Showing 63318 items
matching 2/2/1899
-
Kiewa Valley Historical Society
Bottle Milk, circa mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle -
Kiewa Valley Historical Society
Bottle Ginger Beer, circa mid to late 1900's
This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Australian Glass Manufacturers and the Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State.In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (PHIBBS Bros) and where it originated from. These bottles were recycled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle.This heavy gauged glass bottle (Ginger Beer) has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the production line. The method of pouring ginger beer into the bottle has been part of the "production line" process of automation. This bottle has a capacity to hold 250ml of ginger beer and is made from "clear" glass. The marority of ginger beer bottles produced in this time frame where made with a "green" tint in them.This tinting helped reduce the sunlight effecting the contentsAround the bottom side of the bottle and blown into the glass is "THIS BOTTLE IS THE PROPERTY OF PHIBBS BROS, ALBURY" above this, in "running script" and sloping up from left to right is "Phibbs Bros" and underneath parallel to it "ALBURY". On the base of the bottle is molded a big "L 289" underneath this "M" and below this "AGM".ginger beer bottle, soft drink bottles, cordial bottles -
Bendigo Military Museum
Map - MAP, PORT MORESBY 1943, 2/1st Aust Army TOPO SVY Coy, March 1943
In the collection re Capt R.A. Hanson VX111070, refer cat No 5646.3P for his service details.Map, Port Moresby area, colour, detailed, scale 1" - 1 mile, first Edition.In red, "1:63360 Standard series New Guinea, Port Moresby"map, new guinea, port moresby -
Bendigo Military Museum
Postcard - POSTCARDS, ENGLISH, 2381.1 & .2 Bournville Post Card et al, c.1917
Written 1917 from FRANK BARNES (4156) to UNA FRANKLING of Harcourt. Refer Cat No 2380 for details re Frank Barnes.Series of eight rectangular coloured postcards with images of United Kingdom.handwriting on rear.documents - photographs, military history, photographs, postcards -
Tramways/East Melbourne RSL Sub Branch - RSL Victoria Listing id: 27511
Book, R.P.Serle et al, BOTH SIDES OF THE HILL (WW11), 1985
isbn: 0 9589634 0 1 -
Bendigo Military Museum
Newspaper - NEWSPAPER- The Weekend Australia, The Australians killed in action in World War II
“THE AUSTRALIANS KILLED IN ACTION IN WORLD WAR II - WHILE SERVING WITH THE NATION’S DEFENCE FORCE “ The commencement and cut off dates/ approved for the Roll of Honour were September 3, 1939 and June 30, 1947Newspaper- copy of newspaper on white paper.All pages with plastic laminate. Black and white print and photograph. Pages 9 - 21. Pages secured with 4 metal split rings,newspaper, history, ww2 -
Bendigo Military Museum
Book - BOOK, POETRY, Australian Print Group, The Happy Warrior, 2001
An anthology of Australian & New Zealand Military poetry. Soft cardboard cover with front & back fold in flaps. White / gold / yellow print on front, spine & back. Cover illustration in glossy colour of a portion of a painting of military personnel. Small overlay of rosemary & wattle flowers at bottom front. 524 pages, cut, plain, white, illustrated, black / white / colour photographs.books- military history, poetry, military poetry -
Bendigo Military Museum
Postcard - POSTCARDS, PHOTOGRAPHIC WW1, c.1914-1918
Postcards from Charlie on active service to Lila (C) Rogan, Casey Street, Maryborough, dated 18.8.16 to 22.9.18. All postcards printed with verse or humorous messages..6) Handwriting on rear: “When the boys come home”.military history, communication - postal, passchendaele barracks trust, postcards -
Greensborough Historical Society
DVD, 2 Road Films, Homefront: a new kind of war memorial, 2019_
Description of the people, stories and signiificance behind the new sculptures in Greensborough War Memorial Park, including chainsaw artists Hikaru Kodama, Leigh Conkie and John Brady and blacksmith Roland Dannenhauer. Director: Michael Wilkins, Producer/Designer: Amanda Gibson.Colour DVD; with Councillors notes at special documentary screening, publicity leaflet and ticket for screening held 15 May 2019greensborough park, war memorials victoria, homefront project -
Whitehorse Historical Society Inc.
Article, Sparks Reserve, Nov/Dec 2021
An article about Sparks Reserve Retarding Basin and Laburnum Primary School ovalnon-fictionAn article about Sparks Reserve Retarding Basin and Laburnum Primary School ovalsparks reserve, retarding basin, laburnum primary school no 4863, fitzmaurice yvonne, baker gwennyth -
National Vietnam Veterans Museum (NVVM)
Booklet, VC/NVA Mine Indicators, 1967
Standard issue item as used by Australian servicemen during the conflict in Vietnam.Discoloured small booklet written in English and Vietnamese. Black writing with diagrams. Front cover top left has an image of a shield with a sword in the centre. At the bottom right is a star wings on Anchor, US military issue. Booklet describes signs used to indicate mines in areas.mine clearing, us military command, fielding marcus -
Alfred Hospital Nurses League - Nursing Archive
Literary work - Poem, December 1983
Two pages typed poemfiction -
Clunes Museum
Book, CHARLES H. KELLY 2 CASTLE ST CITY ROAD EC AND 66 PATERNOSTER ROW EC, DANIEL QUORM AND HIS RELIGIOUS NOTIONS, 1891
RED HARD COVERED BOOK - DANIEL QUORM AND HIS RELIGIOUS NOTIONS. BY MARK GUY PEARSE. BELONGING TO E.M. OATES. CLUNES.local history, book, religion, books -
Whitehorse Historical Society Inc.
Postcard, Historic Postcard - Set 2 no 2 - Sign - Mitcham
Black and white historic postcard (Set 2 No 2 ) Sign on Whitehorse Road, Mitcham in the 1940s advertising Mitcham. Photo supplied by Nunawading Historical Society - 2 copies.signs, whitehorse road, mitcham, nunawading historical society, nunawading library & information service -
Whitehorse Historical Society Inc.
Photograph - 3Three coloured photographs, WHS General Meeting 2/2/2019
WHS General Meeting 2/2/2019. Speakers Roselie Whalen and Bob Gardiner on bushfires.whs meeting 2/2/2019, roselie whalen, bob gardiner -
Department of Health and Human Services
Photograph, Medical staff and Australian contingent touring the Hospital wards - Dr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital - Photo is from Dr John Forbes photo albums - 1971
Dr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital Indonesia CollectionDr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital Indonesia Collection -
Department of Health and Human Services
Photograph, Medical staff and Australian contingent touring the Hospital wards - Dr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital - Photo is from Dr John Forbes photo albums - 1971
Dr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital Indonesia CollectionDr John A Forbes Fairfield / Gull Force 2/21 Bn AIF / Ziarah Caltex & Rumah Sakit Ambon Hospital Indonesia Collection -
Kew Historical Society Inc
Photograph, No.2 [Steam] Roller, Kew City Council, c.1950
The Number 2 Steamroller was used in public road building in Kew.It replaced the first Council steamroller which was used between 1915 and 1932.Rare photograph of a Kew City Council piece of road making machinerySmall black and white photograph of a steamroller used by the City of Kew in road construction from the 1930s to the 1950s.Reverse of photo: "KCC No 2 Roller 607S". Accompanying note: "20/3/84 Gift to the Society from Mr [?] who was K.C.C. [Kew City Council] driver of this "monster". Kew City Council No.2 Roller. Used in street construction 1950. Roller probably 1930 era."road construction - kew (vic), no.2 steamroller, steamrollers - kew (vic) -
Friends of Ballarat Botanical Gardens History Group
Work on paper - Ballarat Botanic Gardens - Gordon Cottage, Minutes, Ordinary Meeting of Council 20/2/1989, 20/2/1989
5 points are made about Adam Lindsay Gordon Cottage concerning the 'reservation of land, responsibility for the Cottage, restoration of the Cottage and notification of Council approval.This document is proof of Council's approval for the responsibility and restoration of the Adam Lindsay Gordon Cottage in 1989.1 page of typingDate 20/2/1989 stamped righthand top corner. 2 sections 1.4 and 1.6 crossed out diagonally. "Delegation and an illegible word written above item 1.5.john garner, doctor, john garner collection, friends of ballarat botanical gardens, adam lindsay gordon cottage, ymca, y's men's club, gordon cottage committee, australian poet, restoration of the adam lindsay gordon cottage, ballarat city council., ballarat botanical gardens, gardens, ballarat -
Ringwood and District Historical Society
Leaflet, City of Ringwood, Ringwood News pamphlet 2 Feb 1991, 2-Feb-91
Issued to inform residents of the district and changes in the area. Subjects include the Ringwood Festival Programmeand the proposed Ringwood District centre.Pamphlet 'Ringwood News' issued to inform residents of the district and changes in the area. Subjects include the Ringwood Festival Programme and the proposed Ringwood District centre.; Issue No. 2 dated 2-Feb-1991 pp. 8.City of Ringwood News -
Bacchus Marsh & District Historical Society
Certificate, Australasian Federal Referendum July 1899
William Grant Junior was President of the Shire of Bacchus Marsh in 1901 when the Australian Colonies federated to become a federal nation state. Grant was a member of a prominent local family and was active in public affairs throughout his life. The federation of the Australian Colonies was a turning point in Australian history and as such its achievement was celebrated in a range of ways. A major step towards achieving Federation was the referendum of July 1899 which saw five of the six Australian colonies vote in favor of Federation, with Western Australia later voting in favor in 1900.Printed poster sized document certifying that William Grant of Bacchus Marsh voted in a referendum of Victorian electors on 27th the July 1899 on the question of an Australian Federal Constitution. The body of the certificate text is surrounded on three sides by captioned photographic portraits of the Premiers of the six Australian Colonies. A British coat of arms is at the top of the certificate and at the bottom is an image of Parliament House in Melbourne, which includes a Dome, which was a projected feature of the building which was never actually added to the Victorian Parliament building.Across the top of the certificate: 'Australasian Federal Referendum July 1899'. In the centre: 'This is to certify that the question of an Australian Federal Constitution was submitted to the Electors of Victoria on the 27th day of July 1899 and that out of a Poll of 103,783 votes 152,653 were cast in favor of such Australasian Federal Constitution and further that William Grant, voted at the said election'. Signed, [George Turner], Premier. At bottom: 'Robt. S. Brian, Government Printer, Melbourne'.william grant 1850-1924, federation (1901), referendums, illuminated certificates -
Warrnambool RSL Sub Branch
Work on paper - 2/2 Battalion Aitape Wewak Campaign, 2/2 Battalion Aitape Wewak Campaign Jan-Aug 1945
Framed print-out of the adjacent map's storyDetails the story of the 2/2 Battalion in the Aitape Wewak campaign, and the story of its connection with the present owners -
Kew Historical Society Inc
Photograph, 2 Daracombe Ave, Kew, 1950s
Photograph of a garden in KewA colour photograph, dating from the 1950s of the garden of 2 Daracombe Avenue, Kew. This view of the garden of the Beck family house was donated by Anita Beck at the time of the historic garden exhibition at the Kew Court House in 2016. The Beck family occupied the house from the 1950s to 2009. Inscription to reverse: "2 Daracombe Ave 1950s to 2009 / Beck family".daracombe avenue (kew), gardens -- kew -
Vision Australia
Functional object - Object, Liquid level sensor: 2 level
This two level Liquid Level Sensor is an aid which prevents cups from being overfilled with 2 levels of liquid. The unit simply hangs over the side of a cup or glass with the probes on the inside. Ideal for making a cup of tea or coffee with milk. Simply pour in the hot water stopping when a pulsating tone is heard then pour in milk stopping when a continuous tone is heard. Can also be used as a single level sensor such as for non mixed drinks. Handy magnets on the back of the unit allow for easy storage on fridge or other metal object. Uses a 12V battery. 1 black liquid sensor with 2 magnets assistive devices, equipment -
Bendigo Military Museum
Pamphlet - PAMPHLETS IRAQ, ADF School of Languages, 1 Iraq Handbook including Al Muthanna Appendix .2 Arabic At Your Command, 1 April 2005
Items issued to W O 1 Greg Westhead, refer Cat No 1496.7 for his service details..1 White plastic/cardboard cover, black printing, army/navy/air force emblem in yellow, red and blue on front cover. Spiral binding. Military police in Iraq. .2 Cardboard cover, buff green colour, black printing with emblem, black linen binding. .1)& .2) “317595 WOI G. Westhead/RACMP/AMTG-1”documents-pamphlets-education, iraq -
Federation University Historical Collection
Document - Document - Information, VIOSH: Background Paper for Stakeholders Workshop, Friday 2 June 1994
Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The Background Paper prepared for a meeting to be held on Friday 2 May 1994. It is a Stakeholders Workshop. Information on VIOSH over the years provided. The range of OHS activities include: 1. Accredited Tertiary Courses 2. Short Courses 3. Research 4. Consultancy 5. Advisory Function 6. Information Resources The Graduate Diploma in OHM started in 1979 and was the first Occupational Health and Safety tertiary course in Australia. Since then it has continued to attract students at a national level even though similar courses were offered elsewhere. The map on Page 2 shows the extent of enrolments. The Courses Review Process is outlined and VIOSH is now able to define its own procedures and processes for reviewing its post-graduate programs.This is being managed by a small internal project management team. The "new" programs to commence in 1996.Four A4 pages, typed. Page 2 -map of Australiaviosh, victorian institute of occupational safety and health, ballarat college of advanced education, graduate diploma in ohm, stakeholders workshop, accredited tertiary courses, short courses, research, consultancy, advisory function, information resources, course review process -
National Wool Museum
Architectural Plan, Wool Warehouse, Moorabool St, Geelong for Messrs C.J. Dennys & Co., Basement Plan No. 2
Original Jacob Pitman architectural plan of the Dennys Lascelles bluestone woolstore dated 1 March 1871 mounted in a wood frame under glass. Titled "Wool Warehouse, Moorabool St, Geelong for Messrs C.J. Dennys & Co., Basement Plan No. 2."Wool Warehouse, Moorabool St, Geelong for Messrs C.J. Dennys & Co., Basement Plan No. 2wool stores, pitman, mr jacob, dennys lascelles wool store