to shipwright Laurie Dinks.Bevel marked "L DILKS" "G. M."flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, bevel, drawing tool, measuring tool, laurie dilks, l dilks, port and harbours melbourne

Black & white photograph of a bride. She is wearing a long, white dress with a lace panel starting at about knee length. The bodice is lace and the dress has elbow length sleeves. She has elbow length gloves with a bracelet on her right arm. She has a long veil with embroidery at the lower edge. Her bouquet with it's large white bow is on a pedestal in front of her. Photo is mounted on white cardboard.The Muntz Studio, Puckle St., Moonee Pondsphoto, individual, wedding, foster & wilson collection, photograph

THE SKIRT The skirt has a gentle, soft, feminine design which keeps it in good shape and condition, preserving it from soiling and prolonging its life: - the satin fabric is softly pleated at the waist and falls gently to almost floor length - the opening is concealed at the back within one of the folds and closes with hooks and eyes underneath the bow at the back of the jacket - the horizontal stitching at the base of the skirt joins the lining to the skirt, and the firmness it creates allows it to gently flare out at the base without the need of hooped petticoats - a removable fabric lining at the hem protects the front and back of the skirt from friction and soiling from the wearer’s footwear THE SKIRT This evening outfit is significant for its connection with colonial Australia, Victoria and Warrnambool. It is a fine example of female fashion of the mid to late 1900s. The outfit is significant for its connection with a wedding uniting two colonial families from Northern Ireland who immigrated to Australia in the mid-1850s. The families had a significant role in the history of Warrnambool and district. The outfit is significant too for connecting the colonial families to the indigenous culture of the district and the contact between the native and European people. The lined, floor-length, amber satin skirt has gentle folds that gather into a fitted waistband. One of the folds at the back conceals the opening of the skirt that fastens using metal hooks and eyes. The bow at the back of the jacket covers the top of the closure. There are metal hooks distributed around the top of the waistband. The skirt is stitched horizontally around the hem in several rows. There is a removable fabric lining at the base of the skirt.evening skirt, ladies 1h century skirt, satin skirt, antique satin skirt

Set of 14 tram car templates contained within Reg Item 356, cut from card board to indicate the over all dimensions of the various type of tramcars. Would have been used in the drawing office for checking clearances on buildings, trackwork, junctions. Cut with holes in the centre to enable this to be done. Scale 1/2" = 1 foot. .1 - Marked "A" - for a combination car - 30' 11.25" long, 7'6" wheelbase .2 - "B" - for a combination car - 32' long, 6'6" wheel base to drawing R489 and summer or straight sill car to drawing R820. .3 - "C" - Straight Sill combination car - 33' long, 7'6" wheelbase. .4 - "D" - Combination car, length 31'11", 7'6" wheelbase .5 - "E" - Combination car, length 35', 7' wheelbase .6 - "F" - DC Bogie car, to Drawing 112, length - 44' 3.5", truck centres 22 '4" .7 - "G" - ditto length 44' 5.5", truck centres 23' 7.5" .8 - "H" - ditto length 44' 5.5", truck centres 24' 7.5" .9 - "J" - four motor bogie, to drawing 854, length 45' 6", truck centres 24'6" .10 - "K" - Combination car, length 35', 12' Radiax truck. .11 - Bogie tramcar, W class length 48', truck centres 26' 6" .12 - ditto, W2 534, length 48', truck centres 26' 0" .13 - W4 class tram, .14 - W5 730, length 46' 6', truck centres 28'trams, tramways, mmtb, plans, drawings, templates

This linesman belt was used under the 1947 Electricity Regulations and before tighter Occupation and Health regulations (late 1990's early 2000's) were introduced that mechanical lifting platforms(wherever possible) replaced the belt up the pole method.The safety concern was that it required that tools needed by the linesman had to be placed in a large canvas bag and attached to the belt (extra weight) then the linesman had to climb the ladder. Ladders had to be at the correct angle and not able to "slip" from their initial footings. A full harness and a secondary fall belt is now mandatory for pole linesmen. The safety of fellow workers could be compromised if they were required to assist or recover the first linesman if needed. In 2006 an additional 269 registered lineworkers were employed. Please note that the terminology of linesman has become unisex. The linesman's belt enabled the linesman to place his feet against the pole adjust the belt (if needed) and lean back securely allowing both hands to be free to work with. This linesman belt is very significant to the Kiewa Valley due to the numerous poles and high voltage overhead power structures that needed maintenance for the extensive "mushroom" installation of electrical power polls(wood and metal). On high poles (steel) climbing pegs were welded on, however in the Alpine areas snow in winter caused an OH&S problem which were hard to overcome. The safety of a linesman when maintenance of electricity line on poles can be highlighted by the New Zealand linesman who survived an 11,000 volt shock when carrying out maintenance. For the record 11,000 volts is four times more powerful than execution by "the electric chair". The maintenance of the linesman's belt was his responsibility (keeping it clean and in "good" condition). Labour laws change this initial responsibility, from the linesman, to the employer. Climbing pegs were installed on higher poles that extended beyond the reach of ladders.This thick leather linesman belt is made from two lengths of heavy lengths of leather straps sewn together to make up 80% of the belt. The remaining 20% is "the belt tonge" which has eleven holes for three (solid steel tang) buckle connections.kiewa hydro electricity scheme, victorian state electricity commission, relays, generators, electrical pole maintenance

Huttley Martin FamilyB/W Portrait: Bride wearing a Jeweled Crux Gammata ( Gammadion Cross), Tasselled lace over white floor length dress & veil, wears elbow length gloves. Groom white shirt and Light coloured tine, dark suit, holding gloves. Gainsborough 215 Chapel Street Prahan On reverse Harry Martin m alice Henderson (my Uncle) MADGE HUTTLEY'S UNCLEhuttley, martin

The portrait was commissioned in 1884, near the end of Stawell's term of office. The portrait was commissioned at the same time as those of Redmond Barry and Justice Molesworth. The total cost of all three paintings was 1200 pounds. Sir William Stawell arrived in Victoria in 1842; he quickly established a reputation for himself at the Bar. After the separation of the Port Phillip colony from New South Wales, Sir William served as the attorney general in the first representative government and was the leading prosecutor in the Eureka trials. Sir William was appointed as Chief Justice of the Supreme Court in 1857, serving 29 years in the post. In addition the township of Stawell was named after the recently appointed Chief Justice in 1858. The portrait is of historical significance as a portrait of Sir William Stawell.Full length portrait in oils of Sir William Stawell. Stawell is seated and dressed in his judicial robes. Signed and dated 1887 lower right hand corner of the painting. Plaque identifying subject. The Hon. Sir W.F. Stawell.K.C.M.C Chief Justice of the Supreme Court 1857-1886judges, william stawell

First life member of the Bendigo RSL. Dr Harold R. Catford, refer Cat No. 8048.Photograph- black and white full length portrait photograph of DR. H.R. Catford. Name in black print.Handwritten on mount below photograph in black ink, "Late Dr. H.R. Catford/ Foundation President."framed item, photograph, portrait, rsl

A carrick mat is a decorative-type of knot with the ends connected together, forming an endless knot. The basic carrick mat made with two passes of rope also forms the central motif in the logo of the International Guild of Knot Tyers.The carrick mat was a much used improvised mat used by many seafarers, especially in the days of sail, as a protective or cushioning pad.Is a flat woven decorative knot of coarse hemp rope. There appear to be two to three lengths of rope in the construction. knots, carrick mat, carrick bend knot

Germany was governed by the Nazi party during WW2 /1939 to 1945. Fighting a war on many fronts bought about Germanys down fall. The German Navy was a very modern Navy and her Uboat fleet was very active in controlling the seas during the early years of the War and very large Battleships including the Bismark.Short lengthed dagger ,double edged and etched blade with orange swirlled handle and eagle on the tip of handle.Eagle creast with Nazi insignia in the clawers of the eagle/Anchor inbedded in the hilt/WKC and knights helmet stamped on the hilt end of the blade/blade etching contains sailing ship/anchor and floral decoration.ww2, nazi, germany, naval, dagger

Dark blue silk hatband with gold embroidered School crest and green and gold stripe along the length.SInt Lucernae Ardentes

A Large Rare mid 19th Century Balance Scale (also called a Beam Scale) Made in England by W&T Avery a British manufacturer of weighing machines. The company was founded in the early 18th century and took the name W & T Avery in 1818. The undocumented origin of the company goes back to 1730 when James Ford established the business in the town of Digbeth. On Joseph Balden the then company’s owner’s death in 1813 William and Thomas Avery took over his scale making business and in 1818 renamed it W & T Avery. The business rapidly expanded and in 1885 they owned three factories: the Atlas Works in West Bromwich, the Mill Lane Works in Birmingham and the Moat Lane Works in Digbeth. In 1891 the business became a limited company with a board of directors and in 1894 the shares were quoted on the London Stock Exchange. In 1895 the company bought the legendary Soho Foundry in Smethwick, a former steam engine factory owned by James Watt & Co. In 1897 the move was complete and the steam engine business was gradually converted to pure manufacture of weighing machines. The turn of the century was marked by managing director William Hipkins who was determined to broadening the renown of the Avery brand and transforming the business into a specialist manufacture of weighing machines. By 1914 the company occupied an area of 32,000m² and had some 3000 employees. In the inter-war period the growth continued with the addition of specialized shops for cast parts, enamel paints and weighbridge assembly and the product range diversified into counting machines, testing machines, automatic packing machines and petrol pumps. During the second world war the company also produced various types of heavy guns. At that time the site underwent severe damage from parachute mines and incendiary bombs.Then from 1931 to 1973 the company occupied the 18th-century Middlesex Sessions House in Clerkenwell as its headquarters. Changes in weighing machine technology after World War II led to the closure of the foundry, the introduction of electronic weighing with the simultaneous gradual disappearance of purely mechanical devices. The continued expansion was partly achieved through a series of acquisitions of other companies. After almost a century of national and international expansion the company was taken over by GEC in 1979. Keith Hodgkinson, managing director at the time, completed the turn-around from mechanical to electronic weighing with a complete overhaul of the product range of retail scales and industrial platform scales. In 1993 GEC took over the Dutch-based company Berkel and the Avery-Berkel name was introduced. In 2000 the business was in turn acquired by the US-American company Weigh-Tronix, who already owned Salter, and is today operating as Avery Weigh-Tronix. Item made and used possibly around the 1850s by Victorian colonial government to check weights of goods being sold by early shop keepers on the gold fields item is very rare.James McEwan & Co were the retailers of W & T Avery scales in Victoria from 1852. A very rare item used probably to check weights used by merchants during colonial times by government inspectors in Victoria. A similar example exist in a NSW museum, the item is believed to have been made before W & T Avery expansion to the Soho foundry in Birmingham in 1885 and after 1818.Beam balance scale suspended from a wooden tripod, with metal trays suspended by three chain lengths. embossed on the balance beam W T Avery, Birmingham,flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, scale, avery

Set of pruning loppers with wooden handles. Blades are bypass cutting. Handles are well worn Length 23¼"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Single crease iron 2⅛" Flat head burred and split. Maker Rabone & Son Length 140mm flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village