J Mainland was a jeweller and watchmaker at 166 Timor Street, Warrnambool opposite the old Post Office. The business was operating from the late 19th century to at least the mid 1920s. He also sold prescription spectacles.This is an important label as one of the few remaining from the business of J Mainland.White paper rectangular label with green text and lines. It is adhered to a piece of pink card.J MAINLAND & CO., WARRNAMBOOL. Practical Watchmakers, Opticians and Manufacturing Jewellers.j mainland, warrnambool, watchmaker, jeweller

This photo shows a river boat under construction on the eastern bank of the Murray river in the Echuca Port area where the boat shed and swimming pool were located in the 1970's. The boat shed can be seen through the trees but the swimming pool isn't visible. There is another river boat behind, possibly the Canberra.This photograph is of historical and social significance in that it shows the condition of the Murray river in the 1970's at an area used as the local swimming area on the Echuca side of the river. There is a river boat under construction (the frame work shows a bottom and top storey on the boat). This could be the Pride of the Murray. It is difficult to see the name on the river boat behind but it looks like the Canberra. Three houseboats are moored together, a bit further down the river.Colour photograph (post card size) of the Murray river looking north towards the boat shed building. Two river boats are moored by the left bank close to the swimming pool and three house boats can be seen moored further down the river. The river boat in the fore ground is under construction.Printed on reverse:" this paper manufactured by Kodak". Written in blue pen"12B"echuca, port of (riverboats), echuca, port of

Brass coloured metal container with silver lid Lid has oval shaped indentationFoot Powder D^D Manufactured by the J.R. Watkins co. Melbourne

Item belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No1959 for his service record.This device was mounted outside of aircraft, in air stream, generating a vacuum. L = 27 cm. Air tube and coupling at base. Manufactures plaque states "Type B-4 plus misc numbers."venturi, equipment aircraft

Three colour photographs showing the parade at the Eltham Festival along Main Road, Nov 1976Manufacturing print code indicates prints were processed Aug 1977.eltham, main road, festivals, parade

Three colour photographs showing the parade at the Eltham Festival along Main Road, Nov 1976Manufacturing print code indicates prints were processed Aug 1977.eltham, main road, festivals, parade

Three colour photographs showing the parade at the Eltham Festival along Main Road, Nov 1976Manufacturing print code indicates prints were processed Aug 1977.eltham, main road, festivals, parade

Donated Ansett Hostess / Stewardess orange bowler hat with turned brim, made & worn 1972 - 1977Ansett Hostess hat, bowler-style with turned brim. Tangerine-orange poly-cotton with 2cm wide black grosgrain ribbon trim on hat body and on edge of brim. 8cm wide bow on both trims at rear of hat. Crown is 12cm high measured from lower edge, 4cm turned brim. Hat size 19&1/2 inch circumference. Hat-elastic secured to sweat-band.White label with black print indicating manufacture by Nivek Headwear Reg.Melb. ansett australia, hostess / stewardess, bowler hat, turned brim, tangerine orange, 1970s

5 Glass Bottles are Brown Colored the other two aqua and one lime green. 1 Has a long crack down the side but not deep enough to cause a problem.M.B C.V Bottle Co. of Victoria Pty. PTD The Property of the Manufactures

Green & yellow cardboard box with contents of Coral 100% Rice Starch, instructions for use on back.Coral Manufacturing Pty Ltd Box 1572 GPO Sydney NSWdomestic equipment, laundering, starch

Black enamel top cover with circular dome. Mantle with glass cover 8cm: adjustable fuel knob. Protective guard with carrying handle attached - silver coated steel. Silver coated domed base with primer knob. mantle fragile & damaged.Tilley 'Pyrex' 171. Made in UK. Manufactured in United Kingdom '570XA'

Small Temple Bar Tobacco tin containing 8 keys, tin with blue, red & gold lettering, Temple Bar Sweet Slice Tobacco, sticker on bottom showing a woman with baby reads You Love Them Fight For Them Join The A.I.F now.Manufactured by the British American Tobacco Co Pty Ltd Melbourne Australiapersonal effects, smoking accessories, toabcco tin

Round wooden barrel with metal and wood handle for turning barrel, which also had brass fittings All placed on a cast iron base."Snye & Co Manufacturing London" written on a brass plaque, on front of the barrel.knife cleaners

Slicer for food, probably cheese, wooden and rectangle with metal blade and handle. Arcadia Manufacturing Co Newark New York Patent 1885-1891shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, warrnambool, shipwrecked artifact, slicer, food slicer, cheese, arcidia, newark

Charles Platt was born in New York in 1861 and died in 1933. He studied art at the National Academy of Design. In 1880, Charles went to Paris to study landscape painting and, while there, he travelled to Italy with his brother. Though he was influenced by Italian detailing, his designs were not copies of Italian gardens He was known as an architect and illustrator not as a garden designer. In 1880, he trained as an etcher with Stephen Parrish in Gloucester, Massachusetts. He also trained at the National Academy of Design and the Art Students League in New York and later in Paris with Gustave Boulanger and Jules Joseph Lefebvre at the Académie Julian. Charles exhibited his paintings and etchings and gained his first audience in Paris Salon of 1885. Betweem 1880 – 1890 , he made hundreds of etchings of architecture and landscapes. In 1900, Charles received a bronze medal at the Paris Exposition Universelle. In 1907 he designed a townhouse for Sara Delano Roosevelt on East 65th Street in New York. Eleanor Roosevelt called Charles A. Platt "an architect of great taste" who with the townhouse had "made the most of every inch of space." and in 1918, he de­si­gned the Freer Art Gal­lery in Wa­shing­ton. Book, Hard brown Cover. Title on the spine "The work of Charles A. Platt". Manufactural details on spine. Page no. 181. Black & white plates and plans. Stamped on page 43, 93, 123, 135, 161, 171"Picton Hopkins & Sons PTY.LTD"architecture design, domestic architecture, designs and plans, landscape gardening

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron medium single grooved set iron this iron is of a very bulky nature and is probably inferior manufacture. B & F stamped on bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

a) Nagaoka Record Anti-Static & Disc Guard Kit The Nagaoka STAT-10 is a record protecting agent that serves both to protect your records from static and to significantly reduce record and stylus wear. By using this product you will improve the sound that you hear from your records, but will also protect your records. The unique charge reducing formula significantly reduces the amount of static electricity present on the surface of the vinyl recording. It also reduces the irritating noise produced by the scratches present on the surface of the vinyl recording. This record protecting agent also contains a special lubricant / protecting fluid agent.This lubricant / protecting fluid reduces record wear so that your recordings are as good as new. b) 'PAROSTATIK' Disc preener -: Use while rotating record slowly on Turntable. Press gently during one or two revolutions. Dust collected on plush surface should be removed before re-use. Device has "built-in" anti-static requiring occasional moisture replacement. Remove cap from centre tube withdraw and moisten wick (when dry) with clean water and replace Always return "Parostatik" to case when not in use. Vinyl records became very popular mid 20thC and cleaners were used to preserve the audio quality of the record surface.A box containing Vinyl record cleaning equipment manufactured by a) Nagaoka Pty Ltd Japan and b) 'Parostatik' C.E Watts Pty Ltd England a ) Box : NAGAOKA / A / trademark / NAGAOKA / AUTOMATIC RECORD CLEANER / ORIGINAL BEST PRODUCTS / NAGAOKA & CO LTD. MADE IN JAPAN / AUTOMATIC / RECORD CLEANER / AUTO 1 / NAGAOKA ORIGINAL BEST PRODUCTS b) Packet ; THE / "PAROSTATIK" PATENT .... REGD./ IMPROVED / DISC PREENER / FOR PERFECT RECORD MAINTENANCE Cylinder; Watts / "PAROSTATIK" / DISC PREENER / For perfect record maintenancerecord players, music, vinyl records, moorabbin, bentleigh, cheltenham, japan, nagaoka pty ltd ,, watts c. e. pty ltd, parostatik disc preener, england

Negative print. Mine Winding Plant. A view of the winding plant manufactured by T.Harkness & Co ,Engineers, Bendigo. Also found in Box 62c,2400.208.12.cottage, miners, mine winding plant., mine winding plant.

Newspaper clipping headed 'Best barbed wire in war was invented in Australia' It tells of the invention and manufacture of '' Barblok '' barbed wire invented by H.A. Abbottnewspaper, bendigo, h.a.. abbott, world war two, h.a. abbott, barbed wire, barblok

Photograph 1994 of milling machine manufactured in Port Melbourne by O.C. Schumacher and now in the Bark Mill Museum, Swansea, Tasmania, a former flour millDetails in blue ink on back: 'Bark Mill Museum Swansea East coast Tasmania 1994'business and traders, industry - manufacturing, o c schumacher

Relates to 25.1 & 25.2Side of a timber packing case, slightly warped, nail holes in ends. Dry rot along bottom edge. Manufactured of pine wood, unfinished"Use Lotus Soap / for the / Laundry"advertising, lotus soap

Various garments associated with wedding January 1965.- Cream coloured - "A" line - 3/4 sleeves - slightly 'belled" - Organza lined - square neckline - Reputedly Georges manufacture (unlabeled) - C 1968Nilsilk, otterman, wedding, handmade, georges ltd

From the late Miss E. M. SebireClear glass whisky decanter with ground glass stopper. Has Peter Dawson's Scotch painted on decanter. Specially manufactured to commemorate centenary of Company. decanters

Leaflet gives uses and characteristics of 'Nulon' Nylon Bushes. Manufactured by A. K. Lever & Co. On the back are a number of question and answers about the nylon bushings.sciences, bill ashman collection - correspondence, nulon bushes, mcpherson's limited, a k lever & co

Australian Defence Industries (ADI) - Ordinance Factory Maribyrnong Australia brochure. Three sheet colour brochure on facilities and manufacturing, procedures at the Maribyrnong Facility.adi history, adi maribyrnong facilities

This bottle was used as a form of advertising for the Wodonga Business of Samuel Mason. Samuel Mason was born at Bethnal Green, a suburb of London in 1824. He came to Australia via California, landing in Sydney in 1847. After a return to the California goldfields Samuel returned to Australia, arriving in Albury, NSW in 1855. He opened a bakery in Albury, and also commenced the manufacture of ginger beer for which he gained a reputation across Australia. Mr Mason continued in business in Albury for some time, but he established himself in Wodonga c1857, continuing a branch business in Albury. Twice a month in the early days Mr Mason walked to Beechworth for the purpose of transacting business. Occasionally he was summoned to attend the Beechworth courts as a juror. In 1901 Mr Mason retired from business, handing over the reins to his only son, Mr Samuel Mason Jr. who continued the aerated water business for some years. In about 1920 the business changed hands, being take over by E. Bartel. Samuel Mason Sr. died on 6 April 1908 and is buried in Wodonga. Mr. Mason Jr. was a prominent townsman. For some years he was a councillor of the Town Riding of the Wodonga Shire Council. He was also the first chairman of the Wodonga Water Trust in 1908. Samuel Mason Jr. moved to Melbourne in March 1920, primarily due to failing health. He died on 6 February 1929 and was interred in Melbourne.This bottle has strong local significance as it is representative of one of the earliest businesses established in Wodonga in the 1850s which operated until c1920. The business continued after 1920 under different ownership and names.2 earthenware pottery bottles manufactured by Bendigo Pottery and imprinted with the business brand of S. Mason, Wodonga. One bottle still contains a marble as part of the Codd sealing system to prevent gas from the ginger beer seeping out and the drink going flat. The bottles Within two elliptical circles are painted (in freehand) "S. MASON" in the top half and "WODONGA" in the bottom half. These are separated by an asterisk on both sides. A large "S" overlaid by a similarly large "M" is within the inner circle. 2nd bottle also includes "BREWED GINGER BEER" above the brand. At bottom of bottle 1 "PINNACLE BRAND" At bottom of bottle 2 in an oval shape: "THE BENDIGO POTTERY CO./ EPSOM/BENDIGO"s. mason wodonga, aerated drinks, bendigo pottery

The design of the bottle is called a Codd, sometimes referred to as a marble bottle or "Codd's patent bottle". During the mid-to-late 1800s, there were many inventions to keep the fizz in carbonated drinks such as ginger ale, soda water, and fruit drinks. Hiram Codd, an English engineer invented a successful process that he patented as "Codd's patented globe stopper bottle" in 1872. The Codd-neck bottle (commonly called Codd or marble bottle) is manufactured in two parts. The body of the bottle is cast in two sections. At the time of joining the sections, glass marble and rubber seal are inserted into the neck section. The lip is then applied to the top of the bottle. The Codd bottle is filled upside down as the pressure of the gas from the carbonated liquid holds the marble up and out of the way. When the bottle stands upright the gas pushes the marble up against the washer, creating a firm seal to keep the fizz inside. The bottle is opened by pushing the marble down firmly to allow some of the gas to escape. The marble drops down and is caught in a depression formed in the neck. When the bottle is tilted to pour or drink the liquid the marble rests in a dimple. Two Ballarat miners, Evan Rowland and Robert Lewis started manufacturing mineral and aerated waters, bitters, cordials, and liqueurs in 1854, in a tent on the shores of Lake Wendouree Ballarat. Another 13 firms at that time employed manual operations, whereas they introduced Taylor's No. 1 machine that speeded up the process and laid the foundation for their fortune. Evan Rowland was a pioneer in the aerated water trade in Australia. He was born on August 2, 1826, in North Wales. In 1852, during the gold rush, he emigrated to Melbourne, and in 1854 he went to Ballarat and formed a partnership with Robert Lewis, the firm being called ‘‘Rowlands & Lewis’’. Their next step was to secure a supply of pure water. Using mineral Waters that they found via a natural spring at Warrenheip, Victoria. From the outset, the beverages made from this water gained repute and were in great demand. Their business prospered so well that in 1858 they were able to build a factory at the corner of Sturt and Dawson Streets, Ballarat, and to fit with the most up-to-date machinery then in use. By 1870 their business had increased so much and demand had grown to such an extent that Mr. Rowlands erected another factory, covering over an acre of ground at the corner of Dana and Doveton Streets, costing £13,000. The factory was fitted with the most modern equipment of the time to manufacture cordials and aerated water. In 1873 Rowlands established an agency at 116 Collins St, Melbourne, because the demand for the products of the Melbourne factory became so large. The company expanded to Sydney opening a factory at the corner of Burns & Hay Streets Darling Harbour obtaining spring water to supply this plant from Katoomba in the Blue Mountains. The water was brought to Sydney by rail. In the meantime, the Melbourne concern had progressed so rapidly that in 1888 a magnificent factory embodying all the latest ideas and equipment was built in King Street Melbourne. Robert Lewis was a fellow Welshman born in 1816, and he arrived in Port Phillip in 1853 and became a partner in the early day with Evan Rowland but with lesser and shorter involvement in the firm, from which he retired in 1876. Robert Lewis was perhaps better known as Ballarat's first mayor and a Member of the Legislative Assembly. He was a strong supporter of local charities, president/treasurer of the Eisteddfod Committee, a major force in the development of the Ballarat Hospital, and he was the mayor of Ballarat five times, the first in 1863, (having been a counsellor as early as 1859) and for the last time in 1881. Lewis died in 1884 of a stroke in Ballarat. Rowlands continued in the firm and invented and patented an improved soda water bottle. The water used in Rowlands products was filtered four times but his attempts to use local corks failed on quality grounds. He was a stickler for quality, which was so good that many outside Victoria were prepared to pay the 'premium' imposed by inter-colonial customs duty payable at that time. By the 1890s, Rowlands had factories in Ballarat, Melbourne, Sydney, and Newcastle. He died in 1894 but his company continued until well after the Second World War when it was sold to Schweppes.An early manufacturing process producing the first mineral waters in Australia was invented and developed by an early Welsh migrant to Australia. The Evan Rowlands story gives an insight into the early development of manufacturing industries in Australia that allowed their workers and the towns they were situated in to prosper and develop into what they are today. Bottle; clear glass Codd neck bottle with small marble in top. Once contained soda water or soft drink. Manufactured in 1921 by E. Rowlands of Ballarat, Melbourne, Katoomba and Sydney. The bottle is 'recyclable' - the message on the base says that it remains the property of E. Rowlands Pty Ltd."E. ROWLANDS BALLARAT MELBOURNE KATOOMBA AND SYDNEY". Imprinted into bas "1921" "THIS BOTTLE REMAINS THE PROPERTY OF E. ROWLANDS PTY LTD"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bottle, codd bottle, hiram codd, glass marble bottle, e. rowlands bottle manufacturer, soda bottle australia, early recyclable bottle, codd's patent bottle, marble bottle

The new Manufacturing Technology Training Centre (MTTC), a part of the proposed Building Construction Training Centre (BCTC), will be a purpose-built, stand-alone, fully fitted-out industry-standard facility. This new space will accommodate current course provision along with specialist training spaces for developing skill requirements in manufacturing technology such as robotics, mechatronics, engineering and industrial automation. Project funding was provided by the Education Investment Fund from the Australian Government Department of Education, Employment and Workplace Relations. The project budget is $18.09m, and the resulting building will have a floor space of 4,755m2. The Manufacturing Technology Training Centre is being built in conjunction with the Technical Education Centre (UBTec). While the buildings will have separate street identities the buildings will be joined with shared amenities areas. UBTec will provide a facility including individual learning spaces, learning studios, administration/office space, circulation, open plan learning space, staff common areas, computer rooms, meeting rooms, staff work areas and kitchen areas as well as car parking and site-wide amenities. While the buildings will have separate street identities the buildings will be joined with shared amenities areas. Funding for the UBTec component of the building is provided by Maintaining the Advantage: Skilled Victorians from the Victorian State Government. A colour poster prepared for the 'turning of the sod' at the site of the proposed University of Ballarat Manufacturing Technology Training Centre (MTTC), Grant Street, Ballarat. The poster was signed on Friday 7 October 2011 at about 11:15 am at the Building Construction Training Centre (BCTC), Grant Street, Ballarat by: Hon. Julia Gillard MP Hon. Catherine King MP (Ballarat ) Prof. David Battersby, Vice Chancellor, University of Ballarat Mayor, Cr Craig Fletcher, Mayor of the City of Ballarat appointed in December 2010 Mrs. Karen Douglas, Chair University of Ballarat Building & Infrastructure Committee The poster is signed by the Prime Minister of Australia, the Hon. Julia Gillard MP; Karen Douglas; the Hon. Catherine King MP (Ballarat ); Prof. David Battersby (Vice Chancellor); Craig Fletcher (Mayor, City of Ballarat)university of ballarat, david battersby, julia gillard, prime minister, catherine king, ubtec, karen douglas, manufacturing technology training centre, grant street, architecural feature